Schedulling agreement release output issue/.........

Hi All,
This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
Can anybody help in resolving this issue?
Thanks in advance.

>
aakansha kumar wrote:
> Hi All,
>
> This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
>
> Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
>
> Can anybody help in resolving this issue?
>
> Thanks in advance.
Check if your output type is present in the output type determination in the following path:
Materials Management -> Purchasing -> Messages -> Output Control -> Message Determination Schemas ->  Define Message Schema for Scheduling Agreement Release/Expediter
Also check the analysis tab while you check the SA release, it will give you clearer idea about the problem.
Regards,
Aroop

Similar Messages

  • Scheduling Agreement Release Strategy Issue

    Hi,
    We have a typical problem in Scheduling Agreement Release Strategy.
    Once the SA is released for the first time it should restart the release strategy again if there is a change in Quantity or Value or Purchasing group. The release strategy is getting restart for some of the release strategies and not for others. I compared the characteristics, class for both the release strategies and I am not seeing any difference.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards
    Ram

    release strategy can be rerigger in case where qty or price change and the changes is over the percentage you defined for Release indicator
    goto release indicator config and in SPRO for release strategy and check the Value change %
    maintian 0.1 here
    so any change above 0.1 will retrigger
    and maintian value 4 in chgable field.

  • Scheduling Agreement Release Comparison

    Hi Experts
    does Scheduling agreement release comparison works for JIT delivery schedule (Doc Type LP) in SNC?
    if yes then how it works and how it is different than forecast delivery schedule release comparison (Doc Type LPA)
    Thanks

    Hi Indira,
           The are two ways to address your business case :
    1. The simple way is to forward the work item to the concerned person (by selecting the user from user list) for releasing the work item.
    2. In the second option, we need to modify the workflow. A conditional work item (Accept/Reject) needs to be inserted immdtly after the SA workitem to accept or reject the user decision. Based on the decision, the workitem will either show him the SAP user list to redirect the same for releasing or it should go to the concerned user automatically (in static agent assignment). In case of acceptance, it will go to next step bypassing the rejection loop.
    In case of any further queries, please revert.
    Regards,
    Ashish J. K.

  • Delete/Stop Scheduling Agreement Release (Purchasing)

    Hi,
    I have a question concerning releases of a purchasing scheduling agreement in SAP APO. Basically very simple - how can I delete them or at least stop them? I did not find any transaction or report to do so (only for SD scheduling agreement releases). I know that there is a functionality of "dynamic stopping" of release done by the system but how can I do it manually? If there is no such function (which I could not really believe) what would be the business scenario to stop such a release (releases are created by APO, but I manually want to delete them). There has to be such functionality...
    Many thanks in advance
    Christian

    Hi Christian,
    Pl check this document..
    if it helps that would be great for me..
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/22/ec9d3b0ec10670e10000000a114084/frameset.htm
    Thanks,
    Bala.

  • Schedule Agreement release report

    All,
    Is there any report to have the Schedule agreement releases to be generated online or in background?
    Kindly advice.
    Thanks

    Hi,
    Pls go to ME3N, choose dynamic selection on the top
    Release group
    Release Strategy
    Release indicator
    Release status
    Subject to release
    and execute, you get the report accordingly.
    Reward points
    Thx
    Raju

  • Print scheduling agreement release with zero demand

    Hello all,
    we have a print problem with purchasing scheduling agreements:
    when I go to ME38 to the scheduling agreement release docu and print out the latest release which has a zero amount for scheduled quantity, I'll get the error message
    no print relevant changes to document xxxx exist.
    ME140
    I know there are already some threads about this topic in the forums but I was not able to find a helpful answer yet.
    Thanks
    Anne

    hi
    please check the message which are already available status is "Green". if its green you have to create another message and you have to print it again..

  • How ro delete/cancel procurement Scheduling Agreement Release in APO system

    Hi,
    Can you please tell me the ways to delete procurement schedule agreement release in APO system.
    I have gone through the thread "How to delete the old schedule line release? and found two transactions but it seems both the transactions like /sapapo/cmds_del  & sappao/cmds_sc02 are used for sales scheduling agreement release deletion.
    The system is not allowing me to delete the same in APO system as these are APO scheduling agreements.
    Please help me on the same.Thanks in advance.Revert back if any further clarification is required.
    regards,
    kaushik

    Hi,
    Thanks for your reply again.
    The /SAPAPO/DELETE_PP_ORDER program does not select the release schedule lines though it selects the Scheduling Agreement Schedule Line (Not released) for deletion.
    The transaction /SAPAPO/PWBSRC2 for Deleting External Procurement Relationship but as long as the released schedule line exists , it is not possible to delete the scheduling agreements.
    I have gone through the help.sap.com site and I was not able to found anything about deletion or cancel/closing of Scheduling Agreement Release.
    Still waiting for the solution.
    regards,
    kaushik

  • Deactivate Scheduling Agreement Release Profile

    Hi,
    We have configured scheduling agreement release profile for JIT and forecast delivery schedules.
    For some reasons we do not want to use the release profile, we do not wont schedule line release using ME84.
    Can any one pls suggest how to deactivate the release and also if any other settings has to be unchecked.
    Pls do the needful.
    Regards,
    Neha

    Hi Prashanth,
    Changing the setting from 2 to 1 in source list will not be relevant as schedule lines has to be generated while MRP run.
    I understand that if the material is checked for JIT in material master and when the Doc type is LPA then the scheduling agreement automatimatically goes for release. Correct me if I am wrong.
    Should the config setting for creation profile to be deleted from SPRO settings.
    Pls lemme know.
    Regards,
    Neha

  • Schedule agreement releases

    How I will come to know the Schedule Agreement is released or not in ME84? LPA is agreement type.
    ME84 I have executed and next screen green light is coming.
    But while going to ME33L and seeing Release number ,its 0.
    Please explain how I can do this?
    Thanks

    Hi PS,
    You need to output the last relase. Once you process it's output successfully, it would be considered. Otherwise not.
    Any release which is not transmitted, is not considered as valid for use in SA.
    Sanjeev
    Edited by: Sanjeev Shrivastava on Mar 24, 2008 6:50 AM

  • Scheduling Agreement Release

    Hi All
    Scheduling agreement is created & released. Release indicator is 6, after the release again some line items are blocked & some line items are deleted without affecting any characteristic of release strategy
    ( No Change in value , Document type , Purchase group on which release strategy is based)
    Wheteher release strategy will be reset in this condition form release to unrelease
    Please suggest
    Thanks in advance
    Regards
    Rajesh

    Hi,
    If no user exit is activated in support for your release strategy, then any change which results in no revision of your original value will not cause any release strategy reset.
    Cheers,
    HT

  • Schedule Agreement Message Output Determination

    Hi Vishal
    Can you give me some more details for Configuring the Schedule Agreement Output Determination in the same manner for which you have given for a PO.
    My scenerio:
    Making a contract with a Vendor --> Maintain Source list --> Giving MRP indicator as 2 in the source list for that delivery --> Running MRP for that material --> Checking the Schedule lines are generated in the Stock/Req list --> Now the schedule lines should send message output to the vendor via EDI/Print.
    So give the answer relevant to above situation.
    points already awarded to the previous question.
    Thanks Vishal
    Regards
    Maruthi Ram

    Hi,
    PO Output Determination
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    GR Output Determination
    Instead of Purchase order use Scheduling agreement
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
    G.Ganesh Kumar

  • Scheduling agreement release in APO

    Hey Gurus,
    We are planning and releasing scheduling agreements in APO through the product view.  The problem that we are having is that we can't see these released schedule lines in MD04 after the schedule lines are released in APO.  Is there somethign with the CIF that needs to be set up for this?  We already have integration models set up for PIR's and SchAgreements already.
    Also, we checked the /SAPAPO/CCR reconciliation report and didn't see anythign stuck in there   Do you guys have any suggestions for us?
    Sincerely,
    Kris

    Hi Kris,
    Please check the the distribution definition has been maintained for each location
    SPRO:
    Integration with SAP Components
    Integration via APO Core Interface (CIF)
    Basic Settings for Creating the System Landscape
    Basic Settings for Data Transfer
    Publication
    Maintain Distribution Definition
    Publication type: "confirmaiton for scheduling agreement"
    Regards
    Julien

  • Scheduling agreement releases in ME84

    Hi All,
    I have create a scheduling agreement and maintained the same in a source list. The after I executed MRP (MD02) schedule line were created for the scheduling agreement from the MRP run.
    But now when I go to Txn ME84 and try to create releases I do not get the scheduling agreement I created here. I have maintained the condition record for conditions LPH2 and LPJ2 in NACR. But still I get error as "No data for chosen selection" for my SA.
    What am I missing here?
    Regards,
    V S

    I checked further and found that the SA was not released. so released it in ME35.
    But now again I get an error that "No schedule lines exist"
    I get this error if the scedule lines have been created by MRP, buit if scedule lines are created manually in ME38 in ME84 schedule lines are released properly.
    Any clues why it is so?

  • Scheduling agreement release response

    Hi Experts,
    In SRM 5.0 there is no response regarding scheduling agreement (SA), only Purchase Orders have response (POR).
    Do you know if in SRM 6.0 there is response for SA??
    Thanks and regards
    Juliana

    Hi Indira,
           The are two ways to address your business case :
    1. The simple way is to forward the work item to the concerned person (by selecting the user from user list) for releasing the work item.
    2. In the second option, we need to modify the workflow. A conditional work item (Accept/Reject) needs to be inserted immdtly after the SA workitem to accept or reject the user decision. Based on the decision, the workitem will either show him the SAP user list to redirect the same for releasing or it should go to the concerned user automatically (in static agent assignment). In case of acceptance, it will go to next step bypassing the rejection loop.
    In case of any further queries, please revert.
    Regards,
    Ashish J. K.

  • Schedule Agreement release to SUS

    Hello Experts,
    We are implementing MM-SUS. I am new to SUS. Please let me know step by step configuration required to send Schedule lines created (ME38) for Schedule agreement (ME31L) to send to SUS.
    I have run the transaction ME84. But it returns with Error code 26. No data for given selection.
    Thanks in advacne.
    Aakash.

    HI Ravi,
    I didnt get you.
    What to check in XI and what status  you want to know of ECC.
    We have ECC 6.0. All mappings done in XI.
    my problme is when i run transaction ME84, it is not creating any Idoc for DELINS.
    Can you tell me how to get it done?

Maybe you are looking for