Scheduling WCS Guest User Accounts

Hi all,
I am question concerning scheduling WCS guest user accounts. I would appreciate having opportunity to schedule WCS guest account as a lobby ambassador. I know it is possible to do that but only in case that you allow (as administrator) for the user "lobby ambassador" set up "lifetime" to unlimited. If you set up a limited lifetime in "Defaults for creating Guest User accounts", the lobby ambassador is not able to schedule WCS guest account because this options is missing.
Is it possible to do that without this restriction?
The second issue is the email which consists of the guest user account credentials. Each time the scheduled time comes up, the guest user account credentials are emailed to the specified email address.
Is it possible to send the credentials right after creating the guest user account and not when the scheduled time comes up which can be a week later?
Jozef

No this should not be done because, the credentials are pushed by WCS to the controller only when the time comes.
Once the WLC confirms the user is created, then WCS goes ahead and send you the credentials.
Technically this could be added to WCS, it would be a PERs : Personnal Enhancement Request to be filed from your System Engineer, Account / Sales team

Similar Messages

  • Cisco WCS guest user expires after few days

    1) Hardware we are using:
    WCS version 6.0.196.
    WLC version 6.0
    2) Configuration steps we carried out:
    We have created guest user using Lobby admin account having for accessing WLC which we are having in network. it works fine for some days but after that we have observed the particular guest user account status showing expired on WCS. Wanted to mention we have used Unlimited tab for life time while creating guest user account. The Account life time for guest user at the point of configuration was showing ( status -- Active, Account Lifetime -- Never Expire)
    The document we followed.
    http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0manag.html#wp1086189
    3) Problem we are facing.
    After some days(we are not sure about how many days) the guest users account shows "Expired"
    4) Requirement.
    Configuration of particular user with account life time as never exipre.
    Regards,
    Pramod.

    During the point of problem from WCS logs I observed the "Guestuser Service" is giving problem, below is the error. The detailed log is attached herewith.
    14:11:39.488 ERROR[general] [24] [GuestUserService] User does not belong to group 'Lobby Ambassador' or defaults are not set COMMON-11,LobbyAmbDefaults
    The issue is associated with mentioned bug
    CSCti79856
    Symptom:
    WCS deletes the Guest User Template when trying to de-provision it from a controller. Instead of deleting the guest user from the selected controllers, the user is removed from all controllers and the template deleted from WCS.
    Conditions:
    Using the delete functionality on the Guest User Template Page
    After upgrading WCS version from 6.0.196.0 to 7.0.172.0 issue was resolved. Thanks..

  • Disabling the unlimited Lifetime option in Cisco WCS Guest User Creation

    Is there  a way to disable the unlimited Lifetime option in Cisco WCS Guest User Add/Schedule tab.If i make those fields uneditable, it just takes out the option to schedule any meetings in future.Using Cisco WCS version 7.0.220.0.

    i'm also searching for an solution to disable the unlimited lifetime button for the Lobby Ambassador.
    could it that Cisco introduces this maybe a future release?
    couldn't be that there are only few people who are disappointed with this solution.
    My Customer is thinking now that cisco isn't the right solution for him.

  • WCS Guest User Credentials print

    We encounter a minor but annoying issue when creating guest user accounts on our Wireless Control system.
    Once a guest user is created our reception often faces the need to print the new guest user out on paper, when printing the system always print an extra blank page, which is just a wasted page.
    As far as we can identify by viewing the source code for the Guest User Account Credentials page there is a parameter that causes this extra page to happened.
    <p style="page-break-after: always;">
    Since I doubt it will be something Cisco will spend a lot of resources on, I've been looking for the actual piece of code that creates this page in order to update the style sheet so it doesn’t produce this extra blank page, but so far without success.
    Any one got a pointer to what scripts / files that handles this part ?
    Note
    This has been observed on WCS version 6.0.202.0 and 7.0.164.0
    Any feedback is appriciated.

    Hi Kayle
    Yes thats an work around or just simple select what page to print during the print dialog.
    This is one of those situation that you know the system has an anoying error but at the same time also knowing that its by no way critical.
    I'll see if I cant report is as a bug and maybe it will be corrected in a furture release or maybe we have taken other means innto use before that.
    Thanks for your reply.

  • I can no longer see my account name, but get a Guest user account, I can no longer see my account name, but get a Guest user account

    I can no longer see my account name so I can gain access to my information, but now all I get is a Guest user account and it won't let me log into that account. All it lests me do is re-start the computer and use it in restricted mode. Can someone please help me!

    Recommendation for your consideration
    Hopefully your original user account was an "administrator". I have two admin accts in case one admin. acct gets "trashed.
    Lets see what other forum members offer: my solution requires use of terminal and works. CLI (Command Line Interface) might be intimidating for you but we'll see what others possibly offer.
    As I say the solution I have works well and will allow you to create new user(s) replacing your former users whatever type they were. I promise to check back today if no solution to you is offered...
    Let 'er rip and...
    cheers

  • How do i get rid of the guest user account on my mac?

    The guest user account keeps appearing on my login screen and i want to get rid of it, i do not want others to be able to access my account. How am i able to do this? I have tried to go on through the user section and nothing i seem to do in there helps. Please help!

    You don't want to get rid of, it's a security feature. If someone steals your Mac, all that account permits is Safari access, no other access to the computer. This enables you to locate your Mac.

  • Having trouble setting up Guest users account email address

    Hi.I've been using my Macmail with my administrative account for some time now.I recently set up a guest user account for a visiting reletive.I wanted to get the "Macmail" e-mail program up and running as well so they could use the same e-mail address that I use with my administrative account.After clicking on the Macmail icon in the dock and going through the steps to set up the account......I was then able to successfully send out and recieve a test e-mail. However...........after logging out of the guest account and back to my administrative account and then logging back into the guest account again.........when I now click on the Macmail icon in the dock........the e-mail program starts asking me to go through the steps to set an email program up again.It seems to have "forgotten" or disregarded that I already did this the last time I was logged in.I'm wondering why its doing this and how do I permanently set up this email account so that it doesn't disappear every time I log out? Thanks for any assistance.

    Files created while using a guest account are deleted when the user logs out. A temporary home folder is created for the guest’s files. When the they log out, the home folder and it’s contents are deleted.
    Instead create a standard non-admin account...
    Create a new User go to System Preferences > Accounts > "+"
    -mj

  • Guest user account logged into while away from house/computer!!!

    Warning: I am not a tech-pro!
    Okay, I have a 2011 Mac Book Pro running OS X LION 10.75 (11G63) unsure what those last numbers mean but they were there so I thought perhaps it might be helpful to add them.
    Recently I moved into a granny flat and pay $10 a week to use their unlimited internet wifi. I log into my wifi through this device called a WiFi Repeater? It's plugged into the wall in my unit, as I warned I am not incredibly tech savvy so I am only guessing when I say I suppose this extends the main wifi signal from the actual home owners upstairs big modem? Any who.... A few times I have seen in the Finder Memu ot says 'Shared' and under that 'Wendys PC' (Wendy is the homeowner) then if you click on it it tries to connect but won't or there is a 'Connect As' option which brings up a little screen saying - connect as wendy, which requires a password or connect as guest which doesn't look like it requires a password- I'm not certain because I've never tried to connect any further, I only pressed that initial connect button when I had mentioned to Wendy I could see her PC & she asked me to press connect & prove I could not in fact connect (I'm starting to despise the word 'connect' since having to type this post about connection). So... We just kind of let it go. It did really worry me that Wendy (who worked in the tech field for years in particular with an Internet provider, could possibly connect to my computer and nosey through all my files- and to be honest, that would not actually suprise me. She is incredibly 'inquisitive'... And that's putting it mildly. I do have a password on my Mac Book Pro but I don't think that would be that hard to break through/hack if you have the knowledge/software. And yes, I do have confidential files on there! Banking/business/private photos (I'm trying to lose weight so take one nude photo per day to do a time lapse of myself in a year or two- obviously for myself not for others eyes lol and I would literally die in the *** if someone ever saw these). So basically I have good reason to protect my privacy. As does everyone! Anyway my first question is - Could she log in and how could I tell if she had? Now, the second part of this ridiculously long question (my apologies) is I was logged into my personal account all last night & this morning. As I stated- it IS password protected. The user account is not. Before I went out (and I can't actually recall if I closed the lid or not when I rushed out today... Usually I do but maybe I didnt... Whatevs) So, I get home and activate the screen by moving my finger on the touch pad and lo & behold I'm straight away looking at a totally different screen? It took me a few seconds to realise why my desktop looked completely different with none of my files etc... It was - as you've probably guessed- because I was in fact in the guest user account. Now, I didn't even have to click ON 'Guest User' as I normally have to. When you turn my Mac on it always comes up with - 'My Full Name' (one account login) and then 'Guest User' (the second account login option).... So you HAVE to choose which one you want! But my screen was straight away logged into the Guest Users desktop! I did NOT do this guys! So, of course now I'm extremely concerned that either she, her husband or their son whom is visiting for the weekend - have either a) logged in remotely on one of their computers or b) have come into my home and tried logging in & then forgot to log out of the guest account. I want to know if there is any way to find out what they did, what they opened if they did, how to stop it from both happening at all or if my suspicions are in fact happeninh AGAIN   And I guess on a more personal, less tech involved note - how would you all deal with such a situation? Let it go? Or be upfront about the fears/concerns I am experiencing since moving in just over a month ago. AND most importantly - IS there any other reason -other than someone physically logging into my guest user account & failing/forgetting to log back out so that when I got home & activated my screen I was actually looking at the guest user desktop's account instead of the Mail application screen in the 'My Full Name' password protected user account where I had actually left it before rushing out.... Like, is there ANY other possibly explanation for my user account being logged into when I'd left it on my own account t before I left that doesn't include someone in the house hacking/breaking into/snooping through my Mac? Also- you should understand that when I leave my Mac for just a few minutes I have it set up so that the computer screen 'sleeps' (I'm assuming that's the correct term) so that if for instance -exactly like this morning- I have to rush out and don't want to/don't have time to save work/quit applications/shut down etc... I can walk away leaving the laptop as is knowing within a few minutes the screen saver comes up (and if that's ledr for long enough it goes into sleep mode) and no one can actually enter my private account without my password. I feel safe knowing that.
    Sorry.... I FELT safe.
    I'm truly sorry for how long-winded this question has become, I simply wanted to give anyone possibly willing to help me sort out this issue, as much information as possible. I think I have actually only posted here once before (I find these sort of forums quite intimidating) and I often see people getting bashed for not providing enough information. So, I'm pretty sure I'll get picked on for too many words if anything!!?! Lol
    Thank you, in advance for your help!
    Olivia;-).

    Ouch.
    Not easily. You could try data recovery software... maybe SubRosaSoft's File Salvage or the like.

  • I want to get rid of my guest user account. It will not let me delete it from the user

    I did not have the guest user account available and then after I changed some of my setting for my mail, I noticed that when I logged back in the guest user icon was present.  I do not want to have this guest user account on my log in screen.  I tried to delete it from my system preferences but all it does is disable the guest user but the icon still appears. I need some help!

    http://osxdaily.com/2011/10/13/disable-guest-user-account-mac-os-x-10-7-2-login- screen/
    Thanks to Brad Caldwell for the questions and screenshot via Twitter, you can follow us there too.
    How to disable that “Guest User” from appearing at the OS X 10.7.2 login screen
    Open System Preferences
    Click on “Security & Privacy”
    Click the lock in the lower corner and type in your administrative password to unlock the control panel
    Check the box next to “Disable restarting to Safari when screen is locked”
    This prevents the Guest User account from being visible at the login screen both during reboot and at the login screen. Again, it’s highly recommended to keep this enabled for security purposes, but if your Mac is locked down with a security cable or you don’t have any use for Find My Mac, you could disable this and not feel too bad about it.

  • How to retrieve guest user account backup

    I have an iMac and a time capsule.  A large number of pictures were loaded into I Photo in the guest account of my iMac.  I cannot now find these pictures as I understand that guest accounts are wiped clean each time the guest account is lodged out from.
    Given that we did not log out from the quest account for a couple of days, i am hopeful that the guest account was backed up by time capsule.  I cannot find the guest account on the backed up time capsule.  Does anyone have any suggestions whether TC backs up the guest account and if so, how can I locate it in TC.
    Thanks very much.  David

    Did you have the main account logged in as well as guest at the time? Do you have TM setup in the guest account?
    It is very unlikely TM backed it up. If it did simply mount the sparsebundle in finder and go through all the folders until you find the guest user account and check if there is anything there. If not sorry it was never backed up.
    The only solution I can see if to use a recovery software for the camera. Whatever source of the photos was.. stop using the memory card in that camera now.. use the recovery software as the files will be there until overwritten for the next lot of pictures.
    Pondini has all the info for recovery of files from TM.
    See Q15 here. http://pondini.org/TM/FAQ.html
    There is a section for iphoto.. but IMHO it won't be backed up.

  • How to disable guest user account on iMAC

    I upgraded to Lion and now I have a guest user account on the log in screen. I want to disable this account. How do I get rid of it?

    System Preferences > Users & Groups > Guest User (you may need to authenticate) and uncheck "Allow guests to log in to this computer".

  • How to delete Guest User Account

    I just got my Mac book Pro and I'm new to Mac. I created a Guest User Account and now I want to delete it. But the - (minus) option is grey out. How can I delete the Guest User Account? I have two accounts listed right now. The Admin and the Guest Account. Thanks for your help.
    p.s. I just found out I couldn't even open the folders under the Guest directory! How come? I am the Admin and should be able to do that. What did I do wrong? Help!!!

    I should also say that sometime in the future you might have a problem with something, and one of the first things you should test is, do you have the same problem in another account, so having a Guest Account is a good thing.
    You just log in as Guest and test to see if you have the same problem. So it might be a good idea to leave it active, for it takes up very little space. I always have more than one Account, and this new Guest Account sounds good to me, I like the idea that everything is deleted after log off.

  • Question about ISE guest user account self registration

    Dear Sir,
    We will plan guest solution for my wireless network ( we have WLC5508 and 1142 access point ), our requirement is :
    1. guest user access to an wireless guest SSID, open browser, it will redirect to web-auth page.
    2. The web-auth page have a url and if user click the url, guest user then connect to another web page, guest user can input some information ( for examples : username, email, cell phone ,,, ) to create guest user account self. The expiration of the user account fix to one day.
    3. the username and random password created for the guest user then send by SMS or email to guest user.
    4. Guest user can use the username and password he received to login web-auth page to use guest wireless network
    5. User activity information ( user create, login/logout, expire time, user IP address ... ) should be log.
    Please help to verify the ISE with base license can meet our requirement. ( especially item 2 & 3 )
    Best Regards,

    Hi,
    Guest registration is covered with base licenses.
    Here is some material that will bring you up to speed:
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
    Base:
    Capabilities: Basic network access and guest access
    Network deployment support: Wired, wireless, and VPN
    License prerequisite: None
    Perpetual license
    Licenses are available for 100, 250, 500, 1000, 1500, 2500, 3500, 5000, 10,000, 25,000, 50,000, and 100,000 endpoints
    Tarik Admani
    *Please rate helpful posts*

  • OS X 10.9.2 Guest User Account keeps showing up even though it is listed as 'off' in Users & Groups

    Hi all,
    This problem just happened these last 2 days, and I believe it started after the itunes 11.2 and camera raw 11.2 update on 16 May 2014.
    The "guest user" login keeps appearing in the Login screen, i've checked the status of it in my 'System Preference / User & Groups' in 2 Admin accounts, both lists it as 'off'.
    I've tried enabling it, restarting, disabling it and restarting my macbook pro, but the guest user account just stays on the login screen.
    Could someone please help me out on this? thank you for your kind advice and help!

    Hi Esquared,
    Nope, Find My Mac is not activated under my iCloud settings. Checked both Admin accounts, both are unchecked.
    I did see this article before, but some of the steps, specifically the one in System Preferences / Security & Privcy / General is not applicable for OS Mavericks.
    Thank you for the tip, but sadly the guest user account somehow is still active.

  • Two Guest User accounts?

    I just updated my iMac to Mavericks.  I had two guest user accounts that were visible by clicking on the account name on the upper right of the window or by restarting and viewing the account icons.  I turned off allowing Guest User in System Preferences / Users and Groups and now there is only one Guest User, but there should be none. 

    Thanks for your response.  I followed your suggestion, but nothing has changed, even after a restart.  I don't see any discussion in the Find My Mac help articles that say anything about the Guest Account.  But I do seem to recall seeing something, perhaps in another discussion.
    When I'm in System Preferences / Users & Groups, I see the Guest User and right underneath it is "Off".  I also have unchecked the Find My Mac box in iCloud.  Yet I can still log in as a Guest User, run Safari, and log out.  Very strange.

Maybe you are looking for

  • Jam Packs and "Garageband Instruments" when reinstalling Logic?

    What's the proper procedure when it comes to Jam Packs and 3rd party Apple Loops libraries when reinstalling Logic and OS X? I'm keeping my Apple Loops on a separate drive and know that I can just drag them to the Loop Browser after reinstalling Logi

  • CO-PA External Data Transfer

    Hello people I am trying to use KEFC to load data from an external flat file (txt) a) I used  Define Data Interface KEFA using CE3XXXX Y CE4XXXX tables. b) I used Maintain Transfer Rules KEFB,  defining for characteristics the sender field and for ra

  • Flash Player crashing on every code execution

    Every time I run this code my flash player (projector) is crashing. function ftwoB(event:MouseEvent) {      navigateToURL(new URLRequest("lessons/lesson2/reading")); ¿Any idea why? ¿Any suggestions? Thanks

  • Valuation class & material type

    Hi all , Can anyone plz tell me the answer on following What establishes the relationship between a valuation class and material type A.     Valuation grouping code B.     G/L account C.     Valuation category D.     Valuation grouping code. E.     A

  • Passing parameters to like condition

    hi all, i am trying to pass a parameters from a form to a report and use this parameter in a where condition of the sql query , my problem is that i need to use this parameter in a like statment to bring all the records which are like this parameter