Schema extension

I am trying to install Server Management and Monitoring Services on a test
network.
On the first screen, I have chosen extend schema.
Then when I go to install Management and Monitoring Services, it checks
the schema and returns this error. The selected tree does not have the
required schema extension. Error Code 1.
What am I missing? How do I correct it?
Thanks for your help!

> Have a look at TID 10084926, think this will still apply to the current
> install
>
> Ron
>
> <[email protected]> wrote in message
> news:e_Jaf.904$[email protected]..
> >I am trying to install Server Management and Monitoring Services on a
test
> > network.
> >
> > On the first screen, I have chosen extend schema.
> >
> > Then when I go to install Management and Monitoring Services, it checks
> > the schema and returns this error. The selected tree does not have the
> > required schema extension. Error Code 1.
> >
> > What am I missing? How do I correct it?
> >
> > Thanks for your help!
>
>
Running the install with the NO_SCHEMA_CHECK allowed me to install server
management.
I am still curious why it does't recognize the extended schema. What
ramifications does that have down the road?

Similar Messages

  • Active Directory schema extensions

    Hi
    We are in a process of implementing SAP LDAP sync to manage users from MS Active Directory. SAP requires schema extension generated by RSLDAPSCHEMAEXT program to be applied to Active Directory so that report RSLDAPSYNC_USER can be identify SAP users in MS AD.
    The MS AD team says that any non miscrosoft schema extensions are not supported as OIDs of the schema might conflict with other applications / patches.
    Are the MS AD schema extensions generated by SAP program RSLDAPSCHEMAEXT supported / certified by Microsoft.
    Harsh

    Hi Harsh,
    I would like to point you also to SAP Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
    It especially states that:
    ..."The text document generated by RSLDAPSCHEMAEXT was supplied and validate as part of a certification process by the directory vendor."...
    that means in this case by Microsoft.
    If you decide not to use the schema extension that has been supplied by Microsoft you can use attributes that are already existing in your Active Directory as Juergen already pointed out.
    As an example Microsoft Exchange Server creates several additional attributes such as extensionattribute1, ... , extensionattribute15 as part of the installation process. These attributes might be an option for you if you do not want to use the schema extension suggested by RSLDAPSCHEMAEXT.
    Please have in mind that the filter attribute that you will use to determine the SAP username should be indexed since this will reduce the synchronization time.
    Best Regards,
    André

  • AD Schema Extension Updates?

    Hi,
    I was wondering whether anyone had any idea if Apple have any plans to update the AD schema extensions to support Apple Computer Groups rather than just Computer Lists? Lists are pretty old and the extra flexibility that comes with Computer Groups would be welcomed.
    Thanks in advance.
    Bobby

    As I understand it, the main roadblock is that the Active Directory connector (essentially a directory service plug-in that translates AD-speak to Apple's internal format) doesn't computer groups, just computer lists. This could be added in future versions of the AD connector (I have no idea if there are any plans for this), but even then if you built computer groups in AD, they'd only work with Mac clients that had the newer version of the connector...
    BTW, I've never seen much difference between computer groups vs. lists (probably because I don't use either one very much). What extra flexibility are you wishing for?

  • Ldap schema extension to control which users / group are imported

    Hello,
    would like to have your opinion:
    would it be a good idea to implement ldap schema extensions to control
    which users / group are imported and controlled from ldap in a ldap
    mastered installation?
    e.g. we could implement the following schema extension for users:
    attributetype ( 1.3.6.1.4.1.<iana-org-id>.1.1 NAME ( 'BogusisBeehiveUser' )
         DESC ''
    EQUALITY booleanMatch
    SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
    SINGLE-VALUE )
    # BogusinetOrgPerson
    # The BogusinetOrgPerson is derived from inetOrgPerson
    objectclass     ( 1.3.6.1.4.1.<iana-org-id>.1
    NAME 'BogusinetOrgPerson'
         DESC 'RFC2798: Internet Organizational Person, plus Bogus Extensions'
    SUP inetOrgPerson
    STRUCTURAL
         MAY (
              BogusisBeehiveUser )
    Then we could control the inclusion in beehive by simply switching
    BogusisBeehiveUser on or off.

    sure; that's pretty much what is talked about in the Install Guide for LDAP Integration under the "inclusion and exclusion" section, about here:
    http://download.oracle.com/docs/cd/E14897_01/bh.100/e14830/ldap.htm#CHDEFFJF
    that doesn't go into the specifics of how you might want to design your objectClass schemas, though, as beehive is agnostic to that.
    If you don't want to provision all users that match a certain existing rule (like everyone under dn=foo, or everyone where userType=employee), then adding a new attribute and building the profile inclusion rule around it is a valid thing to do.
    richard

  • OAM - AD schema extensions cleanup

    I'm uninstalling an OAM install that is using Active Directory on Windows 2003. Reading the OAM documentation it doesn't seem to be any cleanup scripts for AD. I have removed the oblix configuration but what is the easiest way to cleanup the OAM schema extensions from AD?

    You're finding yourself up against on of AD's technical constraints here: once the schema goes in, it cannot be removed.
    You could go through the ob schema and disable the various objectclasses and attributes (could probably write some ldif to do that) but, as far as I know, that's the best you can do.
    Perhaps take the question to an AD forum and ask about sneaky ways to clean up schema?
    Mark

  • Active Directory Schema Extension for Directory Synchronization - ADFS 3.0, Office 365

    Hi Team,
    We are in a situation with extending the schema for one customer so that these additional exchange attributes may be utilized. They have a single data center where the Primary Domain Controller resides and have multiple remote sites each of which have Additional
    Domain Controllers installed.
    As recommended by Microsoft, I am going to extend the Active Directory Schema with Exchange Setup so that I can leverage targetaddress attribute from Local AD to set primary email address when directory synchronization happens.
    My Query: Do I have to extend the AD Schema with Exchange from each of these ADC's? Or the changes I make on any of them will replicate over the others also?
    Note: The customer will be using ADFS 3.0 'Single Sign On' with Office 365 and does NOT have any On-Premise Exchange deployment.

    My Query: Do I have to extend the AD Schema with Exchange from each of these
    ADC's? Or the changes I make on any of them will replicate over the others also?
    Schema extension is done against the Schema Master. Once done, it gets replicated to other DCs with the AD forest.
    For more details about Schema Extension by Exchange, you can refer to that: http://www.resdevops.com/2013/02/13/extend-ad-schema-to-allow-greater-office-365-management/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • SCCM 2012 AD schema extension

    Hi all,
    we were in the process of installing SCCM 2012 R2 in our lab, we have extended the schema & schema extension creates classes & attributes we just wanted to know where we can find these Classes & attributes in AD. where we can see it being created
    in AD.
    We have seen the successful schema extension in the log files but we also wanted to get the details from AD side.
    Please suggest.
    Thanks,
    Pranay.

    This has all the details
    But in summary:
    Attributes and Classes Added by the Configuration Manager Schema Extensions
    When you extend the Active Directory schema for ConfigMgr 2012, the following attributes and classes are added to Active Directory Domain Services:
    Attributes:
    cn=mS-SMS-Assignment-Site-Code
    cn=mS-SMS-Capabilities
    cn=MS-SMS-Default-MP
    cn=mS-SMS-Device-Management-Point
    cn=mS-SMS-Health-State
    cn=MS-SMS-MP-Address
    cn=MS-SMS-MP-Name
    cn=MS-SMS-Ranged-IP-High
    cn=MS-SMS-Ranged-IP-Low
    cn=MS-SMS-Roaming-Boundaries
    cn=MS-SMS-Site-Boundaries
    cn=MS-SMS-Site-Code
    cn=mS-SMS-Source-Forest
    cn=mS-SMS-Version
    Classes:
    cn=MS-SMS-Management-Point
    cn=MS-SMS-Roaming-Boundary-Range
    cn=MS-SMS-Server-Locator-Point
    cn=MS-SMS-Site
    The Active Directory schema extensions might include attributes and classes that are carried forward from previous versions of the product but not used by ConfigMgr 2012. For example:
    o Attribute: cn=MS-SMS-Site-Boundaries
    o Class: cn=MS-SMS-Server-Locator-Point

  • EDirectory Schema extensions best practices / Mac OS X 10.5

    Hello all,
    I am integrating Mac OS X clients into my eDirectory environment, and part of my process is to extend the eDirectory schema with the relevant Mac-specific attributes. Is there an easy method to extending the schema, or do I need to manually add each individual attribute that is not already stored in an importable ldif file? Also, are there any best practices to follow when performing this work?
    Thanks for the help!

    Are these the extensions published by Apple? If so I think they have
    fairly good documentation on their site where you got them from. If not,
    well, we're going to need to know where you did get them from and what
    they are actually doing.
    And again, we need to move this to the novell.support.native-file-access
    forum, where it belongs. Schema extensions are nothing to do with
    netware.communications. Thanks
    Andrew C Taubman
    Novell Support Forums Volunteer SysOp
    http://forums.novell.com/
    (Sorry, support is not provided via e-mail)
    Opinions expressed above are not
    necessarily those of Novell Inc.

  • Schema extension with unique value

    I would like to know if it's possible to perform a schema extension to add a new field to active directory and then require that the value entered into the new field be unique between all users.
    For example say I want to track computer to user assignment by adding a field to record the computers serial number. I want to make sure that the same computer is not assigned to 2 people so when I enter the serial number I would like AD to make sure it's
    a unique value between all other users.
    If this is possible any links to documentation on how it would be done would be much appreciated.
    Thanks for the help

    Hello,
    why not using the already existing attributes that are empty on the account proeprties?
    Be aware that changing the schema can result in loss of the domain if done wrong. If you still like to change the schema built a lab BEFORE doing this on production and test everything in detail in the domain to be sure not problems occur.
    Additional keep in mind that own schema changes may result in problems when updating the schema with new versions from Microsoft.
    http://technet.microsoft.com/en-us/library/cc961737.aspx
    http://technet.microsoft.com/en-us/library/bb727064.aspx
    http://technet.microsoft.com/en-us/magazine/2008.05.schema.aspx
    http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/f899e538-c197-497c-beb3-c9968c681867/
    http://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • Schema extension problem

    Hi,
    I have installed a new domain with NSM. The 'NSM Schema Utility' is showing:
    Screenshot.png
    But in the NSM Admin I have the message: "Schema Not Extended"
    Can I verify with for ex. the mmc 'Active Directory Schema' if the all required extensions are done? Or is it only a problem with the NSMA which doesn't detect correctly the extension?
    Best regards,
    Christian

    Christian,
    What's the domain and forest functional level in this domain?
    -- NFMS Support Team
    On 3/7/2014 5:36 AM, goebelch wrote:
    >
    > Hi,
    > I have installed a new domain with NSM. The 'NSM Schema Utility' is
    > showing:
    >
    > 5042
    >
    > But in the NSM Admin I have the message: "Schema Not Extended"
    >
    > Can I verify with for ex. the mmc 'Active Directory Schema' if the all
    > required extensions are done? Or is it only a problem with the NSMA
    > which doesn't detect correctly the extension?
    >
    > Best regards,
    >
    > Christian
    >
    >
    > +----------------------------------------------------------------------+
    > |Filename: Screenshot.png |
    > |Download: https://forums.novell.com/attachment...achmentid=5042 |
    > +----------------------------------------------------------------------+
    >

  • Schema extension [extend] and ldap v3 conformance [proprietary]

    Hi,
    am I still conform to ldap v3 spec when I extend the schema with my own attributes and object classes (with the iplanet console 5.1)?
    So, does ldap v3 only define the object classes and attributes or an extension mechanism too?
    Regards
    Kristian

    The first example was almost correct !
    The error message: "javax.naming.NameNotFoundException: [LDAP: error code 32 - 0000208D: NameErr: DSID-031001C6, problem 2001 (NO_OBJECT), data 0, best match of: 'CN=Schema,CN=Configuration,DC=ric,DC=com'; " simply indicates a naming error.
    If you follow the logic of your code, you are trying to create an attribute with the distinguished name:[code]CN=fooattr,CN=Schema,CN=Configuration,DC=ric,DC=com,CN=Schema,CN=Configuration,DC=ric,DC=comIf you are wondering why, it is because you are attempting to create the subcontext from the schema naming context.schema.createSubcontext("CN=fooattr," + dn,attr);You can correct this by changing your code toschema.createSubcontext("CN=fooattr",attr); or toctx.createSubcontext("CN=fooattr," + dn,attr);One other error, you are missing one of the mandatory attributes; namely oMSyntax.attrs.put("oMSyntax","2");You can find details on the Active Directory Schema at http://technet2.microsoft.com/WindowsServer/en/library/97cae647-d996-48ff-b478-c96193abeadb1033.mspx
    A simple way of checking the mandatory attributes for any object class is to look at the values of the systemMustContain attribute of the objectClass definition. In the case of attributeSchema, the systemMustContain attribute includes: schemaIDGUID (automagically generated), oMSyntax, ldapDisplayName, isSingleValued, cn, attributeSyntax and attributeID
    Another reference that is helpful is a table of Attribute Syntax definitions at http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/distrib/dsbe_ext_dghb.mspx
    The only words of advice for extending the schema are:
    1. Test, Test, Test, before deploying in production
    2. Do not ever reuse attributeID's or make up your own! If you are extending the schema get your own OID from an appropriate standards authority, or they may be obtained from Microsoft. Refer to http://msdn2.microsoft.com/en-us/library/ms677621.aspx or http://msdn2.microsoft.com/en-us/library/ms677620.aspx

  • ADS schema extension- How to maintain SAPUsername in the ADS?

    We want to extent the schema from an ADS by the object: SAPUsername. After the extension we cant maintain the field by help of the ADS because the field does not exist. Does anybody knows if Microsoft delivers a tool for this problem (some libraries)?
    Thanks a lot, Patrick.

    The ads should not be shown immediately after you added the Skype credit t your account and changed conversation windows. Did the ads persists even after  you restarted Skype?
    UPDATE: Just saw that you alreayd stated that the ads persisted even after restart. You shouldn't see ads after adding Skype credits.
    Are you sure you used the same Skype account that you purchase the credit for in the Skype application?
    Do you recall that you saw the Skype credits shown in your Skype user interface? 
    If you indeed used the same account you purchase Skype credit for it would be a very bad bug For me this doesn't reproduce though: My account with credits doesn't shown ads in Skype.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • AD schema extension for ESSO

    Friends,
    Because it is necessary to extend the schema in Active Directory when you install the Logon Manager ESSO.
    Thanks.

    As I understand it, the main roadblock is that the Active Directory connector (essentially a directory service plug-in that translates AD-speak to Apple's internal format) doesn't computer groups, just computer lists. This could be added in future versions of the AD connector (I have no idea if there are any plans for this), but even then if you built computer groups in AD, they'd only work with Mac clients that had the newer version of the connector...
    BTW, I've never seen much difference between computer groups vs. lists (probably because I don't use either one very much). What extra flexibility are you wishing for?

  • Schema extension required in DMZ domain for IBCM?

    Do I need to extend the schema in my DMZ for IBCM?  I'll be managing DMZ servers, as well as laptops that move between the internal environment and the Internet.  The DMZ will only have an MP,DP and SUP.

    As a side note, you *never* have to actual extend the schema or publish ConfigMgr info to AD. Doing so helps clients find info about the site. This of course would make no sense for IBCM though because the clients can't even get to your AD instance thus
    this really becomes moot.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Manual schema extension of OID

    Hi,
    I want to extend the schema of Oracle internet directory manually, could any one help me how can i extend the schema of oid manually ? (either using ldif or dsml file)
    Please provide the sample syntax of ldif or dsml for the same.

    Check this link
    Regards

Maybe you are looking for