Scheduling is in scheduled state
hi,
I tried to burst the reports, so i wrote the bursting query for split by and deliver by and i go to schedule new job button.
i scheduled the job with enable the burst report option.
but the job is in scheduled state only, that is not reflect into history tab and that is not shown in history tab.
so what is the problem, please help me to resolve the issue
Regards
Am also facing the same issue. Any resolution for the above issue.
Regards,
Vinoth.
Similar Messages
-
Problem in Scheduling Agreement Delivery Schedule
Hi Guru's,
We have a one problem in scheduling agreement delivery schedule.We are having delivery schedule from 29.05.2007 to 02.09.2009.As per standard procedure while raising GR the system updates GR quantity in first open quantity delivery schedule and it will go one by one delivery schedule. But in our case we raised many GR's and it was updated like that.But recent one GR(quantity - 2736) has skipped four delivery schedule and it has updated fifth delivery schedule.
We dont know why system has skipped four delivery schedule.
Anyone aware the reason.If any procedure or indicator is there.
Please help us.
I have attached screen shot for your reference.
Points will be rewared.
Thanks in advance.
Best Regards,
Naga.Hi Tao,
Thank you so much for your reply.
I have created two delivery schduled,Afterwards I released second delivery schedule please note taht I did not released first delivery schedule.
Then I raised GR but the GR quantity is updating in first delivery schedule eventhough not released.As per your statement it has to update in second delivery schedule.But it is not working.
Kindly suggest to me, Whether my understing is correct or not.
I am expecting your valuable reply.
Thanks in advance.
Best Regards,
Nagapandian. -
MRP To Generate SCHEDULE LINES for Scheduling Agreement
Hi
I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
3. Create Scheduling agreement using ME31L
4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
During Run MRP for the material.the below details entered///
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Schedule lines 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 1 Determination of Basic Dates for Planned
Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
MRP1:
MRP Procedure: PD
MRP Group: 0000 (External Procurement only)
Lot Size: EX (Lot For Lot)
MRP2:
Procurement Type: F
Sched Margin Key: 000
MRP3:
Avilablity chec: 02 (Individual requirement)
MRP: 4
NilRaj,
Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
HOPE IT WILL WORK
Regards:
Poision -
Scheduling Agreement - Delivery schedule line number
Hi,
I am developing a report to show the Goods receipt postings for each delivery schedules of Schedule agreements.
I am not able to find Delivery Schedules line(EKET-ETENR) in Material document table(MSEG).
How do we exactly link the GR quantity to Scheduling agreement Delivery schedules.
We have line item number but not delivery schedules.
GR quantity may be posted to different delivery scheules and for some SAs when the MRP Runs it is positng randomly.
Is there function to find the link,
Searched EKBE, EKET, MSEG and other tables also.
Appreciate your help <offer removed by moderator>.
Satya
Edited by: Thomas Zloch on Jan 18, 2011 2:44 PMHi Shravan,
Thanks for answering, I checked those two tables EKEH, EKEK are release tables. We have some SAs without release documentation. I have to find the delivery schedules using the GR document to which delivery schedules the qty it is delivering.
It is not posting the qty from top of schedules, for some SAs it posted randomly.
Any other ideas or any function modules,
In BW it is possible using extractor but we need in R/3
Thanks,
Satya -
Creating Schedule lines in Scheduling agreement using LSMW
Hi,
I want to upload multiple schedule lines in scheduling agreement using LSMW. I have done the recording and maintained multiple lines in input file. However during execution LSMW creates only one line and keeps on ovewritting the same line. Please let me know how can I create multiple schedule lines.
RegardsFirst you should search for existing standard LSMW migration objects that possibly cover your scenario. These normally take care of complex header / multiple items / multiple subitems relations.
With a recording you can only load flat structures. Sometimes a "create new lines" / "enter first line" / "save transaction" logic can be constructed to load multiple items to a header (or even subitems to an item?) with a recording, but this can be pretty awkward.
Thomas -
Difference between Scheduling agreement delivery schedule and PO delivery s
Dear All,
Please tell the difference between the Scheduling agreement delivey schedule and PO delivery schdule.
In PO itself, we can give the delivery schedule.
Then what is the purpose of making scheduling agreement and maintain schedule in ME38?
RegardsHi,
Difference between Scheduling agreement and PO is while PO is a legal document whatever the delivery schedules you mention in PO, you are liable to pay for the entire qty in case of cancellation
In case of scheduling agreement, we have Firm Zone and Tradeoff Zone to provide some cushion against paying for the entire qty you have ordered
Firm zone: (go-ahead for production)
If the date of a schedule line lies within the firm zone, the vendor has the go-ahead to produce the relevant quantity with the assurance that the orderer will bear any and all material and production costs associated with the scheduled quantity in the event of subsequent cancellation by the latter.
Trade-off zone: (go-ahead for procurement of input materials)
If the date of a schedule line lies within the trade-off zone, the vendor has the go-ahead to purchase any input materials necessary to produce the scheduled quantity. The orderer will recompense him in full for such outlay (but not for any other production costs) in the event that he should subsequently cancel the scheduled quantity.
Schedule lines that lie beyond the firm and trade-off zones fall within the planning zone (forecast zone) and are for rough guidance only, being without any commitment on the part of the orderer.
In case of PO if you want to cancel the order, you are liable to pay for the entire quantity, while in case of Scheduling agreement if you want to cancel the schedule and if the days fall in Firm zone or trade off zone or planning zone you have to pay only for raw materials or assembled products according to the above description
Regards
Venkat -
Creation Profile in Scheduling Agreement and Schedule LIne
Dear Experts,
Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
2.I'm creating delivery schedule respect ot Scheduling agrrement.
3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
4.I run MRP for the header material and I maintain the necessary SA number in Source list.
5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
Please clarify me on creaion profile.
Thanks in advance
PKBDear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB -
Schedule lines for schedule agreement
Hi,
I need get all schedule lines for schedule agreement (all schedule lines = all visible in tab analysis u2013 all lines for all forecast dlv. sched).
I check table VBEP and VBEH and I canu2019t find all items.
Could you help?
Thanks in advance,
EHi Manju,
For this you need to set creation indoactor for planning run in SPRO.
The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
Traction code is omi8. Hope this will help you.
Cheers
Ravi -
SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?Hello Ricardo,
have you try a call like this one ?
<schedule>
<name>"test"</name>"
<format type=\"webi\"/>
<destination>
<inbox>
<to>userId1,userId2,userId3,groupId1,groupId12</to>
</inbox>
</destination>
</schedule>
Regards
Stephane -
Next JIT schedule date in Schedule Agreement
H, This is reg JIT - in Schedule Agreements
JIT schedules are created to day 10.02.2010 ..
In Creation profile for JIT, 'Changed or next date' is given & 'Weekly trans' option is chosen
I could see system calculated 'Next JIT sched' date as 15.02.2010 [Next week monday] , it is as expected
I created JIT today and i am not able to release today itself as part of testing solution. Even in production environment cant i release on same day of JIT schedules creation? why so ?
Help Says only those scheduling agreement items with respect to which the creation date is earlier than the current date are chosen for release generation."I found the issue ...
output message for JIT was an issue
when i see JIT out message type properties for this message, Print parameters field was set to blanck
When i chenged to Purchase Group, it worked ..
Can some one help me what effect it had in generating message, before that message was green but i was not able to genertae JIT schedules -
Redetermined the past due schedul lines in Scheduling agreement
Hi All,
We have an issue with past due schedule lines in scheduling agreement, the details are below.
Delivery date: 3rd Jan 2011 - Order qty is 100 no confirmtion. The system has proposed new date that is 19.01.2010 (System date) with full confirmation. The Scheduling agreement is not relevant for ATP check also. When we check with other plant scheduling agreement, it is not determining any new date, it is confirming on same date.
Different Document types used in two cases, but the config is same in both cases. Not sure why the system is determining to current date with full confirmation. Is there any config relevant to this.
Regards,
Lakshmikanthhi
schedule lines in scheduling agreements = correct & confirmed dates.
that means if you enter the date manually here system confirms that date as schedule line date.
compare those two plants and let me know if any difference is there in between.
check MMR RLT's MRP views
check Lead time in days - document types
check & confirm.
balajia -
Change Schedule line in Scheduling agreement by function.
I want to know that is enalbe to change schedule line in Scheduling agreement by function( 'BAPI' or Standard function).
I known that is possible by BDC.
But I have to change many records. So I want to know faster method.
Please let me know what function enbale that.
Thank you for your interest.Hi..
The Scheduling agreement is one which is created runing MRP not VA31.
I know that is two transaction data in SAP.
One is Sales Data other one is Purchasing Data.
This is second one.
Thank you your response. -
I am having trouble figuring this out. using the Set-CMClientSettings is it possible to modify the "Compliance Settings" "Schedule compliance evaluation" schedule. The default is every 7 days and I want to be able to modify
that.
Thanks
EricI just checked and I don't see a way to do this even with the R2 CU1 cmdlets. I would recommend filing a feedback on Connect regarding this here:
https://connect.microsoft.com/ConfigurationManagervnext
Check out my Configuration Manager blog at http://aka.ms/ameltzer -
I have two monthly scheduled iTunes allowances scheduled for my kids. For some reason they did not get transferred to their accounts this month.
@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter. -
If the reporting is scheduled, can the schedule be managed via Autosys
If the reporting is scheduled, can the schedule be managed via Autosys? Please describe.
Yes,
For ex: You have Information Broadcasting scheduled via process chain. Now you can have process chain trigger set by AutoSys. Using Autosys you can schedule SAP jobs across applications and platforms. -
Scheduling with route schedule
Hii frnds i have defined routess,,,,,,,worked on route determination but now I would like information n Scheduling with route schedule ...if anyone has snapshots or information regarding the same plss forward it to
[email protected]
Regards
MaddyChk this thread, hope will be useful.
https://forums.sdn.sap.com/click.jspa?searchID=4197732&messageID=3437969
Regards
AK
Reward points if helpful
Maybe you are looking for
-
Any std sap report on sales groupwise?
Hi SD experts, Kindly let me know is there any standard report from SAP on Sales groupwise. Thanx in advance regards Srihari
-
Error while trying to setup waterfall Chart in OBIEE 11.1.1.6.7
Hi All, I am working on the OBIEE 11.1.1.6.7 version. This upgrade to 11.1.1.6.7 was done recently from 11.1.1.6.2 version by running the latest patch downloads using Opatch functionality. Recently we had a requirement and I am trying to set up water
-
Error in generating Datasource for a view(EKBE)
Hi All, i require to make a view(ZDS_GRDETAILS) on top the table EKBE(History per Purchasing Document). I have used tables T001(Company Codes) and EKPO(Purchasing Document Item). Now there is no error when i activate the view. But when im trying to m
-
Latest episode from TV series "Lies
Latest episode from TV series "Lies & Secrets" hasn't downloaded automatically per the norm. Tunes wants to charge me the cost of this individual episode as if it doesn't recognize the Season as Purchased (despite Store's Season label states Purchase
-
Hi, my iphone 4 is stuck telefonu because put the wrong security code. And I can not connect to itunes to update telefonu. I get an error and would like to help me with information Thank you! [email protected]