Scheduling agreement with relase - doc type LPA with JIT

Hi
can any one give the steps for Scheduling agreement with relase - doc type LPA with JIT process.. and explain how the JIT will work in SA.
Pls advise what are config required and what the user tcode needed to perform the SA with JIT concept.

Dear Friend,
Without release documentation(Document type LP)
The delivery schedule lines have official character-that is to say,they are transmitted to the vendor as they are saved in the system.The system does not document in detail releases aganist the scheduling agreement that have been sent to the vendor.Therefore,in the case of the document type without release documentation,the message control facility should be set up in such a way that a message is immediately sent to vendor if any changes are made to the delivey schedule stored in the system.
With release documnetation(Document type LPA)
If you use scheduling agreement with release documentation,the delivery schedule lines are not transmitted directly to the vendor.Intially ,the lines of the delivery schedule stored in the system for an LPA scheduling agreement for an internal information only.A message informing the vendor of your material requirements cannot be transmitted to the vendor until you explicitly create an SA release,that is forecast (FRC) or Just in Time(JIT) delivey schedule.Through this process,you can change the way schedule lines are represented.With release documentation,you can disply the SA releases(delivery schedules) transmitted to a vendor over a certain period of any time.This enables you to trace precisely when you sent which information to vendor.
Regards
Pramod

Similar Messages

  • VF11 wrongly created with RV Doc type and with not clear status.

    Hi All
    Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
      In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing  types) and it is in not clear status.
    2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
    Order Type  : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
    Order type:  ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.                                                
          FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
    The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
    I reviewed similar issues with SAP Note and with below explanation:
              "There are 2 procedures that are possible when Vf11 is posted.
              Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
              New Procedure - A Real FI reversal was carried out with clearing."
    In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
      My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
         Appreciate your answers or suggestions.
    Thanks in advance,
    Sunil
    Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

    Thank you Ivano.
      I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
      Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
      Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
      After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
      Thread is closed.
    Sunil

  • SA doc.type LPA

    Hi,
    we are trying to work with SA doc.type LPA
    Maintain:
    1.JIT indicator in Material master
    2.JIT indicator in SA additional data
    3.creation profile in SA additional data
    4.maint source list mrp relevant 2
    5.created message record  LPJ1 JIT Delivery Sched.(tcode mn10)
    6.created message record  LPJ2 JIT Delivery Sched.(tcode mn10)
    7.created message record  LPH1     ForecastDlv schedule
    (tcode  mn10)
    8.created message record  LPH2     ForecastDlv schedule
    (tcode  mn10)
    9.maintain SA delivery sehdule Tcode ME38
    10.WHILE CREATING RELEASES ME84 THE SYSTEM GIVE ERROR ( NO PROCESSING ERROR MESSAGE ME 857)
    HOW COME TO CORRECT THIS ERROR

    hi
    the message is f
    me 857  Not possible to determine valid ISO code for language
    so try finding the language used or relevent configuration
    language of plant and co code
    regards
    kunal

  • Text determination procedure with sales doc type

    For the Sales Doc type 'OR' , I am getting TEXT automatically in the Sales Order Header data , TEXT tab page.
    Can Any one tell me how can I remove the text, when i create sales order.
    Or please can any one give me the document or link or explain how the text determination procedure with sales doc type.

    Hi Sanjay,
    Thanks for your help.
    I managed to go there but I am really confused of what changes I have to do there.
    If you dont mind can you explain a bit in detail.
    Sorry for the trouble

  • By default - in STO P.O with UB doc type

    Hi,
    Experts
    When am creating a purchase order with NB doc. type in ITEM level Delivery Tab is there,if i check stock type field it is showing as quality inspection stockas bu default, bcz my material is totally activated with quality management , its ok but in case of STO with UB document type with same material its showing as by default unrestricted stock , why? Manually i can change to quality stock but i want by default it should come as quality stock in my STO Purcase order.
    My query is - why in case of  UB doc stock type field is showing as unrestricted stock instead of
    quality inspection stock
    Note- Material is toatally activated with QUALITY MANAGEMENT with both of PLANT.
    Thanks
    Sunil
    09878996821

    Hi Sunil
    As you are doing STO and you are doing quality check also then first of all check in the NB document type details that by default quality check has to be triggered .Also maintain quality check at delivery level also as you are doing STO
    Check in UB document type wheather the first option is unrestricted use, 2nd option is unrestricted and quality check and 3rd one is quality check  has been maintained. And in UB document type that feild might have been kept blank that is the reason you can scroll down and see all options. So maintain in UB document type the option Unrestricted use and quality check.
    Regards
    Srinath

  • Integration of ECC Scheduling Agreement (Doc Type LP) with SAP TM

    Hello Experts,
    I am trying to integrate ECC Scheduling Agreement (Doc Type LP) to create OTR in TM System. I have maintained below settings:
    1. Create and Activate Control Key
    2. Output determination procedure linked to LP has output type TRS0 with requirement 27 assigned.
    3. Output condition record has been created
    4. I have checked Business Functions are also active
    I was able to transfer other Document Types like OR; RE; FD (ECC Free of Charge); SDF (ECC Subsequent Delivery - Free of Charge); Consignment Fill up and Consignment Pick up by maintaining these settings, but not able to push Scheduling Agreement LP to TM.
    The output TRS0 is not appearing automatically and if I try to insert and execute this output in Scheduling agreement, Output is failing with error message: "Order is not TM-relevant"
    Is there any other config or mapping or SAP Note that needs to be applied to achieve this integration? Because I believe standard integration is available for ECC Scheduling agreement (I have read in help.sap.com).
    Thanks and Regards,
    Vikram Bhardwaj

    Hello Vikram,
    You mean this documentation:http://help.sap.com/saphelp_tm81/helpdata/en/9c/787f3c0a771e57e10000000a114084/content.htm?frameset=/en/44/b0488e9c35612be10000000a155369/frameset.htm ?
    I think there is talking about the integration for SCM Basis as SOS, not Order Integration.
    Regards, Marcelo Lauria

  • Posting of cross company transaction with different doc types

    Hi,
    The scenario is:-
    We have two companies X and Y.
    X makes a payment to Y with the following FI entries:-
    Company Code X
    Dr Vendor Y
    Cr Bank HDFC
    Company Code Y
    Dr Bank ICICI
    Cr Customer X
    Now this needs to be a cross company transaction where the doc type for CC X should be vendor Payment 'KZ' while the doc type for CC Y should be a customer reciept with doc type 'DZ'.
    Although I am able to map the accounts in cross company code config I am not able to split the transaction of different company codes with different document types.
    Is there any way we can do this in standard SAP?
    Thanks in advance,
    Nitish

    Hi
    As per your issue ...There are no possibilities to post   in sap with different document types.
    If you want you can post cross company code transactions with one document types
    Regards
    vamsi

  • PR generated with different doc type in rollout porject ....why?

    Dear Friends.
    We have done rollout.
    Earlier imlementation - c. code=A200 .
    Using standard document type-NB for PR generation.
    Latest Rollout - c. code =A100
    Using copy of standard document type NB as ZNB for PR generation.
    My problem is that when in A100 MRP runs it generates PR with doc. type-NB (NOT ZNB) why?
    same way PR generated by Plant maintanace module(PM) in doc.type-NB(Not ZNB) why?
    Regards,
    Mahesh.

    Hi,
    Check the below path of configuration, PR created with MRP run have different document type.
    SPROMM-Consumption based planningplanningprocurement proposalDefine external procurement.
    Hope it will help you
    Thanks

  • Accounting doc typelink with billing doc type

    Hi,
    I want to see the configuration settings to be done for the accounting document type whenever a Invoice is posted to accounting.Basically if a standard Invoice F2 is posted to accounting then an accounting doc type RV is created.So I would like to know where is the link between the invoice documnet type and accounting document type maintained in the system?

    Hi
    In T code VOFA  in the configuration of the billing type, i think in the control data tab ,there is a field called document type
    This is the field to get the accounting document type
    If that is left blank system takes RV by default
    If you maintain some other accounting doc type in that field, other than RV ,system will pick what you have assigned
    You can test this too
    The Standard  SAP configuration for F2 and many other billing types  that field is maintained blank
    Hence the system picks up RV accounting type automatically
    It is because of the background program ,which runs while billing doc which tells the system to pick RV accounting type ,if that field is left blank ( coding in SAP standard is maintained like that ,to pick RV if that field is left blank)
    Regards
    Raja

  • Change return order(Doc type: RE) with BAPI

    Hi Experts,
    I am trying to change material quantity return document(Doc type: RE) through BAPI.
    I have tried using BAPI : BAPI_CUSTOMERRETURN_CHANGE, but not able to change quantity, though the BAPI returns success message.
    Is there any other BAPI/FM available to achieve same functionality.
    Thanks,
    Sri.

    Is there any one who can throw some lights on this..

  • LSMW - create Scheduling Agreement for subcontracting position type

    Hi all,
    I want to use LSMW to create a scheduling agreement with position type L (subcontracting).
    I'm using Business Object Method BAPI with
    Business Object      BUS2013     
    Method               CREATE
    Message Type         PURSAG_CREATE
    Basic Type           PURSAG_CREATE01
    The LSMW creates the scheduling agreement with the list of material I inserted in my file but with position type 'blank'.
    any ideas?
    i read that the standard program RM06EEI0 don't support subcontracting, this is the reason of BAPI.
    thanks, MG

    Hi gurus!
    I forgot to put 'X' in E1BPMEOUTITEMX-ITEM_CAT so, even if i mapped the field, it was not updated.
    thanks a lot.
    problem solved.
    MG

  • Bidding - Create PO in backend with multiple doc type.

    Dear Friends,
    We are working on Bidding Cycle with classic scenario where we want follow-on document Purchase Order to be created with more than one document type.
    So we defined
    BSA attribute with ZPO & ZSRM and
    DP_PROC_TY attribute with ZPO & ZSRM.
    Due to DP_PROC_TY we are able to see two options for "Transaction Type for Purchase Order" (ZPO and ZSRM). However the PO is getting created with only one document type ZSRM.
    Am i missing any step in between?
    Or could this be a bug?
    Regards,
    Sandeep Parab

    Hi,
    See whether the foll note helps:
    Note 1059053 - BBP_BID_INV:Transaction type from quotations not taken in PO
    Else you can refer the suggestions given in the foll thread:
    Re: BE_DOC_TYPE => ECPO
    BR,
    Disha.
    <b>Pls reward full points for useful answers.</b>

  • Material Ledger with Split Valuation Type 'X' with FIFO

    Hi,
       The requirement from the customer is to have Raw Material, Intermediary and Finished Products valued at Actuals and on a FIFO basis. According to me, this is possible only if we activate Material Ledger, have batch split valuation u2018Xu2019 as the valuation type and have a batch search strategy which does a FIFO. Are there any technical issues with this solution? Or is there a better solution? Is any organisation ever using this solution for a similar requirement? As an extension of this requirement, how does commodity trading companies running in SAP handle their inventory and COGS valuation?
    Thanks and Regards
    Shivram.

    Hi,
    Using Material Ledger with batch management and split valuation of each batch ("X") leads to most aaccurate FIFO valuation result, however, depending on how many material and batch the customer has, huge number of materials will be processed and it will affect the performance issues. You should check the number and expected period-end time frame scheduling at least.
    Financial responsible tell you to need this kind of solution (detailed FIFO calculation)?
    They usualy needs to get simple FIFO valuation, meaning they don't care each individual logistic material movement as FIFO, but only care of periodic FIFO. I know, it depends on Finacial responsibes or their auditors, so it's also not general.
    Please double-check the new FIFO valuation function for Material Ledger with using Periodic Closing and AVR. Some information is in SAP Note 1431829 and 1247053. Related transactions are there, CKLMBB_xxxx under Actual Costing/Material Ledger -> Balance Sheet Valuation Procedures. I couldn't find any official documents for Material Ledger + FIFO valuation (like Release Notes).
    Hope this will be an additional option to yours.
    Best regards, Takashi

  • How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

    I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
    I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
    leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
    I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
    Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
    I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
    llustrate it.
    Many thanks in advance for your help.
    Donat-Pierre
    Attachments:
    Demo.acq ‏248 KB
    SCR_EKG_test1b.acq ‏97 KB

    The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
    See the attached example.
    The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
    CC
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Read_AK_time_info.vi.zip ‏9 KB

  • How can I read a binary file stream with many data type, as with AcqKnowled​ge physio binary data file?

    I would like to read in and write physiological data which was saved by Biopac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
    I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/app156FileFormat/FileFo​rmat.h
    tm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/app155macffmt/macff.ht​m) .
    I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, because it is for PC I am assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
    I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to illustrate it.
    Many thanks in advance for your help.
    Donat-Pierre

    One more step...
    short are U16 integer
    double are double precision float
    bool seem to be 2 bytes (= U16)
    char are string (variable length)
    rgb are U16 integer, with high order byte = 0
    rect should be 4 x U16 (top, left, bottom, right)
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

Maybe you are looking for