Scheduling agreement releases in ME84

Hi All,
I have create a scheduling agreement and maintained the same in a source list. The after I executed MRP (MD02) schedule line were created for the scheduling agreement from the MRP run.
But now when I go to Txn ME84 and try to create releases I do not get the scheduling agreement I created here. I have maintained the condition record for conditions LPH2 and LPJ2 in NACR. But still I get error as "No data for chosen selection" for my SA.
What am I missing here?
Regards,
V S

I checked further and found that the SA was not released. so released it in ME35.
But now again I get an error that "No schedule lines exist"
I get this error if the scedule lines have been created by MRP, buit if scedule lines are created manually in ME38 in ME84 schedule lines are released properly.
Any clues why it is so?

Similar Messages

Deactivate Scheduling Agreement Release Profile

Hi,
We have configured scheduling agreement release profile for JIT and forecast delivery schedules.
For some reasons we do not want to use the release profile, we do not wont schedule line release using ME84.
Can any one pls suggest how to deactivate the release and also if any other settings has to be unchecked.
Pls do the needful.
Regards,
Neha

Hi Prashanth,
Changing the setting from 2 to 1 in source list will not be relevant as schedule lines has to be generated while MRP run.
I understand that if the material is checked for JIT in material master and when the Doc type is LPA then the scheduling agreement automatimatically goes for release. Correct me if I am wrong.
Should the config setting for creation profile to be deleted from SPRO settings.
Pls lemme know.
Regards,
Neha

Scheduling Agreement Release Comparison

Hi Experts
does Scheduling agreement release comparison works for JIT delivery schedule (Doc Type LP) in SNC?
if yes then how it works and how it is different than forecast delivery schedule release comparison (Doc Type LPA)
Thanks

Hi Indira,
The are two ways to address your business case :
1. The simple way is to forward the work item to the concerned person (by selecting the user from user list) for releasing the work item.
2. In the second option, we need to modify the workflow. A conditional work item (Accept/Reject) needs to be inserted immdtly after the SA workitem to accept or reject the user decision. Based on the decision, the workitem will either show him the SAP user list to redirect the same for releasing or it should go to the concerned user automatically (in static agent assignment). In case of acceptance, it will go to next step bypassing the rejection loop.
In case of any further queries, please revert.
Regards,
Ashish J. K.

Scheduling Agreement Release Strategy Issue

Hi,
We have a typical problem in Scheduling Agreement Release Strategy.
Once the SA is released for the first time it should restart the release strategy again if there is a change in Quantity or Value or Purchasing group. The release strategy is getting restart for some of the release strategies and not for others. I compared the characteristics, class for both the release strategies and I am not seeing any difference.
Can anyone please help me in this regard.
Thanks in advance.
Regards
Ram

release strategy can be rerigger in case where qty or price change and the changes is over the percentage you defined for Release indicator
goto release indicator config and in SPRO for release strategy and check the Value change %
maintian 0.1 here
so any change above 0.1 will retrigger
and maintian value 4 in chgable field.

Delete/Stop Scheduling Agreement Release (Purchasing)

Hi,
I have a question concerning releases of a purchasing scheduling agreement in SAP APO. Basically very simple - how can I delete them or at least stop them? I did not find any transaction or report to do so (only for SD scheduling agreement releases). I know that there is a functionality of "dynamic stopping" of release done by the system but how can I do it manually? If there is no such function (which I could not really believe) what would be the business scenario to stop such a release (releases are created by APO, but I manually want to delete them). There has to be such functionality...
Many thanks in advance
Christian

Hi Christian,
Pl check this document..
if it helps that would be great for me..
http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/22/ec9d3b0ec10670e10000000a114084/frameset.htm
Thanks,
Bala.

Schedule Agreement release report

All,
Is there any report to have the Schedule agreement releases to be generated online or in background?
Kindly advice.
Thanks

Hi,
Pls go to ME3N, choose dynamic selection on the top
Release group
Release Strategy
Release indicator
Release status
Subject to release
and execute, you get the report accordingly.
Reward points
Thx
Raju

Print scheduling agreement release with zero demand

Hello all,
we have a print problem with purchasing scheduling agreements:
when I go to ME38 to the scheduling agreement release docu and print out the latest release which has a zero amount for scheduled quantity, I'll get the error message
no print relevant changes to document xxxx exist.
ME140
I know there are already some threads about this topic in the forums but I was not able to find a helpful answer yet.
Thanks
Anne

hi
please check the message which are already available status is "Green". if its green you have to create another message and you have to print it again..

How ro delete/cancel procurement Scheduling Agreement Release in APO system

Hi,
Can you please tell me the ways to delete procurement schedule agreement release in APO system.
I have gone through the thread "How to delete the old schedule line release? and found two transactions but it seems both the transactions like /sapapo/cmds_del & sappao/cmds_sc02 are used for sales scheduling agreement release deletion.
The system is not allowing me to delete the same in APO system as these are APO scheduling agreements.
Please help me on the same.Thanks in advance.Revert back if any further clarification is required.
regards,
kaushik

Hi,
Thanks for your reply again.
The /SAPAPO/DELETE_PP_ORDER program does not select the release schedule lines though it selects the Scheduling Agreement Schedule Line (Not released) for deletion.
The transaction /SAPAPO/PWBSRC2 for Deleting External Procurement Relationship but as long as the released schedule line exists , it is not possible to delete the scheduling agreements.
I have gone through the help.sap.com site and I was not able to found anything about deletion or cancel/closing of Scheduling Agreement Release.
Still waiting for the solution.
regards,
kaushik

Schedulling agreement release output issue/.........

Hi All,
This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
Can anybody help in resolving this issue?
Thanks in advance.

>
aakansha kumar wrote:
> Hi All,
>
> This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
>
> Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
>
> Can anybody help in resolving this issue?
>
> Thanks in advance.
Check if your output type is present in the output type determination in the following path:
Materials Management -> Purchasing -> Messages -> Output Control -> Message Determination Schemas -> Define Message Schema for Scheduling Agreement Release/Expediter
Also check the analysis tab while you check the SA release, it will give you clearer idea about the problem.
Regards,
Aroop

Schedule agreement releases

How I will come to know the Schedule Agreement is released or not in ME84? LPA is agreement type.
ME84 I have executed and next screen green light is coming.
But while going to ME33L and seeing Release number ,its 0.
Please explain how I can do this?
Thanks

Hi PS,
You need to output the last relase. Once you process it's output successfully, it would be considered. Otherwise not.
Any release which is not transmitted, is not considered as valid for use in SA.
Sanjeev
Edited by: Sanjeev Shrivastava on Mar 24, 2008 6:50 AM

Scheduling Agreement Release

Hi All
Scheduling agreement is created & released. Release indicator is 6, after the release again some line items are blocked & some line items are deleted without affecting any characteristic of release strategy
( No Change in value , Document type , Purchase group on which release strategy is based)
Wheteher release strategy will be reset in this condition form release to unrelease
Please suggest
Thanks in advance
Regards
Rajesh

Hi,
If no user exit is activated in support for your release strategy, then any change which results in no revision of your original value will not cause any release strategy reset.
Cheers,
HT

Scheduling agreement release in APO

Hey Gurus,
We are planning and releasing scheduling agreements in APO through the product view. The problem that we are having is that we can't see these released schedule lines in MD04 after the schedule lines are released in APO. Is there somethign with the CIF that needs to be set up for this? We already have integration models set up for PIR's and SchAgreements already.
Also, we checked the /SAPAPO/CCR reconciliation report and didn't see anythign stuck in there Do you guys have any suggestions for us?
Sincerely,
Kris

Hi Kris,
Please check the the distribution definition has been maintained for each location
SPRO:
Integration with SAP Components
Integration via APO Core Interface (CIF)
Basic Settings for Creating the System Landscape
Basic Settings for Data Transfer
Publication
Maintain Distribution Definition
Publication type: "confirmaiton for scheduling agreement"
Regards
Julien

Schedule Agreement release to SUS

Hello Experts,
We are implementing MM-SUS. I am new to SUS. Please let me know step by step configuration required to send Schedule lines created (ME38) for Schedule agreement (ME31L) to send to SUS.
I have run the transaction ME84. But it returns with Error code 26. No data for given selection.
Thanks in advacne.
Aakash.

HI Ravi,
I didnt get you.
What to check in XI and what status you want to know of ECC.
We have ECC 6.0. All mappings done in XI.
my problme is when i run transaction ME84, it is not creating any Idoc for DELINS.
Can you tell me how to get it done?

Scheduling agreement release response

Hi Experts,
In SRM 5.0 there is no response regarding scheduling agreement (SA), only Purchase Orders have response (POR).
Do you know if in SRM 6.0 there is response for SA??
Thanks and regards
Juliana

Hi Indira,
The are two ways to address your business case :
1. The simple way is to forward the work item to the concerned person (by selecting the user from user list) for releasing the work item.
2. In the second option, we need to modify the workflow. A conditional work item (Accept/Reject) needs to be inserted immdtly after the SA workitem to accept or reject the user decision. Based on the decision, the workitem will either show him the SAP user list to redirect the same for releasing or it should go to the concerned user automatically (in static agent assignment). In case of acceptance, it will go to next step bypassing the rejection loop.
In case of any further queries, please revert.
Regards,
Ashish J. K.

Scheduling agreement Release strategy release indicator

Hi all
For the Scheduling aggreement Release strategy is present & release indicator is 6 , Now the requirement is whenever user is changing the any value Scheduling agrrement it should go for rerelease. for any minor change in value even the value lies between the same Release strategy
Release strategy is configured on Purchase group & Value character
Also what is the difference between release indicator 4 & 6. for any changes in the SLA release strategy will be reset in this two release indicator.
Thanks & Regards,
Rajesh

Hi,
This is a standard phenomena any change in value (increase)will reset the release stategy
and indicator 4 & 6 are same only in case od indicator 6 if you have taken the oout also it will get affected

Scheduling agreement releases in ME84

Similar Messages

Maybe you are looking for