Scm dbm error
hai every one,
We have installed scm 5.0 box, We have an issue in configuration of live cache, we have followed the SAP live cache post installation steps till config of LCA ,LDA and LEA.Then we click on the live cache monitoring for LCA,we got a window Error DBMCLI_COMMAND_EXECUTE_ERROR when starting and error code is 29464.
With regards
shiva
Please see if this OSS Note helps
Note 147927 - LC 7.1.3 Build > 5: DBMCLI_COMMAND_EXECUTE_ERROR
Similar Messages
-
DBM Error return code -11 in LC10 Administration in SCM System Live Cache
Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
VaibhavHello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina -
Live Cache Monitoring. DBM_CONNECT DBM Error
Hi Gurus,
I have Installed TM7.0 system which is on NW7.0 with EHP1 on windows server2003 and Oracle DB. i have also installed SCM optimizer.
after i installed Live Cache, in transaction LC10 i have maintained the data in integration tab. When i click the 'liveCache : monitoring' tab i get the following error.
Name and Server : TM7 - CTSGVCSAPBL07
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -2
Error Message : ERR_USRFAIL: User authorization failed#
This implies that the connectivity to the MaxDB database is giving authoization error.
The user with which i have logged in(SAP logon) has the following roles -
SAP_LCA_ALL
SAP_BC_LVC_SUPERUSER
Thanks in advance
SriramHi,
please take a look at SAP note 990602, specifically point 11; use transaction DB59 to check the connection to your liveCache instance.
From the error message you receive, it seems likely that the integration data (user/password combination) for your liveCache instance is incorrect.
Regards,
Roland -
Live Cache Failed (DBM error)
Hi,
I am getting following error while starting live cache(LC10)
"Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system"
Server: system
Users: SAPUSER
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LC1 - system
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LC1 restart -uDBM , -uDBA , -uSQL ,
liveCache LC1 (restart)
The liveCache state is OFFLINE
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
ERROR : restart not possible [please check knldiag!!]
ERROR : liveCache LC1 not started (see "d:\sapdb\data\wrk\LC1\lcinit.log")
In Transaction DB59 i tried connection test "Connect. test with "native SQL" ( LCA ) unsuccesful"
how to restart Live Cache again? what will be the problem?
regards
ThennarasuHello,
what's wrong with the hint you already got?
> ERROR : restart not possible [please check knldiag!!]
Check the knldiag and then we might be able to do something about this issue.
regards,
Lars -
Hi SAP Friends,
Iam using a SAP SCM IDES version 5.0. while posting transactions in SCM system the system dose not responce after 2 hours of starting the management Console. When i had a look at the management console the first instance status was ended and the message server was disconnected. When i shut down and restart the system SCM works fine for another 2 hour. This was happning for the past 2 days. Today when we tryed to run the console the following error poped up when i clicked on the Process List.
Getprocesslist failed: FFFFFFF
End of file or no input: "Unknown error"
All the status shows as Ended and the message server gets disconnected.
In the Syslog the following warning message is shown:
SAP-Basis System: Stop Msg Server, PID 1304
Avaiting responce from the SAP Gurus out there.
Thanks in advance.
Regards,
Sivabalan.K.S.Solved by setting up the back up for Live Cache
-
Hi,
Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Thanks,
Chetan> Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
Hmm... that is usually not the way it should work - I assume you're employing a third party backup tool here?
If not, than you definitively shouldn't create the log backup directly to tape.
Instead you should use the AUTOLOG backup to the filesystem and afterwards archive the backups to the tape.
> ERR
> -24988,ERR_SQL: SQL error
> -104,DBM command impossible at this time
Well, it means what it says: for some reason (e.g. there is already a backup running) you cannot start the backup right now.
For more detailed answers we need to see the log files of the database.
> Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Hmm... what has your liveCache to do with your business (month?) end closing??
Anyhow, if something is important1, critical2 or urgent3 then the forum might not be the place to go.
In such cases always open a support message - there you've got guaranteed response times.
regards,
Lars
please don't blame me for adding the numbers to the three bad words above - this was the only way to get around the awkward content filtering of this forum
Edited by: Lars Breddemann on Sep 4, 2009 9:47 AM -
Hi
the SCM optimizer run is failing with the following error.
> sno_module.cpp(317) 'SnoModule' optimal solution found
<e> optsvr_rfcconnection.cpp(953) 'MsgMgr' <RFC> RfcCallReceive(RFC_HANDLE=1, func<152>=/SAPAPO/OPT_SVR_CALL) failed in thread#1108
RFC_RC (RFC_SYS_EXCEPTION) System exception raised, connection closed
RFC_ERROR_GROUP (RFC_ERROR_SYSTEM_FAILURE) e.g. SAP system exception raised
key=RFC_ERROR_SYSTEM_FAILURE
LOCATION SAP-Gateway on host / sapgw10
ERROR Conversation 9856256 not found
message=CPIC-CALL: 'CMRCV : rc=19
I checked the logs from gateway dev_rd, found the same error..
Please let me know how to troubleshoot. Thanks in advance.
Edited by: Kheer. on Nov 15, 2009 3:29 AM
Edited by: Kheer. on Nov 15, 2009 3:35 AM
Edited by: Kheer. on Nov 15, 2009 3:40 AMHi Kheer,
As per i know, there is NO standard function module or program by this name '/SAPAPO/OPT_SVR_CALL' in SCM system.
But anyways, you can check in your SCM systems but not in Optimizer.
Go to transaction - se37 & se38 for checking for both function module and programs respectively.
note - you may just put /sapapo* and press f4 to see the list of the function modules or programes in your system.
I hope this will help you in concluding the issue.
Regards
Sekhar -
hi
i am trying to create error log, but the results are not correct.
i am inserting emp records in emp2, i have check constraints salary greater than 5000 in emp2 table
SQL> insert into emp2 (id, name, sal) select id, name, sal from emp log errors into error_log_emp2;
i have created error_log_emp2 table by using dbms_errlog.create_error_log procedure.
but, in error_log_emp2 table only three records inserted instead of six records listed which violate check constraint, and no records inserted in emp2 which will not violate check constraint.
Please help with your suggestions on using error logging.....
SQL> select id, name, sal from emp where sal>4990;
ID NAME SAL
8 LAKSHMI 5000
9 HEMA 5000
10 CHANDRA 5000
11 KESHAVA 5000
12 GEETA 6000
101 JUNK 5000
SQL>select * from error_log_emp2;
"ORA-02290: check constraint (AMDB.CHECK_SAL) violated " I 8 LAKSHMI 5000
"ORA-02290: check constraint (AMDB.CHECK_SAL) violated" I 9 HEMA 5000
"ORA-02290: check constraint (AMDB.CHECK_SAL) violated" I 8 LAKSHMI 5000Use
log errors into error_log_emp2 reject limit unlimited;the default reject limit is 0, your code will error out when the first error occurs..
probably you are having 3 rows in error log table coz you ran the inser statements 3 times. Note taht, error logging (only the logging part) is autonomous and auto commiting.
Edited by: jeneesh on Nov 19, 2012 11:50 AM -
Dear Sir,
While doing the CCR Activity, I am getting an error "APO Indicator not active for the material in the plant" in R/3 Inbound.
Request you to please help me out getting the solution for this problem.
Thanks in advance,
Vinit P. Deshmukh.Hi
Can u please update what is the exact transaction for which you are doing CCR
If it is wrt to material, check whether MRP Type - whether some one changed from X0
If is wrt to Transaction data like SA, check the planning indicator
regards
Vijay -
Xcode 2.2 SCM/SVN error
Howdies,
I hope this is the right place to ask this type of question:
I'm trying to get Xcode to talk to a local stand along subversion server. The odd thing is that it never asks me the user name and password but does give an error message:
Authentication realm: <svn://localhost:3690> iBook Repository
Password for 'nathan':
Authentication realm: <svn://localhost:3690> iBook Repository
Username: svn: Commit failed (details follow):
And that's it.
I'm working from a project checked out from the command line.
How do I set the user name and password for Xcode to use? A property file perhaps?
Thanks for taking the time to read my question.Okay, the answer is no. My repos was just broken.
-
SAP SCM 2007 liveCache 7.7.0 Windows Server on x64 64bit ERROR
Hi All,
OS : windows 2003 server 64 bit,
DB : Oracle 10g
APP : IDES SCM 2007
Our Requirment is need to Install SCM 2007 with LiveCache, APO.
to Install SCM 2007.. We must need to have 2 DATABASES and 2 SID
1. One Oracle or SQL Database for SCM (one SID)
2. 2nd for ONly MaxDB Database for LiveCache (Another SID)
Can you please advice me.... here are the steps I done as of now.
oracle 10g Installation completed.
SCM IDES 2007 Installation Complted.
(At the time SCM Installtion its prompt me for SID's for 2 times..
I given Both SID Same (One for [SID-SCM]) and (Another for Live Cache[SID-SCM]) Then the Installation is successfully completed. but now when I run LC 10 is not working...
Name and Server : IE6 - XXXXXX
DBMRFC Funcation : DBM_CONNECT
ERROR : DBM ERROR
Return Code : -4
Error Message : database instance not found.
to over come from this issues do we need to Installl LIVECACHE SERVER SERVER ?
1. if we need to install livecache server.. I need to go for only for MAXDB.
2. In the MAXDB Instance I have to give the Instance name same as Live cache server SID ?
3. IF we need to Install livechache server, do we need to use SID same as SCM or different one?
4. SCM IDES and Live Cache is running one the same machine.
5. After this LiveCache server.. we need to Install livecache client also install... if the SCM IDES and Livecache running on same BOX and SAME OS.
can you help me on this.Hello,
-> As SAP customer you have the option to create the OSS ticket to the component BC-DB-LVC to get SAP support.
->
"1. if we need to install livecache server.. I need to go for only for MAXDB."
You need to install the liveCache server of the 7.7 version, as you are installing SCM 2007 with LiveCache, APO.
Please follow the liveCache server installation guide.
"2. In the MAXDB Instance I have to give the Instance name same as Live cache server SID ?"
How many MAXDB/liveCache database instances are you planning to install on the liveCache server?
"3. IF we need to Install livechache server, do we need to use SID same as SCM or different one?"
The liveCache SID for the SCM system need to be unique on the liveCache server, you have only one database instance MAXDB/liveCache with this name, also you checked the restrictions for the names at
http://maxdb.sap.com/doc/7_7/default.htm -> Glossary ->Database Name -> Conventions for Database Names
"4. SCM IDES and Live Cache is running one the same machine."
You could run SCM IDES and Live Cache on the same machine.
"5. After this LiveCache server.. we need to Install livecache client also install... if the SCM IDES and Livecache running on same BOX and SAME OS."
If the liveCache instance and application server are running on the same machine, you don't need to install the liveCache client software.
Please review the SAP notes::
822239 FAQ: MaxDB Interfaces
822271 FAQ: SAP MaxDB client software
-> Please update with output of the following commands:
dbmcli -s inst_enum
dbmcli -s db_enum
sdbregview -l
xinstinfo IE6
-> For SAP liveCache documentation see the SAP note 767598.
The documentation available at www.sdn.sap.com/irj/sdn/livecache
Thank you and best regards, Natalia Khlopina -
Dbms service startup error on Ep6sp2patch2, j2ee patch 23
hi,
I am getting below error while starting the state controller of j2ee in cluster env.
[DBMS]: Error during reorganization/defrag recovery
com.inqmy.services.dbms.server.interfaces.DatabaseException: ID3020:Error during reorganization/defrag recovery
ID000544: Error starting service dbms. DBMS Service not started properly due to: Error, while opening database
[ServiceManager]: ID000544: Error starting service dbms. DBMS Service not started properly due to: Error, while opening database
[Framework -> criticalShutdown] Service dbms startup error!
Any hints would be really helpful.
Note: I am starting the service manually(go.bat of state Controller)and not as NT service.Looks like a corrupt internal database
You could try (although there are no guarantees what so ever!)
Go to
c:\usr\sap\<PID>\j2ee\j2ee_01\cluster\<server which failed>\services\dbms\work
and do
1. Backup all files in here
2. Copy all the files from the last_backup folder(hopefully you will have this one under work) to the work folder overwriting the old files
3. Restart the portal
I've also heard of people copying between different app servers but would not recommend this
NOTE: If this is a production system, please contact SAP in order to make sure that you get the recommended workaround -
(SCM-APO ) - LiveCache error - tp error : operable program or batch file
Dear Gurus,
On one our APO systems, I cannot administer liveCache, using database connection LCA, LDA, or LEA. Using LCA as an example, with
tcode LC10> liveCache Monitoring, I get this error:
Name and Server : QDP - ntsapsc001
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: operable program or batch file
Using tcode /sapapo/om13, I get these results:
liveCache connection to LCA (GREEN)
liveCache Stat. from LCA ??? (RED)
liveCache Initialization 001 (RED)
Using tcode SE38> program RSLVCINIT > database connection LCA, I get this error:
Error in DBMSERVER or DBMCLI
What is wrong ?
Thanks and regards,
cjperk90In the syslog (tcode sm21), and on the NT server's syslog,
I also get these errors:
Database error -10709 at CON
> Connection failed (RTE:database not running)
Please advise.
Thanks,
cjperk90 -
Hi All,
We have installed live cache & SCM 7.0 in the same system & while opening LC10 it gives an error in DBMCLI or DBMSERVER.
But am able to execute DBMCLI commands , Both DB 59 & RSTPTEST throws an erron in tp call.
Connect. test with "dbmcli db_state" Unsuccessful
dbmcli_command_execute_error
Error! Connection failed to node CA-INTRIGO02 for database LC1:
tp error: tp=>sapparam: SAPSYSTEMNAME ne
External program terminated with exit code 2
. Connect. test with command mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : LC1 - CA-INTRIGO02
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: tp=>sapparam: SAPSYSTEMNAME ne
. Connect. test with session mode "dbmrfc db_state" Unsuccessful
dbm_execute_error
Name and Server : LC1 - CA-INTRIGO02
DBMRFC Function : DBM_EXECUTE
Command : db_state
Connect. test with "native SQL" ( LCA ) Successful
DB Connect Link to database failed
Offline Call connect failedHi,
Nope..the problem still persists .
The DB59 logs below
Connect. test with "dbmcli db_state" Unsuccessful
dbmcli_command_execute_error
Error! Connection failed to node CA-INTRIGO02 for database LC1:
tp error: tp=>sapparam: SAPSYSTEMNAME ne
External program terminated with exit code 2
Connect. test with command mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : LC1 - CA-INTRIGO02
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: tp=>sapparam: SAPSYSTEMNAME ne
Connect. test with session mode "dbmrfc db_state" Unsuccessful
dbm_execute_error
Name and Server : LC1 - CA-INTRIGO02
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -24941
Error Message : ERR_NEEDLOGON: DBM server logon required
Connect. test with "native SQL" ( LCA ) Successful
Thanks -
Hello Experts,
After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
Logical Command: DBMRFC
Parameter: exec_lcinit register
Name and Server : LCQ - dusepierp12
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit register
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LCQ register -uDBM , -uDBA , -uSQL ,
liveCache LCQ (register)
The liveCache state is ONLINE
DBMServer 7.6.04 Build 009-123-182-193
Creating liveCache application procedures
ERROR : liveCache LCQ not registered (see "s:\sapdb\data\wrk\LCQ\lcinit.log").
START *****************************
liveCache LCQ (register)
Thu 07/30/2009
10:26 PM
installation path = S:\sapdb\LCQ\db
OK
DBMServer 7.6.04 Build 009-123-182-193
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
Traceback----
Error----
sql.SQLError: [-4008] (at 1) Unknown user name/password combination
Traceback (most recent call last):
File "S:\sapdb\LCQ\db\env\lapps.py", line 38, in ?
connectAndInstall (install, install.__doc__)
File "S:\sapdb\LCQ\db\env\installib.py", line 398, in connectAndInstall
session = connect (options)
File "S:\sapdb\LCQ\db\env\installib.py", line 350, in connect
alterUserNotExclusive(options)
File "S:\sapdb\LCQ\db\env\installib.py", line 338, in alterUserNotExclusive
session.release()
AttributeError: 'NoneType' object has no attribute 'release'
ERROR : liveCache LCQ not registered
Thu 07/30/2009
10:26 PM
END ******************************
Many Thanks,
TIA,
NischNischal Mahakal wrote:>
> Hello Experts,
>
> After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
> -24964,ERR_EXECUTE: error in program execution
> 1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
> -
Traceback----
Hi there,
looks like you entered "DBADMIN" when you created the liveCache instance in DBMGUI as the DBM Operator.
For SAP installations, this user is always named "CONTROL".
So, drop the instance again, recreate it with "CONTROL" and re-do the recovery of the liveCache backup.
regards,
Lars
Maybe you are looking for
-
How do you get REAL fractions in Pages 5.2
I am pulling out what little hair I have left trying to figure out how to get REAL fractions (ala iWork 9) inserted into a Pages 5.2 document! All of the solutiions I have found on the net DON'T WORK for Pages 5.2! The "Character Viewer" built in to
-
W520 - now changes to "projector only" whenever display turns off in power save mode
I have my W520 in a dock with an external monitor. The display is configured to Extend - the external monitor is primary, and the desktop extends onto the W520 screen. I don't have a screen saver. I turn off the display after 30 minutes of inactivity
-
When and why to use performSelector - iOS
I have been trying to figure out why and how to use performSelector. I did come across https://developer.apple.com/library/mac/#documentation/Cocoa/Reference/Foundatio n/Protocols/NSObject_Protocol/Reference/NSObject.html However, I am not able to fu
-
Notes App Crashes when Update Teared-off iCloud Notes on iDevices
This is not a question, but a bug. After I tear-off a note (double-clicked the note from the list) from the Notes app with iCloud enabled, and then edit it on iPhone (iOS6.0.1), 2 problem occurred: 1. The updates will NOT show on the tear-off piece;
-
Why am I getting an error message whenever I try to use Firefox?
Firefox was working fine then all the sudden it stopped. Now whenever I click on Firefox to use the internet I get an error message "can't establish a connection". This happened on another computer then all the sudden it began working again. I need F