SCM5.0 Live Cache issue
Hello,
I am a newer from SCM5.0. I have 2 questions regarding live cache for SCM5.0.
1) if I want to run SNP or PP/DS, the live cache is necessary. that means, we MUST install live cache for APO planning run.
2) From now on, no 32 bit live cache version for SCM5.0. I can just install 64 bit live cache version for SCM5.0. right?
Could anyone give me some comments on the 2 issue? thanks in advance.
Best Regards,
Karl
Hi Karl,
1. In APO whatever runs you take there should be liveCache. The data will be refreshed from database to livecache and is accessed.
In APO data is stored either order series or time series.
2. Yes you have to install 64 bit.
Regards,
Kishore Reddy.
Similar Messages
-
What are the possible live cache issues turn up for demand planning?
HI all,
Can anyone tell me the issues that may arise iin live cache and how to ensure the performance and maintenace of live cache that a planning area is utilizing it.
if the utilization is high how to bring it down!!
Can anyone pls guide me on this!!!
Thanks
PoojaHi Pooja,
1) Accumulation of logs created during demand planning jobs will have an impact on performance
and affect livecache and hence to be cleared periodically
2) Livecache consistency check to be performance at planned intervals
which will reduce livecache issues
3) Through om13 transaction, you can analyse the livecache and LCA objects
and act accordingly
4) You can also carry out /SAPAPO/PSTRUCONS - Consistency Check for Planning Object
Structure and /SAPAPO/TSCONS - Consistency Check for Time Series Network related to
demand planning to avoid livecache issues later
Regards
R. Senthil Mareeswaran. -
hello expert,
I want to install a live cache server on a separate host, but failed more times, and got a same error messge every time as below,
Some database applications are probably still running.Check the log file sdbinst.log.
and the sdbinst.log file information :
starting preparing phase of package Base 7.6.00.29 64 bit
file C:/Windows/SysWOW64/drivers/etc/services not found
installation exited abnormally at Tu, Dec 29, 2009 at 09:23:36
I install live cache server on windows 2008 64bit.
how to slove this issue? can someone help me out? thanks in advance.Sloved.
-
Live Cache Failed (DBM error)
Hi,
I am getting following error while starting live cache(LC10)
"Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system"
Server: system
Users: SAPUSER
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LC1 - system
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LC1 restart -uDBM , -uDBA , -uSQL ,
liveCache LC1 (restart)
The liveCache state is OFFLINE
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
ERROR : restart not possible [please check knldiag!!]
ERROR : liveCache LC1 not started (see "d:\sapdb\data\wrk\LC1\lcinit.log")
In Transaction DB59 i tried connection test "Connect. test with "native SQL" ( LCA ) unsuccesful"
how to restart Live Cache again? what will be the problem?
regards
ThennarasuHello,
what's wrong with the hint you already got?
> ERROR : restart not possible [please check knldiag!!]
Check the knldiag and then we might be able to do something about this issue.
regards,
Lars -
Unable to delete Order does not exist in live cache but in table POSMAPN
Hi Experts,
We are facing an issue where purchase order is not available in live cache (which means no GUID) but exists in database table POSMAPN. We have tried to delete it using standard SAP inconsistent order deletion program and also using BAPI BAPI_POSRVAPS_DELMULTI but not able to delete it.
Can anybody suggest a method by which we can get rid of this order from the system.
Thanks a lot.
Best Regards,
ChandanHi Chandan,
Apologize me for taking your question in a wrong perspective. If you want to delete the same then you need to Re-CIF the order from ECC so that it would come and sit in Live Cache. Once done, try using the BAPI.
If you are not successful with the above approach try running the consistency report /SAPAPO/SDRQCR21 in APO system
so that it first corrects the inconsistency between ECC and APO (Live Cache + DB tables) and then use the BAPI to delete the PO.
Not sure if you have tried this way. If this does not solve your purpose you need to check SAP Notes.
Thanks,
Babu Kilari -
What is the significance of Live Cache in demand planning ?
Hi all,
Can anyone explain me significance of live cache in the demand planning. What are the issues will turn up for live cache if it is not properly maintained?
Thanks
PoojaHi Pooja,
SAP has come up with Live cache concept for storage and most important, quick and efficient processing of transactional data. Its a layer between data base and GUI and even the search methods and storage space has been optimized due to its structure. In DP it is used for storage of time series data whereas in SNP it can store both time series and order series data.
Regarding your second query, it is recommended to have Live cache consistency on a periodic basis for synchrinising data between LC and database tables. You can face many issues due to LC inconsistency as incorrect time series generation, Transactional data discrepancy, COM routine errors during background processing etc.
Let me know if it helps
Regards
Gaurav -
Hi,
I've just completed an SCM 2007 Installation alongwith the live cache.
However, when I try to login to the LC using the dbmcli command (user control/superdba & the pwds. set during installation), it gives the foll. error:
-24950,ERR_USRFAIL: User Authorization failed.
Also, I'm not able to use LC10-->Live Cache Monitoring
Pls help, since it's extremely urgent.
Thanks a lot,
Saba.Hello Saba,
-> For SAP liveCache documentation in English see the SAP note 767598.
-> In general, the error could be due the wrong password of the dbm user.
For example, I created the database instance NLK with the control user and
control password. If I will try to connect to the database with wrong password
I will get this error ::
dbmcli -d NLK -u control,test
Error! Connection failed to node (local) for database NLK:
-24950,ERR_USRFAIL: User authorization failed
-> You are running SCM 2007 < SCM 5.1 > system, therefore you are SAP customer.
Please create the SAP ticket concerning this issue => we could logon via OSS and check the status of your system.
Please set 'high' priority of the ticket, if it's extremely urgent.
If it's the DEMO or PROD system you could escalate the message to 'VH'.
Thank you and best regards, Natalia Khlopina -
Data written to Live cache but not visible in SNP Planning Book
Hello All,
We have an issue this morning, Customer service cordinator placed a Purchase Order in SNP (VMI). Order was sent to ECC and a sales order was created. This morning when we check the sales order, it shows 4574 cases but in TLB Pur chase order, it only some 2000 something. I went to OM16 and checked the sales order and it had the entire 4574 cases written in the live cache. Any help on how to get the entire quantity to be seen is appreciated. Thank you.
Regards,
Rohit.Hi Ada,
Thanks for the reply. The issue got resolved by itself.
Regards,
Rohit. -
Data movement from R/3 DB to APO DB and to Live cache
Dear APO Experts,
I have few questions on live cache and how it works, I understand that Live cache is memory resident database. below are my questions.
1) What sought of data move from R/3 DB to APO DB and then to Live cache DB
2) When data moves from APO DB to Live cache, till how much duration that data stays in live cache
3) And how does data gets pulled in to live cache from APO DB
4) Why do we require live cache logs while data never gets commited to hard disk
5) Do we ever add a datafile to Live cache DB
any info that you provide on this will be really helpfull to me
Thanks,
ChetanHello Chetan,
As you know, itu2019s MAXDB/liveCache forum.
What is the version of your system?
The is documentation available at:
SAP liveCache technology
< Please review document u201CWhat is SAP liveCache technology?u201D >
Sap documents at service.sap.com/scm -> Technology:
u201CliveCache overviewu201D and u201CIntegration overviewu201D
For SAP liveCache documentation also see the SAP note 767598.
Go to SAP link Best Practices for Solution Management: mySAP SCM at SAP liveCache technology ...
And Review the document u201CManage APO Core Interface in SAP APO (3.x) / mySAP SCM (4.x/ 5.0)u201D
1. As you saw in the reference documents the data transferred from the connected R/3 system to APO.
And the transactional data could be uploaded to the liveCache, if you downloaded them
to the APO database cluster tables first. This procedure steps are running during the
system upgrade < for example, from SCM 5.0 to SCM 7.0 ) u2013 report /SAPAPO/OM_LC_UPGRADE_70 steps. Or you want to migrate the
liveCache to another operating system or convert your system to Unicode,
and therefore you want to back up the liveCache data first so that you
can reload it into the liveCache afterwards - SAP Note No. 632357.
2. Could you collaborate more on this sentence. Could you give examples?
3. u201CAnd how does data gets pulled in to live cache from APO DBu201D
The data are not pulled from the APO DB to liveCache.
When you changed the APO data on the system the LCA procedures have been called from ABAP. The objects stored in the class containers in liveCache can be accessed and manipulated only via LCA routines. The registration of the LCA routines is done automatically when the liveCache is started by the LC10. The LCA procedures in the LiveCache are written in C++
and shipped to the customers as binary LCA libraries(LCA build) together with the LiveCache.
< See more details in SAP Note No. 824489 or 1278897 as of SCM 7.0 >
4. See the SAP notes:
869267 FAQ: SAP MaxDB LOG area
1377148 FAQ: SAP MaxDB backup/recovery
5. You could run the quicksizer & estimate how much data you are planning to have in liveCache.
Also the amount of data could be increased by the creation of the new data in APO by users
Or another reason u2026
In general you will add the datavolume to solve or prevent the DB_FULL issue,
See u201C17. What do I do if the data area is full? u201C in SAP note 846890.
Thank you and best regards, Natalia Khlopina -
Hi Folks,
Seeks your help urgently.. I am executing the transaction code /n/sapapo/om17 with object type as product location combination to check the LIve Cache consistency.
But its getting stuck in the sense when it comes to Pegging Id check.. It keeps on looping at the pegging Id check and hence it doesnt proceed further and gives a time out error..Rest all of the things are fine
it would really be appreciated and would be rewarded with points if any body can provide a clue or lead to this issue.
Any OSS notes pertaining to the issue would also be appreciated....
Thanking you in anticipation..
With Regards
Sundaran Nair....Sundaran,
Pegging area checks can be very lengthy. In this case, execute them in background, where in most systems there are no timeout limitations enforced.
Best Regards,
DB49 -
Live cache upgrade on Windows 2003, IA64 clustered environment
Hi,
We are currently upgrading the Live Cache from 7.6.03, BUILD 008-123-159-187 to 7.7.03 BUILD 023-123-174-368.
Note # 508979 is being referred to. The upgrade has completed successfuly on one Node A but is interruopted on Node B. The error log is as follows
INSTALLER_INFO: Version = 7.7.03 Build 023-123-174-368
INSTALLER_INFO: Changelist = 174368
INSTALLER_INFO: MakeId = 285415
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = FMSAP457
SYS_INFO: System = Windows
SYS_INFO: Architecture = IA64
SYS_INFO: Version = NT 5.2
SYS_INFO: Subversion = Service Pack 2
CALL: SDBUPD -INSTANCE -profile APO LiveCache
STDOUT:
SAP liveCache INSTANCE UPDATE
STDOUT: *****************************
STDOUT: starting installation We, Oct 08, 2008 at 01:26:46
STDOUT: operating system: Windows IA64 NT 5.2 Service Pack 2
STDOUT: callers working directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT: installer directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
MSG: InstallRegistry: space check ok: 16843616 kb on W: (17719292 kb total) available
MSG: install registry successfully locked
MSG: read 16 PACKAGES
MSG: net registry size = 133192 bytes
WRN: InstallRegistry::reserveSpace(): file >= 1024 kb
STDOUT: archive directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
MSG: no installation data to migrate
STDOUT: beginning to check sap db instances
STDOUT: existing instance:
STDOUT: 0: LCA "O:/sapdb/LCA/db" 7.6.3.8
STDOUT: 1: none
STDOUT: please enter instance id:
STDIN: 0
STDOUT: please enter database manager operators name:
STDIN: control
STDOUT: please enter database manager operators password: STDOUT:
STDIN:
STDOUT: resume broken instance check
x_server is running
got following x_server data:
version = W64/INTEL 7.6.3 Build 008-123-159-187
dbmsrv uses db_online
dbmsrv uses db_admin
STDOUT: finding instance type...
instance type is LVC
getting catalog encoding...
catalog encoding is UNICODE
STDOUT: finding starting release...
kernel executable is O:\sapdb\LCA\db/pgm/kernel.exe
kernel version by GetBuildString 7.6.3 Build 008-123-159-187
starting release is 7.6.3 Build 008-123-159-187
STDOUT: finding apo starting release...
sapapo lib is O:\sapdb\LCA\db/sap/sapapo.dll
apo version by GetBuildInfo 5.0.0.13
apo starting release is 5.0.0.13
STDOUT: finding migration strategy...
migration is using external livecache consistency
from LVC 7.6.3 Build 008-123-159-187
and APO 5.0.0.13
to LVC 7.7.03
and APO 6.0.0.011
STDOUT: looking for running instances...
no instances found
db_enum
OK
MSG: writing 16 packages
MSG: net install registry size = 133192 bytes
MSG: wrote install registry (156751 bytes)
STDERR: MaxDB instance "LCA" not ready to update
STDERR: looking for running instances...
no instances found
db_enum
OK
STDERR: SAP liveCache instance update exited abnormally at We, Oct 08, 2008 at 01:28:48
MSG: install registry successfully unlocked
Regards
AbrahamAs a SAP customer: please open a support message for this!
regards,
Lars -
Live cache error while correctingg inconsisitency in Resource
Dear Expert
While correcting inconsistency in live cache inconsistency is not getting corrected .
Error is Bucket vector does not exist in Live cache for resource WR201_1000_008
we are using Block planning in PPDS . I have checked SAPAPO/RST02 But resource is there in live cache it status is green
I am attaching error file
Thanks & Regards
VirenderHi Virender,
The problem is a SCM issue, so I already triggered "alert moderator" to forward SCM forum.
Best regards,
James -
Live Cache error with message number /SAPAPO/OM028
Hi Experts,
When I run RLCDEL program for deletion of obsolete SNP orders in the back ground , system shows livecache error alert with message number /SAPAPO/OM028 in the deletion job log. The details of message is "invalid order" or ABAP programming error. Live cache consistency checks are not resolving issue. Product release is 5.1 with SP08. Please suggest a resolution
Regards,
RaghavHi Raghav,
The sap notes 642503 & 973244 will fix your issue but they are for
versions 4.0 and 5.0 respectively.
You can write to SAP by creating a OSS message to update these
two message for version 5.1
This will resolve your issue
Please confirm
Regards
R. Senthil Mareeswaran. -
To remove warning message " CONNECTION TO LIVE CACHE FAILED"
Hi,
I am working on a stand alone SNC system , and I am testing it .
We have not installed Live cache in this system
We are creating master data directly in SNC system
never faced issue while creating location , Business partner
But while creating Product and location product as master go following warning message " CONNECTION TO LIVE CACHE FAILED"
once I click on CREATE , but if I press enter instead it takes me to following screens for master creation
We have even deactivate the live CACHe but still get this warning message,
H0w can i remove this warning mesaage and get in the following master creation screens directly
Regards
Manas MalhotraHi Experts,
IN the above issue i mentioned , forgot to tell you that once i try to save product or location product it again give me the same error and doent have the master
but once SNC is a stand alone system should save it even with out the live cache
there should be some setting to make this system not depended on live cache and still save all the data
please help with this
Regards
Manas -
Installing Live Cache Server on SCM 4.1 system
Hi All,
I have installed an SCM 4.1 Abap + Java System and Live cache client was installed during SCM 4.1 installation.
I would like to install Live cache server and i have problems with it.
I have downloaded the following installation guide
SAP liveCache 7.5.0 For SAP SCM Server 4.1
Document Version 1.02 u2013 April 8th, 2005
Guide tells us to use installation master CD for installating Live cache Server but note 708118 tells us to use the CD 51031447
04 Nov 05 Windows AMD64: Start Installation from liveCache CD
Start the installation of the liveCache server or client from the liveCache
CD (number 51031447) and not from the installation master CD (number
51031443)
Upon checking the cd 51031447 i see SDBINST.exe and upon clicking it i get the following screen
Installation of SAP LiveCache Software
existing profiles
0: APO Livecache
1: Runtime for SAP AS
2: DB Analyzer
3: JDBC
4: Server
5: Loader
6: ODBC
7: All
8: None
Please enter profile id :
I select profile 0 and it comes back with another user input option
Im searching for a document which gives me the procedure for installing Live cache using SBDINST.exe
Regards,
Ershad Ahmed.Hi All,
I went ahead with Option 0 and it asked me for Kernel file and i provided the files.
I checked logs in /sapdb/wrk directory and i see that Installation of SAP livecache finished successfully.
From LC10 i gave database connection name (LCA) and clicked on live cache monitoring and it comes back with an error
Name and Server : LCA - XXXXXXX (XXXXX = Server Name)
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM Error
Return Code : -4
Errror Message: database instance not found.
Application Server: XXXXXX ( Windows NT )
1. Connect. test with "dbmcli db_state"
Error! Connection failed to node XXXXXXX for database LCA: database instance not found
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXX
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -4
Error Message : database instance not found
3. Connect. test with session mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXXX
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -4
Error Message : database instance not found
4. Connect. test with "native SQL" ( LCA )
For detailed information, see the developer trace for work process: 1
From the OS level i gave command dbmcli db_enum and i get OK as reply.
Can someone please let me know how to resolve this issue.
Regards,
Ershad Ahmed.
Maybe you are looking for
-
How to set a default home page in Safari
Is there a way to set up a default home page in Safari so that when I launch it, it will always go to that page first?
-
[Solved]Cannot execute i3 window manager
I installed i3 tiling window manager along with kde(kde could be executed),and follow the step written in i3's wiki: Edit ~/.xinitrc and add: exec i3 exec i3 -V >>~/.i3/i3log >&1 and cp /etc/i3/config ~/.i3/config,after these steps I still cannot exe
-
Problems with photoshop psd files in Lightroom 2
I've been using Photoshop with raw and jpeg images for years, until just recently i started learning Lightroom 2 by watching the Kelby Training series online. I have learned a ton, but there are some things that i am just not able to figure out and f
-
MacBook Pro (Late 2006) freezes consistantly.
So, my macbook pro freezes ALL THE **** TIME. I want to know why, is it faulty hardware is it a software issue. It seems to mainly do it when I put the computer to work, playing games or videos. Also, when the computer gets hot I get horizontal glitc
-
Specifically, do I connect 4 bridge completion resistors to each VEX- channel or do I need to wire them together somehow first?