SCN badge Idea- what should be the correct steps?

Respected Moderators,
I have submitted an idea in the idea space, here it is: SCN badge for SAP Certified Consultants : View Idea
I am confused what to do more:
like there is a table as : SAP Idea place: known issues in 'SCN Innovation and Enhancements' session
Should i need to edit the table and include my submitted idea in a new row?
Your suggestion will be greatly be appreciated.
BR,
Aparajit

Hello Aparajit,
the SAP Idea place: known issues in 'SCN Innovation and Enhancements' session-document is not for promoting new ideas, but a way to keep track of stuff that isn't supposed to be in the SCN session of the Idea Place.
Like already mentioned all you can do now is wait to see, how the other users will rate your idea. You can of course promote it through an status update or via twitter, if you like.
Regards,
Steffi.
Regards,
Steffi.

Similar Messages

  • What should be the proper steps to un-installed CS6 creative suite from an old computer and re-installed onto new computer ?

    I would like to un-install and re-install CS6 Creative Suite onto a new computer.
    What are the proper steps required; in particular for the license code ?
    I worry if I don't do it properly I may not be able to re-activate on my new computer.
    Thanks,

    You do not need to uninstall though you can if you prefer to.  Your license allows you to have two activated installations, so if having a backup installation available is something you could use, you might want to keep the original installation intact.
    If you do not want the old installation in working order then the minimum you need to do is deactivate it by opening one of the programs and choosing Help -> Deactivate.  This will deactivate the entire suite for that machine.  You could leave it this way as the use of the applications is disabled at this point, except if you wish to you can reactivate it.  If you wish to uninstall you should be sure that you perform the deactivation first.
    As far as getting the software on the new machine goes, you install it the same way you did originally, using the serial number to activate it.

  • What should be the next step after certification+internship?

    Hello!
    I cleared my SAP ABAP Certification in February 2014.
    The SAP Partner institute from which I completed my training as well as certification, are offering me an internship for 6 months.
    I'm currently working in Localisation since a year, but I have programming as a major in my academics.
    Also, I have a little background of Java Programming before joining this localisation company.
    After this internship, what should I keep in mind to search for a job in SAP ABAP?
    Also, will this internship increase the chances of my employ-ability in the world of SAP?
    I'm confused about taking my next steps.
    Please help!
    Regards,
    Ashutosh.

    Internship definitely help your chances since you are getting real time experience. It is a good opportunity that you got now to get into SAP. It is not really easy for a fresher to get a job in SAP field only by certification. If you plan your career in SAP, then this is the time to make that move.

  • I have made and submitted iphone webapp, but don't know what is its status. How can I know its status? And what should be the next step

    I have submitted the webapp which is shown here : https://developer.apple.com/submission/iphone/manage_subs.php
    But now I don't know the next step. Please somebody let me know.
    Thanks.

    Wait for the blurb and link to show up on Apple's site. Be sure it is ready on yours.

  • Playbook software corrupted. What should be the next step??

    Hi,
    While trying to update Playbook software through USB data cable, My USB connection was broken. Now When I try to restart my Playbook, I only get one screen that says Blackberry Playbook. In all likelyhood, the software is corrupted. I do not know what to do next. Any solutions???

    not sure if backup will work but try the rest
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • What should be the data type for a field in ztable?

    i am desing a ztable , wht should be the datatype for a field if i want to enter values like -1.5 and -2.5 , negative values with decimals what should be the data type???

    declare as P type. TYPE P DECIMALS 1
    Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
    You can use type P data for such values as distances, weights, amounts of money, and so on.
    Also check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/content.htm
    Regards,
    Maha

  • Transfer ADOBE creative Suite from an old Mac to a new Mac, I have the code but I don't have a CD. What are the correct steps?

    Hi
    I bought a new Mac and I want to transfer my Adobe Creative Suit CS6 to it from my old one. What are the correct steps? Please note that I don't have a CD because I downloaded it via the net. It was an upgrade for the student edition. I heard something about deactivation and reactivation but I don't want to do something wrong then lose my precious software. Please help. Thanks.

    You can download the software and install it using the page linked below.
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    You are allowed to have the software installed and activated on two machines, so there should be no reason to deactivate it on your other machine, or at least you can wait until you see it loaded and working on the new one.

  • I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    >SystemPreferences>Network>DNS

  • How do I add a movie from my laptop to iTunes, what should be the file extension.

    How do I add a movie from my laptop to iTunes, what should be the file extension.

    The extension is usually .mov, .m4v, or .mp4.   But you can't just change the extension.  The movies have to be encoded in a particular fomat.  Anything downloaded from iTunes or plays in Quicktime player will be fine.

  • What should be the quality of video and audio for bandwidth 768KB

    Hello Friends
    We are provoding 768kB bandwidth for our connection. Can any body tell us what should be the quality of video and audio we can set that does not effect frame rate which is 24 FPS.
    thanks in advance.

    Hi Samir
    You could try out the bitrate calculator at http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator/ . It lets you try various encoding settings to see what fits best for the bandwidth available to you.
    Regards
    Mamata

  • What are the correct steps for installing Oracle Entitlement Server SSM?

    Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
    Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
    When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
    Is Admin in the same BEA-HOME as SSM: [default: Yes]:
    Give the location of the Admin: c:\bea\ales32-admin
    Enter the identity directory name which will be used: [default: CoESSM_dir]:
    Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
    Checking if default ARME port is free: 8000
    Generating policy files based on templates ...
    Checking if SSM instance already present
    Checking to see if SSM ARME port is free.
    Checking JDBC parameters...
    Checking to see if asipassword was run...
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
    I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

    Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
    If yes, what are the correct steps of installation ?
    I am getting the errors while configuring the Java SSM.
    Is Admin in the same BEA-HOME as SSM: [default: Yes]:
    Give the location of the Admin: c:\bea\ales32-admin
    Enter the identity directory name which will be used: [default: CoESSM_dir]:
    Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
    Checking if default ARME port is free: 8000
    Generating policy files based on templates ...
    Checking if SSM instance already present
    Checking to see if SSM ARME port is free.
    Checking JDBC parameters...
    Checking to see if asipassword was run...
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
    I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

  • How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?

    How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
    Thank you.

    dadanas wrote:
    Hi Simcah, I have a similar problem. Have you found out any solution?
    thanks, dan
    You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.

  • What should be the approach to perform these tasks?

    I am working on an AIR Desktop application (With Flex) which reads data from some XML Feeds, this data is feed for a Discussion Forum.
    1. I need to store the records from XML Feed into local Database.
    2. Need to check periodically (every 15 minutes) for updates in XML Feed.
    3. Compare XML with Database, and:
         1. Add new forum Threads (Items) to database,
         2. Mark closed on the threads (Items) removed from XML.
         3. Update database if Threads has been updated/modified.
    I hope my requirement is clear, now my question is: What should be the approch to perform these tasks?
    Best Regards,
    Alok Jain

    Echo
    Any Help Please...

  • What should be the procedure for  export parameter in CATT

    Hello Everybody,
    I am working with CATT, and the transactions are <b>ME21N</b> and <b>MIGO</b>.
    when i am executing the transaction <b>ME21N</b> i will get the <b>Pur Ord No</b>in the message, and i would like to export <b>Pur Ord No</b> to the transaction <b>MIGO</b> as thr is one field named Purch.ord no in Migo.
    what should be the Procedure for exporting a parameter?
    Thanks,
    Regards Afroz

    Hello Afroz,
    If you are using eCATT then following is the procedure of capturing messages in the two recording methods - TCD & SAPGUI.
    => TCD Recording Mode:
    In TCD recording mode, after dobleclicking on Interface name from the TCD command in the editor on left side, just before the MSG folder DYNPRO folder will appear on right side.
    -This DYNRPO folder contains the screen sequences contain the screen occurred during recording time. The last Dynpro of this folder contains the messages occurred during recording.
    -Select this last folder & click on Simulate Screen icon of the same Interface editor. It will redirect to the screen where the message values exist. There select the Purchase Order Number and click on Read Field Value icon. Give the name of Export Variable.
    The export variable will contain the value of the purchase order number, which can be passed to MIGO.
    => SAPGUI Recording Mode:
    In the SAPGUI recording mode, the screen on which the message appeared will be used to capture the variable name, which is Purchase Order Number in this case.
    If the Purchase Order Number is second variable of the message displayed(e.g. Purchase Number 2122323 Is Created)
    then use the following code -
    e.g.
    MESSAGE ( MSG_1 ).
    SAPGUI ( ME21N_4001_STEP_5 ).
    ENDMESSAGE ( E_MSG_1 ).
    Assing the value from the message to the export
    parameter
    P_EC_PurOrdNo = E_MSG_1-[1]-MSGV2.
    There are total four MSGV1-MSGV4 variables. Dobule click on MSG_1 of the MESSAGE statement above. Putting the value in the export variable from the right message variable will give the purchase order number.This can be passed as MIGO.
    Regards

Maybe you are looking for