Scm:Logical system Name is changed. cannot access BW system.

Hi,
plz help me to solve thi problem.
SCM : Logical system Name is changed. cannot access BW system. system throw an error "Logical System has changed".

Hi Raj,
We can create the Logical system name in SALE or BD54 and we can assign the same logical system name in SCC4 for that particular Client.
If you want to change the logical system name after a client copy or System copy. Use BDLS.
Thanks,
Pundari

Similar Messages

"Site System Status Summarizer still cannot access storage object" after DB Move

After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
https://support.microsoft.com/en-us/kb/2709082
Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
Solution: Investigate and correct any problems on your network.
Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
Possible cause: You accidentally deleted the storage object or took the storage object out of service.
Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
occurs properly.
The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
to OK, providing that the storage object has sufficient free space.
I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

Was a site reset performed at all yet? This has to be done.
Torsten Meringer | http://www.mssccmfaq.de
Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

System name just changed!

Hello,
The name of my machine is "Mac_Pro". In Finder the name was the first item in the "Devices" list right before my hard drives.
Just today I noticed it now says "Mac_Pro (2)"
Has anyone else experienced this?

That implies that you're on network and another machine is using that name. Disconnect from the network, restart the machine, and use System Preferences->Sharing and change the computer's name.

My Logic file name length changed

For some reason, Logic started limiting my file name lengths to 31 characters. This was never an issue before. I could always use much longer names. About a week ago, for no apparent reason, it started limiting the length and truncating the names to only 31 characters. Anyone know if this is a bug or is there a setting somewhere that i don't know about. I'm on OSX 10.6.8. There is no problem with creating long file names outside of Logic 9.0.0

This has always been so in Logic. It never suddenly "started"...
But it was fixed in version 9.1.0, which came out
almost three years ago
and is a free update for every LP 9 owner...
You really should update, there's no reason not to. If you're on a PPC (G4 or G5), you can only go to 9.0.2 (still worth it), if on an Intel Mac (2006 and later), you can go to 9.1.8; this will improve things for you, and also end the 31 charachter limit, which was an atavism.

There is an app on my iPhone 5 that downloaded itself, it has no name and I cannot access the app or delete it, what is it?, There is an app on my iPhone 5 that downloaded itself, it has no name and I cannot access the app or delete it, what is it?

What can I do? I don't want to lose all my stuff either

It's completely situational. Without being able to directly compare the "scratch" on the original poster's iPhone with your iPhone, what gaamcc had happen could not be extrapolated to guess what Apple may do in your situation. It will depend entirely on what the Apple technician diagnoses after examining your iPhone. He/she may decide that any damage is strictly cosmetic and didn't have any connection with the problem you're taking your iPhone in for, or he/she may diagnose the problem as stemming from user damage. You'll just have to see when you go to the Apple Store.
Regards.

Logical system name changes

All,
Has anyone faced a scenario where you need to change the logical name for any SAP system?
For instance:
System      Logical Name                                                    System      Logical name B
BW                      A                     system is pointing to            ECC                  B
ECC will be upgraded and system name will changed to C
Is that possible? If so do you forsee any issues? Can we switch ECC B to ECC C with no issues?
I appreciate any help.
Regards

Hello Mike,
please elaborate a little more your inquiry. Are you talking about the ALE logical name changing? For this, please check the following notes:
#544509 ALE: Converting the name of the "logical system"
#121163 UTI: Logical System names
If you're referring to a domain name changing (like a Windows domain name change) or a hostname change, please refer to the following notes:
#96317:   Host names during R/3 upgrade, tips & tricks
#1275273: Hostname change on 7.10/7.11 java stacks
#757692: Changing the hostname for J2EE Engine 6.40/7.0 installation
#8307:    Changing host name on R/3 host: What do you do?
#1070561: SMD: Best practice for planned domain name changes
and on the following SDN threads:
/message/9196590#9196590 [original link is broken]
Re: Domain name change
Re: Change the Domain Controller
How to change hostname
Change Domain Controller
Or, lastly, you're talking about a SID change? On this case, you must perform a system copy to change de SID, please refer to the following note:
#11692: Renaming the system ID
(Sorry for the long and generic answer)
I hope this information helps.
Best regards,
Tomas Black

Logical system names after system copy

Hi!
I installed a new SAP system via System Copy (SAPINST) approach.
As a consequence the old logical system names have been copied.
Question:
What is the appropriate approach (tcode, report) to change the logical system names of each clients of SAP system?
Thank you very much!
regards
Jürgen

Logical System Names
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
In BW, you make the settings for the logical system names in the BW Customizing Implementation Guide under Business Information Warehouse ® Connections to other Systems ® General Connection Settings. In the source system, you make the settings for the logical system in the Implementation Guide under Cross Application Components ® Distribution (ALE) ® Basic Settings.
Note SR047 lists names that cannot be given to BW systems, because they are reserved for internal use.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: .

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the System Landscape Directory, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Change Receiving System Name in BD64

Hi folks,
 We have our production instance and QA instance; we have copied all data from Production to QA ENV (Client Copy). After that when I login in to QA system I saw in BD64 all the system pointing to receiving production system. I ran BDLS ( transaction ) which convert production logical system name to QA logical system name in tables and as well as in SCC4 transaction.
I again went to BD64 and I noticed after running BDLS my production system name replace to QA system name. But Receiving systems names are still pointing to production systems. I know that BDLS just change the sending system logical name not receiving.
My question is that how I can change or modify the receiving system production names to testing name. Is there any way or program?
I try to change the receiving system name but its not letting me change. You guys have any idea how to change the receiving system production name to test name.
I dont want to create all distribution model names with test systems as I have 30 distribution models and client copy is keep on going after every 1 or 2 months.
Please help me in this regards.
Thanks

The OSS notes just tell about the BDLS. I already done with BDLS Scenarios is like that say we have one distribution model name in Production
Model name = ZXYZ
(Sender system) Production system name = PRD_123
(Receiving production System in UK) = PRD_UK
These above are the setting for Production client.
We copy data from Production to Quality, so its copy all the data and Distribution name in QA ENV
So now my QA looks like
Model name = ZXYZ
Sender system) Production system name = PRD_123
Receiving production System in UK) = PRD_UK
After that I ran T-code BDLS and give logical system name = QA_123, then when I go back to BD64 the model is looks like following
Model name = ZXYZ
Sender system) Production system name = QA_123
Receiving production System in UK) = PRD_UK 
But PRD_UK isnt change because its the production system for receiving one , so Now I need to modify PRD_UK to QA_UK in BD64 , How Ill do it ?
I am trying to change receiving system but it doesnt allowing me.
I hope, now I made my self more clear.
Thanks in Advanced.
Bye
Message was edited by: Suleman Javed

Logical System Name is defined for which type of Business Sytem

hi
Can some one helps me on this question and explaination.
Logical System Name is defined for which type of Business Sytem ?
a.Third Party
b.Web AS java
c.WebAs abap
d.Standalone java
Thanks
Chandra

Hi ,
Logical System Name is defined for the Business System type WebAS ABAP.
It is used in ALE scenarios when exchanging IDOCs between the particular system and XI. The IDOC adapter will pick up the information from the SLD and it can then be used in the configuration in the Communication Channel (Adapter Specific Identifiers).
Refer to this How-To Guide for more info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Regards
Manish

Hello,i have changed the access of library and system files in macintosh HD through get info option.i changed the access to write only access for library and system files to no access for everyone.then mac stopped working..nothing opening now.

hello
i have changed the access of library to WRITE ONLY and also i changed the access of system files to NO ACCESS FOR ANYONE in macintosh HD.then,suddenly it stopped working.i tried it shut down.then it didnot shut down.then i pressed ctrl+command+power button.then it was shut down.
NOW, nothing is opening in macbook pro.it is opening and only apple logo is shown.what should i do now.i knew nothing in mac.please help me.operating system is 10.7

hello CT,
it showed
permissions differ on library: should be drwxr-xr-r
repaired "library"
permissions differ on system: sholud be should be drwxr-xr-r;they are d-wx-----------
repaired "systems"
like this many steps occured.
then next step is permissions repair complete.

Change ucs FI system name

Is it possible to change the already deployed system name on a paired cluster of 6248up fi's? Firmware is 2.2 3b...
Thanks

According to the config guide, this is possible.
F241-POD-1-UCS-1-A# scope system
F241-POD-1-UCS-1-A /system # set
F241-POD-1-UCS-1-A /system # set name niles
Warning: System name modification changes FC zone name and redeploys them non-disruptively
F241-POD-1-UCS-1-A /system* # commit-buffer
F241-POD-1-UCS-1-A /system #
niles-A /system #
niles-A /system # set name F241-POD-1-UCS-1
Warning: System name modification changes FC zone name and redeploys them non-disruptively
niles-A /system* # commit-buffer
F241-POD-1-UCS-1-A /system #
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0101.html#task_4F5115C9511C4870A30B890BF0EEFC78
HTH,
/niles

Cannot access common websites security certificate not trusted

I am unable to get to many frequently accessed websites from either Chrome or Safari due to Security Certificate Trust issues. I have been attempting to access Paypal all afternoon without success, as there is no "Proceed anyway" button. I was only able to reach this forum by selecting "Proceed anyway"(!) Other machines on my local network accessing the web via UVerse are not having difficulties, so it seems to be Mavericks specific.

This solved my problem:
https://discussions.apple.com/message/18508863#18508863
I solved this on my wife's computer by resetting the security certificate settings. This might help others:
Close all windows.
Keychain Access -> click on System Roots on the left, and then click on Certifcates on the bottom left.
Check to see if any of the certificates on the right have the blue "+" symbol - this means they have custom trust settings.
There is a bug in changing the policies, so you'll have to change them via the method below. Changing them just by changing the access to "system defaults" doesn't seem to save. The method below worked for me.
Double-click on each certificate with the custom setting (blue "+"), expand the section labled "trust". Change the "Secure Sockets Layer (SSL)" setting to "no value specified". Close window - you should be prompted for the password. Double-click on the certificate again, expand trust, change the "When using this certificate" setting to "Use System Defaults". Close window, and re-enter password.
If you didn't re-enter your password upon closing the window, the setting didn't take. The blue "+" should disappear after a few seconds when it's set back to default. Once all of the certificates are changed back to default, restart Safari.
This solved all of the problems for my wife's computer with these issues and OSX 10.7.4
Message was edited by: Barry Stock

Scm:Logical system Name is changed. cannot access BW system.

Similar Messages

Maybe you are looking for