SCM / PI Client Copy
Does anyone have experience not using the preconfigured client (001) in PI or SCM? We've copied those to 010 to match the productive client number of the rest of our systems.
Is this a bad idea? Should we stay with the preconfigured client? It does say in the installation post steps to do a client copy as well. Thank you.
~TJ
Hi TJ
No, think that is absolutely fine.
We have done that on numerous occasions.
Copying from client 001 is as good as working in 001.
The client copy should be fine for 010, which you have done.
Thanks
ABhi
Similar Messages
-
SCM client copy- Problem in CIF
Hi,
Recently we done client copy from production system to test system for both SCM as well as ecc system.
Problem is Master data is with logical system name of production system in APO.
We defined only logical system names for ECC and SCM client and kept name of buisness system group naming same as production to avoid this problem.
But there is problem in resoure external capacity logical system name is same as production only.
It is not feasible to delete all trasaction data and master data from APO and retransfer.
How can we change logical system name in resource?
I came to know that there isprogram to convert logical system name in customization as well as master data?
If this is true can you give name of program in APO as well as ECC if any?
Regards,
SantoshHi Santosh ,
Yes there is a report to change the logical system name from resource.
Report name is: /SAPAPO/CHANGE_BSG_RESOURCE for which the program need be included in your system as per code given in Note 924136 - Change of the LOGQS (BSG) for resources.
This will resolve your requirement...
Regards,
Digambar -
Client copy failed in SCM without livecache
Hi,
I am executing client copy on a SCM-EWM system with profile SAP_ALL. Client copy failed with error. How can I find what tables are not being copied?
The copy fail at post processing steps for this exit program "/SAPAPO/OM_CLNT_COPY_UPLOAD". My SCM system is not using LiveCache.
How do I confirm the copy is successful?
-Intan-Hi Deepak,
I found this is error in the client copy logs :
BEFORE_EXP_ADDRESS3 310 Q43C000004 320
Exit program BEFORE_EXP_ADDRESS3 successfully executed 10:12:57
Exit program BDC_DELETE_SESSION successfully executed 10:12:57
Error: Table /1CN/CPHPHU00001 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00001 does not exist.
Error: Table /1CN/CPHPHU00002 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00002 does not exist.
Error: Table /1CN/CPWPWO00001 error in DDIC - Check table with SE14 -
Hi,
I am doing remote client copy from (Development Server - ECD 140) to
our (Sandbox System - E6S 150) and the client copy keeps failing. I get
the below error message. Please advise what is the solution to this
problem? I am also copying the log file of the remote client copy below
Error Message:
Change documents are not copied
3 Tables cannot be converted
Critical differences: Missing tables: 125
Log file of remote client copy below
Target Client
150
Source RFC Dest.:
ECDCLNT140
System Name:
ECD
Client in Source System
140
Copy Type
Remote copy
Profile
SAP_ALL
Status
Cancelled. See Log
User
SAP*
Start on
08.05.2010 / 17:05:18
Last Entry on
08.05.2010 / 17:13:36
Last Action:
RFC DDIC System Comparison
Statistics for this Run
- No. of Tables
0 of 56508
- Copied Lines
0
Warnings and Errors
Table Name
Component
Package
/SAPTRX/EXT_AOT
Table Def. Missing Locally
/SAPTRX/EXT_EE
Table Def. Missing Locally
/SAPTRX/EXT_ETY
Table Def. Missing Locally
/SAPTRX/EXT_EVT
Table Def. Missing Locally
/SAPTRX/EXT_FLD
Table Def. Missing Locally
/SAPTRX/EXT_FLDS
Table Def. Missing Locally
/SAPTRX/EXT_FLDT
Table Def. Missing Locally
/SAPTRX/EXT_PAR
Table Def. Missing Locally
A850
Table Def. Missing Locally
A851
Table Def. Missing Locally
A852
Table Def. Missing Locally
A900
Table Def. Missing Locally
A901
SD-MD-CM
Different Field Names
A902
Table Def. Missing Locally
A903
Table Def. Missing Locally
A904
Table Def. Missing Locally
A909
Table Def. Missing Locally
A910
Table Def. Missing Locally
A911
Table Def. Missing Locally
A912
Table Def. Missing Locally
A933
Table Def. Missing Locally
A935
Table Def. Missing Locally
A942
Table Def. Missing Locally
A943
Table Def. Missing Locally
A944
Table Def. Missing Locally
A945
Table Def. Missing Locally
A946
Table Def. Missing Locally
A947
Table Def. Missing Locally
A948
Table Def. Missing Locally
A949
Table Def. Missing Locally
A952
Table Def. Missing Locally
A953
Table Def. Missing Locally
A954
Table Def. Missing Locally
A955
Table Def. Missing Locally
A956
Table Def. Missing Locally
A957
Table Def. Missing Locally
A958
Table Def. Missing Locally
A961
Table Def. Missing Locally
A962
Table Def. Missing Locally
A963
Table Def. Missing Locally
A964
Table Def. Missing Locally
A965
Table Def. Missing Locally
A966
Table Def. Missing Locally
A967
Table Def. Missing Locally
A981
Table Def. Missing Locally
A982
Table Def. Missing Locally
A983
Table Def. Missing Locally
A984
Table Def. Missing Locally
A985
Table Def. Missing Locally
A986
Table Def. Missing Locally
A987
Table Def. Missing Locally
A999
Table Def. Missing Locally
AFRU
PP-SFC-EXE-CON
Field missing locally
B901
Table Def. Missing Locally
B902
Table Def. Missing Locally
B903
Table Def. Missing Locally
B905
Table Def. Missing Locally
B906
Table Def. Missing Locally
B907
Table Def. Missing Locally
B950
Table Def. Missing Locally
B997
Table Def. Missing Locally
B998
Table Def. Missing Locally
B999
Table Def. Missing Locally
K9RECD1400004
Table Def. Missing Locally
KOTD601
Table Def. Missing Locally
KOTD602
Table Def. Missing Locally
KOTD603
Table Def. Missing Locally
KOTE901
Table Def. Missing Locally
KOTE902
Table Def. Missing Locally
LIKP
LE-SHP
Field missing locally
S001BIW1
LO-LIS-DC
Table has convertible differen
S001BIW2
LO-LIS-DC
Table has convertible differen
Z864DATA
Table Def. Missing Locally
Z864DIRECT
Table Def. Missing Locally
Z864INVOICETYPES
Table Def. Missing Locally
Z864ORDERTYPES
Table Def. Missing Locally
Z864RATES
Table Def. Missing Locally
Z864YENADJUST
Table Def. Missing Locally
ZBJOB_EMAIL
Table Def. Missing Locally
ZCSTMATNRLBL
Table Def. Missing Locally
ZCUSTJULIAN
Table Def. Missing Locally
ZFEDEX_COUNTRY
Table Def. Missing Locally
ZFEDEX_INBOUND
Table Def. Missing Locally
ZFEDEX_OUTBOUND
Table Def. Missing Locally
ZFI_EXCG_CURR
Table Def. Missing Locally
ZGBASE
Table Def. Missing Locally
ZGPRICE
Table Def. Missing Locally
ZHIPVALUES
Table Def. Missing Locally
ZIDOCDSS
Table Def. Missing Locally
ZLABOR_TIME
Table Def. Missing Locally
ZMACH_TIME
Table Def. Missing Locally
ZMM_GIMS_MTART
Table Def. Missing Locally
ZMM_WM_MAP
Table Def. Missing Locally
ZNGK_WORKFLOW
Table Def. Missing Locally
ZPPCRT
Table Def. Missing Locally
ZPPERRORLOG
Table Def. Missing Locally
ZPPEXPIRE
Table Def. Missing Locally
ZPPJOBMAP
Table Def. Missing Locally
ZPPNUM
Table Def. Missing Locally
ZPPWRKMAP
Table Def. Missing Locally
ZPP_COMP
Table Def. Missing Locally
ZPP_EXT_SOP
Table Def. Missing Locally
ZPP_MV_IN
Table Def. Missing Locally
ZPP_MV_OUT
Table Def. Missing Locally
ZPP_OPID_HU
Table Def. Missing Locally
ZPP_SOP_PBCR1
Table Def. Missing Locally
ZPP_SOP_PBCR3
Table Def. Missing Locally
ZPP_SOP_PBCR5
Table Def. Missing Locally
ZQM_CUST_BATCH
Table Def. Missing Locally
ZSD_NAPA
Table Def. Missing Locally
ZSD_PRICE_BLOCK
Table Def. Missing Locally
ZSD_SHPCND
Table Def. Missing Locally
ZSHIPVALUES
Table Def. Missing Locally
ZTABMAINT
Table Def. Missing Locally
ZUPS_COUNTRY
Table Def. Missing Locally
ZUPS_FEDEX_LOG
Table Def. Missing Locally
ZUPS_INBOUND
Table Def. Missing Locally
ZUPS_OUTBOUND
Table Def. Missing Locally
ZWMPACK2LABEL
Table Def. Missing Locally
ZWM_CUST_HU
Table Def. Missing Locally
ZWM_HU_HDR
Table Def. Missing Locally
ZWM_HU_ITEM
Table Def. Missing Locally
ZWM_IB_GR
Table Def. Missing Locally
ZYA1
Table Def. Missing Locally
ZYA2
Table Def. Missing Locally
ZYA3
Table Def. Missing Locally
ZYA5
Table Def. Missing Locally
ZYADDER
Table Def. Missing Locally
ZYATYPES
Table Def. Missing Locally
ZYAVG
Table Def. Missing LocallyI ran the report "RSCLICHK" on the target client and below are the results. There are some table differences. How do i syncronnize the tables so that i can successfully complete the remote client copy? Do i make the table changes on the source system or the target system? I was also told that the table changes will take days to complete. What is the most efficient way to syncronize the tables?
AFRU Field Missing Local PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
S001BIW1 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW1 * SIS: Customer Statistics
S001BIW2 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW2 * SIS: Customer statistics
A901 Fields Missing <-> SD-MD-CM VKOK VLOVELACE TRANSP Sales org./Distr. Chl/Division/Cust.group/PH2/Price grp/Pric
LIKP Field Missing Local LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
/SAPTRX/EXT_AOT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EE Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_ETY Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EVT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLD Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDS Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_PAR Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
A850 Table Missing Local SD-MD-CM VKOK TRANSP
A851 Table Missing Local SD-MD-CM VKOK TRANSP
A852 Table Missing Local SD-MD-CM VKOK TRANSP
A900 Table Missing Local SD-MD-CM VKOK TRANSP
A902 Table Missing Local SD-MD-CM VKOK TRANSP
A903 Table Missing Local SD-MD-CM VKOK TRANSP
A904 Table Missing Local SD-MD-CM VKOK TRANSP
A909 Table Missing Local SD-MD-CM VKOK TRANSP
A910 Table Missing Local SD-MD-CM VKOK TRANSP
A911 Table Missing Local SD-MD-CM VKOK TRANSP
A912 Table Missing Local SD-MD-CM VKOK TRANSP
A933 Table Missing Local SD-MD-CM VKOK TRANSP
A935 Table Missing Local SD-MD-CM VKOK TRANSP
A942 Table Missing Local SD-MD-CM VKOK TRANSP
A943 Table Missing Local SD-MD-CM VKOK TRANSP
A944 Table Missing Local SD-MD-CM VKOK TRANSP
A945 Table Missing Local SD-MD-CM VKOK TRANSP
A946 Table Missing Local SD-MD-CM VKOK TRANSP
A947 Table Missing Local SD-MD-CM VKOK TRANSP
A948 Table Missing Local SD-MD-CM VKOK TRANSP
A949 Table Missing Local SD-MD-CM VKOK TRANSP
A952 Table Missing Local SD-MD-CM VKOK TRANSP
A953 Table Missing Local SD-MD-CM VKOK TRANSP
A954 Table Missing Local SD-MD-CM VKOK TRANSP
A955 Table Missing Local SD-MD-CM VKOK TRANSP
A956 Table Missing Local SD-MD-CM VKOK TRANSP
A957 Table Missing Local SD-MD-CM VKOK TRANSP
A958 Table Missing Local SD-MD-CM VKOK TRANSP
A961 Table Missing Local SD-MD-CM VKOK TRANSP
A962 Table Missing Local SD-MD-CM VKOK TRANSP
A963 Table Missing Local SD-MD-CM VKOK TRANSP
A964 Table Missing Local SD-MD-CM VKOK TRANSP
A965 Table Missing Local SD-MD-CM VKOK TRANSP
A966 Table Missing Local SD-MD-CM VKOK TRANSP
A967 Table Missing Local SD-MD-CM VKOK TRANSP
A981 Table Missing Local SD-MD-CM VKOK TRANSP
A982 Table Missing Local SD-MD-CM VKOK TRANSP
A983 Table Missing Local SD-MD-CM VKOK TRANSP
A984 Table Missing Local SD-MD-CM VKOK TRANSP
A985 Table Missing Local SD-MD-CM VKOK TRANSP
A986 Table Missing Local SD-MD-CM VKOK TRANSP
A987 Table Missing Local SD-MD-CM VKOK TRANSP
A999 Table Missing Local SD-MD-CM VKOK TRANSP
B901 Table Missing Local SD-MD-CM VKOK TRANSP
B902 Table Missing Local SD-MD-CM VKOK TRANSP
B903 Table Missing Local SD-MD-CM VKOK TRANSP
B905 Table Missing Local SD-MD-CM VKOK TRANSP
B906 Table Missing Local SD-MD-CM VKOK TRANSP
B907 Table Missing Local SD-MD-CM VKOK TRANSP
B950 Table Missing Local SD-MD-CM VKOK TRANSP
B997 Table Missing Local SD-MD-CM VKOK TRANSP
B998 Table Missing Local SD-MD-CM VKOK TRANSP
B999 Table Missing Local SD-MD-CM VKOK TRANSP
K9RECD1400004 Table Missing Local CO-PA KEG0 TRANSP
KOTD601 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD602 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD603 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE901 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE902 Table Missing Local SD-MD-CM VKOK TRANSP
Z864DATA Table Missing Local ZDEV TRANSP
Z864DIRECT Table Missing Local ZDEV TRANSP
Z864INVOICETYPES Table Missing Local ZDEV TRANSP
Z864ORDERTYPES Table Missing Local ZDEV TRANSP
Z864RATES Table Missing Local ZDEV TRANSP
Z864YENADJUST Table Missing Local ZDEV TRANSP
ZBJOB_EMAIL Table Missing Local ZDEV TRANSP
ZCSTMATNRLBL Table Missing Local ZDEV TRANSP
ZCUSTJULIAN Table Missing Local ZDEV TRANSP
ZFEDEX_COUNTRY Table Missing Local ZDEV TRANSP -
Change Myself system in RSA1 trx after client copy
Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
ChintanHI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks. -
Client Copy Error - ERROR: Type 'F' user exit with SYS_ERROR:
Hello,
We want to create a client copy from client 001 to clien 715.
The client copy test runs successfully.
The following error occurs in normal mode of client copy.
1 ETA028XClient copy from "03.11.2010" "17:12:43"
1 ETA029 System ID............................ "IS3"
1 ETA043 Target client........................ "715"
1 ETA030 R/3 Release.......................... "701"
1 ETA354 Basis Support Package..............."SAPKB70107"
1 ETA031 Host................................. "xxx"
1 ETA000 Start in background............. ....." "
1 ETA032 User................................. "SAP*"
1 ETA033 Parameter
1 ETA034 Source client........................ "001"
1 ETA188 Source client user masters............"001"
1 ETA185 Copier profile:......................."SAP_ALL"
1 ETA036 Table selection
1 ETA177 Customizing data ....................."X"
1 ETA037 With application data................ "X"
1 ETA155 Initialize and recreate......... "X"
1 ETA294 Change documents are not copied
2 ETA367XStart analysis of system "17:12:43"
3 ETA108 "/GC1/CC_EXIT_CLIENT_DELETION" executed " 0"(" 0") entries copied
4 ETA114 Runtime " 0" seconds
3 ETA072 Exit program "/GC1/CC_EXIT_CLIENT_DELETION" successfully executed "17:12:53"
A2EE/SAPAPO/OM 012 "Mandant 715:" "Verbindung nicht oder fehlerhaft gepflegt:" "IS3CLNT001" " "
2 ETA102 ERROR: Type 'F' user exit with SYS_ERROR: "/SAPAPO/OM_CLNT_COPY_DOWNLOAD"
2 ETA534 "RCOD:" " 8" "SY-SUBRC:" " 0"
2 ETA191 Program ended abnormally
Can you help me?
thx
TorstenTorsten,
Are you doing a local client copy in a SCM System. I can see it fails & is looking for SCM specific fn modules & user exits.
If yes, has a look at this notes there are some steps that needs to be done for the transactional date:
894490 - Client copy: Transactional data
And re-post it in the SCM forum: SAP Advanced Planning & Optimization (SAP APO)
- Regards, Dibya -
Logical System and Client copy
Hi Gurus ,
I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
SelvanHi Manjula ,
Below i mentioned the full detail about the error .
RFC destination for client copy in systems with Financials Basis (FINBASIS) component.
The system could not find any suitable RFC destination for processing for client 000. This note also appears if an RFC destination was found but this does not work. o RFC destination: FINBTR@ID3CLNT000 o Error text: Error during the retrieval of the logon data Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection or perform the following steps manually: 1. Create an RFC destination with the target ZK>source client of client copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59. To avoid errors when assigning the password or the authorizations of the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination: - Transaction: FINB_TR_DEST (Destinations for Transport Methods of the Financials Basis) - Client: 000
4. Start the client copy again.
Kindly advice me
selvan -
I had a problem with my List Cube Transaction and for that reason, I had a look at the Infoprovider and also the Data Sources.
When tried to execute the infoproviders in LISTCUBE, the following messages are being displayed in BWT system:
1. Error reading the data of InfoProvider ZIP_RC_01
2. There is still no data source assigned to VirtualProvider ZIP_RC_01
But, when executed the same in BWD, then it is working fine.
I have checked the Data Sources in the R/3 Dev system and the DS has no problem. But, when I check the DS in the R/3 Prod (SS in BWT system), the following error message is displayed in the status bar:
"DataSource Z_IP_RC_DS_1 is not defined in the source system"
I thought, as the system says the Source system is not available, hence the problem in LISTCUBE and thought if we transport the DS again and then replicate in BW, then our problem would be resolved.
But, seems that even though the source system says "PRD300", if I look at SM59 it actually points to our QAS system. It says PRD300 because BWT is a copy down from BWP, and that's the source system we use - in other words the logical name is the same, but the actual servers are different.
In any case, the datasource is transported to our QAS enviroment.
So, once we do a client copy from Prod to Test, even the source systems get copied. If yes, then does it really affect in case of replications and transports???
I am really confused in this part...please explain.
Thanks & RegardsHi,
It looks like the basis team, or whoever performed the Copy from production to QA box hasn't finished all the necessary Steps :
Main transaction to know:
SSC4 -> To create new client
SCCL -> Client copy within local system
SCC9 -> remote client copy
SCC3 -> display client copy log
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci552257,00.html
Probably sounds like transaction BDLS hasn't been done. -
Client copy with configuration data in R/3. Is there any effect on EBP sys
Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advancewaiting online
-
Unable to log in to newly create client copy
I 'm attempting to create a new client from a newly installed ECC 6.0 IDES system. I go into SCC4 and create a new lient '200' and log off.
I try to log in to client 200 using sap* and pass and get wrong username or password error.
I can see the client listed in scc4, but can't log into it.
Any ideas?
BobHello,
Having the previous question answered helped alot, but I do have another question:
Can I put the client copy on a different drive than the original?
I have SAP installed on the E: drive and would like to place the new copy client on the F: drive, can I do that?
Bob -
Dears,
Today I am going to do remote client copy from PRD to QAS.
For it yesterday i scheduled Test run in simulation mode.As i am having two CPU for both Dev and PRD so I scheduled it with 6 Parallel Processes.
But my Test run failed with errors:
Copy Type Remote copy
Test Run
Profile SAP_ALL
Status Ended with Errors
User SAP*
Start on 14.08.2008 / 01:30:54
Last Entry on 14.08.2008 / 05:57:54
Statistics for this Run
- No. of Tables 30,806 of 30,808
- Deleted Lines 15
- Copied Lines 72748,776
Warnings and Errors
Table/Object Component Error
BKPF FI Read or Conversion Error
BSIS FI Read or Conversion Error
Thus showing read or Conversion Error in these two tables.
In System log of source system I also see these error:
ORA-01652 unable to extend temp segment by 2560 in PSAPTEMP
Database Error 1652 at SEL access to table BKPF.
Database Error 1652 at SEL access to table BSIS.
Please suggest how to resolve the issue.
Shivam
Edited by: Shivam Mittal on Aug 14, 2008 6:08 AMHello Shivam
How is your remote copy going on?
Did you increase the size of psap temp in order to carryon with the copy?
Your Source system is PRD system.Are you doing this copy while users are using the PRD system.
If not then this may not be result of client copy? or
if no user is logged in in your PRD system,You have to decide if this is due to client copy.
Let me know what corrective measure taken by you to completed the remote client copy?
normally we dont get this dump in the source system but I have psaptemp around 30 GB or more in al my systems so may be this might have not surfaced in my environment.
Thanks
Amit -
Remote Client Copy - Ended in Erros
Hi Friends,
We recently performed a Remote client copy. What we normally do is we restore an latest offline backup of the Prod into an instance built exclusively for performing client copies into our QA system.
So if our actual PROD is ABC ( production ), the replica system is ADC. We restore latest backup onto ADC. Then from ADC we do a client copy onto AQC ( Quality ). We have n number of clients in AQC. When copying into a particular client we are facing this problem of 3 tables not being able to get copied. They are BKPF,LTAK and SOST. It happened twice that the Remote client ended with errors.
It says "Read or conversion error". The detailed error looks like below ;
TAB_COPY_R_CONTINUE LTAK WITH KEY:
I01 0000066362
Read or conversion error system: ADCT500 table: LTAK
ERROR: Internal error when inserting in table: LTAK
Internal error: 1,262,713 65,536 VERIFY_CNT
Process 00001 has copied data 25.02.2010 18:04:16
Read or conversion error system: ADC500 table: BKPF
Process 00002 has copied data 25.02.2010 19:09:00
Start: Recopy errors 25.02.2010 19:09:02
TAB_COPY_R_CONTINUE BKPF WITH KEY:
2100 5100019665 2008
Read or conversion error system: ADC500 table: BKPF
ERROR: Internal error when inserting in table: BKPF
Internal error: 6,948,636 1,777,664 VERIFY_CNT
Read or conversion error system: ADC500 table: LTAK
TAB_COPY_R_CONTINUE SOST WITH KEY:
OTF 34 000000019247
Read or conversion error system: ADC500 table: SOST
ERROR: Internal error when inserting in table: SOST
Internal error: 2,594,254 180,224 VERIFY_CNT
We approached SAP and they asked to do a DB reorg, run update statistics on both source and target and then re run the client copy.
Well DB reorg is a big activity so we just updated the statistics and ran again the "recopying errors" but still it is the same problem.
Can anybody please suggest something. Thank you.
regards
Vinod KHi Friends,
My apologies for coming back to you guys so late. I kind of was lost to find a solution for this.
Hi Sanujit,
The database logs dont indicate anything at all about this error or i am not able to locate them.
Rajesh,
There was a table comparison done for these tables properties in both source and target and everything looked ok and confirmed by the application.
At this moment we have anyway decided to go a fresh client copy again as lot of time has already passed and there would be differences in source and target tables.
But anyway could you please tell me the procedure to transport tables between source and target systems?
Hi Anil,
SAP iS ECC 6.0 and Oracle is 10.2.0.4.0
Thanks again for your time and pateince.
Regards
Vinod K -
Remote client copy performance
Hello experts,
I need an opinion on following possibilities that could speed up remote client copy:
Increasing maximum number of processes for parallel processing in dialog mode?
Increasing the update processes?
Decreasing the undo retention from default 900 seconds to 600 seconds (Oracle) ?
Increase the number of redo log files?
An opinion or any other insights would be highly appreciated.
Thank you,
RohitWell, the answer is maybe.
You did not supply any information about your run and your system, how can we give you good advice? Any of your proposals might speed up the copy process, but we cannot tell (well decreasing the undo retention and changing the update work processes will not change much). If your hardware (cpu/disk/network) is not exhausted, then increase the number of parallel processes.
Besides that these notes contain good hints regarding copy speedup:
[489690 - CC INFO: Copying large production clients|https://service.sap.com/sap/support/notes/489690]
[446485 - CC-ADMIN: Special copying options|https://service.sap.com/sap/support/notes/446485]
Cheers Michael -
Hi All
am performing remote client copy through scc9, created RFC & tested connection,
this server is not in the transport landscape.
when i execute scc9 and select profile SAP_ALL from target system (Production server) it runs for 5-7 mins and ends with message as "The client copy you started has terminated Tables cannot be converted.
should the users on Production server to be locked.
here is the logs in SCC3:
Client in Source System 500
Copy Type Remote copy
Profile SAP_ALL
Status Cancelled. See Log
User MODI_SUPER
Start on 31.08.2009 / 16:47:19
Last Entry on 31.08.2009 / 16:50:00
Last Action: RFC DDIC System Comparison
Statistics for this Run
- No. of Tables 0 of 53521
- Copied Lines 0
Warnings and Errors
Table Name Component Package
A543 Table Def. Missing Locally
A544 Table Def. Missing Locally
A800 Table Def. Missing Locally
A950 Table Def. Missing Locally
A960 Table Def. Missing Locally
A961 Table Def. Missing Locally
ZCOM Table Def. Missing Locally
ZCSKS Field missing locally
ZEMAIL Table has Incompatible Fields
ZLR_DTL Field missing locally
ZMM_RGP_SLNO Different Field Names
ZPM_CALIBRATION Field missing locally
ZSDD Table not ConvertibleHi Ashun8
Please not be in rush as your SD & MM consultant need to testing some scenarior on sandbox.
As being Basis expert! you should have many comprisions including patch level on both server before initiate the Remote Client Copy.
I will prefer to do the system copy instead the Remote Client copy without downtime on PRD server.
Regards
Anwer Waseem
SAP NetWeaver Basis -
Remote client copy (SCC9) runs a very long time!
remote client copy (SCC9) runs a very long time!
how to do it quickly process?
(eg use imp and exp-oracle tool, as it can be done to understand what the SAP data has been copied and are now in a different location, for Developers)scn001 wrote:
remote client copy (SCC9) runs a very long time!
> how to do it quickly process?
> (eg use imp and exp-oracle tool, as it can be done to understand what the SAP data has been copied and are now in a different location, for Developers)
Hi,
You can export the client, as well but it will take long time too, depended to your client size. Please note that client copy operation should be performed by standard SAP client management tools, such as client export/import or remote copy.
Ask this question to SAP support first. Technically, you can choose many ways to copy a SAP client, but as far as I know that SAP will not support you (such as errors you faced during the client export/import or the problems related by the copy operation), if you use any other 3rd party tool while for the client copy purposes.
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 30, 2011 10:57 AM
Maybe you are looking for
-
Do you recommend the Yoga 13 to your friends and coworkers?
I teaching training courses at about 20+ tech companies each year. This week was my first time using my new Yoga 13 as my presentation machine. After class, 2 out of 13 students approached me and asked about the Yoga. They were in the market for a Wi
-
Will Aperture EVER support my camera's RAW?
I own a Leica D-Lux 2 (same as the Panasonic LX1 with a different exterior) and am crushed that 10.4.4 didn't bring support for its RAW files. I wrote feedback to Apple the day after Aperture was released requesting support but they didn't listen to
-
I have a folder in Photoshop CS2 with the clients name and in it were two folders, RAW and ACCENTS. I imported the RAW file first (Lightroom 1.3, PC, XP Pro) and it showed up with the folder named RAW. I've been trying to rename it to the client name
-
Hi, I am using jdk1.4.1 java version "1.4.1" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1-b21) Java HotSpot(TM) Client VM (build 1.4.1-b21, mixed mode) I have a program run in background(use nohup ... &), It runes well under jdk1.3.
-
Test Messages in SolMan 4.0 (How to)
We would like to send messages from the testworkbench. For the moment it is also in fuction. But these messages appears in our support monitor. But that is not to be like that. The testers should be able to see only their own messages e.g. over a var