Schema validation errors with Portal 10.3
I downloaded, installed and configured a domain with an AdminServer and a ManagedServer for WebLogic Portal 10.3. When I start the AdminServer from NodeManager the following errors are reported:
<Sep 24, 2008 12:50:41 PM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@[http://www.bea.com/ns/weblogic/920/domain]>
<Sep 24, 2008 12:50:41 PM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - /opt/Oracle/WL10gR3/user_projects/domains/web/<unknown>:13:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@[http://www.bea.com/ns/wlp/90/security/wsrp]>
When I start the AdminServer using startWebLogic.sh there are no errors. Please advise.
There is a special forum for WLP users:
WebLogic Portal
Similar Messages
-
Schema validation errors in Portal 10.3
I downloaded, installed and configured a domain with an AdminServer and a ManagedServer for WebLogic Portal 10.3. When I start the AdminServer from NodeManager the following errors are reported:
<Sep 24, 2008 12:50:41 PM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://www.bea.com/ns/weblogic/920/domain>
<Sep 24, 2008 12:50:41 PM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - /opt/Oracle/WL10gR3/user_projects/domains/web/<unknown>:13:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>
When I start the AdminServer using startWebLogic.sh there are no errors. Please advise.I have been at this for less than a month, so I may need a little more help. So are you saying that the product as installed has been reorganized and that all of the installed pieces may not reflect all of the changes?
I have continued cutting down my scripts and NodeManager does not seem to be a factor. Starting from WLST does not work.
This works:
/opt/Oracle/WL10gR3/user_projects/domains/web/bin/startWebLogic.sh.
JAVA Memory arguments: -Xms256m -Xmx768m
WLS Start Mode=Production
CLASSPATH=:/opt/Oracle/WL10gR3/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_wlp1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_cie670/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/jrockit_160_05/lib/tools.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic.jar:/opt/Oracle/WL10gR3/modules/features/weblogic.server.modules_10.3.0.0.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/webservices.jar:/opt/Oracle/WL10gR3/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/Oracle/WL10gR3/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/opt/Oracle/WL10gR3/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/xqrl.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/xquery.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/binxml.jar:
PATH=/opt/Oracle/WL10gR3/wlserver_10.3/server/bin:/opt/Oracle/WL10gR3/modules/org.apache.ant_1.6.5/bin:/opt/Oracle/WL10gR3/jrockit_160_05/jre/bin:/opt/Oracle/WL10gR3/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
x86_64 is not a supported Linux hardware platform for Autonomy.
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32, compiled mode)
Starting WLS with line:
/opt/Oracle/WL10gR3/jrockit_160_05/bin/java -jrockit -Xms256m -Xmx768m -da -Dplatform.home=/opt/Oracle/WL10gR3/wlserver_10.3 -Dwls.home=/opt/Oracle/WL10gR3/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/WL10gR3/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/WL10gR3/patch_wlw1030/profiles/default/sysext_manifest_classpath:/opt/Oracle/WL10gR3/patch_wls1030/profiles/default/sysext_manifest_classpath:/opt/Oracle/WL10gR3/patch_wlp1030/profiles/default/sysext_manifest_classpath:/opt/Oracle/WL10gR3/patch_cie670/profiles/default/sysext_manifest_classpath:/opt/Oracle/WL10gR3/wlportal_10.3/p13n/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/portal/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/analytics/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/apps/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/WL10gR3/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/WL10gR3/wlportal_10.3/portal/lib/security -Dweblogic.Name=AdminServer -Djava.security.policy=/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic.policy weblogic.Server
<Sep 25, 2008 11:34:35 AM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/Oracle/WL10gR3/wlportal_10.3/analytics/lib/system/analytics_sys.jar:/opt/Oracle/WL10gR3/wlportal_10.3/apps/lib/system/groupspace_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/content-mgmt/lib/system/content_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/deprecated/lib/system/commerce_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/lib/system/wlp-schemas.jar:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/lib/system/wlp_content_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/info-mgmt/lib/system/wps_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system/netuix_common.jar:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system/netuix_schemas.jar:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system/netuix_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system/wsrp-client.jar:/opt/Oracle/WL10gR3/wlportal_10.3/light-portal/lib/system/wsrp-common.jar:/opt/Oracle/WL10gR3/wlportal_10.3/p13n/lib/system/p13n-schemas.jar:/opt/Oracle/WL10gR3/wlportal_10.3/p13n/lib/system/p13n_common.jar:/opt/Oracle/WL10gR3/wlportal_10.3/p13n/lib/system/p13n_system.jar:/opt/Oracle/WL10gR3/wlportal_10.3/p13n/lib/system/wlp_services.jar:/opt/Oracle/WL10gR3/wlportal_10.3/portal/lib/system/netuix_system-full.jar>
<Sep 25, 2008 11:34:36 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
<Sep 25, 2008 11:34:36 AM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Sep 25, 2008 11:34:38 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
This does not work:
. /opt/Oracle/WL10gR3/user_projects/domains/web/bin/setDomainEnv.sh
java weblogic.WLSTInitializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> startServer()
Starting weblogic server ...
WLST-WLS-1222359153099: <Sep 25, 2008 11:12:34 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
WLST-WLS-1222359153099: <Sep 25, 2008 11:12:34 AM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WLST-WLS-1222359153099: WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WLST-WLS-1222359153099: WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WLST-WLS-1222359153099: WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WLST-WLS-1222359153099: WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WLST-WLS-1222359153099: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
WLST-WLS-1222359153099: <Sep 25, 2008 11:12:36 AM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://www.bea.com/ns/weblogic/920/domain>
AdminServer.out:
<Sep 25, 2008 10:56:16 AM> <Info> <NodeManager> <Starting WebLogic server with command line: /opt/Oracle/WL10gR3/jrockit_160_05/jre/bin/java -Dweblogic.Name=AdminServer -Djava.security.policy=/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path=/opt/Oracle/WL10gR3/jrockit_160_05/jre/lib/i386/jrockit:/opt/Oracle/WL10gR3/jrockit_160_05/jre/lib/i386:/opt/Oracle/WL10gR3/jrockit_160_05/jre/../lib/i386::/opt/Oracle/WL10gR3/wlserver_10.3/server/native/linux/i686:/opt/Oracle/WL10gR3/wlserver_10.3/server/native/linux/i686/oci920_8 -Djava.class.path=/opt/Oracle/WL10gR3/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_wlp1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/patch_cie670/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/WL10gR3/jrockit_160_05/lib/tools.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/weblogic.jar:/opt/Oracle/WL10gR3/modules/features/weblogic.server.modules_10.3.0.0.jar:/opt/Oracle/WL10gR3/wlserver_10.3/server/lib/webservices.jar:/opt/Oracle/WL10gR3/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/Oracle/WL10gR3/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/opt/Oracle/WL10gR3 -Dweblogic.system.BootIdentityFile=/opt/Oracle/WL10gR3/user_projects/domains/web/servers/AdminServer/security/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Sep 25, 2008 10:56:16 AM> <Info> <NodeManager> <Working directory is "/opt/Oracle/WL10gR3/user_projects/domains/web">
<Sep 25, 2008 10:56:16 AM> <Info> <NodeManager> <Server output log file is "/opt/Oracle/WL10gR3/user_projects/domains/web/servers/AdminServer/logs/AdminServer.out">
<Sep 25, 2008 10:56:17 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
<Sep 25, 2008 10:56:17 AM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Sep 25, 2008 10:56:19 AM CDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - /opt/Oracle/WL10gR3/user_projects/domains/web/<unknown>:13:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp> -
Schema validation error at startup
Configuration:
WL Portal 9.2
Linux Fedora Core 6
I just created a new portal domain and it just does not startup.
The reported exception is:
Schema validation errors while parsing /domains/portal/./config/config.xml - Invalid xsi:type qname: 'ext:wsrp-identity-asserterType' in element realm@http://www.bea.com/ns/weblogic/920/domain>
Schema validation errors while parsing /domains/portal/./config/config.xml - /domains/portal/<unknown>:13:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp
I can't find the schema 'http://www.bea.com/ns/wlp/90/security/wsrp.xsd' neither on the web nor the jars supplied with the product.
Any help would be appreciated.Hi, I think you may be missing the binding-file.xml that should be in your mbean jar which should be in your WL_HOME/server/lib/mbeantypes/...
I am having similar problem and I get this error if I replace the 9.2 MBean jar (generated with MakeMBean) with 8.1 version. The 9.2 MakeMBean utility seems to bundle a bunch of additional jaxb binding files into the jar (xsb, binding-file.xml, *BeanImpl etc). Optionally you can run an 8.1 MBean through the 'weblogic.Upgrade -type securityprovider', this will convert your authentication mbean jar to 9.2 which also includes above mentioned files.
Once you have an MBean jar, generated with the 9.2 MakeMBean you will probably get a similar error in that the startup will fail with error below: If you know how to fix this please let me know as I have spent a day on this with no luck.
...config.xml - C:\...\mydomain\<unknown>:16:9: error: fail
ed to load java type corresponding to t=ucv-db-authenticatorType@http://www.bea.com/ns/weblogic/90/security/extension>
<Feb 15, 2007 9:26:29 AM NZDT> <Critical> WebLogicServer> <BEA-000362> <Server failed. Reason: [Management:141245]Schema Validation Error in :\...\server\mydomain\config\config.xml see log for details. Schema validation can be disabled by starting the server with the command line option: -Dweblog
ic.configuration.schemaValidationEnabled=false>
PS: setting the -Dweblogic.configuration.schemaValidationEnabled=false option only causes the startup to fail as it cannot load the security provider (if this is your default provider I guess?)
Hope this helps. -
Adapter Engine XML Schema Validation Error Surpression
We recently developed a number of web services that are called by 3rd parties outside our network. The web service request once made is picked up by a Web Dispatcher which then forwards the request to the de-central adapter. Both of these components reside within within a DMZ.
We have, as an additional security measure made use of the new Adapter Engine XML Schema validation available with PI 7.1, to ensure that the payload of incomming messages is checked to ensure that it is a known structure.
Now here is my problem, we recently had these services penetration tested by a 3rd party to ensure that they were secure and whilst the report was very good showing no major weaknesses they did pickup on a couple of items including that the fact that if the XSD to be used during payload message validation cannot be found an 'ADAPTER.JAVA_EXCEPTION' is returned to the web service consumer that highlights the path details of where the XSD should be (but could not be found).
This was viewed as useful to an attacker for a number of reasons:
1. Feedback in SQL injection attempts via verbatim DB error messages greatly improves attacker efficiency
2. Path information is useful to the attacker for OS fingerprinting, directory traversal attempts
3. Other miscellaneous stack trace information is useful to an attacker to understand how the application works
Is there anyway this can be surpressed so that the adapter does not show this information in the returned error message - see example message below ?
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema MaintenanceOrderByIDQuery_sync.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiSAPGlobal20~Global\MaintenanceOrderByIDQuery_sync.xsd (validation\schema)
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
at sun.reflect.GeneratedMethodAccessor497.invoke(Unknown Source)
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema Schema1.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiEA-APPLSEGlobal\Schema1.xsd (validation\schema)
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)Hi,
We are having the same problem, so you are not alone.
I had an extensive call with Azure premium support and we where able to determine that:
- Nothing is missing or in the wrong place in my exported .xml file.
- Any changes to the VNET's using the web gui interface of https://manage.windowsazure.com is not possible when you have dns servers and use an gateway
- You can download the .xml configuration file of the network and make manual changes to it, then import it again , to add/remove dns servers and or subnet's.
I am currently waiting for an solution, i have let them lower the urgency from A to B (because i can make changes trough xml) and responded to the next support contact (saying he will continue with the issue) that the problems seems to be with azure and
he should speak with the previous person helping me. I have not heard from Azure support since.
SR Number:115021812414226
Open on:02/18/2015 09:28
> There are networks with and without gateways created and the issue is happening on all the networks.
> We are unable to add or remove the DNS servers. (by web gui)
> Also not able to add or remove any subnets. (by web gui)
> Every time the error message is same but the DNS server name is different. (from another subnet then the one we are changing)
> Created CRI- 3405931, but they said it will need WATS team.
> Confirmed with WATS engineer as well and moving case to WATS.
> Cx agreed to lower the severity of the case as they are able to make changes through the network configuration file.
> But they still want to get this resolved soon.
> Agreed and dropped off, reducing severity to B 24/7.
I hope microsoft is going to resolve this soon, as i do not want to edit my xml for little things like adding a subnet all the time. I have requested an status update in the issue.
Should anyone have more information on this, please share it here. -
BPM Problem: Schema validation error notification
Hello all,
When a schema validation error takes place upon receiving XML messages via HTTP, is there something that can be set up in BPM to notify data owners? (either alert or email)
Regards,
SteveBhavesh,
<i>When you mean source schema validation, does it imply that you want to validate your Source XML before graphical mapping to make sure it meets the Source XML Schema?</i>
validate my Source XML
<i>As you pointed out you are usinga BPM, you can wrap the Transfromation step with a Exception handling block, so when there is a mismatch of Source schema and ite actual message the exception handler will be invoked and in the exception handler you can trigger alerts using the control step.</i>
I'm using an outbound interface (outside BPM) to call the abstract interface (very first step in BPM), and there's a tranformation step after that.
-If the Source schema is wrong, will the error take place at the outbound interface or at the transformation step? If outside at the outbound interface, i wouldn't be able to wrap anything around it.
-Exception handling block means the BLOCK step?
Regards,
Steve -
XML Schema validation error in network configuration. Missing DnsRef
When ever we try to make changes to a Virtual network we receive
XML Schema validation
error in network configuration. Missing DnsRef
We can't make any changes to the Virtual network.
The DNS ref exists as well.
Considering exporting network config and re-importing however we have a lot of networks configured and want to be sure this is the correct way to proceed.
Any feedback much appreciated.
ThanksHi,
We are having the same problem, so you are not alone.
I had an extensive call with Azure premium support and we where able to determine that:
- Nothing is missing or in the wrong place in my exported .xml file.
- Any changes to the VNET's using the web gui interface of https://manage.windowsazure.com is not possible when you have dns servers and use an gateway
- You can download the .xml configuration file of the network and make manual changes to it, then import it again , to add/remove dns servers and or subnet's.
I am currently waiting for an solution, i have let them lower the urgency from A to B (because i can make changes trough xml) and responded to the next support contact (saying he will continue with the issue) that the problems seems to be with azure and
he should speak with the previous person helping me. I have not heard from Azure support since.
SR Number:115021812414226
Open on:02/18/2015 09:28
> There are networks with and without gateways created and the issue is happening on all the networks.
> We are unable to add or remove the DNS servers. (by web gui)
> Also not able to add or remove any subnets. (by web gui)
> Every time the error message is same but the DNS server name is different. (from another subnet then the one we are changing)
> Created CRI- 3405931, but they said it will need WATS team.
> Confirmed with WATS engineer as well and moving case to WATS.
> Cx agreed to lower the severity of the case as they are able to make changes through the network configuration file.
> But they still want to get this resolved soon.
> Agreed and dropped off, reducing severity to B 24/7.
I hope microsoft is going to resolve this soon, as i do not want to edit my xml for little things like adding a subnet all the time. I have requested an status update in the issue.
Should anyone have more information on this, please share it here. -
I can’t get the Microsoft Office SharePoint Task integration to work with any SharePoint 2010 Workflows. When any end user clicks the “Open this task…”
button from outlook (or any other office application) a warning dialog appears stating that:
“Outlook cannot open a new.
The form contains schema validation errors.”
The error details are:
Element '{http://www.w3.org/1999/xhtml}div' is unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
Some points to note:
I can replicate this using on several computers running as different users.
I have full control over the site and the task I am trying to open.
When I navigate via the SharePoint site I can open the task.
The Info Path form that cannot be opened was automatically created by automatically SharePoint designer / InfoPath. I have subsequently deleted the form and published
the workflow (which created the InfoPath form again).
I am running Mircosoft Office Professional Plus 2010 version 14.0.5128.5000 (32-bit)
One workaround is to remove the “Open this task…” button as per
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/eb273ee9-6a4b-409c-8eb0-5351bb113386/. This is not ideal and will be my last resort.
Any suggestions and or thoughts appreciated.
Thanks!Yes, I tried that. It did not work for me.
I have 4 site collections. The main site collection is the only one that I receive the error.
When the user clicks on the email link and opens the document for approval, they receive the following error when they click on "Open This Task".
Element '{http://www.w3.org/1999/xhtml}a is unexpected according to content model of
parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
There is nothing wrong with the task list itself, just the link from the Office 2010 client.
I am wondering if there is a web config or other file on the server that is specific to the site collection??
Tracey -
Excel cannot open the new form. The Form contains schema validation errors.
i am running the approval workflow on a document library, while trying to open Excel
file i get the error.
Excel cannot open the new form. The Form contains schema validation errors.
Detailed error:
Element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body' is
unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}SharePointListItem_RW'.<o:p></o:p>
Expecting: {http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}WorkflowLink,
{http://schemas.microsoft.com/office/inf....
neerajHi,
According to your description, my understanding is that when you are running approval workflow and opening the Excel file, then it will occur the error above.
For a better troubleshooting, I suggest you can try to create a new normal excel file and then run the workflow and open the file to test if it works. It will help to figure out if this is the file itself issue or the SharePoint issue.
Also, please provide some more detailed information such as screen capture, it will easier to find the root cause of the issue.
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Processing Schema Validation error in BPM?
Hi all,
We have a file to IDOC scenario where if the schema validation fails on the file adapter sender agreement, we want to pull the filename and send it in an error email. So, we are talking about the adapter specific message attribute "Filename".
unfortunately, this does not seem to be available as a container element for alert catagories in ALRTCATDEF. So, we are starting to look into using BPM to send a email via the email adapter. However, since the validation happens prior to BPM being called I am at a bit of a loss. Any ideas on how to get the email with the filename out to the suport group would be appreciated.
Thanks,
Chrispackage com.validate;
import com.sap.aii.mapping.api.*;
import com.sap.aii.mappingtool.tf7.rt.Container;
import java.io.*;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.*;
public class ValidateXML extends AbstractTransformation {
public void transform(TransformationInput transformationInput, TransformationOutput transformationOutput) throws StreamTransformationException {
OutputStream outputstream = null;
try {
InputStream inputstream = transformationInput.getInputPayload().getInputStream();
outputstream = transformationOutput.getOutputPayload().getOutputStream();
byte[] b = new byte[inputstream.available()];
inputstream.read(b);
String XMLinputFileContent = new String(b);
// define the type of schema - we use W3C:
String schemaLang = "http://www.w3.org/2001/XMLSchema";
// get validation driver:
SchemaFactory factory = SchemaFactory.newInstance(schemaLang);
//Place XSD file in PI server same as http://help.sap.com/saphelp_nwpi711/helpdata/en/44/0bf1b3ec732d2fe10000000a11466f/frameset.htm
//OR I think you can place any where on server.
File XSDfile = new File("C:/xi/runtime_server/validation/schema/SchemaFile.xsd");
// create schema by reading it from an XSD file:
Schema schema = factory.newSchema(new StreamSource(XSDfile));
Validator validator = schema.newValidator();
// at last perform validation:
validator.validate(new StreamSource(XMLinputFileContent));
//If XML it not valid, exception will be thrown, if it is valid sent this PassOutputXML to output
String PassOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>FileName.txt</Name><Validation>Pass</Validation> </ns:MT_OutputXML>";
outputstream.write(PassOutputXML.getBytes());
} catch (Exception exception) {
//Get File name using http://help.sap.com/saphelp_nwpi711/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Container container = null;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String inputFileName = conf.get(key);
String FailOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>" + inputFileName + "</Name><Validation>Fail</Validation> </ns:MT_OutputXML>";
try {
outputstream.write(FailOutputXML.getBytes());
} catch (IOException ex) {
exception.printStackTrace();
ex.printStackTrace(); -
i wrote a small app that read a COLLADA instance document and convert it to a html document. First I wrote some xsl stylesheets and now I'm using a JAXP DOM parser to parse the instance document and a JAXP xslt transformer to perform the transformation.
When I use a non-validating parser it seems all work well but when i try to use a validating parser i get this message error:
org.xml.sax.SAXParseException: src-resolve: Cannot resolve the name 'xml:base' to a(n) 'attribute declaration' component.
What does it mean?
When I'm at my home pc,I get the error above but when I'm at university lab pc I don't get any error. WHY!? I'm using the same files.
Thx for your helpi'm using jdk 1.5.0_11 and here is my java code.
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.w3c.dom.Document;
import org.w3c.dom.DOMException;
// For JFileChooser
import javax.swing.*;
// For write operation
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
import java.io.*;
public class StylizerMio2 {
// Global value so it can be ref'd by the tree-adapter
static Document document;
// Constants you'll use when configuring the factory
static final String JAXP_SCHEMA_LANGUAGE="http://java.sun.com/xml/jaxp/properties/schemaLanguage";
static final String W3C_XML_SCHEMA="http://www.w3.org/2001/XMLSchema";
//Constants used to specify the schema in the application
static final String schemaSource="COLLADASchema_141.xsd";
static final String JAXP_SCHEMA_SOURCE="http://java.sun.com/xml/jaxp/properties/schemaSource";
public static void main(String[] argv) {
/*if (argv.length != 2) {
System.err.println("Usage: java StylizerMio stylesheet xmlfile");
System.exit(1);
// Generating a parser
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
//Configure the factory to generate a namespace-aware,validating parser
factory.setValidating(true);
factory.setNamespaceAware(true);
try{
factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
// Associate a document with a schema
factory.setAttribute(JAXP_SCHEMA_SOURCE, new File(schemaSource));
catch (IllegalArgumentException x) {
// Happens if the parser does not support JAXP 1.2
x.printStackTrace();
// Associating the document with the schema
try {
JFileChooser chooser = new JFileChooser();
ExampleFileFilter daeFilter = new ExampleFileFilter();
daeFilter.addExtension("dae");
daeFilter.setDescription("documenti istanza COLLADA");
chooser.setFileFilter(daeFilter);
chooser.setCurrentDirectory(new File("."));
int returnVal = chooser.showOpenDialog(null);
if(returnVal == JFileChooser.APPROVE_OPTION) {
System.out.println("You chose to open this file: " +
chooser.getSelectedFile().getName());
File stylesheet = new File("trasformazione.xsl");
//"Moon Buggy/lunar_vehicle_tris.dae"
File datafile = chooser.getSelectedFile();
DocumentBuilder builder = factory.newDocumentBuilder();
//Handling validation errors
builder.setErrorHandler(
new org.xml.sax.ErrorHandler(){
// ignore fatal errors (an exception is garaunteed)
public void fatalError(SAXParseException exception)
throws SAXException{}
//treat validation errors as fatal
public void error(SAXParseException e)
throws SAXParseException
throw e;
// dump warnigs too
public void warning(SAXParseException err)
throws SAXParseException
System.out.println("** Warning"
+ ", line " + err.getLineNumber()
+ ", uri " + err.getSystemId());
System.out.println(" " + err.getMessage());
document = builder.parse(datafile);
// Use a Transformer for output
TransformerFactory tFactory = TransformerFactory.newInstance();
StreamSource stylesource = new StreamSource(stylesheet);
Transformer transformer = tFactory.newTransformer(stylesource);
DOMSource source = new DOMSource(document);
// SaveDialogue JFileChooser
ExampleFileFilter htmlFilter = new ExampleFileFilter();
htmlFilter.addExtension("html");
htmlFilter.setDescription("documento html");
chooser.setFileFilter(htmlFilter);
chooser.showSaveDialog(null);
//"Moon Buggy/lunar_vehicle_tris.html"
File htmlFile= chooser.getSelectedFile();
StreamResult result = new StreamResult(htmlFile);
transformer.transform(source, result);
} catch (TransformerConfigurationException tce) {
// Error generated by the parser
System.out.println("\n** Transformer Factory error");
System.out.println(" " + tce.getMessage());
// Use the contained exception, if any
Throwable x = tce;
if (tce.getException() != null) {
x = tce.getException();
x.printStackTrace();
} catch (TransformerException te) {
// Error generated by the parser
System.out.println("\n** Transformation error");
System.out.println(" " + te.getMessage());
// Use the contained exception, if any
Throwable x = te;
if (te.getException() != null) {
x = te.getException();
x.printStackTrace();
} catch (SAXException sxe) {
// Error generated by this application
// (or a parser-initialization error)
Exception x = sxe;
if (sxe.getException() != null) {
x = sxe.getException();
x.printStackTrace();
} catch (ParserConfigurationException pce) {
// Parser with specified options can't be built
pce.printStackTrace();
} catch (IOException ioe) {
// I/O error
ioe.printStackTrace();
} // main
} -
Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment
I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
Abort Retry Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC ALASKA
A M I
FACP ALASKA
A M I
HPET ALASKA
A M I
MCFG ALASKA
OEMMCFG.
SSDT AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned. 0
unindexed files recovered. CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
43468 KB in 21139 indexes.
0 KB in bad sectors.
253139 KB in use by the system.
65536 KB occupied by the log file.
1905048300 KB available on disk.
4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts. -
BPMN 11g - Process initiation schema validation error
Gurus,
we are facing one absurd issue.
When we create a BPMN process and expose it as a service in composite then the WSDL it creates automatically does not have 'formElementDefault' attribute under <xsd:schema > element..
hence if we test from EM after enabling schema validation [composite-->reference->properties] then it show error....else it works fine randomly...sometimes work sometimes does not.... any clue.
we have tried adding elementFormDefault="qualified" this but no luck. please suggest.
<?xml version="1.0" encoding="UTF-8"?>
<!--########################################################################################-->
<!--#### ####-->
<!--#### THIS IS AN AUTO GENERATED FILE. PLEASE DO NOT MANUALLY MODIFY ####-->
<!--#### CHANGES TO THIS FILE MAY PRODUCE UNEXPECTED BEHAVIOR AND WOULD BE OVERWRITTEN ####-->
<!--#### ####-->
<!--########################################################################################-->
<wsdl:definitions targetNamespace="http://xmlns.oracle.com/bpmn/bpmnProcess/Process" xmlns:tns="http://xmlns.oracle.com/bpmn/bpmnProcess/Process" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" >
<wsdl:types>
<xsd:schema targetNamespace="http://xmlns.oracle.com/bpmn/bpmnProcess/Process" added by me+_ elementFormDefault="qualified">
<xsd:element name="operationCallbackResponse">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
<xsd:element name="operation">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
Thanks,
BiltuPlease make sure that main xsd uses import or include tag to reference both schema1.xsd and schema2.xsd. If the main xsd does not do it, Pi cannot verify it. Since you package all the files as zip file, also make sure the path for the secondary files are in proper location.
In short, the import element allows you to use schema components from any schema; the include element allows you to add all the components of an included schema to the containing schema. If the target namespace is same for both then include tag should be good enough. If you don't find one, you might have to use include tag element in the main or parent xsd file.
Edited by: Baskar Gopal on Jan 31, 2012 5:18 PM -
Hi,
Have a scenerio in which consecutive mapping needs to be done.The first mapping is a Java Mapping in which XML schema validation needs to be done.
If XML Schema validation is sucessful(Mapping 1),then graphical message mapping(MM_Entry) needs to be performed.
I have uploded a jar file in imported Archives which contains
1)Schema file(inputSchema.xsd): This is an XSD file which is generated in XI....XSD fomat of Source message type
2) The java Class file
Following are few lines of code for better idea:
public class SAXParser implements StreamTransformation {
public void execute(InputStream input, OutputStream output) throws StreamTransformationException {
SAXParserFactory saxParserFactory = SAXParserFactory.newInstance();
InputStream mySchema = this.getClass().getClassLoader().getResourceAsStream("inputSchema.xsd");
SAXParser saxParser = saxParserFactory.newSAXParser();
saxParser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");
saxParser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",mySchema);
saxParser.parse(input, new HandlerBase());
After above step(parsing),input is copied to output and streams are closed as follows:
byte[] buf = new byte[4096];
for(int len=-1;(len=input.read(buf))!=-1;)
output.write(buf,0,len);
input.close();
output.close();
After sending correct source message from input ,i am getting following error:
Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_Entry_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Parsing an empty source. Root element expected!Daniel,
As I've said, I've used it successfully in PI 7.0 SP10.
You're right about documentation, it says that by default, Java 1.4.2 mark() and reset() methods of InputStream class are not fully implemented (mark() would do nothing and reset() would always throw an IOException). And that would be the expected behavior...
...unless the SAP developers have extended the InputStream class to include actual implementatios to the mark() and reset() methods.
I'm not saying that they have, but it would be possible, wouldn't it?
It does work, after all...
Regards,
Henrique. -
Hi!
A am parsing XML using JAXP 1.3. If i parse my XML with schema validation, i got an exception: org.xml.sax.SAXParseException: http://www.w3.org/TR/xml-schema-1#cvc-type.3.1.1?g_start&xsi:nil at line: 48 column: 27.
XML line: 48:
<g_start xsi:nil="true"></g_start>Schema for this element:
<xsd:element name="g_start" type="xsd:date" minOccurs="0" nillable="true"/>If i validate my XML with XMLSpy, it's OK.
Is it problem in my XML, or something wrong with JAXP?i wonder what happens if you use
<g_start xsi:nil="true"/>Nothing changes.
I make some small sample, if your wold like to test it.
<?xml version = "1.0" encoding="UTF-8" standalone="yes"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="root">
<xsd:complexType>
<xsd:choice maxOccurs="unbounded">
<xsd:element name="elem" type="xsd:boolean" minOccurs="0" nillable="true"/>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<?xml version = "1.0" encoding="UTF-8" standalone="yes"?>
<root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<elem xsi:nil="true"></elem>
</root>
SchemaFactory schemaFactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
Schema schema = schemaFactory.newSchema(new File("schema.xsd"));
DocumentBuilderFactory documentFactory = DocumentBuilderFactory.newInstance();
documentFactory.setSchema(schema);
DocumentBuilder documentBuilder = documentFactory.newDocumentBuilder();
Document document = documentBuilder.parse(new File("data.xml")); -
Validation Errors with adf dialog
Hi!
We are using Oracle BC and ADF Faces.
I'm having some validation problems with a adf dialog.
The scenario is the following:
An editing page.
A field in this page has a LOV.
The LOV has some search criteria, and a search button.
When the button is clicked, the results appear on a table. The user selects one and the lov is closed.
When filling the editing page the Lov is opened.
When i don't put search criteria in the fields, no validation errors appear.
If i put one or more search criterias, validations errors of the editing page appear.
Why is this happening?
Thanks.Please post a link to your site.
Gramps
Maybe you are looking for
-
IOS 8 voice dialing, "Just to confirm..."
What a huge step backward in the usability of my iPhone. Instead of telling Siri, "call Mom mobile" and getting the response "calling Mom mobile" followed by the call going through, Siri now responds with, "Just to confirm, would you like to call Mo
-
How can I keep my RAW photo files from converting to JPEG???
How can I keep my RAW photo files from converting to JPEG???
-
Unable to aquire IP address on secured network via wireless.
I have a WRT54GS which we secured the network on over a year ago. (WPA encyption setting). This christmas we got the kids one of those mini-laptops but when we went to put it on our wireless network it could not aquire the IP address. Using the ether
-
Unable to activate Windows 8.1 after system reset
I am working on an HP Omni computer for some friends of mine and I am having a bit of an issue. I had to run a reset to fix an issue in Windows. This reinstalled Windows from the restore partition on the hard drive. After I did this and I started
-
Most the photos/music/memos are memories I'd like to keep but if I took it into the store would they wipe it?