SCNAS ePractice exam gone missing - link goes to blank page.

On
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_880]
Link to ePractice test goes to: [http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D65332] which essentially is a blank page:
see also: {thread:id=1039546}
There seem to be problems with this rush to move pages from sun to oracle.

This appears tohave been moved from the Community Feedback and Suggestions forum to Certification forum.
Regardless of this the issue to fixed, so thankyou someone.

Similar Messages

Install of 10.1.4.0.1 OAM Identity System Console link goes to blank page

I am installing OAM in order to test a .Net Application Integration (IPM 10g). I have been working from the install doc for 10.1.4.0.1 and have got to the point of installing WebPass (Chapter 5 of the install doc). I have installed that component and the "http://ohstest:7777/identity/olbix" page comes up. I am running against an OID install on the same VM running windows 2003 R2.
I headed into chapter 6 and "Setting Up the Identity System". Unfortunatly, when I click the "Identity System Console" link, after a long delay a blank page comes up and the URL is:
http://ohstest:7777/identity/oblix/apps/admin/bin/front_page_admin.cgi
It does this for the User Manager link as well. A blank page at:
http://ohstest:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi
I am not sure where to look to identify the problem. Anyone have any suggestions?
John

I looked in windows event viewer and found that there was more than just the information that was displayed in the dialog. The event viewer says "Oracle Access Manager Identity Server (OracleIdentityServer_0789) is not a valid Win32 application". This indicates to me that it probably was not even able to load the service provider server.
The path to the service exe is --> "C:\Program Files\NetPoint_01\identity\oblix\apps\common\bin\ois_server.exe"
Message was edited by: John Jumper - added path
JohnJ

IE 11 links open to Blank page after last Window update

IE 11 links open to Blank page after last Window update, I tried every trouble shooting and suggestions I could find in all forums but to no avail.
Operating system Win 8.
will try any suggestions and report back.

Hi,
Not sure whether you have tried these methods, if yes, keep trying the others.
1.Run IE with no add-ons firstly.
Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
If works, please follow the steps to narrow down which add-on cause the issue.
Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
2.Try resetting IE.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
3. This is caused due to some registry problems occurred. To resolve this issue, follow the below steps:
Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type regsvr32 actxprxy.dll in the Open box, and then click OK.
If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
Restart the Internet Explorer
4.if still not work, run system restore.
Start>type system restore in the search box>click system restore>follow the steps in the wizard to choose a restore point.
For more information, please see:
Nothing happens when you click a link in Internet Explorer
http://support.microsoft.com/kb/175775/en-us#method4
Hope this helps,
Ada Liu
TechNet Community Support

New link goes to old page

I made a new version of a page, and I updated the link in the home page to go to the new version instead of the old one. Then I put the new page and the new version of the home page on the server. However, when I go to the website, it still links to the old page. I'm using Dreamweaver CS6 on a Mac. I opened the home.htm file in Safari and it linked to the new page just fine. It's just the live site that doesn't work. Maybe I don't understand how to transfer a new version of a page to the server? In the Files panel I drag the new version of the file over the old version and it transfers it (it even asks me if I want to transfer depedent files).

Did you name new page exactly the same as old page?
Did you clear your browser's cache -- Ctrl+R or Ctrl+F5?
Nancy O.

Missing? : File- New- Blank Page- Page type (CSS)- Layout is empty!!

Hello-
I am just learning Dreamweaver CS3 and I'm wondering if something has gone missing on my installation, or if this is how it's supposed to work...
If I do File -> New -> Blank Page (then choose CSS in the Page Type window pane) ... I then find there are no items in the Layout pane for CSS (whereas, under HTML and some others there are lists of items, though others, such as XML, in the list do have items listed. In all, I think about 1/2 are empty, 1/2 are populated)
I've attached a screen shot to clarify this!
Is CSS supposed to be empty, or has something gone missing? I have the book "Dreamweaver CS3 The Missing Manual" but don't find this referenced.
Thanks for the help!
-Ron

ron_on_adobe wrote:
Z-
So, if I understand correctly, the CSS "blank pages" will only become populated as I begin to create CSS styles, and it's normal for this to be an empty pane until then?
You are correct, there is nothing inside of that pane and no, nothing will populate that window, even if you do create css styles :-)
When you create a stylesheet, it will be listed in the CSS panel on the right of the working document, it will not go into that CSS pane at all.
Good to see you looking 'under the hood', it means you are willing to learn everything you can about Dreamweaver.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

Help Page link redirecting to Blank page

Our developer team performed some customization and created a help link on the home page. The problem we are now facing is that this link is redirecting to a blank page.
Kindly provide any suggestions.

Hi,
Share the code or steps u performed for achieving the Help.
Regards,
Gyan

Plugin check Action link going to wrong page

Java(TM) Platform SE 7 U60 plugin is out of date and i get a red Action button to update to v65.
However the link is going to the release notes page instead of the downloads page.

More info:
This is happening on my Windows 7 machine. On my Windows XP machine I had already updated Java from a system tray prompt and the green 'up-to-date' button points to the correct link.
So, to recap, wrong link displayed when out-of-date (http://www.oracle.com/technetwork/java/javase/7u65-relnotes-2229169.html)
Correct link displayed when up-to-date (http://www.java.com/en/download/manual.jsp)

Links lead to blank page, title bar says GIF image 1 x 1 pixels

Firstly - I did post this yesterday but it did not appear - my apologies if it comes up twice.
When I click some links from various pages, including Yahoo and Google search results, I get a blank screen with (GIF Image, 1x1 pixels) in the tab, the correct URL is shown in the address bar. It started occasiobally, now happens with all search results and many (but not all) links from one site to another, whether they open in a new tab/window or the same tab.

Some firewalls like Kaspersky can block content and send a 1x1 GIF image instead.
Kaspersky: Protection > Firewall > Filtration system: disable the "Banner Ad Blocker"
See [[Configuring Kaspersky Internet Security]] and [[Firewalls]]

I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?

I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?

John R M wrote:
Thank you. I believe Apple shoud give you the option as to whether or not you may want to use the arrows.
Apple give users what they want?
Good luck there, the head of iOS Scott Forstall was canned, I suspect this was his favorite picture.
However I bring salvation and sanity, the option to go back to the wonderous Snow Kitty.
How to revert your Mac to Snow Leopard
How to erase and install Snow Leopard 10.6
Be sure to vent to Apple for the stupid changes here
https://www.apple.com/feedback/macosx.html

Export to pdf with missing links

I recieved a indesign document with a few missing links on some small thumbnails. Is there any way to embed pictures with already missing links?
using ID CS5
Thanks

PDF export is a background task by default in CS5, so it can look like nothing is happening for a while (or it could be stalled). Open the Background Tasks panel and see if anything is really going on.

Blu-ray menu link not going to correct page

Here we go again. I try something new, and it doesn't work. Here is the situation:
I have a Blu-ray menu. The main page of the menu has three buttons: Play Movie, Scene Selection, and Bonus Features.
Play Movie starts playing the disc at chapter 1, which is what it's supposed to do.
Scene Selection takes the user to the "first" page of the menu, where each chapter is listed and the first one is highlighted. The chapters span two pages, with the second page accessible by using the "Next" link at the bottom of the page. From that second page, you can either choose a chapter listed or go back to the previous page.
Bonus Features is set to go to page three of the menu, where the user can select to watch extra content which are each in their own timeline. This page is only accessible from the Bonus Features button on the main menu page. However, when it is selected, it goes to page 1 of the Scene Selection menu instead. The link in the Properties is set to go to "Disc 2 Menu:Page 3: Instrumental", which is the name of the menu, the page I want it to go to, and the button I want highlighted. But when I test it in my Blu-ray player, it does not behave correctly. Is there something in Encore I am missing? The button type is set to Normal, like the rest of the buttons on the Default page.
I don't want to keep burning discs to test this out when there doesn't seem to be anything else I can do to fix the problem. Hopefully someone knows what is wrong.

I have music and a video playing in the background, so the multi page menu is great for going to new pages and having the video and music continue playing, instead of having the DVD style menu where everything stops and starts over when you change pages.
So here is the top of my flowchart showing the main page of the menu and where each button goes. Everything works except Bonus Features going to P3B2 (I am guessing B2 is Button 2, which is what I want).
And here is the bottom of my flow chart showing what each button on that menu does.
Hopefully you spot something that is off. I might try to wrangle a second blu-ray player and see if it does it in a different machine as well.

Has anyone else encountered a situation where images suddenly gone missing?

i've had files suddenly gone missing on me several times. i was so sure that this might be a bug but now i think it's user error. at least my error.
a few times i wanted to delete one image and then found that several other images disappeared on me. here i realize that i forgot to deselect all of the other images before deleting the one image i intend to delete.
another time for some unexplained reason, so it seemed, several images disappeared on me. poof! i couldn't find them anywhere, but i didn't think to look in the Rejected library. later on i realize that i've pressed the zero key by mistake while the images were selected. the zero key rejects the images and placed them in the Rejected library. i've found some of my missing images in this library. phew!
for those of you who have some missing images, and haven't taken a look inside your Rejected library, take a look and maybe you'll find some of your missing images in there.
dual 2.7 ghz powerpc g5 Mac OS X (10.4.6) 8 gb ram, xt800 card.

You might just need to clear your search by selecting
the "x" in the search field.
Not quite the same as going into the search field and changing the rating slider and selection to show only deleted as by just clearing the search field does not change the slider rating and you'll still not see the rejected files.

Drag and drop operation resulted in files gone missing

I would really appreciate some help as I have lost about 80 files. Here's what happened: I had a big folder of several hundred files and I was moving those files– photographs – into subfolders.I selected the photo in bridge and then used a drag and drop method to move it. It all went well except in two instances. One group of photos I dragged it to the wrong folder but when I searched I found them. Another group has gone missing. I have searched the whole computer for names of some of the photos in the missing group.it is as if they vanished into thin air. What could have possibly happened?
Thanks in advance!

I selected the photo in bridge and then used a drag and drop method to move it. It all went well except in two instances.
I always use the drag and drop method and if it goes wrong I usually are to fast and don't wait for Bridge to have completed or I did not point to the correct folder.
Without knowing what system you are on and what version of bridge you are using I agree with Curt that the files must be somewhere on your system (also check the Bin) and you better use a dedicated system search for it.
And what is "group.it"? If I do a google search it stops without result and group.it also has not understandable or related results?

Bluetooth Gone Missing

Some way or another, bluetooth has gone missing from my System Preferences pane. I restarted my computer a few days ago and noticed that it was gone. In the past I have used the OS X installation CD and Pacifist to fix problems like this but I'm not sure what file I should install or if this is even the solution. Any help would be greatly appreciated. Thank you!

Hello,
Is it a mouse you are pairing with the MacBook? And can you see the Bluetooth icon in the Status Menu Bar???
Probably a good time to check the boot disk for errors just in case.
Open Disk Utility, in the Utilities folder in the Applications folder.
Select your disk, and click First Aid.
Click Verify Disk.
If the disk needs repairs, do one of the following:
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Restart your computer using Remote Install Mac OS X. Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Checking a hard disk to see if it’s going to fail
You can check the health of your hard disk by checking its Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) status in Disk Utility. Most disk drives include S.M.A.R.T. hardware. Developed by IBM, S.M.A.R.T. hardware allows hard disks to test themselves for potential problems.
To check your hard disk’s S.M.A.R.T. status:
Open Disk Utility, in the Utilities folder in the Applications folder.Select the disk in the list at the left, and look at the bottom of the window for a field named “S.M.A.R.T. Status.”
Is it a mouse you are pairing with the MacBook?
Carolyn

/private/var/tmp has gone missing! ***?!?!?!?

Please, I need help on this one. I had an iBook G4 crash on me, then get as far as the white Apple screen with pinwheel before freezing. I tried running Disk Utility off of an OS X install disk, and it found no volume structure errors. However, when I tried repairing permissions on it, Disk Utility was reporting that the directory /private/var/tmp has gone missing, and it could not repair permissions.
What gives? How can the whole directory get fried? How can I replace it? I've already tried doing an archive and install, but the OS X installed won't let me do an archive and install, probably because this folder is missing.
Can anyone help?

Get Prosoft Data Rescue to recover the data to an external hard disk. Shut down the computer, disconnect the drive any other third party peripherals and then next after that do an erase and install of the operating system. You will probably want to use a CD burner to burn off less frequently used data on occasion at least a couple times so that your hard drive does not fill up with unessential stuff. Some more tips on backing up are on this page:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

SCNAS ePractice exam gone missing - link goes to blank page.

Similar Messages

Maybe you are looking for