Schema Group for Local & Import for RFQ, Contract, PO

Hi,
I would like to create two schema for Local & Import for RFQ, Contact and PO.
I have customized the schema as per my own requirement, it is working fine in PO RFQ but in Contract the same Schema is not appearing when i am trying to maintained header condition.
In short i would like to have my own schema for Import & Local same for RFQ, Contract & PO.
Regards

Check this link:
Assigning Calculation Schema to Contract
servicing calculation schema and populating them while creating contract
Check this answer:
Go to M/06 and here in the Base Price Condition Type (for e.g. PB00) assign the Z - Pricing Procedure under "Master Data" Subscreen which you want to use. And then try to create a new Contract or change the old contract.
Edited by: Afshad Irani on Jul 30, 2010 5:29 PM
Edited by: Afshad Irani on Jul 30, 2010 5:30 PM

Similar Messages

DVcam as converter box for analogue import for imovie hd 5.0.2 SUCCESS

DV camcorder as converter box for analogue import for imovie hd 5.0.2 SUCCESS
Try hooking everything up and hitting record on the camera, suddenly imovie import works and imovie does not try to play the tape in the camera, simply importing to your hearts content.
I was trying analogue through a Sony DCR-PC1000E. You can't record with the regular rec/pause switch but with the onscreen menu.
My problem was Imovie would only display a blue screen with "camera attached", imovie could see and hear the signal during import but would quit after 7 seconds and 24 frame every time.
I believe this was due to the camera not sending control track or timecode, thus imovie times out, more of a preset then a fault.
pb g4 Mac OS X (10.4.2)

Hi conrad - great that it's working for you! It's probably worth walking people through your set-up and step-by-step process, just to clarify what you did (especially the bit after you have connected your camera to iMovie). A lot of people will be interested.

Same vendor for local & import purchasings

Hi,
is it possible to use the same vendor as a local & import vendor ?
is it possible to classify the same vendor with calssification settings ?
any possible way to do this activity, plesae advice,
rgds

is it possible to use the same vendor as a local & import vendor ?
You can , for statistical purpose. However if you are thinking to pick the different Pricing procedure through Vendor Schema.
It is not possible.
In standard
You can do the same vendor name with two different code ( Different Vendor Account Group which will classify the series e.g 3000 ... series for Import, 200... series for domestic. ) and different schema

Custom directories for export/import for Integration Builder

Hi,
XI uses default directories for exporting and importing Integration Builder objects, and there is no option to change the directory or to pick up objects from another directory.
Does anybody know of any way we can change the default directory that XI uses? Maybe some system setting hidden somewhere deep?
Thanks and Regards
Manish

Hi Manish,
when there's no way there's always an <b>XI way</b>:)
you can help your basis team using XI
set you file adapter to monitor export directory
and try sending your xi export files to a different server/location
you can have a look how Felix did similar scenario:
/people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
isn't this a good way ?
Regards,
michal

Required setting for Locale values for Arabic db in oracle 10g

I want to create a new db in Oracle 10g for storing the arabic data.
My client machine is Arabic Windows XP.
What are the steps that i will need to follow to make the db arabic supported.
What streps will be required if i choose to make it unicode supported?
Setting the following:-
1. Set Database Character Set to AL32UTF8 for the Oracle Server.
2. Set the NLS_LANG to ARABIC_LIBYA.UTF8 (on Arabic Windows xp)
Will do the work?

The database character set should be AL32UTF8 for Unicode support. This is a recommended setting.
As far as NLS_LANG is concerned, this strongly depends on how your client application is written (what technology, which Oracle access API). For example, for SQL*Plus, the NLS_LANG must be set to AR8MSWIN1256, as SQL*Plus does not support Unicode on Windows, only the ANSI code page. For SQL Developer, the NLS_LANG does not matter at all.
-- Sergiusz

Re: imported material for local vendor.

Hi guru's,
Our requirement is to get imported material for local vendor, for this excise postings should not be allowed (posted) when requirement is raised to local vendor.
what are the settings to be done for no excise capture.
replies awaiting.
tuljasingh.

HI,
First way: - Don't take excise able tax code in purchase order.
Second way:- Maintain vendor excise detail >> maintain tax indicator as 3 in J1ID.
Regards,
Mahesh Wagh

Different schema group for one vendor

Dear all,
We come across scenario,Where a vendor import material for us and at same time
he also acts as a dealer.Here it requires two schema groups for a vendor.
One possible solution is two different vendor codes for same vendor.
Here i come across this answered link
Vendor Schema group
How to do it through partner functions ?
or
Any other solution for it ?
Thanks
Jeyakanthan

Hi
You can achieve this requirement by using vendor subrange. You can have morethen one subranges for same vendor. It will allow you to have more than one set of purchasing data in vendor master which includes schema group and terms of payment....etc.. You need to create vendor subranges from purchasing view in extra and in additional purchasing view.
The below link wil help u to understand the Vendor subrange:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/e2/f3333956bd9f05e10000000a11402f/content.htm

How to Export Non-Administrators Local GPO for import on a different PC

How to export Non-Administrators Local Group Policy and import on another PC?
All articles for exporting local GPO say to copy the C:\Windows\System32\GroupPolicy and C:\Windows\System32\GroupPolicyUsers folder to another PC however that only works for changes done to the "Local Computer" or "User" (if you
alter the SIDs to match), respectively. It doesn't work to import Non-Admin Local GPO.
There are several requests for this you can find when searching and no solutions provided.

Hi,
For manage local GPO, we could take use of the LocalGPO tool included in the SCM.
LocalGPO allows you to manage the local group policy objects (LGPO) on non-domain joined computers. You can use LocalGPO to backup the LGPO from a stand-alone machine. You can also use it to apply the settings from a GPO backup to other computers, this includes
GPO backups created by LocalGPO, SCM, or the Active Directory Domain Services GPO backups created with the Group Policy Management Console.
Here is a good article talking about it:
SCM v2 Beta: LocalGPO Rocks!
And here is a thread for reference:
Using LocalGPO.wsf for standalone PC's
Best regards
Michael Shao
TechNet Community Support

Excise duty in the Pricing Procedure for Local Purchase / Importation

Hi,
I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
Local purchase: the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us.. My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
Importation: the vendor only bills us the cost of the material. When we received the fuel, we paid ED tax to local tax authorities.
I know that both in these scenarios, the system has to determine the excise duty.
My questions are (1) how do you set up the excise duty condition type in the pricing procedure(or do they have to be maintained in the pricing procedure?) ? and (2) how do you set up this condition type in the config?
Thank you and hoping for your immediate feedback.
zccr

Hi,
You can use same pricing procedure
put 4 in subtotal in pricing procedure against the Discounr or freight cond
and in taxinn
BASb ALTCBV 362 and for jmop 363
But this will work only if same discount or freight value is in IV as that given in PO
if freing value changes in IV then its a problem
This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
other solution
in taxinn create tax code like v8 vat 4% for 003 tax clasification
in ftxp create tax code V8 desc vat 4%
in fv11 for jvrd put 4
and at the time of IV put this tax code for freight amount
and for regular material value V1 tax code
this will work only if u have used acess seq MWST instead of JTAX pr JST1
hope this helps
Vipin

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

How to check vendor schema group for info record for third party vendor

Hi Expert,
How to check vendor schema group that assigned in info record for third party vendor?
Thanks

Hi,
Vendor schema group is not assigned in info record, It is assigned in purchasing data view of vendor master ( Check in XK03 )
You can check in Vendor master- XK03- Purchasing data.
hope it will help u.
Deepak

Release strategy for PO, RFQ & Contract

Hi,
We have created release strategy for PO, RFQ & Contract.
Characterisitc is created for Target Value for Header Area (CEKKO-KTWRT)
for RFQ & Contract it working fine but for PO not triggering.
what can be the cause.
Pls guide.

Hi,
Melih is right, for POs you can not use the target value.
What you might do is to include the document type and CEKKO-GNETW as additional characteristics and then set for contract document types the GNETW blank, and for PO documet type the target value blank. Blank means any value should fit.
I hope this hint helps!
Best Regards,
Arminda Jack

Different Aquisition Value (APC) for group and local depreciation area?

Hello,
Is it possible to have different APC/acquisition value in your group and local depreciation area? We want to book the net book value as APC for local depreciation area while gross APC and accumulated depreciation are recorded in group depreciation area.
Group Depreciation Area
APC- 100
Accum Dep- 20
Local Depreciation Area
APC-80
I'd highly appreciate if you can give inputs.

Hi,
You did exactly whats required to acheive your requirement.
There is no more further implications by removing the tick for a while and reverting after go live.
While doing AS91, if you enter the APC value for 01 area, then that value will be automatically populated to the other dependent areas of 01 area. ( In case, if your other areas are in diff currency also, system will converts the 01 area value in to other area's curr by taking the exch rate).
Here you can still change the APC values for the all other areas. (The other areas should have been unticked for Identical APC value check box in OABC).
So while creating AS91, in tkaover values tab, enter APC value 80 in your 01 area and manually change the value in your group area. (REmove 80 and enter 100).
For accum dep, in takeover values tab, enter accum dep 20 in group area only. (like OABC, in OABD also the other areas should be unticked for the identical value check box).
This will resolve your issue.
Thanks,
Srinu

Any applicable\recommended Group Policy settings (Local & Domain) for configuring windows 8.1 "gold master image" for collection

Happy Friday everybody -
I'm working on implementing Microsoft RDS 2012\VDI for the folks here at work. I've read - online - a lot of articles on VDI and RDS 2012 - and have a working model that is working somewhat satisfactorily. I haven't seen much online about steps
I could take in Local Group Policy on my Windows 8.1 'gold image' - or for that matter Domain level group policy - that can assist in creating a better, more reliable/robust Windows 2012 VDI environment.
Anybody out there got any information or opinions or advice on Group Policy settings for VDI environments?
Thanks again, everyone!
Adrian
anr

Hi Adrian,
Thank you for posting in Windows Server Forum.
In regards to your issue you can refer beneath article for detail information.
1. Group Policy Best Practices for VDI Environments
2.Some Basic Group Policy Settings for VDI
Hope it helps!
Thanks.
Dharmesh Solanki

How we create Schema group for every vendor?

If we have multiple vendors/transporters, how you configure pricing procedure for each vendor what is the process of creating Schema group for every vendor?
Thanks in advance
Suresh

hi suresh,
you create Pricing procedure, and then you create Vendor schema group; and purchasing schea group.
for your scenario you will create N number of vendor schema groups.
follow this menu path:
spro --> materials management --> purchasing --> conditions --> define price determination process --> Define schema determination --> define caluculation schema for standard purchase orders -->
in that screen:
you maintain entries in the combination of
purchasing org schema group -- vendor schema group -- pricing procedure.
for your scenario, you maintain N number of vendor schema groups and assign it to procing procedure.
hope this may help you,
Regards
srinivas

Schema Group for Local & Import for RFQ, Contract, PO

Similar Messages

Maybe you are looking for