Schematic drawings and part numbers powerbook 190

Specifically what the adapter plugs into (female) inside the powerbook is gone. I have the original and correct adapter but what receives it inside? I have new one also, I just want to tinker.

You should be able to get a service manual at:
http://z1.micro.umn.edu/ucs/Apple%20Service%20Doc/powerbook_190.5300.pdf

Similar Messages

Acrobat Part Numbers & Upgrade question

Is a list of Acrobat products by part number available for viewing? The labels show an item and part numbers and a UPC number. I am unable to determine the differences between Acrobat X Pro part numbers, 65083161, 65083248 and 65101219.
Also, can Acrobat 8 Pro be upgraded to X or XI Pro? Thanks.

Hi KMarcy,
Please elaborate your issue so that i can interpret your issue and assist you more accurately.
Regards,
Rahul

PowerBook G4 Aluminum 15" Keyboard Part Numbers

I'm replacing the keyboard on a 15" powerbook g4 aluminum.
There are two seemingly identical keyboards for this model with different part numbers on the ribbon cable: AEQ43PLU010 and AEQ16PLU039.
Are these two parts interchangeable, say as a result of different manufacturing sources or are there differences in the pin-out on the ribbons?
In other words, I'm replacing a AEQ16PLU039; can I use a AEQ43PLU010?
Thanks,
-Rob

Just a quick note. My 1.67 model was the last one before the switch to intel. The left shift key would sometime activate along with the option key, causing some really weird behavior. I took the thing apart and noticed the left shift key 'nipple' rubber had separated for more than 50% of the circumference. I patched it with some silicone caulk and it seems to be a little happier. Previous to that, I took apart an older 1.25ghz machine to swap keyboards, but the two are not compatible. The ribbon cables are different and the newer version also has cables that interface with the trackpad. Probably part of the multi-touch nature of the newer trackpads. Best of luck with your keyboard swap and all the tiny screws!

How to handle same product with different part numbers and pricing in SAP.

I am a new user and want to learn if the following scenario can be handled by SAP.
Our business buys a product from a supplier which has 2 different part numbers and prices. It is the same product. One is the primary product whilst the other is available only as an upgrade option with a different part number to a mainline product at a cheaper price .
Our issue is that we sometimes buy the upgrade option with a mainline product to get the better price even though these go into stock. Basically we need to have the items linked with both part numbers in SAP at different prices but inventory both in and out only going against the primary part number. Any ideas?

Thanks Jitin
I did give them different part numbers and then attached a Bom containing the primary part number against the upgrade option however I really need to have the secondary item as a sales and purchase item but non inventory so the stock comes from the primary part. Ideally if we receipt the goods in as the secondary number the inventory goes to the primary part. If the second number is an inventory item then I have the issue of the same part with different part numbers sitting in stock at different prices and having to rely on employees understanding the difference.
Sorry to be so confusing. I will do some more testing over the weekend and see if I can find a suitable solution.
Thanks
Martin

HP in part numbers for ink differ in the uk and the US for the same item ?

Purchasd my printer in the UK. PHOTOSMART 2575 ALL IN ONE
Trying to source the correct HP ink
C8767E on the back of the cartridge. is not recognised
C8767EE is recognised as HP 339 Black Inkjet
I am directed to the US site.
niether is recognised by the us site where i will buy my replacements
if i search the US site by model number I get HP98
http://h10025.www1.hp.com/ewfrf/wc/product?product=457333&lc=en&cc=us&dlc=en&lang=en&cc=us&y=10&x=7
and no sign of the 336 337 or 339 as listen on page 85 of my userguide.
I assume there is some cross matching of part numbers between the UK and the us site.
Having spent two weeks wandering around all the stores in Mandeville and Kingston Jamaica ( no mean feat i can tell you) looking for the 33 series as lised in the userguide. It will be with mixed blessins if there is a comparison chart between what the UK says I can use and what the us says I can. Then I can go shopping locally with my us part numbers and people might actually have stock.
If i assume that the 98 is the correct number there is not even a list on the site to confirm what printers the 98 can be used on.
Come HP you have not done well on this issue. Basicis such as catrirdge supplies should have global partnumbers or I should be able to easily acesss a compatibility Matrix.
And ive not started looking for colour yet.

Hi, if you purchased the printer in the UK and have now relocated you'll need to get the region reset on the printer. You can do this by contacting phone support ( Contact HP ) . Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Where can we find the part numbers for Multisim and Ultiboard professional versi

I want to purchase Multisim an Ultiboard, professional version. We got a quotation with the following answer:
Part number: 852798-11J Upgrade, NI Academic site licence;Q3 2009 Department Teaching Circuit Design Software Option
Part Number:900798_11    NI academic Site Licence-Department Teaching Maintenance for Circuits Option Includes automatic SW upgrades for 1 year
I have no idea where I can find those part numbers on the NI web site and for me the qouotation reffers to the academic version not the professional.
Can anybody from NI clarify the mystery.
John

Johnnelu,
Thanks for your reply.   If you received a quotation, please email me directly with the quotation number and I will have someone update this for you. I am not sure why you would have received a quote on the educational version in place of the Professional version.
Specifically answering your PN questions... here are the current P/Ns for the Professional Design Suites (Multisim and Ultiboard).
NI Circuit Design Suite, Base ->          779930-09
NI Circuit Design Suite, Full ->            779928-09
NI Circuit Design Suite, PowerPro -> 779927-09
http://www.ni.com/multisim/professional.htm
You can get price information online - you will need to select the specific item on the left and
set your country code on the top.
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St 1-A
South Portland, ME 04106
Phone: 207 892-9130
Email: [email protected]

G5 Dual 2.0 GHz won't turn on. Motherboard part numbers and compatibility.

The power LED will blink three times in succession indicating a memory issue. Have swapped RAM, PRAM reset, PMU so I think my m-board is bad. Would like to purchase a used one. Are original dual G5 2.0 GHz motherboards interchangeable? If so, what are part numbers I should be looking for?

Kane666-
Greetings and welcome to the Apple boards.
This document is to help with troubleshooting a computer that won't turn on.
My guess is that you need to do a PMU reset.
Luck-
-DaddyPaycheck

Fan Part Numbers for Cisco 2801, 2821 and 2851 fans

I have P/Ns for Cisco 2811 router fans as follows:
ACS-2811-FAN-1/2= and ACS-2811-FAN-3=
But I do not have part numbers for fans used in 2801, 2821 and 2851 routers.
Does anyone have these prt numbers?
It doesn't make sense to change the whole router for just a fan failure.

Hi
for the 2821 and 2851 routers the fan is the same : ACS-2821-51-FANS=
for 2801 the whole chassis needs to be replaced

Where to purchase part numbers 03T9602 and 03T9626 for my E31 SFF?

I would like to replace my optical drive with a HDD. The part numbers for the caddy and bezel are 03T9602 and 03T9626. Where would I buy them and from who?

You can buy any hard drive from amazon or newegg.com and the keyboard is

Need Suggestion to update existing EMP and ASG Numbers

Hi All,
Oracle E-Business Suite 11.5.10.2 version
Live with HR,Payroll,GL,Payables,Purchasing, Receivables,Order Management
Oralce DB 9i
Legislation: US
State mandates that no social security numbers should be
electronically transmitted outside the system. Since we have
Employee Number set as "Use National Identifier Number" in Business
Group definition, both Employee number and Assignment Numbers are
generated with National Identifiers. In most of the reports, alerts,
data files we use Employee Number/Assignment Numbers and
electronically transmit them to third parties.
This is the reason why we want to change the existing Employee
Numbers and Assignment Numbers to use Automatic Sequence numbers
rather than National Identifiers.
If anyone have done this earlier, could you please share your
experience with me. What is the best practice/solution to approach
it.
Thanks,
Sridhar

Hi,
Have you handled the case of modifying the existing users in your scheduled task or in OIM. How will the OIM know whether the user coming from flat file is an existing or a new one. If you have not, then first try to find the user and update it
This is the plain GTC Flat File connector and I have not done any configuration in OIM to determine whether user is an existing user or a new user.This connector is able to create new user successfully .
Please provide information about what are all the steps needed to configure for updating an existing user
Regards,
Madhu

How do i find my Apple Parts Numbers for my Macbook Pro?

I have a macbook pro, 2.4GHz Core 2 Duo. Model number is A1212.
I was wondering how I could find out what the correct apple part number is for a replacement top case. (the place where you put the keyboard).
I have no problem replacing the case, I just need to know what the part number is.
I also have another top case that I ordered off ebay and I would like to know how to find the correct apple part number for that case as well.

A1212 is not your model number. Check here for model numbers:
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
Check here for parts:
http://www.ifixit.com/Categories/MacBook-Pro-15-Inch/85
But for Apple part numbers you may need to call ifixit or contact Apple.

Material Master: All part numbers from one vendor

Hi everyone,
is it possible to list all part numbers supplied by a defined vendor - in the material master?
I was told by our purchasing department that ME2L would do the job, however I'm not authorized to execute the transaction (for no reasons) and our admin is on holidays ;-)
I'm sure a similar report must be available in another way...
Any suggestions?

Roman,
ME2L is the SAP standard listing of purchase orders by vendor; it is not necessarily a comprehensive list of 'all part numbers supplied by a defined vendor - in the material master'.
If, however, this is adequate for your purposes, you could try other standard Purchase order listing transactions:
ME2W, ME2M, ME2C, ME2N.
Assuming those transactions are not available to you, you might want to download the raw purchase orders from the tables using a table browser such as SE16N:
EKKO which contains the purchase order number and the vendor number
EKPO which contains the purchase order number and the material number.
Joining these two using desktop software would give you similar info that you would get from ME2L.
As I stated earlier, ME2L doesn't really meet the requirements you stated. The listing that actually meets the requirements depends upon your company's business processes. In some companies, that listing would have to come from the purchase info records. Such a listing is available from ME1L and a few others.
Best Regards,
DB49

Powerbook 190 Series Transfer to PC

A co-worker of mine has a PowerBook 190 which he just needs files from. I have connected twop Macs using an etherner crossover cable but never a Mac and PC. What I want to do is connect them and get then recognized and just transfer the files from the PowerBook to the PC via ethernet crossover cable. He has not other expternal periphials so believe this is his only option. I have been searching around the Web but so far I have had no luck. Anyone can point me to some documentation to help? Thank you.
UPDATE: I just read something that this model does not even have an ethernet jack so you need a PC card with ethernet? Or use the serial port? What model?
UPDATE: I remember using an adapter that is sometimes called an EtherModem which is modem on one side to ethernet on the other.
-=SunnaH=-
12 iBook G4 1.33 Combo Airport Extreme Mac OS X (10.4.7) Dell 2004 ext. display and Lacie d2 eXtreme 250 gig.

SunnaH,
You have the more elegant option in hand. However, from the 'For What It Is Worth' standpoint of finding alternatives, Lap Link gives motherboard to motherboard solutions (at 157,000 baud in 1980s) for laptop data transfers.
"I have connected two Macs ... but never a Mac and PC. ...
- believe this (ethernet) is his only option. -
- use the serial port? What model? -
UPDATE: I remember using an adapter that is sometimes called an EtherModem which is modem on one side to ethernet on the other.
Comm Port to Comm Port has been available since about 1987 or 1988. I remember driving to Lap Link's home office in the shadows of Microsoft's new Redmond Headquarters and buying one of their MacLink cables the first week it was sold. One plug goes into the printer port of any legacy Mac from the SE on up and the other end plugs into the comm port of any PC.
Even then, port configuration on the Mac side was plug and play. The instructions stated that if there were any communications problems, they would be on Microsoft's side.
Lap Link should still be around - Googling brings up a number of seemingly current products, some of which are 'discontinued by vendor' and one
"Laplink PC To PC Communication Cable" at this site:
http://www.amazon.com/Curtis-PC075-08-Parallel-Laplink-Communication/dp/B00004Z5 IR/ref=sr111/002-5472956-4361654?ie=UTF8
which states: Date first available at Amazon.com: September 4, 1973.
I find the date to be highly suspect because neither Amazon nor PCs existed back then! Be that as it may, direct cabling does exist.
Jim

Duplication in part numbers should not accepted while creating material ma

Hi all,
How can i set Duplication in part numbers should not accepted while creating material master. How can do this requirment plz help me.
thanks
ramesh

hi,
please check is there any user exit or BADI available and make use of it.

MacBook Pro Retina display part numbers

I'm trying to find a replacement for my MacBook Pro (Retina, 15-inch, Early 2013) display but there is 3 different part numbers compatible with my model (661-7171 , 661-6529 and 661-7032), does anyone knows the differences between those three part numbers?
Thanks,

Open up activity monitor and under all process, see how much dock is using. highlight it and hit quit process.
since you're already at activity monitor, hit quit process on anything else using more than 10% of your CPU's resources.
see if your Retina runs cooler once you've done that.
good luck.

Schematic drawings and part numbers powerbook 190

Similar Messages

Maybe you are looking for