Scheduling transports into prod

Hello,
We are running Solution Manager 7.0 SP15 and we have a requirement to import normal corrections into the production systems on Sunday morning at 4:30.
I for one do not want to wake up every Sunday to change the maintenance cycle of each system to "go-live" and then back to "development with release" in order to allow the transports to production.
There must be a way to automate/schedule this process.
Management wants to use only normal corrections for the Sunday transports.
Thank you!

Why would you want to change your Maintenance Cycle back to in development with release?
Once you finish your maintenance cycle every week you should create a new one
In order to move the transports into Q or P automatically you can either schedule a job for the report /TMWFLOW/SCMA_BTCH_SYNC_UC which runs every 10mins and thus imports all transport for a specific Project for a particular System and Client.
Another possibility is to schedule the automatic mass import of all transport in the Q/P-import queue, via STMS. This will schedule the Report TMS_BCI_START_SERVICE (jobname TMS_0000000001TMS_TP_IMPORT)
Nesimi

Similar Messages

  • Bex Queries not transported into prod

    Hi,
    I have transported few queries to prod thru transport conn, created bex transportable req and assigned to package and transported to prod
    but i could not able to find those queries in prod
    can anyone give some suggestions wht could be the problem or am i missin something
    thanks

    Hi,
    I have already tried with Query Designer --> open Queries .... there were no queries and even i am unable to find infoarea's (but i can see the infoarea's in RSA1)  and searched with Metadata Repository.. there were no queries
    i have transported successfully
    i have not transported roles along with Queries
    thanks

  • After transportation into prod datasource showing under DEV client

    Hi Frnds,
    I am transporting a cube with data flow before. After successful transportation of the objects Datasource showing is under DEV client not under Prod client.
    What might be the problem? Whether Am I missing any steps?
    Regards,
    sridhar

    Hi,
    There should be 2 Columns: 1) Orginal Logical system: Here you should enter the Source system's Logical name of BI DEV System( i.e DEV R/3 )
    2) Target Source system :Here you should enter the Source system's Logical name of BI Prod System( i.e Prod R/3 )
    Regards,
    Anil Kumar Sharma .P

  • Best Practice: Migrating transports to Prod (system down etc.)

    Hi all
    This is more of a process and governance question as opposed to a ChaRM question.
    We use ChaRM to migrate transports to Production systems. For example, we have a Minor BAU Release (every 2 weeks), a Minor Initiative Release (every 4 weeks) and a Major Release (every 3 months).
    We realise that some of the major releases may require SAP to be taken offline. But what is SAP Best practice for ANY release into Production? i.e. for our Minor BAU Release we never shut down any Production systems, never stop batch jobs, never lock users etc.
    What does SAP recommend when migrating transports to Prod?
    Thanks
    Shaun

    Have you checked out the "Two Value Releases Per Year" whitepaper for SAP recommendations?  Section 6 is applicable.
    Lifetime Support by SAP » Two Value Releases per Year
    The "real-world" answer is going to depend on how risk-adverse versus downtime adverse your company is.  I think most companies would choose to keep the systems running except when SAP forces an outage or there is a real risk of data corruption (some data conversions and data loads, for example).
    Specific to your minor BAU releases, it may be wise to make a process whereby anything that requires a production shutdown, stopped batch jobs, locked users, etc. needs to be in a different release type. But if you don't have the kind of control, your process will need to allow for these things to happen with those releases.
    Also, with regards to stopping batch jobs in the real world, you always need to balance the desire to take full advantage of the available systems versus the pain of managing the variations.  If your batch schedule is full, how are you going to make sure the critical jobs complete on time when you do need to take the system down?  If it isn't full, why do you need that time?  Can you make sure only non-critical batch jobs run during those times?  Do you have a good method of implementing an alternate batch schedule when need be?

  • How to get DEV Integration Server into Prod SLD?

    Hello,
    in a two-tier landscape I need to define transport targets in SLD. Both PI syetems have their own SLD. In each SLD there is just the Integration server of the corresponding PI system. How to get the DEV Integration Server into PROD sld? Manually?
    Thanks,
    CHRISTOPH

    Hello Seshagiri,
    that is what I wanted to know. So there seem to be two possibilities:
    - Creating the DEV Integration Server in productive SLD manually
    - Exporting the DEV Integration Server from DEV SLD and import it into productive SLD.
    I tried importing / exporting SLD content some time ago. AFAIK there is no exporting single technical / business systems, you can just export all the content together from a SLD?
    Thanks,
    Christoph

  • Scheduled transports (automatic transports) missing transports

    Hi
    We have scheduled/automatic transports set up, i.e. SAP standard job imports all released transports from DEV into QA on the hour and the half hour. This normally works fine...
    However, our developers have noticed a few transports have not been applied to QA. On further investigation it looks as if any transports released EXACTLY on the hour, or half hour, are NOT imported into QA. The job seems to miss these!
    Anyone come across this / know how to fix? It's not easy to check if any transports have been missed either, any easy way of doing this would also be beneficial in case we can't fix this, we need to know what has been missed...
    We're on tp patch 165 (700), last few fixes documented in latest version (214) don't say anything about this.
    Cheers
    Ross

    Thanks both.
    Yoganand, yes we could perhaps use a script instead to schedule transports or write a script to look for missed transports and import them... will look into this, but shouldn't have to - SAP standard functionality should work!
    Suman, thanks, but this isn't the case - half an hour / an hour later, still not imported - in fact, they never appear in the buffer on these odd occasions. Developer releases it exactly on the hour/half hour and it looks like a successful release to them. However, it never appears in the buffer/is never imported. It's as if it tries to add to the buffer but because the scheduled transport is taking place, cannot... logs show that it WAS added to the buffer - but checked and nothing there.
    Regards
    Ross

  • Probelms while replicating Data Source and transport into test system

    I find  the following error messages whilre transporting into test system.
    DataSource 0EC_PCA_1 does not exist in source system of version A.
    Mapping between data source 0EC_PCA_1 and source system  is inconsistent.
    DataSource 0EC_PCA_1 does not exist in source system  of version A.
    Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
    any ideas please..........
    Enhanced the Extract structure and activated the data source in Source system
    Replicate the Data source in BI  and install the Infosource through BI Content  activated and transport them to Test system.

    Hi,
    1.First transport the data source from R/3 dev to R/3 quality
    2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you  data source may not appear)
    3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
      activate these info objects and collect in another request
    4.transport these info objects from BI dev to  BI quality
    5.transport entire data source to bw quality.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

  • Reg. ALV output transported into Excel

    Dear All,
                   when i transported my ALV report output to excel file , amount column is suppressed from decimal places .
    i.e. in excel file ,  decimal values of amount column is not shown in some amounts.
    Please provide some inputs
    Thanks & Regards
    shailesh

    Hi ,
    Check this [LINK|ALV List output to Excel file; for  ALV output transported into Excel.
    hope it will help you .
    Regards,
    Saravana.S

  • How to track transporter of scheduled transport (TMS)?

    Prior to audit requirement,basis has been asked by auditor to provide all the selected transport lists and the name of the transporters for each selected transports.The problem is,most of the transports have been done through TMS (Schedule) and transporter cannot be tracked using SE16 and tplog because for sheduled transport,TMS will be captured as a transporter. Anybody here can advise me on this?

    Hi Ali,
    I strongly recommend to use the proper forum for this and your other request (How to track transporter of scheduled transport (TMS)?  )with the same question....
    So please close these 2 threads and post it in Software Logistics
    There the chance is better to get the required information...
    b.rgds, Bernhard

  • Action Transport into sandbox in urgen correction SDHF???

    Hi Expert,
    We face a problem in the action transport into sandbox during an urgen correction, the solution manager not recognize the sandbox system. Any help please!
    The role of the sandbox is " evaluation system"
    The error is the following:
    An action was terminated due to an exceptional situation.
    Message no. SOCM_ACTION_LOG 090
    Unable to find system Sanbox for task
    /TMWFLOW/SCMA_TRORDER_IMPORT_H
    /TMWFLOW/TASK_START:E:/TMWFLOW/TASKLIST:213
    Exception CX_SOCM_POSTCONDITION_VIOLATED occurred (program:
    CL_CHM1_INSTANCE==============CP, include:
    CL_CHM1_INSTANCE==============CM001, line: 59).
    Best Regard,

    Hello Brizes,
    You might want to look at SAP Note 1094449 -  "Change Request Management: Transport copies to sandbox", for help on this problem. Also please use SAP Note 1290986 - "ChaRM - Guidance of transporting copies to other systems", as a reference.
    Regards,
    Paul

  • Transporting into a new BW system from a shared dev system

    We are currently in the process of setting up a new BW system in the same landscape as our existing one where both boxes will share the same dev system.  Our existing one is used by many different applications and has tonnes of shared objects on it.  Our new box will only be used for SEM-BCS and thus does not need everything else that the other box contains.  Since many objects are dependant on others (attributes and such) I am finding it hard to get transports into the new system.  There always seems to be something missing even when I try to just move a single object.  I also seem to be having troubles with InfoObject Catalogs where they cannot be moved if the InfoObjects are not there and the InfoObjects a cannot be moved with the Catalogs not there.  This is all starting to give me a serious headache.
    Has anyone delt with transporting to separate systems from a common development system?  What is the best approach to this to ensure we only move what we need to the new system?

    The transporting is the same, however there are a lot of dependant objects that also need to be brought into our system.  I'm looking for a way to minimize what I need to transport into our new system.
    Collecting automatically doesn;t seem to be working for me since it does not collect everything I need and when I add that missing object I then seem to be missing another list of objects.  It seems to be a never ending cycle.

  • Error when transported to prod 0VTYPE_TEXT

    Hi exp,
    I got the following error when transported to prod 0VTYPE_TEXT
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    so i tried to activate the trasformation in dev and transported,
    now i got the following error
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Message no. RSTRAN802
    can advice
    kris...

    Hi Meera, shashank,ashish,
    i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
    data source 0VTYPE_TEXT is been activated in R/3 SS and replicated  to BIP as well and its active
    when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
    PSA /BIC/B0000649 does not exist in log.
    i observe that even though request failed with errors, DTP still deleted but not transformations.
    one thing i found,
    I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
    is this error cause?
    i did collected all objects and transported, still errors throwing the folling messages
    No rule exists
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
    thank you for advice,
    krish...

  • ChaRM Action 'Transport into Sandbox System'

    Hi,
    How the action 'Transport into Sandbox System' works.
    Wanted to know how this action works & in TMS do we need to map sandbox client.
    From sand

    Hi PK,
    answer is Yes for the STMS and also you need to have a system defined as single type within maintenance cycle you re working in. Solman will be using your tasklist structure to understand which system is supposed to receive the import
    Since a couple of stacks it became possible to actually define the role type of system that is supposed to receive the import of TR. I mean by role type the kind of system like you define in STMS when declaring a logical component
    Regards
    Khalil

  • QA Testing and transport to PROD

    Can anyone explain in detail the steps involved in QA testing till transport to PROD.
    objects are : new report , new table , zFM
    Is there anything specific to be done in QA for new tables.Or it can simply be transported.
    Is there anything to be done after transport to PROD.
    what all should be done in QA Testing?pls explain with terms involved(variants etc.)
    Thanks a lot in advance.

    for report and FM nothing specific...
    for Tables... first the request of the structure need to be moved and then the table contents... else the other way... the transport will fails..

  • Importing Scheduler tables into RPD.

    Hi All,
    I have a requirement like importing the Scheduler tables into Repository file(RPD).
    Can any one have the document of doing it, like physical links and logical links diagrams and how to join it.
    Regards,
    Vishwanath

    Hi Daan,
    My requirement is to use the job manager Scheduler Tables in the RPD, But not the usage tracking.
    tables are : S_NQ_JOB,S_NQ_JOB_PARAM,S_NQ_ERR_MSG,S_NQ_INSTANCE
    Its an urgent issue.
    Thanks in advance.
    Regards,
    Vishwanath

Maybe you are looking for

  • JTextField and String

    Hi, I have this few lines : JLabel LNSociete = new JLabel( "Nom "); LNSociete.setBounds(160,5,100,20); c.add(LNSociete); INSociete = new JTextField(); INSociete.setBounds(210,5,150,20); c.add(INSociete); LNSociete.setLabelFor( INSociete); NICC = INSo

  • Help... white screen

    Ok i was downloading a new adobe flash update for mac and when i went to install it asked me to close out of any browsers.... so i did.... then it starts running slow and freezes up which is just what computers love to do.... not so much with macs th

  • Laptop drive as an external?

    While I'm waiting for my MBP to arrive I began thinking about what I can salvage from my pismo (MB fried). I spoke with the local Apple store, and their tech guys use a FW case that takes a hd from a laptop. They use it to transfer data from an old l

  • Display Large Float w/o Scientific Notation

    I have a series of dollar amounts (from an SQL cursor) that I am summing up using a java.lang.Float. The values total correctly, but when I display the value it is displayed using Scientific Notation (4.19150150185925 E12). I need to write my total v

  • UAT with Test Script

    hi give me description about UAT with Test Script  in MM