SCM Extended Manufacturing for Mill Products?

Hi SCM Experts,
Our customer ask me about  SCM Extended Manufacturing for Mill Products, i've just had some information via the link!
"http://www50.sap.com/businessmaps/96F6CB484C6E48709F6ACEA454A3962C.htm
So, Could you tell me more details about functionality or Sub-components (detail products) of "SCM Extended Manufacturing for Mill Products "
Thanks for your support,
Viettq.

Hi Viettq,
I hope the below link will give you full picture of your requirement
http://www.sap.com/industries/millproducts/cable_wire.epx
Please confirm.
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Correlated query to find cheapest manufacturer for a product

    Hi,
    I have a SQL Query that returns me:
    - the "product code" i must purchase,
    - the "quantity" to purchase for this product
    - and if it's in "promotion or not".
    Based on this result, i must to look at "manufacturer" table and find the cheapest "price" for each product to purchase and the quantity available at the manufacturer.
    If "quantity to order" (e.g. 20) is higher than "quantity available" (e.g. 12) at "cheapest manufacturer", i must order the missing quantity (8) to the next cheapest manufacturer.
    How can i do that ?
    thx

    ​Hi
    >>correlated query to find cheapest manufacturer for a product
    I have created two table [ProdTable] , [Product Code] to get the cheapeast manufacturer  for a product  which you can refer to .
    [Product Table]
    [Prod Table]
    select [ProdTable].[S_Prod_Code],Min([ProdTable].[Prod_Cost]) as MiniCost
    from [ProdTable] inner join [Product Table] on [ProdTable].[S_Prod_Code]=[Product Table].[Product Code]
    Where [Product Table].[Promotion]<>"YES"
    group by [ProdTable].[S_Prod_Code]
    Using the above query ,you can get the cheapest  cheapeast manufacturer  for a product , which the promotion is not YES
    >>for promotional products, i must firstly check if the cheapest manufacturer has enough prod in stock. If not, i order all the prod in stock the manufacturer has, and i must order to missing ones to the next cheapest manufacturer
    Are you looking for a select query or an update to the table or form design ?Can you separate your business rules with the technolege ?  So more people could understand your issues well to give you more help.
    Thanks for your understanding
    Best Regards
    Lan
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error message opening PS CS3 Extended : "Licensing for this product has stopped working"

    I used Migration Assistant to transfer data from my (very) old Mac OS X to a new iMac OS X Yosemite. Before doing so, I uninstalled my (also very old) PS CS3 Extended. When I tried to open PS on the new Mac it asked me to download Java, which I did. But now when trying to open PS again the error message is "Licensing for this product has stopped working". I purchased it about 5 years ago in a box which I no longer have, but I do have the complete 24 digit serial number. How best do I remedy this?

    Download the Photoshop CS3 installer Max or PC here. You should be good to go.
    Download CS3 products

  • What are the solutions offered to handle length based or mill products?

    We are on 11.5.10. Current version treats beams as each, we have 30 feet beams, 20 feet beams etc.
    We do not want to set-up different items for each length of beam.
    We need ability to tell we have 10 pieces of 26 feet beams in inventory.
    Currently we can only tell we have 260 feet of beams.
    Current solution treats it discretley. We need ability to sell length based items, receive length based items, do inventory management based on length based items.
    a) What are the solutions offered by Oracle in latest releases for Length based products or for Mill products.
    b) If there are any solutions offered by Oracle to handle length based or mill products, can these be back ported to Oracle 11.5.10?

    At the time of entering orders, item inquiry, receiving, inventory transfers etc...You can enter the lot attributes during receiving because you create a new lot number.
    On Item onhand inquiry, you can enter lot context and lot attributes to limit your search to specific lots.
    You may have to write personalizations on other screens.
    Hope this helps,
    Sandeep Gandhi

  • Any solutions offered by Oracle to handle length based or mill products?

    We are on 11.5.10. Current version treats beams as each, we have 30 feet beams, 20 feet beams etc.
    We do not want to set-up different items for each length of beam.
    We need ability to tell we have 10 pieces of 26 feet beams in inventory.
    Currently we can only tell we have 260 feet of beams.
    Current solution treats it discretley. We need ability to sell length based items, receive length based items, do inventory management based on length based items.
    a) What are the solutions offered by Oracle in latest releases for Length based products or for Mill products.
    b) If there are any solutions offered by Oracle to handle length based or mill products, can these be back ported to Oracle 11.5.10?

    Please do not create duplicate posts across the forums -- What are the solutions offered to handle length based or mill products?

  • IS-Mill Product.

    Dear Guru,
                           What is mean by IS - Mill Product? what is purpose of IS-Mill in SAP plz give me sutiable example releated to this
    IS-Mill? What is need for this customizing suppose i am not customizing then what happen?
    Regs
    Ravi

    Ravi,
    General Info about Mill Products
    http://www.sap.com/usa/industries/millproducts/index.epx
    Solution Maps for Mill Products
    http://www.sap.com/solutions/businessmaps/F5AE392781A542FABEC2728D9B2E4E56/index.epx
    I haven't seen a standalone 'Best Practices' for Mill products since 4.6C.  However, there are some Best practices that use the Mill Products solution.  In these, you can find configuration guides. Look at
    Building Materials
    http://help.sap.com/bp_bm604/BM_US/html/index.htm
    Fabricated Metals
    http://help.sap.com/bp_fm604/FM_US/html/index.htm
    for a start
    Regards,
    DB49

  • SAP Mill Products!

    Hello all,
    I am starting a upgrade from 4.6c CS to ECC 6.0 DIMP. Does anyone have any documentation about ECC 6.0 DIMP?
    Thanks in advance,
    Adelmo R Silva

    Hi,
    [SAP ECC-DIMP and SAP DBM|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cee822-8d16-2a10-9b99-83e017ac1952]
    [Security Guide for SAP for Mill Products|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/005c36a1-9516-2a10-34a7-e1ca04acf762]
    [SAP Industry Solution - SAP for Aerospace and Defense|help.sap.com/content/documentation/industry/docu_is_aero.htm]
    [SAP ECC DIMP 5.0|help.sap.com/content/documentation/industry/index.htm]
    Reward if helpful.
    Thanks and Regards,
    Naveen Dasari.

  • Mill products to SCM5.0

    Hi All,
             How to transfer ATP Customizing data into SCM 5.0 from Mill products?
             Using CFM1 and CFM2. Please give me detail.It is urgent Issue.
             Please help me.
    Thank you,
    Durga

    Hello,
    In DIMP (SAP R/3 - Mill Product system), You must have activated the function in Customizing of Sales and Distribution at Basic Functions --> Availability Check and Transfer of Requirements --> Availability Check
    Once it is doen in CFM1 transaction
    In the Material Independent Objects Area of CFM1 select the ATP Customizing.
    It is one time activity.
    Once it is selected using Core Interface functionality ATP Customization will get transfer to SCM 5.0.
    We are assuming here that basic required setting of the Core Interface has been done in R/3 as well as in SCM 5.0.

  • Adobe Photoshop CS4 Extended, owned for ages, licensing for this product has expired? Was using it two months ago.

    Hello,
    I have been trying to get Adobe's help for over a month now. I've been on the phone twice to them, opened up three seperate cases and still arrived at no solution. I was bought Photoshop CS4 Extended awhile ago and use it for my studies (I'm an art student). Two months ago my harddrive on my computer failed and I had to have a new laptop. I went to reinstall Photoshop and "Licensing for this product has expired" comes up. I've uninstalled, inreinstalled many times and used Microsoft Fix It Programme for uninstalling to make sure all the files are gone.
    Surfing the forums I learned that there should be a folder with back up and Adobe PCD but I don't have that folder at all. The serial number I use is my original serial number that I know works and adobe have even said it's a technical error. What do I do? College starts again in two weeks and I don't have the programme I use for it!

    Try the License Repair Tool Adobe - Adobe Licensing Repair Tool
    Other suggestions if this doesn't work: Error "Licensing has stopped working" | Windows
    Also if you must uninstall, use the Adobe CS Cleaner tool, not the Microsoft one. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • After many months of non-use, when I opened Photoshop CS4 Extended, I got an error message 148.3.  "Licensing for this product has stopped working."  I need help, please.

    After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3.  "Licensing for this product has stopped working."  I need help, please.

    Error "Licensing has stopped working" | Windows
    Error "Licensing has stopped working" | Mac OS
    Mylenium

  • How to findout for which product category extended classic is activated?

    Dear experts,
    How to find out for which product category extended classic is activated? I am working in a test system. In spro settings, Cross aplication basic settings -> activate extended classic is unticked.
    I see, the system allows me to create a Extended classic PO against a product category 001.
    The product category has same ECC backend  system as target and source system.
    Is there any BADI implementation?
    regards,
    Ranjan

    Hi
    ECS - flag activated - means Extended classic scenario.
    target determine badi - helps to create a PO in desired place.
    source system and tatget system logical entry sjhown means
    PRODUCT CATEGORY - created in Backend system and follow on docuemnts also created in ECC system - so it could be Classic .
    as jay said determine log system badi used for DECOUPLE scenario ( Classic as well as ECS) .
    some times unless we study the system in depth, hart to findout what is exact techniacl scenario.
    or you can find out what type of POs are in BBP_PD for all PO means ECS.
    This SRM tools can be used for many purposes.
    some customers uses for Supplier registration only,
    some one is using for only Bid invitation and Bid and selecting the vendor only
    some one use for all non stock procurment only.
    some one use for only free text - ....
    taste vary in all business.
    you must give more details like what are the Business docuement s are created in SRM
    Muthu

  • Content for  SAP Mill Products

    Hi there
    does anybody know as of when SAP plans to have a Business Content for SAP Mill Products available?
    Thanks and regards
    Gerald

    There is none and nothing planned yet by SAP...

  • Implementation content for MTS for consumer products in SCM

    Dear friends,
      I am trying to find business scenario in business process repository (BPR) for consumer products for MTS  from SCM 5.0 (Supply chain mgmt) .
    I could not find that option in solution manager 4.0. My scenario is very narrow to consumer products for MTS scenario. How to get it?
    If any latest implementation content CD needs to be downloaded from service market place.
    My i check system status my implementation content level is :
    ST_ICO:
    Release 150_700
    Level:0006
    Highest support package:SAPK-15076INSTPL
    Please guide me.
    Thanks
    Senthil

    Hi Dolores,
        In Solar01, In "structure"tab, under secnario name, if i press F4, i am getting
    SAP for consumer products. Under this i am having the following:
    1.Brand management
    2.DSD paperbased
    3.Global data synchronization
    4.Mobile DSD order to cash
    5.Mobile DSD Van sales
    <b>6.Responsive replenishment</b>--- Under this node i am having SAP ECC 6.0 & SCM 5.0, R/3 47 X 200 & SCM 4.1
    7. Trade promotion management
    My support pack level are:
    ST-ICO-150_700-<b>0006</b>-SAPK-15076INSTPL
    But what u told as latest is level 0007. What we have is 0006. How to upgrade the patch level?
    Senthil

  • ECC WMS vs  Decentralized-WMS vs  SCM - Extended-WMS.  Confusing SAP Strat

    Have a Question ... pertaining to SCM-EWM = Extended Warehouse Management Functionality in SCM.
    I am raising this under SCM out of not sure which Forum this belongs to.
    I knew  WMS  Functionality that is part of erstwhile  R3 4.6, 4.7 and now  ECC 6  Releases.
    Back in 2003-2004 also came  "Decentralized WMS" which was the same thing, but WMS implemented
    on a Separate Server integrated to R3 via IDOCs/BDOCs.   It had additional functionality of  TRM (Task & Resource Mngt)
    which I know as my team has implemented in my earlier job as SCM Manager.   At that time there was no WMS inside of  SCM  (primarily APO).
    I am now quite confused with the  "Extended WM" functionality that has come as part of  SCM  along with APO.
    -  What is the reason for coining EWM ?  Architecture seems similar to D-WMS.   Is this meant to be a 'Replacement' for D-WMS  ?  
    -  I am reading this EWM having functionality similar to  D-WMS  (eg : TRM, Cross Docking, RFID) ... so it
       appears to be the same ... except now I am reading it has functionality called  'Slotting', 'Rearrangement', 
    'Transportation Cross Docking",  "EH&S Integration" ... all honestly very confusing to me.
    -  Is it that SAP will now do all the Latest Developments around WM only in the  "EWM" module & slowly phase out WMS in ECC ?
    Thought someone might know.  This confuses me a lot & I as Head SCM am unable to give the Right Opinion to our Customers on where to head for Warehouse Management.
    Regards,
    Ambrish Mathur

    Thanks for responding. But please bear with me for the confusion that still exists.
    If I am looking to recommend to a Large Customer who is in Manufacturing or Consumer Products or Automotive/Service Parts or Pharmaceutical Domain who typically Manufacture Finished Goods Inhouse and then Distribute it from Mfg. Plants to Regional Warehouses to Local Warehouses in a Country or across countries to sell to some Distributor or Retail Store for selling it to the Consumers. In such an Environment most of the Warehouses need to be WMS Managed - particularly big ones where RF Automation is also needed. Some even track Handling Units and need to Track Plant Batches so usually Implement HUM / SUM and Batch Management along with WMS to allow Pallet Tracking.
    If I were to recommend to such customers which WMS to choose for their SAP Landscape, it is a Confusion of Giant Proportions esp. when deciding between Decentralized WMS Server (i.e : WMS not in ECC but in a separate R/3 which was primarily given by SAP to avoid Performance Issues in the Core Operations in ECC - Batch Management, HUM & WMS can be very Performance Intensive) or use the SCM-EWM Functionality. I want to give a Recommendation that is Futuristic. Why does SAP need to keep both - D-WMS as well as SCM-EWM ?
    Bear in mind that EWM is different in Terminologies from D-WMS or ECC-WMS in the sense that the "Transfer Orders" in ECC or D-WMS and they are called as "Warehouse Orders" in SCM-EWM so have different SAP Trainings . In both 'Deliveries' for Sales/POs/STOs get "Distributed" from the Executional ECC System to the EWM/D-WM system to manage Warehouse Picking, Putaway & eventually GI / GR. D-WMS exchanges information with Central ECC Orders via Middleware which is IDOC/BDOC based while I am not sure if EWM uses CIF of SCM or has a different Interface with ECC.
    D-WMS & SCM-EWM both run in a Decentralized Fashion to take care of Performance Issues with implementing WMS in the Integrated ECC Environment which I do not recommend for Companies wanting to implement a Lot of WMS.
    So the Confusion very much exists between what to recommend between D-WMS & SCM-EWM to a Customer like above with a Futuristic Outlook in mind. It does not make sense for SAP to keep both.
    What do you recommend for above-like Customers ?
    Where do SCM-EWM Trainings happen (seem to be still not common) ... can you refer me ? I cannot see them in the India/Asia SAP Training syllabus.
    I want expert help to make a recommendation.
    Regards,
    Ambrish Mathur

  • Purchasing an extended warranty for the Sealed Battery

    Hi,
    I purchased an open box Lenovo X1 which has 2yrs onsite warranty remaining. I am now trying to purchase an extended warranty for the sealed battery unit but not sure how to proceed.
    I have found the product 04W7993 which sounds like the right item but not sure if it would apply to my machine.
    Can anyone confirm if this warranty product could be used to extend the warranty for my laptop? Even though it was open box, the cycle count was only 1 and the battery still has 100% of manufacturer capacity reported by the Power Manager.
    I have tried ringing Lenovo Warranty services and the Lenovo UK sales line but neither could help me.
    Cheers!
    Solved!
    Go to Solution.

    The 1294 system has a standard 3 year on-site warranty, the following are the options available;
    The problem for you may be that the accidental damage cover needs to be puchased, I believe, within 90 days of purchasing the system.  As you purchased an "open box" system I'm not sure if this is still possible, at best ask the shop where you purchased it;  if they had purchased it as a demo-system it should be possible for you to purchase both.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for