Scheduling and the Dates recieved after it

Hi,
If I use a Dynamic Scheduling ,and custumised an Intervals of 0 days (Order Creation- Scheduled MR Date , Order Download-Schedule MR Date..) -> All these will run in 1 day.
I've recieved a schedule records as I wanted,but what if I will create Order before the "Creat Order Date"? Is there any added Functionality of these dates?
Thank You very much !!
Michael.

Hi Kevin,
Thank you for your answer.
I want to perform Periodic Meter Readings on these dates,but what if I got Schedule Record to 01.12.2008 and on this date I want to Create the MR Orders,Output MR Orders , Upload Results and Bill. What will be if I will Create Orders on 30.11.2008,Output them on 01.12.2008, Upload and Bill on 03.12.2008 ? Is there any problems which may shown?
What can be if I Create MR Order,perform Move In-Move Out and Upload MR Result ? Or If I will perform Device Replacement after Creation of MR Order?
Thank You very much !
Michael.

Similar Messages

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Does this sort of software exist?

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Imagine a spreadsheet - each time a write something in a cell and press enter to go into the next cell, I need the app/software to automatically insert the corresponding dat and time. Does this sort of software exist?

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

BI process has gotten stuck and the data from CRM hasn't gotten updated

hai friends am working for BI in CRM....
BI process has gotten stuck and the data from CRM hasn't gotten updated in the BI cubes.
can any one help me to solve this issue???
WHAT MAY BE THE PROBLEM AND WHAT WILL BE THE SOLUTION???
IS THERE I NEED TO RESTART THE PROCESS CHAINS OR WHAT?

Is it already scheduled for a daily run or manually you are running the process chain?
If its manually running then you can select your process chain, and then right click on the start process --> Maintain variant --> Scheduling --> in the scheduler screen , you can click on the Immediate, save the changes and save in the next screen, once it comes back in the main screen, you have a scheduling Icon (Clock idoc). Click on it. Once done then it will be oK.
Or firs the process only failed, then you can right click on the failed process and then choose "Repeat" option to repeat the process.
Also you can check the source system connection is fine or not? RSa1 --> Source system --> CHECK
Edited by: Murali M on Sep 2, 2010 6:37 AM

Lost the access to the first partion of the firewire drive and the data ?

Hello to everybody,
after i moved 5,5GB Data from my internal harddisk, HFS+ , to my external Firewire drive, FAT 32 formatted for compatilibilty with a PC, i lost the access to the first partion of the firewire drive and the data. At first after having appearently finished copying the data a lot of ununderstable numbers and letters appeared on the first partion and couldn't be opened.
Using first aid showed the following messages:
1.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
2.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
Volume „FIRE2“ testing
** /dev/disk2s6
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
16 files, 726592 free (1880420 clusters)
Volume „FIRE 3“ testing
Mounting Disk** /dev/disk2s7
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
149 files, 2866032 free (441271 clusters)
Volume „FIRE 4“ testing
Mounting Disk** /dev/disk2s8
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
2755 files, 1396016 free (873683 clusters)
3 Volumes tested
0 HFS-Volumes tested
2 Volumes with an other type than HFS tested
1 Volume couldn't be tested
1 Volume wasn't tested
3.
First Aid interrupted the testing of "disk2s5" because the the following error has appeared:
the basic (????? ) process shows an error by finishing
German orignal message:
Das Festplatten-Dienstprogramm hat überprüfen „disk2s5“ unterbrochen, da der folgende Fehler aufgetreten ist:
Der zugrundeliegende Prozess meldete einen Fehler beim Beenden.
As i translated the First Aid messages from german to english they will probably look a bit different in english but i hope you get the idea.
So what can i do to regain access to the first partion and the data ?
If i have to use the terminal then please !!! step by step as i don't have any experience in using it
Greetings and thanks in advance for any hints
Lutz
PD: i was just arranging my data into different categories so could later burn a backup when this happened
g4 AGP 400 MHz Mac OS X (10.3.9) 768 MB SDRAM

Yep, you sure can. That's how I support my family's computers. I just entered their dynamic hostname in ARD, and it always updates their IP address in the ARD list should they have changed.

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

There are no scheduled and delivery dates in /sapapo/rrp4

Hi Gurus,
When executing the transaction /sapapo/rrp4, category PO memo are being displayed. But I noticed that there are PO memos that dont have scheduled and delivery dates while the others have. Is this behavior normal? But when compared to transaction /SAPAPO/RRP3, the PO memos that dont have dates in /SAPAPO/RRP4 have dates in transaction /SAPAPO/RRP3. Could you please help me understand why there are PO memos that dont have sheduled and delivery dates when using /SAPAPO/RRP4?
Thanks,
Ann

The rrp4 view shows only receipt elements, such as Planned orders, WIPs etc.In rrp3 view (Product view), we can see both requirement and receipt elements an pegging structure.

HT4886 When I try to reinstall the Server App it just shows installed and the date it was purchased. How can I reinstall it?

I bought a Mac Mini Server and after set up I realized that it was not set up as a mirrored raid system. So I followed the instructions on how to do that - this erased my drives. Restarted and reinstalled the Mountain Lion software but when I go to the app store it shows the server sotware in my purchases but there is no option for reinstall - it just shows INSTALLED and the date it was purchased.
Ho do I reinstall my server app?

Seems to have become available once again while downloading the update for Mountain Lion. I guess youjust have to wait a while for it to check your system and then make it available once more.

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

Unfortunately, it says I can't delete anything without the missing password.

HT4623 When updating my iphone i lost all of my apps and the data on the apps. How do I get them back?

When updating my iphone 4 for the first time I seem tohave lost all of my apps and the data on my apps. One of these apps was a camera and all of my photos are gone!! I had over 1000 pictures mostly of my children. I cant find them anywhere. Please help! How do i get all of my apps back with all of the data that was on them?? Thank you, LEC

app store - update - purchased - all/not on this phone - select the app you want to download by clicking on the cloud next to it.

Scheduling and the Dates recieved after it

Similar Messages

Maybe you are looking for