Scom 2007 R2 error 31553-31552-31551

We need help with SCOM 2007 R2
We start having a lot problems with our DW database lately,
Each night between Midnight and eight in the morning, the SCOM 2007 R2 RMS server try to write and read a lots data to the SQL Server DW database.
It’s same we missing some table in the DW database (specially the one for the perf performance stage)
We get a lot of errors in RMS event viewer
31553:
31552:

no errors for DBCC CHECKDB
DBCC results for 'OperationsManagerDW'.
Service Broker Msg 9675, State 1: Message Types analyzed: 14.
Service Broker Msg 9676, State 1: Service Contracts analyzed: 6.
Service Broker Msg 9667, State 1: Services analyzed: 3.
Service Broker Msg 9668, State 1: Service Queues analyzed: 3.
Service Broker Msg 9669, State 1: Conversation Endpoints analyzed: 0.
Service Broker Msg 9674, State 1: Conversation Groups analyzed: 0.
Service Broker Msg 9670, State 1: Remote Service Bindings analyzed: 0.
Service Broker Msg 9605, State 1: Conversation Priorities analyzed: 0.
DBCC results for 'sys.sysrscols'.
There are 2341 rows in 81 pages for object "sys.sysrscols".
DBCC results for 'sys.sysrowsets'.
There are 388 rows in 8 pages for object "sys.sysrowsets".
DBCC results for 'sys.sysallocunits'.
There are 497 rows in 32 pages for object "sys.sysallocunits".
DBCC results for 'sys.sysfiles1'.
There are 2 rows in 1 pages for object "sys.sysfiles1".
DBCC results for 'sys.syspriorities'.
There are 0 rows in 0 pages for object "sys.syspriorities".
DBCC results for 'sys.sysfgfrag'.
There are 2 rows in 1 pages for object "sys.sysfgfrag".
DBCC results for 'sys.sysphfg'.
There are 1 rows in 1 pages for object "sys.sysphfg".
DBCC results for 'sys.sysprufiles'.
There are 2 rows in 1 pages for object "sys.sysprufiles".
DBCC results for 'sys.sysftinds'.
There are 0 rows in 0 pages for object "sys.sysftinds".
DBCC results for 'sys.sysowners'.
There are 24 rows in 1 pages for object "sys.sysowners".
DBCC results for 'sys.sysprivs'.
There are 544 rows in 3 pages for object "sys.sysprivs".
DBCC results for 'sys.sysschobjs'.
There are 957 rows in 29 pages for object "sys.sysschobjs".
DBCC results for 'sys.syscolpars'.
There are 3143 rows in 138 pages for object "sys.syscolpars".
DBCC results for 'sys.sysnsobjs'.
There are 1 rows in 1 pages for object "sys.sysnsobjs".
DBCC results for 'sys.syscerts'.
There are 0 rows in 0 pages for object "sys.syscerts".
DBCC results for 'sys.sysxprops'.
There are 9 rows in 1 pages for object "sys.sysxprops".
DBCC results for 'sys.sysscalartypes'.
There are 34 rows in 1 pages for object "sys.sysscalartypes".
DBCC results for 'sys.systypedsubobjs'.
There are 0 rows in 0 pages for object "sys.systypedsubobjs".
DBCC results for 'sys.sysidxstats'.
There are 876 rows in 23 pages for object "sys.sysidxstats".
DBCC results for 'sys.sysiscols'.
There are 1168 rows in 9 pages for object "sys.sysiscols".
DBCC results for 'sys.sysbinobjs'.
There are 23 rows in 1 pages for object "sys.sysbinobjs".
DBCC results for 'sys.sysaudacts'.
There are 0 rows in 0 pages for object "sys.sysaudacts".
DBCC results for 'sys.sysobjvalues'.
There are 1300 rows in 716 pages for object "sys.sysobjvalues".
DBCC results for 'sys.sysclsobjs'.
There are 23 rows in 1 pages for object "sys.sysclsobjs".
DBCC results for 'sys.sysrowsetrefs'.
There are 0 rows in 0 pages for object "sys.sysrowsetrefs".
DBCC results for 'sys.sysremsvcbinds'.
There are 0 rows in 0 pages for object "sys.sysremsvcbinds".
DBCC results for 'sys.sysxmitqueue'.
There are 0 rows in 0 pages for object "sys.sysxmitqueue".
DBCC results for 'sys.sysrts'.
There are 1 rows in 1 pages for object "sys.sysrts".
DBCC results for 'sys.sysconvgroup'.
There are 0 rows in 0 pages for object "sys.sysconvgroup".
DBCC results for 'sys.sysdesend'.
There are 0 rows in 0 pages for object "sys.sysdesend".
DBCC results for 'sys.sysdercv'.
There are 0 rows in 0 pages for object "sys.sysdercv".
DBCC results for 'sys.syssingleobjrefs'.
There are 564 rows in 6 pages for object "sys.syssingleobjrefs".
DBCC results for 'sys.sysmultiobjrefs'.
There are 2813 rows in 26 pages for object "sys.sysmultiobjrefs".
DBCC results for 'sys.sysguidrefs'.
There are 0 rows in 0 pages for object "sys.sysguidrefs".
DBCC results for 'sys.syscompfragments'.
There are 0 rows in 0 pages for object "sys.syscompfragments".
DBCC results for 'sys.sysftstops'.
There are 0 rows in 0 pages for object "sys.sysftstops".
DBCC results for 'sys.sysqnames'.
There are 97 rows in 1 pages for object "sys.sysqnames".
DBCC results for 'sys.sysxmlcomponent'.
There are 99 rows in 1 pages for object "sys.sysxmlcomponent".
DBCC results for 'sys.sysxmlfacet'.
There are 112 rows in 1 pages for object "sys.sysxmlfacet".
DBCC results for 'sys.sysxmlplacement'.
There are 18 rows in 1 pages for object "sys.sysxmlplacement".
DBCC results for 'sys.sysobjkeycrypts'.
There are 0 rows in 0 pages for object "sys.sysobjkeycrypts".
DBCC results for 'sys.sysasymkeys'.
There are 0 rows in 0 pages for object "sys.sysasymkeys".
DBCC results for 'sys.syssqlguides'.
There are 0 rows in 0 pages for object "sys.syssqlguides".
DBCC results for 'sys.sysbinsubobjs'.
There are 3 rows in 1 pages for object "sys.sysbinsubobjs".
DBCC results for 'sys.syssoftobjrefs'.
There are 1375 rows in 21 pages for object "sys.syssoftobjrefs".
DBCC results for 'WorkflowCategory'.
There are 14 rows in 1 pages for object "WorkflowCategory".
DBCC results for 'StandardDatasetAggregation'.
There are 7 rows in 1 pages for object "StandardDatasetAggregation".
DBCC results for 'ManagementGroupDataset'.
There are 5 rows in 1 pages for object "ManagementGroupDataset".
DBCC results for 'DomainTableIndexOptimizationHistory'.
There are 364 rows in 4 pages for object "DomainTableIndexOptimizationHistory".
DBCC results for 'StandardDatasetAggregationHistory'.
There are 784 rows in 8 pages for object "StandardDatasetAggregationHistory".
DBCC results for 'ManagementGroupManagementPackVersion'.
There are 402 rows in 3 pages for object "ManagementGroupManagementPackVersion".
DBCC results for 'DomainTableStatisticsUpdateHistory'.
There are 2437 rows in 36 pages for object "DomainTableStatisticsUpdateHistory".
DBCC results for 'State.StateHourly_9152745748A842B5A3F922A0275534E7'.
There are 4875148 rows in 30858 pages for object "State.StateHourly_9152745748A842B5A3F922A0275534E7".
DBCC results for 'StandardDatasetAggregationStorage'.
There are 15 rows in 5 pages for object "StandardDatasetAggregationStorage".
DBCC results for 'ManagementGroupProductVersion'.
There are 1 rows in 1 pages for object "ManagementGroupProductVersion".
DBCC results for 'Alert.AlertStage2Process'.
There are 0 rows in 0 pages for object "Alert.AlertStage2Process".
DBCC results for 'ManagementPack'.
There are 300 rows in 16 pages for object "ManagementPack".
DBCC results for 'StandardDatasetAggregationStorageIndex'.
There are 27 rows in 1 pages for object "StandardDatasetAggregationStorageIndex".
DBCC results for 'StateInvalidatedHealthServiceOutage'.
There are 534 rows in 2 pages for object "StateInvalidatedHealthServiceOutage".
DBCC results for 'AggregationType'.
There are 4 rows in 1 pages for object "AggregationType".
DBCC results for 'AlertCustomField'.
There are 10 rows in 1 pages for object "AlertCustomField".
DBCC results for 'StandardDatasetOptimizationHistory'.
There are 1437 rows in 16 pages for object "StandardDatasetOptimizationHistory".
DBCC results for 'StateHealthServiceOutage'.
There are 2 rows in 1 pages for object "StateHealthServiceOutage".
DBCC results for 'ManagementPackVersion'.
There are 403 rows in 5 pages for object "ManagementPackVersion".
DBCC results for 'StandardDatasetStagingArea'.
There are 3 rows in 2 pages for object "StandardDatasetStagingArea".
DBCC results for 'StateProcessedHealthServiceOutage'.
There are 788 rows in 7 pages for object "StateProcessedHealthServiceOutage".
DBCC results for 'Dataset'.
There are 5 rows in 1 pages for object "Dataset".
DBCC results for 'StandardDatasetTableMap'.
There are 16 rows in 1 pages for object "StandardDatasetTableMap".
DBCC results for 'ManagementPackVersionReference'.
There are 2443 rows in 13 pages for object "ManagementPackVersionReference".
DBCC results for 'MemberDatabase'.
There are 1 rows in 1 pages for object "MemberDatabase".
DBCC results for 'StateProcessedMaintenanceMode'.
There are 693 rows in 5 pages for object "StateProcessedMaintenanceMode".
DBCC results for 'DatasetType'.
There are 5 rows in 1 pages for object "DatasetType".
DBCC results for 'DatasetTypeManagementPackVersion'.
There are 5 rows in 3 pages for object "DatasetTypeManagementPackVersion".
DBCC results for 'State.StateDaily_EADB03897BA244479B45D4124C395FAE'.
There are 1941597 rows in 12295 pages for object "State.StateDaily_EADB03897BA244479B45D4124C395FAE".
DBCC results for 'DatasetTypeSchemaTypeManagementPackVersion'.
There are 5 rows in 1 pages for object "DatasetTypeSchemaTypeManagementPackVersion".
DBCC results for 'MemberDatabaseScript'.
There are 44 rows in 1 pages for object "MemberDatabaseScript".
DBCC results for 'Event.Event_0F210DD64F9B4F338562CD6B02888618'.
There are 776685 rows in 11273 pages for object "Event.Event_0F210DD64F9B4F338562CD6B02888618".
DBCC results for 'Date'.
There are 18263 rows in 55 pages for object "Date".
DBCC results for 'Event.EventRule_0F210DD64F9B4F338562CD6B02888618'.
There are 776685 rows in 3571 pages for object "Event.EventRule_0F210DD64F9B4F338562CD6B02888618".
DBCC results for 'Monitor'.
There are 2443 rows in 149 pages for object "Monitor".
DBCC results for 'State.StateHourly_80D46E81EA8A4946BAE565718E23567C'.
There are 5002399 rows in 31673 pages for object "State.StateHourly_80D46E81EA8A4946BAE565718E23567C".
DBCC results for 'Event.EventParameter_0F210DD64F9B4F338562CD6B02888618'.
There are 3042619 rows in 41649 pages for object "Event.EventParameter_0F210DD64F9B4F338562CD6B02888618".
DBCC results for 'Diagnostic'.
There are 193 rows in 9 pages for object "Diagnostic".
DBCC results for 'Event.EventDetail_0F210DD64F9B4F338562CD6B02888618'.
There are 776685 rows in 107721 pages for object "Event.EventDetail_0F210DD64F9B4F338562CD6B02888618".
DBCC results for 'MonitorManagementPackVersion'.
There are 2820 rows in 992 pages for object "MonitorManagementPackVersion".
DBCC results for 'ManagedEntityMonitor'.
There are 77535 rows in 297 pages for object "ManagedEntityMonitor".
DBCC results for 'DiagnosticManagementPackVersion'.
There are 197 rows in 50 pages for object "DiagnosticManagementPackVersion".
DBCC results for 'Alert.Alert_1D1033C52B2E4986B16FFC2AC9541209'.
There are 24058 rows in 1385 pages for object "Alert.Alert_1D1033C52B2E4986B16FFC2AC9541209".
DBCC results for 'Perf.PerformanceStage'.
There are 7916552 rows in 71991 pages for object "Perf.PerformanceStage".
DBCC results for 'Override'.
There are 1633 rows in 163 pages for object "Override".
DBCC results for 'Discovery'.
There are 675 rows in 41 pages for object "Discovery".
DBCC results for 'StateAggregationProcessing'.
There are 1 rows in 1 pages for object "StateAggregationProcessing".
DBCC results for 'Alert.AlertResolutionState_1D1033C52B2E4986B16FFC2AC9541209'.
There are 47635 rows in 419 pages for object "Alert.AlertResolutionState_1D1033C52B2E4986B16FFC2AC9541209".
DBCC results for 'OverrideManagementPackVersion'.
There are 3235 rows in 40 pages for object "OverrideManagementPackVersion".
DBCC results for 'DiscoveryManagementPackVersion'.
There are 852 rows in 365 pages for object "DiscoveryManagementPackVersion".
DBCC results for 'Recovery'.
There are 151 rows in 6 pages for object "Recovery".
DBCC results for 'Alert.AlertDetail_1D1033C52B2E4986B16FFC2AC9541209'.
There are 24058 rows in 261 pages for object "Alert.AlertDetail_1D1033C52B2E4986B16FFC2AC9541209".
DBCC results for 'DisplayString'.
There are 18186 rows in 541 pages for object "DisplayString".
DBCC results for 'RecoveryManagementPackVersion'.
There are 168 rows in 39 pages for object "RecoveryManagementPackVersion".
DBCC results for 'State.StateStage'.
There are 0 rows in 0 pages for object "State.StateStage".
DBCC results for 'Alert.AlertParameter_1D1033C52B2E4986B16FFC2AC9541209'.
There are 24071 rows in 340 pages for object "Alert.AlertParameter_1D1033C52B2E4986B16FFC2AC9541209".
DBCC results for 'State.StateHourly_06EE9C72EECF4646ADB70C9D64314A7E'.
There are 5006462 rows in 31695 pages for object "State.StateHourly_06EE9C72EECF4646ADB70C9D64314A7E".
DBCC results for 'DomainSynchronization'.
There are 2 rows in 1 pages for object "DomainSynchronization".
DBCC results for 'Relationship'.
There are 21254 rows in 145 pages for object "Relationship".
DBCC results for 'HealthServiceOutage'.
There are 14248 rows in 81 pages for object "HealthServiceOutage".
DBCC results for 'Alert.AlertStage'.
There are 0 rows in 53 pages for object "Alert.AlertStage".
DBCC results for 'RelationshipManagementGroup'.
There are 42289 rows in 257 pages for object "RelationshipManagementGroup".
DBCC results for 'HealthServiceOutageStage'.
There are 0 rows in 1 pages for object "HealthServiceOutageStage".
DBCC results for 'HealthState'.
There are 6 rows in 1 pages for object "HealthState".
DBCC results for 'sys.filestream_tombstone_1020976249'.
There are 0 rows in 0 pages for object "sys.filestream_tombstone_1020976249".
DBCC results for 'sys.syscommittab'.
There are 0 rows in 0 pages for object "sys.syscommittab".
DBCC results for 'RelationshipProperty'.
There are 42289 rows in 443 pages for object "RelationshipProperty".
DBCC results for 'Image'.
There are 296 rows in 87 pages for object "Image".
DBCC results for 'ImageReference'.
There are 386 rows in 3 pages for object "ImageReference".
DBCC results for 'RelationshipStage'.
There are 0 rows in 1 pages for object "RelationshipStage".
DBCC results for 'MaintenanceMode'.
There are 24680500 rows in 180389 pages for object "MaintenanceMode".
DBCC results for 'RelationshipType'.
There are 396 rows in 26 pages for object "RelationshipType".
DBCC results for 'MaintenanceModeHistory'.
There are 24682067 rows in 448718 pages for object "MaintenanceModeHistory".
DBCC results for 'EventCategory'.
There are 34 rows in 1 pages for object "EventCategory".
DBCC results for 'RelationshipTypeManagementPackVersion'.
There are 454 rows in 3 pages for object "RelationshipTypeManagementPackVersion".
DBCC results for 'MaintenanceModeStage'.
There are 0 rows in 1 pages for object "MaintenanceModeStage".
DBCC results for 'EventChannel'.
There are 3 rows in 1 pages for object "EventChannel".
DBCC results for 'State.StateHourly_17E775D1E37D439285DA1452108BC8C8'.
There are 4584810 rows in 29019 pages for object "State.StateHourly_17E775D1E37D439285DA1452108BC8C8".
DBCC results for 'RelationshipTypeProperty'.
There are 12 rows in 1 pages for object "RelationshipTypeProperty".
DBCC results for 'State.StateHourly_839E9164A3F04101B0C0C301AA9B2B0A'.
There are 5016774 rows in 31753 pages for object "State.StateHourly_839E9164A3F04101B0C0C301AA9B2B0A".
DBCC results for 'MaintenanceSetting'.
There are 1 rows in 1 pages for object "MaintenanceSetting".
DBCC results for 'RelationshipTypePropertyManagementPackVersion'.
There are 14 rows in 1 pages for object "RelationshipTypePropertyManagementPackVersion".
DBCC results for 'EventLevel'.
There are 6 rows in 1 pages for object "EventLevel".
DBCC results for 'EventLoggingComputer'.
There are 147 rows in 2 pages for object "EventLoggingComputer".
DBCC results for 'Report'.
There are 41 rows in 2 pages for object "Report".
DBCC results for 'State.StateHourly_53BCA23A47004CBBA66DE0D5000E34CB'.
There are 5008776 rows in 31707 pages for object "State.StateHourly_53BCA23A47004CBBA66DE0D5000E34CB".
DBCC results for 'sysdiagrams'.
There are 0 rows in 0 pages for object "sysdiagrams".
DBCC results for 'ServiceLevelAgreement'.
There are 1 rows in 1 pages for object "ServiceLevelAgreement".
DBCC results for 'ReportDisplayString'.
There are 1278 rows in 26 pages for object "ReportDisplayString".
DBCC results for 'EventPublisher'.
There are 27 rows in 1 pages for object "EventPublisher".
DBCC results for 'Event.EventStage'.
There are 0 rows in 0 pages for object "Event.EventStage".
DBCC results for 'ServiceLevelAgreementManagementPackVersion'.
There are 1 rows in 1 pages for object "ServiceLevelAgreementManagementPackVersion".
DBCC results for 'ReportManagementPackVersion'.
There are 42 rows in 1 pages for object "ReportManagementPackVersion".
DBCC results for 'ServiceLevelObjective'.
There are 1 rows in 1 pages for object "ServiceLevelObjective".
DBCC results for 'Perf.PerformanceStage_backup3'.
There are 1719008 rows in 15629 pages for object "Perf.PerformanceStage_backup3".
DBCC results for 'ResolutionState'.
There are 4 rows in 1 pages for object "ResolutionState".
DBCC results for 'State.StateHourly_9A176646A6C445569A4DE7FE7DACBC4B'.
There are 4831802 rows in 30585 pages for object "State.StateHourly_9A176646A6C445569A4DE7FE7DACBC4B".
DBCC results for 'EventUserName'.
There are 17 rows in 1 pages for object "EventUserName".
DBCC results for 'ServiceLevelObjectiveManagementPackVersion'.
There are 1 rows in 1 pages for object "ServiceLevelObjectiveManagementPackVersion".
DBCC results for 'CM.CMAemRaw_48B4DB7FAF7048D4B9895952DEDC9D94'.
There are 0 rows in 0 pages for object "CM.CMAemRaw_48B4DB7FAF7048D4B9895952DEDC9D94".
DBCC results for 'Rule'.
There are 4682 rows in 284 pages for object "Rule".
DBCC results for 'ManagedEntity'.
There are 8969 rows in 481 pages for object "ManagedEntity".
DBCC results for 'CM.CMAemDaily_807B8B10B25E4E929BBF2188DAC4A0A6'.
There are 120 rows in 1 pages for object "CM.CMAemDaily_807B8B10B25E4E929BBF2188DAC4A0A6".
DBCC results for 'RuleManagementPackVersion'.
There are 5606 rows in 1997 pages for object "RuleManagementPackVersion".
DBCC results for 'MonitorServiceLevelObjectiveManagementPackVersion'.
There are 1 rows in 1 pages for object "MonitorServiceLevelObjectiveManagementPackVersion".
DBCC results for 'CM.CMAemErrorGroupDaily_807B8B10B25E4E929BBF2188DAC4A0A6'.
There are 0 rows in 0 pages for object "CM.CMAemErrorGroupDaily_807B8B10B25E4E929BBF2188DAC4A0A6".
DBCC results for 'ManagedEntityManagementGroup'.
There are 16795 rows in 106 pages for object "ManagedEntityManagementGroup".
DBCC results for 'SchemaType'.
There are 52 rows in 3 pages for object "SchemaType".
DBCC results for 'CM.CMAemApplicationDaily_807B8B10B25E4E929BBF2188DAC4A0A6'.
There are 0 rows in 0 pages for object "CM.CMAemApplicationDaily_807B8B10B25E4E929BBF2188DAC4A0A6".
DBCC results for 'Perf.PerformanceStage_backup'.
There are 171 rows in 3 pages for object "Perf.PerformanceStage_backup".
DBCC results for 'SchemaTypeManagementPackVersion'.
There are 52 rows in 16 pages for object "SchemaTypeManagementPackVersion".
DBCC results for 'ManagedEntityProperty'.
There are 9040918 rows in 4478401 pages for object "ManagedEntityProperty".
DBCC results for 'Perf.PerformanceStage_backup2'.
There are 26548190 rows in 241349 pages for object "Perf.PerformanceStage_backup2".
DBCC results for 'AemApplication'.
There are 0 rows in 0 pages for object "AemApplication".
DBCC results for 'Script'.
There are 45 rows in 3 pages for object "Script".
DBCC results for 'PerformanceServiceLevelObjectiveManagementPackVersion'.
There are 0 rows in 0 pages for object "PerformanceServiceLevelObjectiveManagementPackVersion".
DBCC results for 'AemComputer'.
There are 0 rows in 0 pages for object "AemComputer".
DBCC results for 'ScriptManagementPackVersion'.
There are 47 rows in 16 pages for object "ScriptManagementPackVersion".
DBCC results for 'ManagedEntityStage'.
There are 0 rows in 1 pages for object "ManagedEntityStage".
DBCC results for 'AemErrorGroup'.
There are 0 rows in 0 pages for object "AemErrorGroup".
DBCC results for 'StringResource'.
There are 4531 rows in 125 pages for object "StringResource".
DBCC results for 'ManagedEntityType'.
There are 1165 rows in 49 pages for object "ManagedEntityType".
DBCC results for 'State.StateHourly_2959516142E34F0BA456040BAFE4605F'.
There are 3442928 rows in 21793 pages for object "State.StateHourly_2959516142E34F0BA456040BAFE4605F".
DBCC results for 'AemEventStage'.
There are 0 rows in 0 pages for object "AemEventStage".
DBCC results for 'ManagedEntityTypeImage'.
There are 2330 rows in 681 pages for object "ManagedEntityTypeImage".
DBCC results for 'SynchronizationProcessState'.
There are 7 rows in 1 pages for object "SynchronizationProcessState".
DBCC results for 'State.StateHourly_06CBB94F4BEF49E8B19E98D519624118'.
There are 3313204 rows in 20971 pages for object "State.StateHourly_06CBB94F4BEF49E8B19E98D519624118".
DBCC results for 'AemManagedEntityStage'.
There are 0 rows in 0 pages for object "AemManagedEntityStage".
DBCC results for 'ManagedEntityTypeManagementPackVersion'.
There are 1387 rows in 8 pages for object "ManagedEntityTypeManagementPackVersion".
DBCC results for 'AemSystemErrorGroup'.
There are 0 rows in 0 pages for object "AemSystemErrorGroup".
DBCC results for 'Time'.
There are 1440 rows in 4 pages for object "Time".
DBCC results for 'sys.queue_messages_1977058079'.
There are 0 rows in 0 pages for object "sys.queue_messages_1977058079".
DBCC results for 'DebugMessage'.
There are 0 rows in 0 pages for object "DebugMessage".
DBCC results for 'ManagedEntityTypeProperty'.
There are 1564 rows in 34 pages for object "ManagedEntityTypeProperty".
DBCC results for 'PerformanceRule'.
There are 431 rows in 7 pages for object "PerformanceRule".
DBCC results for 'TimeZone'.
There are 75 rows in 1 pages for object "TimeZone".
DBCC results for 'sys.queue_messages_2009058193'.
There are 0 rows in 0 pages for object "sys.queue_messages_2009058193".
DBCC results for 'TypedManagedEntity'.
There are 44538 rows in 303 pages for object "TypedManagedEntity".
DBCC results for 'ManagedEntityTypePropertyManagementPackVersion'.
There are 1615 rows in 11 pages for object "ManagedEntityTypePropertyManagementPackVersion".
DBCC results for 'sys.queue_messages_2041058307'.
There are 0 rows in 0 pages for object "sys.queue_messages_2041058307".
DBCC results for 'State.StateHourly_A778183ECA0C42729D895920A735ABBC'.
There are 3974985 rows in 25160 pages for object "State.StateHourly_A778183ECA0C42729D895920A735ABBC".
DBCC results for 'AemUser'.
There are 0 rows in 0 pages for object "AemUser".
DBCC results for 'PerformanceRuleInstance'.
There are 8208 rows in 80 pages for object "PerformanceRuleInstance".
DBCC results for 'DomainTable'.
There are 95 rows in 2 pages for object "DomainTable".
DBCC results for 'StandardDataset'.
There are 4 rows in 1 pages for object "StandardDataset".
DBCC results for 'ManagementGroup'.
There are 1 rows in 1 pages for object "ManagementGroup".
DBCC results for 'State.StateRaw_239044207A314A05B28F918CF8BA189D'.
There are 2152133 rows in 11459 pages for object "State.StateRaw_239044207A314A05B28F918CF8BA189D".
DBCC results for 'TypedManagedEntityStage'.
There are 0 rows in 1 pages for object "TypedManagedEntityStage".
DBCC results for 'DomainTableIndex'.
There are 210 rows in 4 pages for object "DomainTableIndex".
CHECKDB found 0 allocation errors and 0 consistency errors in database 'OperationsManagerDW'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.

Similar Messages

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

SCOM 2007 R2 Reporting space is not launching

Dear Experts,
My Report layer is not launching from SCOM 2007 Operation Console since 1 week.
Recently I did change the password for Data Warehouse Read and Write accounts also I have updated both passwords in the Administration Space at Account section for the both Accounts.
2nd thing i have updated the DW Read account pwd with the Service name SQL Reporting Services (MSSqlServer).
Still I am getting the Error when I launch the Reporting space from the Operation Manager Console and the error is stated that Login failure and unable to login to the Data Warehouse database.
Please let me know what else place I have missed to update the new pwd here ??
Saravana Raja

check and make sure the following procedures were done to update the passwords:
http://blogs.technet.com/b/randymonteleone/archive/2010/03/12/changing-password-on-scom-data-warehouse-run-as-accounts.aspx
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

SCOM 2007 Runbook "Missing Extensions"

Yes, I have the OM console installed on the Runbook server.
We are using SCO 2012 R2 with SCOM 2007 R2 CU7.
I have a simple runbook which starts with the Monitor Date/Time activity > finds warnings > the age > and either closes the warning or creates a critical alert depending on some variables. The runbook runs great in the tester. But when we
actually run it, it will start and then abruptly stop. The log will say that it is missing extensions.
Even when i create a 1 activity runbook (Get Alert) it will succeed in the tester and fail with missing extensions when run live.
Very similar to: http://social.technet.microsoft.com/Forums/en-US/2f30bc5a-4387-4ff2-a518-2d80cfaa0686/runbook-error-some-of-the-extensions-are-missing.
Except we have the console installed.
Question 1: What else may cause the SCOM IP to be missing some extensions/binaries?
Question 2: When using SCO 2012 R2 with SCOM 2007 R2, should we have the SCOM 2007 R2 console, or does the IP actually need the SCOM 2012 console?
Question 3: Why arent these extensions/binaries built into the SCOM IP, or at even installed when SCO is installed? I'm no software developer, but it seems incomplete. (This question was mostly rhetorical)
- Get on the floor, do that dinosaur

Hi,
the problem in the thread you referred to was that the Integration Pack was not Installed on the executing Runbook Server: "Runbook 'Name' stopped some of the Extensions are missing"
See
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester
The knowledge with the SCOM2012 IP and Operator Console is a combination from my experience from field and here:
http://social.technet.microsoft.com/Forums/en-US/8247b6b8-d84b-46f5-a964-2d04568eb5cb/orchestrator-2012-with-ip-for-operations-manager-2007-r2?forum=scoscip
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Cannot remove SMTP Channel Scom 2007 R2

Since my SCOM 2007 machine stopped sending notification mails i try to delete the smpt channels and recreate them.
Now when i try to remove them i get the next error message:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for details. ---> System.ServiceModel.FaultException: The creator of this fault did not specify a Reason.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.ITypeSpaceDataAccess.DeleteNotificationAction(String name)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
at Microsoft.EnterpriseManagement.ManagementGroup.DeleteNotificationAction(NotificationAction notificationAction)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.RemoveNotificationChannel(NotificationAction action, NotificationEndpoint endpoint)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.Delete()
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.DeleteAndCatchKnownExceptions(Object sender, ConsoleJobEventArgs e)
System.ServiceModel.FaultException: The creator of this fault did not specify a Reason.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.ITypeSpaceDataAccess.DeleteNotificationAction(String name)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
Does anyone know how to resolve this?

Thanks for your message...
I have created a new smtp channel and tried to test it with the notification test tool.
I don't get mail and in my event viewer i get the next warning in the application log:
Connection with the Operations Manager Root Management Server failed.
Error: A Management Pack in the Management Group has been added, upgraded, overridden, or deleted. A reconnection will be needed to detect the changes.
Number of occurrence: 1
Retrying in 30 seconds...
I have checked my management server in the administration console which says it is healthy and seems working correctly
Regards,
Gerard

SCOM agent Communication Error

Hello All,
I have a SCOM 2007 R2 CU5 environment, I have some clients(15 servers) to be monitored on the same.
All the 15 servers are in same domain as SCOM server, but different VLAN(there is no internal Firewall). we have opened the port 5723 bi-directionally and installed the agent manually, but in event
viewer its giving Error 21006.
Telnet (IPaddress of SCOM MS server) 5723 is working fine, but unable to telnet using FQDN of MS server.
Kindly help me to resolve this issue

Hi,
SCOM - Move Agents to another Management Server
http://fbinotto.blogspot.dk/2013/05/scom-move-agents-to-another-management.html
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State

Hi All,
I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
shown anywhere in Microsoft SharePoint folder).
I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
Please help as it seems discovery is not working properly.
Regards,
Prabh.

Hi,
Hope the below blog be helpful:
Configuring the SharePoint 2013 Management Pack
http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
Please go through it.
Regards,
Yan Li
Regards, Yan Li

Can overrides from SCOM 2007 R2 be used in a new SCOM 2012 R2 installation?

Hi All,
I'm wondering if we can "easily" use our overrides/configuration from our current SCOM 2007 R2 implementation and use them in a new SCOM
2012 R2 environment that we plan on standing up. We are using SCOM to monitor approx. 400 servers (physical and virtual).
We have been using 2007 R2 for a few years and we'd like to start using 2012 R2. Instead of using the update path (2007 R2 to 2012
to 2012 SP1 to 2012 R2), we are planning on setting up a new 2012 R2 environment and configuring our servers to start reporting to 2012 R2 (after it has been configured in such a way as to "mimic" our 2007 R2 environment).
Ideally, we'd like to avoid going through the upgrade path. (We'll leave our 2007 R2 environment running so that we can still access "historical
data" until the new 2012 R2 environment has had a chance to build up its own "historical data".)
So ... I was thinking we could export our overrides from 2007 R2 and import them into 2012 R2, but I'd like to verify that this approach makes
sense. We haven't done extensive customizations to 2007 R2 in terms of Distributed Applications or Management Pack Objects (although we have made some changes - which I guess we could manually configure in 2012 R2 to offer the same "experience").
The following are some of the Management Packs that we are using in 2007 R2:
Microsoft Windows Active Directory
Active Directory Certificate Services
EMC Storage Monitoring
IBM Hardware
Microsoft Exchange Server 2010
McAfee
Microsoft Forefront Server Protection 2010
Microsoft Office SharePoint Server 2007
Microsoft SQL Server
Microsoft Windows DNS Server
Microsoft Windows WINS
Microsoft Windows Hyper-V
Microsoft Windows Internet Information Services
Microsoft Windows Server
Microsoft Windows DHCP
NetBackup Operations Manager
Office Communications Server
OpsLogix (BlackBerry)
Service Level Dashboard for OpsMgr 2007 R2
SolarWinds Orion
Schedule Maintenance Mode
Team Foundation Server 2010
Virtual Machine Manager
Microsoft Windows Cluster
Operations Manager 2007 R2
I appreciate all feedback and the sharing of you expertise.
Thanks, Joe.

As long as the base pack works and you wish to retain the customisation then you should be ok, there’s a good article
here which explains how to perform the migration and some of implication/things to check.
There will be complications if you’ve stored anything in the default mp but this is explained in the above article.

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Reports for Low disk space alerts in scom 2007

Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
Saravana

Hi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

SCOM 2007 R2 CU 7 SQL Database script update

Hi..I'm in the process of installing CU 7 for SCOM 2007 R2 (SQL 2008 R2). I completed the Server update successfully. While running the SQL operations manager DB upgrade I get the message '(0 row(s) affected'
Auto-attach to process '[144] [SQL] Server' on machine 'Server' succeeded.
The thread 'Server\Instance [87]' (0x8fc) has exited with code 0 (0x0).
The program '[144] [SQL] Server: Server\Instance' has exited with code 0 (0x0).
Also, there are no alerts being generated since yesterday which I assume are due to the database not being updated.
Am I missing something here?
Thanks
blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspx

Hi,
I suggest you follow the official KB methods here.
1. Log on to the computer that hosts the Operations Manager 2007 database by using a user account that has database system administrator (SA) rights to the instance of the Operations Manager 2007 database. To perform the database update remotely, log on
to a computer that hosts SQL Server Management Studio by using a user account that has the appropriate SA rights to the Operations Manager 2007 database.
2. Run SQL Server Management Studio.
3. In the Connect to Server dialog box, connect to the instance of SQL Server that hosts the Operations Manager database. The default database name is OperationsManager.
4. On the toolbar, click New Query.
5. From the SQL Editor toolbar, use the Available databases option to select the Operations Manager database.
6. On the File menu, click Open, browse to C:\program files (x86)\System Center 2007 R2 hotfix utility\KB2783850\SQLUpdate, select the CU_Database.sql file that was extracted by the Windows installer (.msi file), and then click Open.
7. When the file is loaded, click Execute in the SQL Editor toolbar.
8. View the Messages pane to check whether the Transact-SQL commands ran successfully.
9. Exit SQL Server Management Studio.
10. For the Operations Manager data warehouse, repeat steps 1 through 8. However, connect to the instance of SQL Server that hosts the Operations Manager data warehouse, and then run the \SQLUpdate\CU_DataWarehouse.sql file.
More info:
http://support.microsoft.com/kb/2783850
Niki Han
TechNet Community Support

Report with all monitors & their threshold for a server for SCOM 2007 R2

Hi,
I need a report with all monitored monitors & rules with their effective threshold for SCOM 2007 R2. I tried few scripts & tools mentioned on different blogs, but not getting anything.
Any help in this regard would be highly appreciated.
TIA

This would be a custom report, which is not available to my knowledge. You need to consider overrides, and this is the crux of the situation. What you can do is open the pack in MPViewer, and export the pack which will contain the thresholds. And you could
also create an override view, in My Workspace, based on the pack you are interested in.
Otherwise, it will be a custom TSQL query or stored procedure, that you may incorporate into your custom report.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

Hardware Requirement for SCOM 2007

Hello,
I have still SCOM 2007 R2.
I would like to know what is or are the requirements for the hardware:
Disk : I have 300 Gb 10 K will it be enough for the database server or 15 K is mandatory?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

the majority of measurements at least for the DB side which would be the most important aspect would be measured in IOPS. I would wait for 15k drives just b/c your going to have to live with it for a few years. weather 15k drives help your IOPS numbers will
depend on your Raid settings and disk configuration.
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

Schedule a custom report in scom 2007 R2

Hi Guys,
I have created a custom report using visual studio for scom 2007 r2. I can create adhoc reports using that but when I want to schedule it I dont know how to do that. Since default reports from scom has other optional dates like yesterday, Today, last week,
last 7 days. How to do achieve this. Could some one help me on step by steps how to use date picker for scheduling the reports. I have gone through some microsoft link but I could not understand where exactly I need to add the code on my custom xml report.
Please help me.
Thanks,
Naresh

Hi!
You have to add the correct controls in the parameter block, add the code-block, add report parameters as in the parameter block and replace query parameters.
Have you read this:
http://technet.microsoft.com/en-us/library/gg697751.aspx
Markus Bölske, Lumagate. www.lumagate.se Blog:
www.opsmanager.se|www.scdpm.se

Scom 2007 R2 error 31553-31552-31551

Similar Messages

Maybe you are looking for