SCM - APO Technical Training Manuals.

Hi all...
Where can I found the technical manuals for SNP, PP/DS and DP??...
Regards
Angel Gonzalez

Hi Angel,
Please check this SAP standard documentation:
SCM 4.0:
http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1:
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0:
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
Hope this will help to start with.
Regards,
Siva.

Similar Messages

  • Any SCM-APO ABAPpers out there ????

    Hey folks -
    In my new job I'm going to have to do some exit/BAdI programming in SCM-APO.
    Somnath Manna has told me that over in the SCM-APO Forum,  the expertise is primarily functional, i.e. not many "techies" post or respond there.
    So who's going to answer my questions?
    Which of the "regulars" here at the ABAP Forum know the technical side of SCM-APO?
    Come on, folks ... I know you're out there ... !
    Regards
    djh

    Hi,
    You need to create a new ORDER_NUMBER every time a new order is created
    Best regards,
    Leandro Mengue

  • SAP SCM-APO

    Experts,
    I don't know, Is it the right place to post, but I am confident about only your suggestions.
    I need your valuable suggestion to learn and built my career in  SCM APO. I have been into technologies ABAP,  SAP Console, RFID, WM, and have knowledge about SCM EWM. I am very much interested to learn SAP APO,but I don't have knowledge about this module how the future will be.
    Your valuable suggestions are appreciated.
    Thanks in advance...
    Sridhar

    Hi Sridhar,
    You sure have very good experience in SAP but please let me know if you have any domain experience as well in any Industry. Because WM or EWM is not going to be of any help to you in understanding the business requirements. More over the Modules that are primarily used by the clients are Demand Planning, Supply Network Planning, Production Planning and Detailed Scheduling,
    Global Availability to Promise, Transport Planning and Vehicle Scheduling.These are the key modules for which there is a reuiqrement for Consultants.
    So I would suggest that instead you should try for BI which has very high requirements in the Market as of now and with your Technical background picking up BI should not be an issue.
    This is my personal opinion... Choice is yours
    Thanks,
    Harsh

  • Client concept for SAP SCM APO and SAP TM

    Hello,
    We are installing SAP SCM APO 5.1 (SNP, gATP, DP) and SAP TM 7.0 (ramp up). Both connect via CIF  to ECC 6.0 SP3. As far as my knowledge goes for CIF, both master data and transactional data is exchanged via CIF.
    In ECC we have a three client concept:
    100 customizing only
    200 customizing + master data (golden client)
    300 customizing + master data + transaction data
    Can we use a similar model for TM and SCM APO as well? Should we then only connect ECC-300 to TM-300 and ECC300 to SCM-300 via CIF?
    I have also heard that also some ECC customizing is transferred via CIF to SCM/TM. Is that true and does that change this model?
    Regards,
    Rob Veenman
    SAP Basis.

    Rob,
    As a general rule of thumb, for each ECC client you will probably want an SCM client.  From your landscape description, it is not clear to me in which clients you perform the everyday functions of development/test/production, but I guess you have already worked that out.  Without knowing exactly how you manage your environment, I will say that it is probably a good idea to have active CIF connections between each of the three pairs of clients.  Once you have set up a single connection between your first pair (ECC/SCM), you will find that setting up the second and third is pretty trivial. 
    Yes, quite a bit of ATP configuration can be CIFd across.  Typically, you do this one time, and then lock the transfer of config out (there is a config setting in SCM to stop further transfer of config).  From that point forward, any config that must be parallelled in both systems is usually done manually in both systems.  Notable exceptions are Factory Calendars, units of measure, and Fiscal Periods, which can be pulled across from ECC to SCM any time you want via standard program.
    Regards,
    DB49

  • What r the prerequisites for implementation scm-apo in ECC 6.

    HI,
    what r the prerequisites for implementation scm-apo in ECC 6.
    Thanks,
    Ashutosh
    9891595497

    Hi Ashutosh,
    you can find all informations about the implementation (installation /upgrade) of SCM on the SAP help portal.
    In http://help.sap.com choose in "SAP Business Suite" the "SAP Supply Chain Management".
    In Knowledge Center for SAP Supply Chain Management (SAP SCM) choose the required SCM release e.g. SAP SCM 5.0  and open it.
    Here under "Installation, Upgrade, Master and Operation Guides" you can find all necessary information about the installation, technical upgrade and operation of SAP SCM.
    The Master Guide for SAP SCM provides important information about the installation of the relevant scenarios and the components. It links to all other documents that are required for the implementation of a specific scenario, for example to the Upgrade Master Guide, which is the important overview guide for upgrading scenarios . 
    I hope I could help you with these informations.
    Regards,
    Tibor

  • To load data from a cube in SCM(APO) system to a cube in BI system.

    Experts,
         Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
    Thanks,
    Meera

    Hi,
    Think in this way,
    To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO,  then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
    Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
    Thanks
    Reddy

  • Is inDesign the best product for publishing an interactive training manual?

    I am building an interactive training manual for a fire department and I need to find out the best way to publish this document for use on an iPad or other tablet.  I will be embedding video, text, and photos, along with stacking photos for the 360 degree view.  So far I have read that there is a 2GB size limitation for articles.  I've also read that there is was way to publish privately if it becomes difficult to download from acrobat.com.  I would like this training manual to be all inclusive without having to break it up into multiple articles.  I would like to embed over 3 hours of video, over 200 photographs, over 260 pages of text, and have interactivity throughout.  Is this out of inDesign's scope?  Is there a way to publish this large of a document to multiple iPads without using the App Store or Android Market?  I'm just starting out so I'm looking forward for any constructive help I can get.

    HOW interactive are we talking here? Buttons with rollovers, menus, or the ability to fill in answers like a workbook?
    A freelance client of mine wanted to prepare a workbook with "interactivity" and all looked well... until i was told what "interactive" meant. This example was a science workbook for schools which behaved as a facsimile of the normal book which would be filled in by hand, except that answers were not always checkboxes or text. Sometimes answers would be:
    plot a graph
    draw a picture of an amoeba (for example) and label the parts; or draw the diagram of isopropyl alcohol;
    fill in a crossword
    join the correct reducing agent to the correct oxidising agent
    AFAIK this kind of interactivity isn't possible with the off-the-shelf indesign, and i don't know of any third party software which provides this kind of interactivity. Yes, the author could have been asked to rephrase the questions to fit the limitations of indesign's fill-in forms and interactivity, but the author did not want this.
    Also, is tablet-specific software the right platform to use? Perhaps a website with a paywall may be a better form of distribution and construction, allowing a RIA (Rich Internet Application) to be made for the project.

  • How to Use Function_Loader_Inlay in SCM APO Version 4?

    Hi ,
    I was going through the SE38 - Program - Function_Loader_Inlay , to check the possibilities of upload and download product/location combinations in SCM APO version of 4.0.
    But I am not able to use it as per the selection screen given.
    Please let me know if some one has used the same.
    Any inputs regarding the documentation OR how to use would be  appreciated.
    Thank you - Prasad.

    HI,
    We do not use this program.
    For Characteristic combination creation as per product- location we use transaction /sapapo/mc62 inthat
    Create characteristic combination --> infoprovider file
    I would also like to know more about APOLoder which uses program which you have mentioned.
    Function_Loader_Inlay  report is no official SAP software.
    It encapsulates ApoLoader functionality inside APO system

  • [Beginner:] Incorporation of ECC, BI and SCM APO Inquiries

    Hi All,
    I would like to seek your help on something I am working on. We have this supplies procurement planning tool that I was helping to create. Our general objective is to create a tool that will give a forecast of supplies that people need to procure from a facility for the future months. I am under BI and I am wondering on the basics regarding BI and SCM APO data flows. Honestly, I am still clueless on this. I have seen from our systems that most loads come from APO going to BI. Is it always that way? Are data from ECC considered as well?
    Hoping to hear lots of advises on this. Thanks in advance for sharing your knowledge to a newbie like me.

    Saging,
    Hmmm.  It seems a bit odd to be creating a 'forecasting-of-material-procurement' tool, when SAP has so many already built in, either within ERP or within APO.  Oh well, I am sure there must be a good reason.
    I have seen from our systems that most loads come from APO going to BI. Is it always that way?
    BI type data can come from any source.  The most common BI solutions I have seen is where BI data are extracted from the main ERP.  However, the beauty of BI is that it doesn't care, SAP builds in functionality to get data from anywhere.
    Are data from ECC considered as well?
    They can be if you design it so.
    You should be aware that most data existing in ERP that are relevant for material planning also usually exist in APO.  The Core Interface between ERP and APO is normally set up to natively replicate substantial quantities of Master data and also transactional data.  It may be that in your business environment, you really don't need to connect to anything other than APO.  However, this is not a limitation of BI, it is just smart programming to try to minimize the number of sources of your data.
    Best Regards,
    DB49

  • BAPI Function Module for SCM APO Tcode /SAPAPO/AC42

    Hi,
      I want to know the BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
       This BAPI FM should return the column values "Remaining Prod Alloc"  and "Incoming Order Quantity" when we give
       below details as inputs for the Tcode /SAPAPO/AC42
            Product Allocation Group
            Product
            Allocation Procedure
            prod Alloc step
            Product Alloc Object (Characteristics of Product Alloc Group)
            Plant (Characteristics of Product Alloc Group)
            Customer Group 5 (Characteristics of Product Alloc Group)
        Reward points if helpful.
    Thanks,
    Mich

    Hi,
    You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
    ProductAllocationAPO.DataInsert
    Interface to Import Product Allocation Data  Functionality
    This method is used to adopt data from OLTP systems for product allocation in the global availability check.
    You can do the following using the method:
    Adopt new data
    You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
    Change existing data
    You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
    The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
    Prerequisite
    To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
    Regards
    Vinod

  • BAPI Function Module for SCM APO Trans code /SAPAPO/AC42

    Hi,
       Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
       This BAPI FM should return the column values "Remaining Prod Alloc"  and "Incoming Order Quantity" when we give
       below details as inputs for the Tcode /SAPAPO/AC42
            Product Allocation Group
            Product
            Allocation Procedure
            prod Alloc step
            Product Alloc Object (Characteristics of Product Alloc Group)
            Plant (Characteristics of Product Alloc Group)
            Customer Group 5 (Characteristics of Product Alloc Group)
        Reward points if helpful.
    Thanks,
    Mich

    Hi,
    You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
    ProductAllocationAPO.DataInsert
    Interface to Import Product Allocation Data  Functionality
    This method is used to adopt data from OLTP systems for product allocation in the global availability check.
    You can do the following using the method:
    Adopt new data
    You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
    Change existing data
    You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
    The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
    Prerequisite
    To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
    Regards
    Vinod

  • R12 or Latest Technical  Reference Manual

    Hi Does anybody have Technical Reference Manual for Release 12 or the latest version of R12.I'm not able to find that in the metalink.I'm looking for Products ASCP GOP & CP
    Thanks & Regards
    Bhubalan Mani
    Edited by: Bhubalan Mani on Jul 22, 2010 8:05 PM

    Try http://etrm.oracle.com
    HTH
    Srini

  • SCM, APO and EWM

    Hi Experts,
    My apology if I'm posting this on the wrong category.
    I'd like to ask for SAP SCM (APO, EWM etc) if its a separate installation like with SAP ECC or it can be added as one of the components for SAP ECC?
    Cheers,
    R-jay

    Hi R-Jay,
    SAP SCM Applications are separate installations like SAP ECC or SAP CRM  software applications .
    Within SAP SCM also there are separate licensing requirements for APO, EWM, EM, SNC applications.
    For SAP EWM and EM, SAP ECC add on option is available,  however,  the licenses for  EWM, EM will be seperate than thoseof ECC.
    Regards
    Datta

  • Multiple Clients in SCM-APO?

    In a Development SCM-APO 5.0 environment, can we have multiple clients?  For instance, can we have a unit test client(with master and transactional data), a security client, and a golden configuration client.
    We have heard that there may be issues with having more than one client, but we are not sure if this is correct.  Our SCM-APO unit test client would be the only one that is connected to a BW (3.5) Development client and a R/3 (4.7) Development client.  The security and golden config client would not be connected to external systems.  Is this landscape possible and supported by SAP?

    I do not have a good answer but it seems APO-DP uses BW as Data Mart which results in some restriction in using multiple client. See SAP Note 522569 for details. Moreover in the Multi-client Whitepaper (attached to SAP Note 31557) the table in page 23 mentions Multi-client Status for APO with DP : Not OK and APO w/o DP : Restricted OK.
    Hope this is of some help.
    somnath

  • CRM - SCM-APO integration - TPOP

    Hi all, i have TPOP (Third Party Order Processing) scenario which involves CRM and APO integration. I create a sales order and this triggers a planned purchase order in SCM APO. How do i find that planned purchase order in SCM APO?

    Hi Animesh
    If you do not know what the order number that was created then you can go into the product view to find the order. As you are aware this transaction is by product (also enter location and version 000). Press enter and do not press the Create Order button. This takes you into a screen where all elements for the product are shown. You will need to know what date the order was created on then you can find it. Since you are looking for planned purchase orders these should come into APO as planned requisitions in which case your order should appear with either 'PurRqs' or 'SNP: PReq' in the Category column. I believe if you double click into the order you can see all of the products.
    If you do know the order number (maybe sales order is updated in CRM?) then use transaction /sapapo/rrp2.
    Be sure that you are looking for purchase orders and not planned orders - the method to view them will be the same just different categories in the categories column.
    Regards
    Andy

Maybe you are looking for