Scheduling error causing - ORA-00942: table or view does not exist

Hello
I have the following problem, I created an scenario that its supposed to run every 1 hour, it has an interface that moves an amount of records from one table to another (the amount of records is not fixed it changes). The problem arises when the amount of data to move is so big that the hour between executions is not enough and the scenario is still running when a second execution of the same scenario starts to run (as scheduled), so in the interface when the second process is trying to run the loading step it fails and I got the error ODI-1228 Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exists. So the scenario fails and it logs this error. I think the error is due to the table in stage being locked by the first execution of the scenario.
I don't want to change the amount of time between executions because it is usually enough, I just want to avoid the execution of a scenario when there is another execution of the same scenario still running, is there any way to do this?.
Thanks
LJ

Hello
Thanks for your answer, I already have the "Interval between repetitions" property set to 1 hour, but when one execution takes more than one hour the scheduler starts another and I have 2 processes accessing the same table and it is when I have a concurrence error on the staging table.
How can I ensure that I wont have two or more executions of the same scenario running at the same time?.
Thanks,
LJ

Similar Messages

Process chain failure SQL ERROR 942 ORA-00942:table or view does not exist

HI all,
We have a proces chain with 'ceate index' process type and got failed with an error as follows......
SQL ERROR 942 ORA-00942:table or view does not exist
Plz can anyone give solution for this error.
SATISH.

Hey Satish,
Please refer to this thread:
BRCONNECT fails with SQL error -942 at location ora_vers_get-1
I am sure the solution there should solve your problem. There are various other discussions about this error in the forum, I suggest you look through them for better understanding and additional material.
Cheers!!!
Manu.

SQL Error: ORA-00942: table or view does not exist + CX_RS_SQL_ERROR

HI ,
we are facing below issue while activating info object xxxxxxxx
" SQL Error: ORA-00942: table or view does not exist " and " CX_RS_SQL_ERROR "
can any one help us out to resolve this issue.
Thanks,
EDK......

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

ERROR ORA-00942: table or view does not exist

Hi:
I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
declare
gr sdo_georaster;
begin
select image into gr from gis.RasterImages where geoid=1 for update;
sdo_geor.generatePyramid(gr,'resampling=NN');
update gis.RasterImages set image=gr where geoid=1;
commit;
end;
I trying to create a pyramid,but the error appeared:
ERROR at line 1:
ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
ORA-06512: 在 line 5
I don't know why?
Anyone can help me?
Thanks.

Hi,
I think you are executing the select statement for schema X and the table is in the schema srnr.
And schema X is not having select privilege on the table 'students' present in schema srnr.
Goto schema srnr.
Execute the following statement:
grant select on students to X;
This will give schema X the privilege to query the table students present in srnr.
Regards,
Anupama

Error(20,22): PL/SQL: ORA-00942: table or view does not exist

I am getting currently getting an error when I try and insert into a table from a different schema from my Stored Procedure:
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am explicitly calling the table with the schema name infront i.e.
INSERT INTO SAPSR3.ZTREC_NAME_TYPE
MASTER_ID,
NAME_TYPE,
FAMILY_NAME,
FIRST_NAME,
MIDDLE_NAME,
TITLE
VALUES
In_MasterID,
In_NameType,
In_FamilyName,
In_FirstName,
In_MiddleName,
In_Title
I only get this error when I try and compile my stored procedure. If I try this insert not within a stored procedure (i.e. a blank script) it works perfectly.
Can anyone tell me what Im doing wrong?
Thanks.

Hi,
It sounds like you (the procedure owner) have privileges on that table only through a role.
Roles don't count in stored procedures created with AUTHID OWNER (which is the default).
Either
(1) Have user SAPSR3 grant the necessary privileges directly to you (or to PUBLIC), or
(2) change the procedure so that it runs with the caller's privileges, by adding AUTHID CURRENT_USER after the argument list but before the keyword IS (os AS) like this:
CREATE OR REPLACE PROCEDURE foo
( x IN NUMBER
AUTHID CURRENT_USER
IS ...

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

Error while deploying map: ORA-00942 Table or view does not exist

Hi OWB experts,
I'm having yet another problem with OWB, this time when I try to deploy a mapping I get this error:
ORA-06550: line 59, column 3:
PL/SQL: ORA-00942: table or view does not exist
DIM_01_ESTCON_MAP
ORA-06550: line 93, column 3:
PL/SQL: SQL Statement ignored
If I open the package that OWB created I see the errors:
CURSOR "DEDUP_SRC_0_IN2_c" IS
SELECT
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_ID" "ESTADOCONEXION_ID",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_COD_ESTCON" "ESTADOCONEXION_COD_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_DESC_ESTCON" "ESTADOCONEXION_DESC_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."STANDARD_TOTAL_COD_TTL" "STANDARD_TOTAL_COD_TTL"
FROM
(SELECT
DISTINCT
"DIM_01_ESTCON_MAP"."GET_CONST_CA_0_ESTADOCO" "ESTADOCONEXION_ID",
"ESTADOS"."ESTADO" "ESTADOCONEXION_COD_ESTCON",
"ESTADOS"."DESC_EST" "ESTADOCONEXION_DESC_ESTCON",
"DIM_01_ESTCON_MAP"."GET_TOTAL_C_0_TTLID" "STANDARD_TOTAL_COD_TTL"
FROM
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
WHERE
( estado LIKE 'EC%' )) "DEDUP_INPUT_SUBQUERY2$1";
Where AYADEV_LOCATION points to the module/schema/location where my source data is.
Now, I have defined three modules:
SOURCE, where I defined the tables and other objects from the original database (source data)
STAGE, where I am performing all the transformations; here I defined all the maps
TARGET, this holds the dimensions and fact tables.
Now all three modules point to different databases. The dblink for AYADEV_LOCATION has been created and shouldn't present any problems. The username that I'm using to log on to the source database is current and I can connect to it through SQL+ or any other program (TOAD, SQLDeveloper).
What could be happening here? I'm using OWB 10g R2, with Oracle DB 10g R2.
I'd really appreciate any help you could provide.
Best Regards,
--Osvaldo
[osantos]

Hi,
I'm still having problems but I found out why these tables are returning errors. The username I've been given by the DBA to connect to the database is CONSULTA, but this user is only for querying purposes, the actual objects reside on a differente schema, of course, which is PROD. So the line:
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
raises an exception because the table ESTADOS is not located on that schema, but on PROD. If I query the table from SQL Plus with:
SELECT *
FROM [email protected]@AYADEV_LOCATION
then there's no problem at all.
Why is this? How do I instruct OWB to point to the correct schema or to avoind fully qualifying the table name?
Please help me, I'm kind of confused here.
Best Regards,
--oswaldo.
[osantos]

ORA-00942: table or view does not exist in database control

Hi all,
i am getting "ORA-00942: table or view does not exist" error while accessing tablespaces from database control. i am able to access control files, redo log files everything fine, but not tablespaces.
database version ---> 10.2.0.1
OS ----> RedHat Enterprise Linux 4 U 2
but the database is working fine from SQL*Plus and other Editors. this error is only from database control. so what might be the cause.
Any Ideas ...........
Balaji

hi,
Have you tried to re register your database within OEM, CG

Java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist while invoking a DBAdapter

I have a WebService which is invoked , the request is routed through the mideator to the DBAdapter .DBAdapter interacts with the database and replies the result.
I send in the CreditCardNumber in the request and recieve its Status (VALID,INVALID). i get this error every time . i have tried almost every thing to fix this . Please help me with same .
Below is the complete error stacktrace.
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [getCreditValidationSelect], Descriptor name: [getCreditValidation.Creditcardinfo]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Thanks in advance

Can you please check the following
a. check the JNDI Configuration. ( check for the value used for XADatasourceName )
b. check the Data source created for the User.
c. Incase you have updated the existing JNDI then you need to update the adapter with the New Deployment Plan.
Thanks,
Sunil Gopal

Cannot insert PS_TXN ORA-00942 table or view does not exist

We are using jdev 11.1.1.4.0
We have two users in the database and various application modules which connect to these users using datasources
We have tested the application with applicatin module pooling enabled off to test for passivation and activation errors and the application works fine.
Also on our internal test enviorment which has more then 10 concurrent users the application works fine
But at UAT it has started suddenly to give errors Cannot insert in PS_TXN ORA-00942 table or view does not exist
When I see the data in PS_TXN tables in various users I can see that passivation has taken place for the same day when there sporadic errors have been reported all having the cause as ORA-00942 table or view does not exist.
But one strange thing that I have observed is that the COLLID column has sequence numbers interchanged for the users randomly, database user 1 has sequence number from database user 2 seq and vice a versa in COLLID
As far as this problem goes the passivation should have failed with ORA-00001 primary key voilated but that is not the case
May be the keys have still not got to a number where they collide.
But I am totally taken aback on such a behaviour and I am not sure how to correct it.
So we have two porblems here
1) why did this error come in first place PS_TXN ORA-00942 table or view does not exist
2) Why are the sequence numbers interchanged for the databse users ?
Edited by: user3067156 on Jun 19, 2012 3:12 AM

I got reply to my second question
It looks like a bug in the framework and the suggestions are to use only one ps_txn and ps_txn_seq by modifying the internal connection
But the first problem is not yet known why did it appear suddenly
Edited by: user3067156 on Jun 19, 2012 3:12 AM

ORA-06512: at "SYS.DBMS_XMLGEN", (ORA-00942: table or view does not exist)

Hey Guys, it's Xev.
I decide to use SQL and XML and it works in one scenario, but in another scenario, it doesn't.
Here is the Code, I am passing in two variables, First, I pass in the table_name and then i pass in the schema.
If I am doing this with the "user" connected and it's looking in it's own schema, it's find the results, like so, but if i try to execute this code while not
connected to the same user i am searching on i get this error.
ORA-19202: Error occurred in XML processing
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
19202. 00000 - "Error occurred in XML processing%s"
*Cause:    An error occurred when processing the XML function
*Action:   Check the given error message and fix the appropriate problem
This code works only of you are connected to the user that you are searching on.
But if you search for another user tables, it's blows up and gives the XML error above...
SET SERVEROUTPUT ON
exec DBMS_OUTPUT.ENABLE(1000000);
VAR search_string VARCHAR2(28)
EXEC :search_string := '^[0-9]{3}-[0-9]{2}-[0-9]{4}$'
COLUMN "Searchword"     FORMAT A28
COLUMN "Table"     FORMAT A9
COLUMN "Column/Value" FORMAT A50
SELECT DISTINCT SUBSTR (:search_string, 1, 28) "Searchword",
                 SUBSTR (table_name, 1, 14) "Table",
                 SUBSTR (t.column_value.getstringval (), 1, 50) "Column/Value"
    FROM   dba_tab_cols,
    --where owner = ('&SCHEMA_NAME')
            TABLE
              (XMLSEQUENCE
             (DBMS_XMLGEN.GETXMLTYPE
                ( 'SELECT ' || column_name ||
                 ' FROM ' || table_name ||
               ' WHERE REGEXP_LIKE
                     (' || column_name || ','''
                    || :search_string || ''')'
              ).extract ('ROWSET/ROW/*'))) t
--WHERE table_name IN ('FIND_TEST')
WHERE table_name = upper('&TABLE_NAME')
AND OWNER = upper('&SCHEMA_NAME')
ORDER BY "Table"
Can someone please explain how (DBMS_XMLGEN) works, and why it's throwing that error??
thanks,
Xev.

It has nothing to do with DBMS_XMLGEN.GETXMLTYPE. It simply means user executing your SQL has no select privilege on table &SCHEMA_NAME.&TABLE_NAME.
SY.

YTD, QTD and Year grain metrics = ORA-00942: table or view does not exist

Hi everyone,
I'm having a weird issue. I've got some GL data that I want to report on in three different grains: Quarter To Date, Year To Date and Entire Year. For the first two measures, I've setup a time dimension and I'm using the ToDate function. Works perfectly. For the third measure, I select the SUM aggregation and then in the Levels Tab, I go to my time dimension and set the logical level to "Year".
Each measure reports correctly by itself, however, when I join in the three in one report, the who thing blows up on me and gives me an ORA message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
When I only do two of the measures (any two), the report works fine. But it's when I add that third measure in, I get myself in trouble. Additionally, I checked the log file and the report never gets to the point where it generates a physical query. It's only creating a logical query and then it doesn't save the physical query anywhere.
Can anyone explain what the problem is? Why don't these three measures behave well together? What can I do to force them to co-operate?
It seems that the real culprit is the entire year measure. It only behaves well with 1 other measure, but once you get two additional measures, it causes the report to get the ORA error.
Thanks for any help you can give!
-Joe

It turns out I was incorrect that there were no physical queries being generated. They were there in the log files, they had so many SAWITH<number> clauses that I thought they were the logical query (i.e. saw_0, saw_1, etc).
Once I found the physical query, I ran it by hand and also got the table did not exist error. I added in WITH clause by with clause until I got the error to occur. After about an hour of digging, it turned out that a query using a full outer join (about 16 queries in) caused the table does not exist error. I'm not sure what it is about the full outer join that makes Oracle not see the table. When I get some free time I'll dig deeper into that issue.
But once I realized what was going on, I went into the DB connections and disabled FULL OUTER JOINs. No problem now.
Like I said, if I find what caused the original problem (i.e. what syntactically was incorrect about the FULL OUTER JOIN), I'll update this post.
-Joe

PL/SQL: ORA-00942: table or view does not exist

Hi
i have logged into my schema and trying to access the database "DAD" which has the table name "SCHOOL"
i wrote a function which should give me new_sno when i give it the old_sno
and i have this errors , pls help
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
NEW_SNO Number:=0;
BEGIN
SELECT new_sno AS NEW_SNO
FROM DAD.SCHOOL
WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN NEW_SNO;
END ORIG_SN;
Warning: Function created with compilation errors.
Errors for FUNCTION ORIG_SN:
LINE/COL ERROR
5/1 PL/SQL: SQL Statement ignored
6/15 PL/SQL: ORA-00942: table or view does not exist
Thanks in advance ..

Try this,
CREATE VIEW SCHOOL_VIEW AS SELECT * FROM DAD.SCHOOL;and then change your function like
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
my_new_sno Number:=0;
BEGIN
SELECT new_sno INTO my_new_sno FROM SCHOOL_VIEW WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN my_new_sno;
END ORIG_SN;and see if it is getting created without any errors.
-Arun
Edited by: Arunkumar Ramamoorthy on Aug 15, 2009 1:56 AM

Scheduling error causing - ORA-00942: table or view does not exist

Similar Messages

Maybe you are looking for