Scheduling Lines not deleted during Product Heuristic

Hi All
During Planning run in PPDS, Surlplus Schedule lines are not getting deleted. The Heuristic using is Planning of Standard lots in 3 horizons. Earlier these schedule line were created based on Dependant demand. Since the dependant demand is deleted, we were expecting that the surplus schedule lines gets deleted during Planning run. But it is not happening.
Please note that the surplus schedule lines are well with in the Horizons defind in the heuristic.
Interesting point here is, in RRP3 view, if we execute variable heuristic using heuristic Planning of standard lots, it is perfectly deleting Excess Schedule lines
whereas it is not with heuristics Planning of standard lots in 3 horizons
Am I missing any settings here?
Please let me know
regards
Vijay

Hi Rohit
Thx
Let me implement and get back to you
Thank you very much again
regards
Vijay

Similar Messages

Schedule Lines not picked up in 2LIS_11_V_SSL

Dear All,
We have a new process setup for third party orders which are created with a load time of 50+ days.As soon as order is saved, Purchase Requisition (PR) is created on the shipping plant. This PR number is display in item schedule line
If customer is on credit hold at order creation time, the purchase requisition is not created. Order could be saved as u201Cincompleteu201D.
From what I see the first schedule line always created with order qty as 0 and it is being filled in the 2nd schedule line in some of the cases.
My problem is the SAP BW extraction for DS 2LIS_11_V_SSL hasn't picked up data for schedule lines for any of such type of orders into my ODS till date.
Is there any way to correct this or any manual way I can write a custom DS with FM to fill a similar extract structure like 2LIS_11_V_SSL, but it contains many dynamic fields which will get difficult to fetch manually ...
Please suggest ...

Hi ,
If scheduled line is deleted recordmode will be "R" and this will delete the whole line in DSO2.
If a schedule is then created or changed only new data coming from schedule line DSO will be added in DSO2 as a new line. This will corrupt values in DSO2
To handle this situation, replace the record mode of all the records to "X" from "R" in the start routine between DSO1-->DSO2.
Thanks

Can not delete a Production Order is the Sales order item is rejected?

Hello everyone,
I can not delete the production order as the Sales order line item is rejected.
Does anybody know if any configuration change is required or any work around?
Thank you,
BG

Hi,
Could you pl. explain how the production order is created?
Also did you try by choosing Function in the menu (CO02 transaction) & try to set deletion flag or Technically complete?
If so did you get any error message ?
Regards,
Senthilkumar

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Make to order production - schedule line not confirmed

Hi,
I created a " make to order production " having few normal materials & few supersession materials.
created PO, GR,invoice, all done.PO is updated in sales order.
Schedule line is automatically confirmed for normal materials, but not confirmed for supersession materials.
can anybody tell me , how schedule line can be automatically confirm for supersession materials.
Thanks.

Is your scenario a third party one? After you finished GR for the PO, have you checked inventory of those materials? But I still didn't understand what's difference between new material and "supersession" old one? New for what and old for what? Could you be more specific or any example will be helpful.

Deletion of schedule line not possible.

Hi,
We have an issue on Plant A that there is a schedule line for Plant B u2013 yet there is no requirement on Plant B. User can not seem to delete that line.How to delete that line.
Thanks in advance
Regards
Balu

Hi,
If u have access to SE14 Transaction code, give the E-table name and select Edit button.
There select Background radio button, Select delete data & click on Activate & Adjust database button.
similarly do it for F- fact table too.
REDDY.

Sales Order Schedule line not populating in the Production order

Queation: Is there a way to tell the system to look at the sales order, line item AND schedule line. It is displayed in MD04 but it doesn't carry over to the Production Order. We are a MTO and this information is relevant in a number of ways.
Please Help.

Vickie,
If you are using MTO scenario then when you run the MRP for the material, it will create a planned order for that sales order based on the dates calculated from the sales order schedule line (Shipping tab)...
So now when you convert the planned order to production order, all the sales order details will get copied.
try and revert back.
Swapnil

Schedule Lines not created from MRP

Hi !!
I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product
*but no schedule lines are created for the raw materials.*
Please Guide , Itz very urgent.
Regards
Rahul Bhardwaj
9909986406

Dear Rahul,
When u r running MRP maintain '3' for Delivery Schedules Field under MRP Control Parameters ( T Code MD02). Sheduling Agreement should be valid. If there is sufficient stock on hand compared with the requirement then system will not create any Schedule Lines. In material master of raw Materials on MRP2 view Procurement Type should be Maintained as 'F'. If u have maintained 'E' or 'X' then MRP run will not create schedule lines.
Regards
Sunil Kumar

MRP Run error " Schedule Lines not generating properly"

Hi Folks,
I am facing a typical issue with MRP Run.
Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
Note that the initial settings during MD02 remain same for all run.
I want only schedule lines to be generated but not PR.
Pls advise and provide input where the wrong might be.
Quick responce would be appreciated.
Regards
Shash

Dear shash,
Check with What are the MRP control Parameters values which you are using for the MRP run.
In MD02, For Deleivery schedules run with value 3 - That's - Schedule lines.
The other options are 1 No schedule lines
2 Schedule lines in the opening period.
check with this & revert back.
Regards
Mangalraj.S

Sales order Schedule line not showing in prod. order

Hi
I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number (10) and schedule line number (0001).
Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
Regards
Ganesh M

Hi,
When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines. The schedule line number serves internal purposes and does not, for
example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
Regards,
Santhamoorthy

Multiple schedule line and reschedule for product selection

Hi,
Is it possible to mainatine multiple sechedule line for sales order where product selection is active
Let me explain the problem in detail.
We are using product selection functionality while creating sales order. Say for example in VB11 transaction I have maintained A= A1, A2 and A3. Where A1 has stock 50, A2 has stock 30, A3 has stock 20. Suppose my sales order is 150 for material A. The reason used is 0004 'automatic'. So while creating the sales order, confirmed qty for A1=50, A2 =30 and A3
= 20. I have unconfirmed qty. 50. for this scenario, I need to enable a
partial delivery, 1st I need to let the customer know when my 100 pcs going to be delivered and 2nd when my balance 50 pcs going to be delivered. So in the sales order I need to maintain two schedule line , one for
confirmed 100 and another for unconfirmed 50. I am not able to do this.
I can maintain only one schedule line per main item and at the sub item
level not possible to maintain.
The second problem is that, when I get stock for unconfirmed 50, I can
not reschedule. can anyone please help to solve this issue?
Regards,
Beena

goto item and doublle click on item and goto schedule lines and chenage the shedule lines..
wat i know is by avaiblity check it propose the delievry dates of items...
goto MM02 and mrp 1.. you can give there days to producee..
OR doc type propose delivery dates.. lead days...
hope it helps
you
ramki

Schedule line not determined

the following is the data:
1) the order is standard order type
2) the schedule line category is consumption MRP with production allocation
3)Item category is TAN
4)the material is externally procurred and sold from the stock mainatined in company's plant
5)customer is one-time customer
Now for the above data when I create a standard sales order, I am not getting the scehdule line for the item and hence the quantity is not getting confirmed.

hi rupali,
1. go to VOV5, please check the determination i.e
item category+MRP type= schedule line cat
2. check the item category (vov7) where u wl find the field schedule line allowed in the in the right hand side . please check it.
cheers
reward

Schedule lines not updating while using the BAPI_SCHEDULE_MAINTAIN

Hi all,
I am using BAPI_SCHEDULE_MAINTAIN to change the schedule line delivery date and schedule line quantity
while i was changing using t-code ME38 it is changing but while using the above mentioned BAPI i am getting the below errors
1)Instance PurchSchedagreement of object type <schedule agreement no> could not be changed
2)Delivery date outside period covered by factory calendar H2.
Any idea??
Regards,
Satishreddy.

Issue Resolved

JSESSIONID not deleted during SSO logout

We have a ADF/Struts webapp on OracleAS 10.1.2.0.2 protected by SSO (mod_osso). When a user logs off from SSO, all a success mark is shown from each partner app where the user was logged in (including our application), but the remains logged in to the webapp nevertheless.
I have tracked the problem down to the JSESSIONID cookie, which causes the user to be logged in the application as long as the cookie is present. All the strictly SSO-related cookies are deleted during the logout except the JSESSIONID for the SSO partner webapp. The user is always correctly logged out from e.g. OIDDAS after logout.
After logout, if I go and destroy the cookie either by manually deleting it from my browser or by closing the web browser, mod_osso shows immediately the SSO login page. i hav also verified by tracing the HTTP traffic that it is the JSESSIONID cookie that causes this behaviour.
In Metalink article Note:258200.1, it is said that JSESSIONID cookie is not directly related to SSO so why is it a key factor when deciding whether a user actually is logged off from the application? Furthermore, the metalink article clearly states that the JSESSIONID cookie is deleted during logout (which is not the case).
As far as I remember, we have never been able to see it working in our setup.
Can mod_osso/SSO/whatever be configured do delete the JSESSIONID during the SSO log off or what would be the correct way to get the logoff working? Furthermore, shouldn't mod_osso actually ignore the JSESSIONID cookie and only care about the SSO-related cookies when deciding whether to allow the user in?
TIA,
Markus

We solved the problem by implementing a Servlet filter that takes care of invalidating the user session if the user has logged out (either explicitly or through Global User Inactivity Timeout).
The solution follows the guidelines described in
Oracle Identity Management Application Developer's Guide section "9.4.1 Single Sign-Off and Application Logout" (http://download-uk.oracle.com/docs/cd/B14099_19/idmanage.1012/b14087/mod_osso.htm#BJFGAGIA)
IMHO, the solution is a bit overkill, but it solved the problem. We haven't yet tried the solutions proposed by Rodrigo.

Scheduling Lines not deleted during Product Heuristic

Similar Messages

Maybe you are looking for