Scheduling with route schedule
Hii frnds i have defined routess,,,,,,,worked on route determination but now I would like information n Scheduling with route schedule ...if anyone has snapshots or information regarding the same plss forward it to
[email protected]
Regards
Maddy
Chk this thread, hope will be useful.
https://forums.sdn.sap.com/click.jspa?searchID=4197732&messageID=3437969
Regards
AK
Reward points if helpful
Similar Messages
-
Hi Every one
Help me out in Configuring Delivery scheduling, Transportation scheduling & Route determination. Hope I maintaind all the things but still i am unable to get. So i would like to check it out with ur suggestions.
Thanks & RegardsHi Srinivasa rao
ROUTE DETERMINATION
Step: 1
Maintain Purchase Organization
Path: SproEnterprise StructureDefinitionMaterials ManagementMaintain Purchasing Organization.
Step: 2
Create Purchasing Group
Path: SproMaterials ManagementPurchasingCreate Purchasing Group.
Step: 3
Maintain Transportation Planning Point to Company Code.
Path: SproEnterprise StructureDefinitionLogistics ExecutionMaintain Transportation Planning Point
Step: 3A
Assign Transportation planning point to company code.
Step: 4
Assign Purchasing Organization to Company Code.
Path: SproEnterprise StructureAssignmentMaterials managementAssign Purchasing Organization to Company Code.
Step: 5
Assign Purchasing Organization to Plant.
Path: SproEnterprise StructureAssignmentMaterials management-- Assign Purchasing Organization to Plant
Step: 6
Create Vendor Account Group
Path: ImgFinancial AccountingAccounts Receivables and Accounts PayablesCustomer AccountsVendor AccountsMaster DataPreparations for Creating Vendor Master Data--Define Account Group
Step: 8
Create Vendor
T-Code: XK01
Step: 9
Define Modes of Transport
Path: SproLogistics ExecutionTransportationBasic Transportation Function---RoutesDefine RoutesDefine Modes of Transport.
Step: 9A
Define Shipping Types
Path: Under the Same Menu path---Define Shipping Types
Select New Entries and Assign the Shipping Type (e.g. Road or Train) and Assign Mode of Transport (Mdtr) and Assign Shipping type Procedure group.
Step: 9B
Define Transportation Connection Point
Path: Under the Same Menu path--- Define Transportation Connection Point.
Step: 9C
Define Routes and Stages.
Path: Under the Same Menu path--- Define Routes and Stages.
Select the New Entries and Enter the Details
Then Select the Routes stages and define
Step: 9D
Maintain Stages for all Routes.
Path: Under the Same Menu path---Maintain Stages for all Routes.
Step: 10
ROUTE DETERMINATION
Define Transportation Zone
Path: SproLogistics ExecutionTransportationBasic Transportation Function---RoutesRoute DeterminationDefine Transportation Zone.
Step: 10A
Maintain County and Transportation Zone for Shipping Point.
Path: Under the Same Menu path--- Maintain County and Transportation Zone for Shipping Point.
Select the Shipping point and enter the Country and Transportation Zone
Step: 10B
Define Transportation Groups.
Path: Under the Same Menu path---Define Transportation Groups
step: 10D
Maintain Route Determination
Path: Under the Same Menu path--Maintain Route Determination.
Select New Entries and Define the Route Determination.
SHIPMENTS
Path: SproLogistics ExecutionTransportationBasic Transportation FunctionShipments
Step: 11
Define Shipment Types
Path: SproLogistics ExecutionTransportationBasic Transportation FunctionShipmentsDefine Shipment Types.
Select the New Entries and define Shipment Type
Step: 12
Go to Customer master data.
In Address of General data. Enter the Transportation Zone id. and save
U will get the route.
If u want in detail with screen shot, provide ur mail id. i will send it to u.
ROUTE SHEDULING
1.Scheduling With Route Schedule For Shipping Point
Route schedules (previously referred to in the system as delivery phases in this step) describe the periodic delivery of goods from a shipping point to different ship-to parties and their unloading points.
Here you specify per shipping point whether this sort of periodicity is generally required.
Requirements
f you want to define route schedules, you must perform the following activities:
1. Define routes
2. Activate delivery scheduling
Standard settings
The control function without determination of route schedules is delivered with the system.
Further notes
Route schedules can be determined for deliveries, orders and stock transfer orders.
2.Scheduling With Route Schedule For Sales Document Type
Route schedules describe regular outgoing delivery of goods from a shipping point to different ship-to parties and their unloading points.
This is where you configure whether you want this to apply to a given sales document.
Requirements
If you want to define route schedules, you must complete the following activities:
1. Define routes
2. Activate shipping dates
Standard settings
Controlling without determination of route schedules.
Further notes
Route schedules can only be determined for deliveries.
3.Scheduling With Route Schedule For Delivery Type
Route schedules describe regular outgoing delivery of goods from a shipping point to different ship-to parties and their unloading points.
This is where you configure whether you want this to apply to a given delivery type.
Requirements
If you want to define route schedules, you must complete the following activities:
1. Define routes
2. Activate shipping dates
Standard settings
Controlling without determination of route schedules.
Further notes
Route schedules can only be determined for deliveries
Reward if it is useful to u.
Message was edited by:
narendran vajravelu -
Server 2008 R2: Setting up a custom schedule with task scheduler
I am trying to schedule a task using Server 2008 R2 Task Scheduler
I've been googling and searching for an answer on how to do this. I could easily do it on Server 2003.
I need to run a program (custom) that updates some tables in a database.
I need to run it Monday thru Saturday at 20 minutes after the hour from 7:20 am through 5:20pm. Not on Sunday and not at night (only normal business hours)
These are the steps I am following: I create task, General, I enter the description, Then triggers, new, select weekly, select start date and time, select the days I want (every day except sunday), repeat the task every hour, for a duration of (all I can
choose is 12 hours).. This is where I am stuck. I guess I could choose 12 hours but I need it to stop at 5:20 pm not 7:20pm. Has anybody done something similar to this?Go ahead and choose something appropriate in dropdowns on Edit Trigger then over-type them with whatever you want.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Calculation of goods issue date in scheduling agreements with routes
Hello together,
i have a problem with the calculation of goods issue date in scheduling agreements when we use route, because the system ignore the days of transit.
Example:
We had customized the route 4711 with a transit time of 3 days. This route would be related to a scheduling agreement. But this setting has no influence to the calculation of the goods issue date for the schedules. The same happens with loading date and so on.
Can anyone give me a tip, which setting is additional necessary?
Regards
Andreas WalterHi,
check the following settings
1, Route determination Path : IMG>sales and distribution>Basic function>Routes>Route determination
2, Activate the route Determination for your sales document type in following path :IMG>sales and distribution>Basic function>Routes>Route Schedule Determination-->Schedule with route schedule for sales document type
3, Maintain Delivery scheduling and transportation scheduling in the following path:IMG>sales and distribution>Basic function>Delivery scheduling and transportation scheduling>Maintain Duration
Regards
Senya -
Determinate route schedule in SD order VBEP-AULWE
Hi all,
I want to activate route schedule :
- I have a route schedule masterdata (VL51) : for one route, one shipping point and one sold-to party
- I have actived scheduling with route schedule for my shipping point and for my sales document type (spro > LE > shipping > basic shipping > routes > routes schedule determination)
- my shipping point has a working time and a value in "pick pack time in work hours".
In my order, route and shipping point are determinate but not the schedule route (field VBEP-AULWE)
I don't solve the problem, I've you got an idea ?
Thanks a lot !!
CelineDoes anyone found a solution in the meantime?
I maintained all the mentioned settings but route scheduling for the relevant shipping point is still not working. I have only success when I add receiving hours for the specific day at the customer master of partner WE. But this cannot be the solution. If so I wouldn't need the route scheduling functionality.
What is the minimum requirement to get route scheduling to work? Maybe I missed something.
Is it really mandatory to maintain working hours for the shipping point? At note 146829, point 3.2 it's written that working hours are only necessary when I want to get "precise" scheduling results. I don't want this, determination on a day basis is precise enough.
Best regards,
Stefan
Edited by: Stefan Engel on Feb 16, 2010 12:54 PM -
LSMW VL51 Route Schedule Master
Hi Experts,
I am doing a LSMW conversion for tcode VL51 and facing problems while executing step "Run Batch Input Session".
My file layout is like this:
023 753/005/MK
87 default 01 01
88 default 02 01
While processing session, system is creating Route Schedule with the first line item only i.e. 87 default 01 ....etc.
Have processed the session in Foreground mode and noticed that, Route Schedule after getting created for the first item, is coming back to the VL51 initial screen with Route Schedule Nbr(just got created) and system throwing error msg "Route Schedule 753/005/MK already exsists".
I have chked all the steps in my LSMW and they seem to be OK i.e. read data, convert data, etc.
Could anyone pls help me fix this issue? Thnkxin advance.Hi,
I have already changed the source structures viz.Header & Item by adding the 'Identifier' field in them.
Yes, u r right that I did the recording with just 1 line item.This is because, I do not know how many items a
particular Route Schedule would contain.Since that was not working, I repeated the recording with 2 line items, but he problem still persists.
I was checking each and every step of the LSMW and found that in 'Read Data' step system is reading the source
file as it is, i.e. in a hierarchical manner with 1 header and 2 line items as there in the source file. But, after the conversion step, when I am executing 'Display Convert Data', I am seeing two distinct lines as Header->1st line item and
Header->2nd line item.It's not showing in a hierarchical manner.
I wonder if this is the cause, but having no clue how to rectify it.
Plz help..... -
Schedule Line Delivery Date Calculation with Transportation Scheduling
Hi All,
We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
Order Scenario:
'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
Our 'Route' has a Transit Time of 2 days
We create a Sales Order on Monday for a Material that is available in our Plant
The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
All help greatly appreciated.
Thanks,
Ravelle<i></i>Hi Pathik,
Thanks for your reply. I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>.
The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
Thanks,
Ravelle -
Route schedule not updated in some line item of a sales order
Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
AbhilashWhen you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi -
Scheduling in Routing..
Hi all ,
i am facing a problem scheduling in Routing ,
When i am doing scheduling in routing (CA02 ) as :
Menu EXTRA --> Scheduling
here i am entering start Date : 30.09.2008 scheduling type Forward
and lot size then the system is carrying the scheduling , the problem is with Earliest Start Time it is haphazardly(16:10:00) taking rather than that of the start time maintained for the first operation Work center, capacity header , which is there as 07:00:00 .
From whr the sytem is picking / calculating this Earliest start time ?
I haven't maintained interoperation times wait , queue time etc .
Regards
Venky shree
Edited by: venky shree on Feb 13, 2008 6:23 AM
Edited by: venky shree on Feb 13, 2008 6:33 AM
Edited by: venky shree on Feb 13, 2008 6:45 AMRes sir ,
yes , i have assigned shift schedule for the work center :
S1 SHIFT 1 01.01.2007 31.12.9999 07:00:00 15:00:00 7.00 BRK1
S2 SHIFT 2 01.01.2007 31.12.9999 15:00:00 23:00:00 8.00
S3 SHIFT 3 01.01.0001 31.12.9999 23:00:00 07:00:00 8.00
and BRK1 is defined like :
BRK1 0 Lunch Break 6.00 1.00
in OP4A .
is it affected by the same .???
Regards -
Route Schedule in Third Party Orders
We have made the necessary setting for the determination of Route and Route Schedule, but unfortunately the route schedule is not getting picked in the Third party order, but it works wonderfully with outbound delivery orders...
Is there any other setting to trigger the RS for 3rd party orders? or is it that SAP doesnt support RS for 3rd party orders as there is no actual delivery happening?
Regards
RajDear Babu,
As, in Third-Party Orders, theres is no Material-Movement (shipping) from Plant; Route Schedule will not be applicable. Customer places an order on to you and you have placed an order to your vendor, who will directly deliver the goods to your customer.
Best Regards,
Amit.
Note: A very informative thread, on to Route-Schedule:
[Route Schedule|Route schedule] -
MRP Scheduling with a material with multiple production versions scrap rate
Greetings all.
I have a problem with MRP scheduling. How do you account for different loss rates or scrap rates on a material because of multiple versions of a material that are in production. For example, we have an item. There are two differen ways to make that item and both have different loss rates or scrap rates. How do we account for this. And whatt happens when you have these with multiple routings. Thanks.Dear,
It can be handled in 3 ways.
1st way - Create 2 versions to represent 2 ways of production. Create a 3rd version name it as total and make it as a first version so that MRP will take this version for scheduling. In total version give the most correct scrap qty and timming in routing. Hence when you run MRP system will consider the total version, then change the varsion in planned order as per your requirement.
Second way - Create 2 version and if you are using Demand planning, in MD61 against the qty represent the version number so that when youn run MRP, the planned order will carry the version.
3rd way - Create 2 Production version and create a quota arrangement and assihgn these two Production version as Quota items and give the % share. Hence when youn run MRP system will share the demand qty into two different version as per Quiota arrangement(setting in MRP2 is necessary fir planning).
Please come back which one you are looking for so that we can give furthur information -
Route schedule and Route Combination
Hi Experts ,
I have a Sales Order . Now Under schedule Line Tab I see two schedule Lines ,one line with confirmed quantity now, each schedule Line with different route schedule .
I would Like to Know , how the system understands when and which route schedule to take , when more than 1 route schedule is present for a Route .
How the system Picks up the correct route schedule when 2 or more route schedule is there for A route.
Thanks
MM_sDHi Sayantan,
Actually I want to understand how a Route picks up different Route schedule .
Below is the schedule Line . Now for the 1st date I see route schedule as SSGPT321TU
For the 2nd Date in schedule Line I see different Route Schedule as SSGPT321MO.
Now how the Route SGSGPT decides which schedule to take for which date , how does this works
Thanks
MM_sD -
Finds the correct route schedule
Master data : Route scheduling transaction VL51 and VL52
The customer is linked to 2 route schedules with different goods issue dates :
Every monday at 10 AM
Every thursday at 3 PM
In the sales order, when you enter a first delivery date, R/3 finds the correct route schedule and calculates precisely the goods issue date according to the customer delivery date.
If you change the delivery date in the sales order item (option: edit/fast change of /delivery date), R/3 does not determine a new route schedule and stays with the first one.In my personal opinion, you can have any certifications you want but if you can't/don't pass the "practical exam" that we've set up as part of a candidate's interview process then you're out.
In my present job, I've seen so many candidates applying for jobs with CCNA, CCNP and CCIE "certification". The very minute we informed them that part of the interview process is a "practical exam" involving configuration of some routers and switches ... these so-called "certified" candidates back out. -
Hi
I have created routing and i have maintained 22 Hours planned time for workcenter X. Operating hours for workcenter X are 21 Hrs daily.
When i do backward scheduling with finish date 8 october 2009 time 24:00 Hrs then system calculates start date as 06.10.2009 and time 22:51:26 . But as per planned hours 22 it should start at 06.10.2009 and time 23:00:00.
Why it is starting at 22:51:26 . There is not queue time , wait time, move time.
Also i have maintained operation scrap as 10 % but in scheduling results iam getting 11.11 % instead of 10%Dear Mayuresh,
Just check the below link which may help you
[routing;
Regards
kumar -
Schedule generating site map with KM Scheduler
Hi everyone, as it takes a long time for a user to generate a site map and then get it displayed on the client side. From SDN I found all the solutions for site map are implemented in DynPage class.
I know executing DynPage is iView or browser window dependent. So it seems impossible to schedule this kind of portal component application with KM Scheduler.
I do hope there is a trick to do this. If there is no is any solution by now to execute like DynPage class with KM Scheduler ?
Kind regards.
WangHi,
generally you can create a service which will implement ISchedulerTask (in NWDS create portal application object -> RF Component Wizard -> Scheduler Task Wizard). This service will be accesible in KM configuration so you can schedule it as you wish. This service will "cache" the data for your sitemap iview.
Alternatively you can create a "standard" service, which will fetch the data in periodic intervals. In run method of the service you use something like this:
while (true) {
try {
Thread.sleep(WAITINTERVALINMILISECONDS);
} catch (Exception ex) {
// now call the method for fetching
// the data for your sitemap...
Hope this helps a bit,
Romano
Maybe you are looking for
-
SAP Webdispatcher Setup for J2EE 640
Dear Basis Guru's, I am trying to setup SAP Webdispatcher for our customer system. J2EE Instance is installed in a hostname called javadev which is in a domain where all other SAP Instnaces are setup ( XYZ.COM). I have installed SAP Webdispatcher in
-
Why are the terms for adobe flash player appear to be written in arabic?
Why are the terms for adobe flash player appear to be written in arabic?
-
i want to convert the Component (Such asJTable, JLabel, JTextArea...) into Graphics or Image and print out in Mulit-page with PrintPreview. My Problem is : 1. How to Convert From Component into Graphics / Image 2. Code for print(Graphics g........).
-
I trying to trace scanned line drawings so that I get only one path per line going up the middle of the line and not a path along each edge of the pencil or ink line and a fill between. What I hope to do is convert each line in the artwork to a singl
-
Quick question about System Change Number(SCN) in FlashBack Query topic
i know tht we can get the SCN of the database using flashback concept as follows SQL> execute :myvariable:=dbms_flashback.get_system_change_number(); PL/SQL procedure successfully completed. SQL> print myvariable; MYVARIABLE 451578 for example i made