SCOM 2007 R2 gateway having not granted "log on locally" right
how we can fix the issue. i used a local account for the gateway which is working previously.
Try to Grant the 'Log On Locally' right to the specified run as Account using either Group Policy or Local Computer Policy (under Computer Configuration -> Security Settings -> User Rights Assignment).
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali
Similar Messages
-
Difference between Scom 2007 and Scom 2012 Gateway server setup.
Hi All,
Greetings!!
I would like to know the differences for gateway server setup in Scom 2007 and 2012 versions..
Are there any changes in the data collection or in the configuration? and also the prerequisites for it.
Please let me know these info..
Regards,
GokulThere is no great different in settng up gateway server in SCOM 2007 R2 and SCOM 2012. As summary, it requires
1.Request certificates.
2. Import those certificates into the target computers by using the MOMCertImport.exe tool.
3. Distribute the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe to the management server.
4. Run the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe tool to initiate communication between the management server and the gateway
5. Install the gateway server.
However, the prerequisites has different between SCOM 2007 R2 and SCOM 2012
SCOM 2007 R2 gateway server support folloiwng OS
Windows Server 2003 Standard Edition with Service Pack 1 (SP1)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2)
Windows Server 2003 Standard x64 Edition with SP1 or SP2
Windows Server 2003 Enterprise Edition with SP1
Windows Server 2003 Enterprise Edition with SP2
Windows Server 2003 Enterprise x64 Edition with SP1 or SP2
Windows Server 2003 R2 Standard Edition with SP1 or SP2
Windows Server 2003 R2 Standard x64 Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise x64 Edition with SP1 or SP2
Windows Server 2008 Standard 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Standard with SP1 or SP2
Windows Server 2008 Enterprise 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Enterprise with SP1 or SP2
Windows Server 2008 Datacenter 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Datacenter with SP1 or SP2
Windows Server 2008 R2
Windows Server 2008 R2 with SP1
SCOM 2007 R2 gateway server
CPU :2.8 GHz or faster
Memory: 2 GB of RAM or more
available Space: 20 GB of available hard disk space
NET Framework 2.0
Microsoft Core XML Services (MSXML) 6.0
SCOM 2012 Gateway server
Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.
Server Operating System: must be Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 Core Installation or Windows Server® 2012 R2.
Processor Architecture: must be x64.
Windows PowerShell version: Windows PowerShell version 2.0, or Windows PowerShell version 3.0.
Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.
.NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.
Roger -
Does "Allow log on locally" work with environment variables?
This is merely out of curiosity and just because I'm doing some conceptual gambling.
I'd like to create a GPO having the Allow log on locally set to something like the following list:
%OWNER%
BUILTIN\Administrators
The concept behind this is to prepare the system during OS installation with a value to the OWNER environment variable to allow only the specified user account (apart from the Administrators group, of course) to log on to the system without A) having to
configure this setting locally on the client and B) having a great range of different GPOs to handle all the user/computer combinations.
My questions are:
Does this work at all?
If it works, what do I need to provide as a value?
I've already tried to set <user name>, <domain name>\<user name> and
<user name>@<FQDN> but none of those seem to work.Hi,
Glad to see your problem resolved. Hope your experience could helps other who had same cofusion.
Roger Lu
TechNet Community Support -
SCOM 2007 R2 Root Management server showing Not Monitored State in Ops Mgr Console
Hello Experts,
In my Prod SCOM 2007 R2 environment RMS server state is "Not Monitored", But we are receiving alerts with limitation. By mistakenly I put Maintenance Mode while rebooting RMS server due to slow performance of the server.
Can anybody help me to revert back to the RMS Health state ?We can identify the Performance Signature Data Collection Rules in this example by executing the following SQL Query. This query should be executed in SQL Management Studio against the Operations Manager database.
-- Return all Performance Signature Collection Rules
Use OperationsManager
select
managementpack.mpname,
rules.rulename
from performancesignature with (nolock)
inner join rules with (nolock)
on rules.ruleid = performancesignature.learningruleid
inner join managementpack with(nolock)
on rules.managementpackid = managementpack.managementpackid
group by managementpack.mpname, rules.rulename
order by managementpack.mpname, rules.rulename
This query will return all Performance Signature Collection Rules and their respective Management Pack name. A column is returned for Management Pack name and Rule name.
The following Performance Monitor Counters on a Management Server will provide information concerning Database and Data Warehouse write action insertion batch size and time. If the batch size is growing larger, for example the default batch size is 5000 items,
this indicates either the Management Server is slow inserting the data to the Database or Data Warehouse, or is receiving a burst of Data Items from the Agents or Gateway Servers.
· OpsMgr DB Write Action Modules(*)\Avg. Batch Size
· OpsMgr DB Write Action Modules(*)\Avg. Processing Time
· OpsMgr DW Writer Module(*)\Avg. Batch Processing Time, ms
· OpsMgr DW Writer Module(*)\Avg. Batch Size
From the Database and Data Warehouse write action account Average Processing Time counter, we can understand how long it takes on average to write a batch of data to the Database and Data Warehouse. Depending upon the amount of time it takes to write a batch
of data to the Database, this may present an opportunity for tuning.
Event ID 2115 A Bind Data Source in Management Group
http://blogs.technet.com/b/kevinholman/archive/2008/04/21/event-id-2115-a-bind-data-source-in-management-group.aspx
Niki Han
TechNet Community Support -
Dear Experts,
In our SCOM 2007 R2 environment SQL 2012 DB Engine [Login failed: Account locked out] alerts not received but we are receiving the following alerts fr the DB instance.
1. Database Backup Failed To Complete
2. Login failed: Password expired
3. Log Backup Failed to Complete
4. Login failed: Password cannot be used at this time
5. Login failed: Password must be changed
6. IS Package Failed.
Why we are not receiving the "Login failed: Account locked out" ? Customers are asking the notification email alert for this Rule even I have checked the override settings everything is enabled by default same as above rules.
What can be the issue here ?
Thanks,
Saravana
Saravana RajaHi,
Could you please check the Windows security log for (MSSQLSERVER) event ID 18486? The rule should rely on this event.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State
Hi All,
I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
shown anywhere in Microsoft SharePoint folder).
I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
Please help as it seems discovery is not working properly.
Regards,
Prabh.Hi,
Hope the below blog be helpful:
Configuring the SharePoint 2013 Management Pack
http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
Please go through it.
Regards,
Yan Li
Regards, Yan Li -
SCOM 2007 R2 Reporting space is not launching
Dear Experts,
My Report layer is not launching from SCOM 2007 Operation Console since 1 week.
Recently I did change the password for Data Warehouse Read and Write accounts also I have updated both passwords in the Administration Space at Account section for the both Accounts.
2nd thing i have updated the DW Read account pwd with the Service name SQL Reporting Services (MSSqlServer).
Still I am getting the Error when I launch the Reporting space from the Operation Manager Console and the error is stated that Login failure and unable to login to the Data Warehouse database.
Please let me know what else place I have missed to update the new pwd here ??
Saravana Rajacheck and make sure the following procedures were done to update the passwords:
http://blogs.technet.com/b/randymonteleone/archive/2010/03/12/changing-password-on-scom-data-warehouse-run-as-accounts.aspx
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com -
Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
Exchange servers not reflecting in Server State tab in monitoring in SCOM 2007 R2
Hi,
We have added few exchange servers in SCOM 2007 r2 for monitoring, but few of them are not reflecting in the Monitoring> Exchange 2010> Server State tab, whereas they are healthy in admin tab.
Can anyone help on this?
TIACheck from following:
open firewall.
Enable Exchange Rule for monitoring
Enable proxy Agents
Check Configure monitoring Exchange 2010 as exist below link
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/monitoring-exchange-2010-opsmgr-2007-r2-part1.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
SMGW, gateway monitoring not working
hi team,
when i try to run the Tx SMGW, i get an pop up with a message "connection could not be established to local gateway" (hostname sapgw10)
i tried to telnet to the host and it returns blank to the prompt after few seconds. [ECC6.0, WIN 2003, MSSQL]
D:\usr\sap\DV2\SYS\exe\uc\NTI386>gwmon -v
Connect to gateway on host OSISAP01, service sapgw00 failed
ERROR partner '10.20.40.21:sapgw00' not reached
TIME Fri Jan 02 01:14:18 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
could someone let me know the roadmap to troubleshoot the issue.
the log of the dev_rd as follows.
trc file: "dev_rd", trc level: 1, release: "700"
Mon Dec 15 19:31:56 2008
***LOG S00=> GwInitReader, gateway started ( 2552) [gwxxrd.c 1757]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 150
intno 20050900
make: multithreaded, Unicode, optimized
pid 2552
gateway runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
gateway (version=700.2007.02.22)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Bind service sapgw10 (socket) to port 3310
GwPrintMyHostAddr: my host addresses are :
1 : [10.20.40.21] OSISAP01.OptimalSol.com (HOSTNAME)
2 : [127.0.0.1] OSISAP01.OptimalSol.com (LOCALHOST)
Full qualified hostname = OSISAP01.OptimalSol.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Mon Dec 15 19:31:57 2008
DpShMCreate: sizeof(wp_adm) 31440 (1572)
DpShMCreate: sizeof(tm_adm) 4401096 (21896)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07630040, size: 5073928)
DpShMCreate: allocated sys_adm at 07630040
DpShMCreate: allocated wp_adm at 07632098
DpShMCreate: allocated tm_adm_list at 07639B68
DpShMCreate: allocated tm_adm at 07639B98
DpShMCreate: allocated appc_ca_adm at 07A72120
DpShMCreate: allocated comm_adm at 07A74060
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07AF4F20
DpShMCreate: allocated gw_adm at 07AF4F60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07AF4F90
MtxInit: -2 0 0
Mon Dec 15 19:32:26 2008
GwDpInit: attached to gw_adm at 07AF4F60
Wed Dec 17 00:20:10 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 12 / sock 1412
(SI_ECONN_REFUSE/10061; I4; ST; 10.20.40.17:3301) [nixxi.cpp 2823]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR partner 'dalnas1.optimalsol.com:sapgw01' not reached
TIME Wed Dec 17 00:20:10 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1638
GwTraceHdlInfo:
HANDLE = 12
TIME = Wed Dec 17 00:20:09 2008
SOCKET = 1412
STAT = NI_CONN_WAIT
TYPE = STREAM IPv4
OUT = 0 messages 0 bytes
IN = 0 messages 0 bytes
LOCAL = 0.0.0.0:3104
REMOTE = -
OPTIONS = BUFFERED
ni hdl = 12
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 10.20.40.17
opcode = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers = 0
index = 140
data = 00000000
ext_info = 014A2060
offset = 0
rest_len = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.20.40.17
service = sapgw01
tpname = sapdp01
Wed Dec 31 03:54:49 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
Wed Dec 31 03:54:50 2008
ERROR => NiIRead: SiRecv failed for hdl 10 / sock 1440
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4830) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (048) [gwxxrd.c 11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c 11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11717]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR connection to partner 'osisap02:4830' broken
TIME Wed Dec 31 03:54:49 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4424
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 20753
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 11 / sock 1432
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4834) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (050) [gwxxrd.c 11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c 11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11717]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR connection to partner 'osisap02:4834' broken
TIME Wed Dec 31 03:54:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4424
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 20756
WARNING => NiGetHdlParamEx: invalid hdl 11 [nixx.c 2498]
main: ignore type 0
main: NiSelNext (ni_hdl=16, read=1, write=1, connect=0, hdl_info=07230448)
request from CLIENT
GwRequest: request from client 68
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 16 / sock 1372
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4952) [nixxi.cpp 4424]
Adresse Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (068) [gwxxrd.c 11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c 11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11717]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR connection to partner 'osisap02:4952' broken
TIME Wed Dec 31 03:54:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4424
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 20760
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 7 (94444887)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 6
DpGetCpicCommIdx: found index 7 via appc_hdr
found comm entry 7 (tid/uid/mode/conv_id/a_r: 29/68/0/94444887/0)
GwFiSearchConvId: deleted 94444887 local, conn=7
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 7
GwListRemove: elem 7 not in comm_write_list
GwListRemove: elem 7 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 6
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14778)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER tid 29 wp_ca_blk -1 wp_id -1
-OUT- action SEND_TO_WP uid 68 appc_ca_blk 6 type NOWP
-OUT- new_stat NO_CHANGE mode 0 len 320 rq_id 14778
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 7 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 2/2/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 94444887 (remove=1)
GwListInsert: insert elem 7 into conn_free_list (at begin)
GwListInsert: 498 elems in conn_free_list
GwListRemove: elem 7 not in conn_search_list
GwListRemove: elem 7 not in conn_write_list
GwListRemove: remove elem 7 from conn_inuse_list
GwListRemove: 2 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 16
NiICloseHandle: shutdown and close hdl 16 / sock 1372
GwIFreeMemForLU_TP: freed memory for sys 68
GwListRemove: elem 68 not in sys_r3_list
GwListRemove: elem 68 not in sys_reg_list
GwListRemove: remove elem 68 from sys_inuse_list
GwListRemove: 4 elems in sys_inuse_list
GwUpdateClient: act_sys: 4
GwIDisconnectClient: client 68 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 16 [nixx.c 2498]
main: ignore type 0
main: NiSelNext (ni_hdl=12, read=1, write=1, connect=0, hdl_info=07230348)
request from CLIENT
GwRequest: request from client 85
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 1396
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:1664) [nixxi.cpp 4424]
Adresse Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (085) [gwxxrd.c 11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c 11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11717]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR connection to partner 'osisap02:1664' broken
TIME Wed Dec 31 03:54:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4424
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 20764
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 3 (99889818)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 7
DpGetCpicCommIdx: found index 8 via appc_hdr
found comm entry 8 (tid/uid/mode/conv_id/a_r: 36/283/0/99889818/0)
GwFiSearchConvId: deleted 99889818 local, conn=3
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 8
GwListRemove: elem 8 not in comm_write_list
GwListRemove: elem 8 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 7
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14779)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER tid 36 wp_ca_blk -1 wp_id -1
-OUT- action SEND_TO_WP uid 283 appc_ca_blk 7 type NOWP
-OUT- new_stat NO_CHANGE mode 0 len 320 rq_id 14779
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 3 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 1/1/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 99889818 (remove=1)
GwListInsert: insert elem 3 into conn_free_list (at begin)
GwListInsert: 499 elems in conn_free_list
GwListRemove: elem 3 not in conn_search_list
GwListRemove: elem 3 not in conn_write_list
GwListRemove: remove elem 3 from conn_inuse_list
GwListRemove: 1 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 12
NiICloseHandle: shutdown and close hdl 12 / sock 1396
GwIFreeMemForLU_TP: freed memory for sys 85
GwListRemove: elem 85 not in sys_r3_list
GwListRemove: elem 85 not in sys_reg_list
GwListRemove: remove elem 85 from sys_inuse_list
GwListRemove: 3 elems in sys_inuse_list
GwUpdateClient: act_sys: 3
GwIDisconnectClient: client 85 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 12 [nixx.c 2498]
main: ignore type 0
main: NiSelNext (ni_hdl=23, read=1, write=1, connect=0, hdl_info=07230608)
request from CLIENT
GwRequest: request from client 144
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 23 / sock 1272
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4678) [nixxi.cpp 4424]
Adresse Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (144) [gwxxrd.c 11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c 11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11717]
LOCATION SAP-Gateway on host OSISAP01 / sapgw10
ERROR connection to partner 'osisap02:4678' broken
TIME Wed Dec 31 03:54:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4424
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 20768
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 12 (37288997)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 8
DpGetCpicCommIdx: found index 10 via appc_hdr
found comm entry 10 (tid/uid/mode/conv_id/a_r: 28/561/0/37288997/0)
GwFiSearchConvId: deleted 37288997 local, conn=12
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 10
GwListRemove: elem 10 not in comm_write_list
GwListRemove: elem 10 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 8
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14780)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER tid 28 wp_ca_blk -1 wp_id -1
-OUT- action SEND_TO_WP uid 561 appc_ca_blk 8 type NOWP
-OUT- new_stat NO_CHANGE mode 0 len 320 rq_id 14780
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 12 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 0/0/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 37288997 (remove=1)
GwListInsert: insert elem 12 into conn_free_list (at begin)
GwListInsert: 500 elems in conn_free_list
GwListRemove: elem 12 not in conn_search_list
GwListRemove: elem 12 not in conn_write_list
GwListRemove: remove elem 12 from conn_inuse_list
GwListRemove: 0 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 23
NiICloseHandle: shutdown and close hdl 23 / sock 1272
GwIFreeMemForLU_TP: freed memory for sys 144
GwListRemove: elem 144 not in sys_r3_list
GwListRemove: elem 144 not in sys_reg_list
GwListRemove: remove elem 144 from sys_inuse_list
GwListRemove: 2 elems in sys_inuse_list
GwUpdateClient: act_sys: 2
GwIDisconnectClient: client 144 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 23 [nixx.c 2498]
main: ignore type 0
main: NiSelNext (ni_hdl=9, read=1, write=0, connect=0, hdl_info=07230288)
request from CLIENT
GwRequest: request from client 113
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.21 in cache
NiIGetHostName: addr 10.20.40.21 = hostname 'OSISAP01.OptimalSol.com'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 9 / sock 1460
(SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.21:4191) [nixxi.cpp 4424]
Adresse Offset bad request
GwSelClear: clear RWC for hdl 9
NiICloseHandle: shutdown and close hdl 9 / sock 1460
GwUpdateClient: act_reg: 20403
GwIFreeMemForLU_TP: freed memory for sys 113
GwUpdateClient: act_reg: 20402
GwListRemove: elem 113 not in sys_r3_list
GwListRemove: remove elem 113 from sys_reg_list
GwListRemove: 0 elems in sys_reg_list
GwListRemove: remove elem 113 from sys_inuse_list
GwListRemove: 1 elems in sys_inuse_list
GwUpdateClient: act_sys: 1
GwIDisconnectClient: client 113 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
GwReadReqIndex: (process_id: -1)
GwReadReqIndex: no filled request-index-blockHai,
Please check the link below...
http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/frameset.htm
If you have a stand alone gateway on WINDOWS then you can kill the process and start it again, if you have installed together with your Instance then you should restart the whole Instance.
Killing the process gwrd and then starting or forcing it to start will not work (waste of time), I have had the similar problem sometime back but on UNIX. I guess it will be same in WINDOWS as well.
So the better way is to restart the whole Instance.
Regards,
Yoganand.V -
We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical -
Error -DP_FATAL_ERROR = Gateway could not be started - I better exit now
Hello All,
Error while starting BW 3.5 production server.
The dsip+work.exe is stopped and throwing error not able to connect. please check the folowing developer trace.
Please help my server is down now.
trc file: "dev_disp", trc level: 1, release: "640"
Sat Feb 03 11:05:11 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
sysno 00
sid BWP
systemid 561 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 71
intno 20020600
make: multithreaded, ASCII, 64 bit
pid 2588
***LOG Q00=> DpSapEnvInit, DPStart (00 2588) [dpxxdisp.c 1098]
shared lib "dw_xml.dll" version 71 successfully loaded
shared lib "dw_xtc.dll" version 71 successfully loaded
shared lib "dw_stl.dll" version 71 successfully loaded
shared lib "dw_gui.dll" version 71 successfully loaded
Sat Feb 03 11:05:16 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3873]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpShMCreate: sizeof(wp_adm) 12432 (828)
DpShMCreate: sizeof(tm_adm) 2847776 (14168)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 212000 (424)
DpShMCreate: sizeof(vmc_adm) 0 (400)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B6D0050, size: 3164944)
DpShMCreate: allocated sys_adm at 000000000B6D0050
DpShMCreate: allocated wp_adm at 000000000B6D1850
DpShMCreate: allocated tm_adm_list at 000000000B6D48E0
DpShMCreate: allocated tm_adm at 000000000B6D4910
DpShMCreate: allocated wp_ca_adm at 000000000B98BD30
DpShMCreate: allocated appc_ca_adm at 000000000B990380
DpShMCreate: allocated comm_adm_list at 000000000B991AF0
DpShMCreate: allocated comm_adm at 000000000B991B10
DpShMCreate: allocated vmc_adm_list at 000000000B9C5730
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000B9C5760
DpShMCreate: allocated wall_adm at 000000000B9C5770
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2450MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 2452MB
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 612 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c 516]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c 518]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 31211520 K
Config. maximum size : 31211520 K
Avail. maximum size : 31211520 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
20971520 K
20971520 K
20971520 K
20955136 K
2
e:\pagefile.sys
10240000 K
10240000 K
10240000 K
10240000 K
NT Task Manager Informations
Total Handles : 29491
Total Threads : 882
Total Processes : 74
Commit Charge Total : 4969968 K
Commit Charge Limit : 35180760 K
Commit Charge Peak : 4969968 K
Phys.Memory Total : 4181840 K
Phys.Memory Available : 2908760 K
File Cache : 121984 K
Kernel Memory Total : 101976 K
Kernel Memory Paged : 46688 K
Kernel Memory Nonpaged : 55288 K
Memory usage of current process
Total virt.address space : 0000007499415424 K
Avail.virt.address space : 0000007494314408 K
Private Pages : 0 K
Total heap size : 12579 K
Virtual memory regions : 0 K
Uncommitted heap memory : 5512 K
Allocated heap memory : 5525 K
Moveable heap memory : 140 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
288 K
5816 K
32 K
32 K
6
680
smss.exe
1312 K
1384 K
312 K
1248 K
0
816
winlogon.exe
24000 K
24080 K
10864 K
12624 K
3
876
services.exe
9760 K
9880 K
3896 K
5080 K
2
888
lsass.exe
20168 K
20264 K
12952 K
13240 K
3
1092
svchost.exe
7632 K
7760 K
1848 K
2080 K
1
1264
svchost.exe
46360 K
51608 K
20224 K
29928 K
126
1740
spoolsv.exe
12776 K
13368 K
5736 K
6496 K
2
1928
vcagent.exe
19904 K
19992 K
28784 K
35152 K
2
1960
RMServer.exe
18344 K
18344 K
33584 K
39928 K
2
1980
HbaHsMgr.exe
11560 K
11608 K
26552 K
26624 K
1
1996
svchost.exe
6128 K
6128 K
1304 K
1304 K
0
408
snmp.exe
16184 K
16184 K
5504 K
6528 K
2
696
smhstart.exe
15432 K
15432 K
27320 K
33840 K
2
788
WMIServer.exe
20584 K
25776 K
30560 K
36984 K
14
1136
cpqnimgt.exe
14392 K
14392 K
5120 K
5192 K
2
1352
Cqmgserv.exe
13896 K
14344 K
4064 K
4192 K
33
1372
Cqmgstor.exe
7792 K
8336 K
3296 K
3400 K
2
1392
hpmgtsvc.exe
5440 K
5448 K
1240 K
1256 K
0
1452
hpmcalog.exe
9928 K
9952 K
2688 K
2832 K
1
928
Cqmghost.exe
17848 K
18368 K
5848 K
6088 K
155
1532
hpsmhd.exe
29824 K
31968 K
35328 K
39784 K
32
1672
svchost.exe
12256 K
12336 K
4304 K
24944 K
1
1768
hpesysvc.exe
7656 K
7656 K
1848 K
1848 K
0
1808
hpevtsvc.exe
8112 K
8120 K
2104 K
2104 K
0
1828
hplersvc.exe
9272 K
9272 K
2536 K
2536 K
1
1836
hpmpsvc.exe
5880 K
5880 K
1304 K
1536 K
0
1844
hppfmsvc.exe
12616 K
12648 K
3384 K
3536 K
1
2612
rotatelogs.exe
10448 K
10448 K
26328 K
26336 K
1
2620
rotatelogs.exe
10408 K
10408 K
26320 K
26328 K
1
2680
hpsmhd.exe
55288 K
55320 K
82464 K
89024 K
35
2828
rotatelogs.exe
10448 K
10448 K
26328 K
26336 K
1
2836
rotatelogs.exe
10416 K
10416 K
26320 K
26328 K
1
2652
agntsrvc.exe
16256 K
16544 K
12928 K
15784 K
2
2664
cmd.exe
4576 K
4576 K
3048 K
3048 K
0
2708
dbsnmp.exe
23856 K
23856 K
20488 K
20552 K
3
1480
TNSLSNR.exe
16144 K
16224 K
10336 K
11512 K
2
5816
ORACLE.EXE
194168 K
195232 K
755952 K
758568 K
24
2108
sapstartsrv.exe
27232 K
27232 K
17160 K
17240 K
3
5360
ORACLE.EXE
172088 K
177912 K
409848 K
422008 K
22
5000
msg_server.exe
[MS] J2E_02
16680 K
16680 K
9688 K
9688 K
2
944
enserver.exe
[**] J2E_02
30160 K
30160 K
56616 K
56616 K
3
5736
igswd.exe
[**] J2E_01
5568 K
6240 K
1928 K
2480 K
0
2340
igsmux.exe
22112 K
22112 K
15512 K
15512 K
2
4388
igspw.exe
31992 K
31992 K
11936 K
13136 K
3
740
igspw.exe
32024 K
32024 K
11936 K
13144 K
3
5128
winlogon.exe
9856 K
19232 K
6496 K
8504 K
4
6052
rdpclip.exe
8888 K
8976 K
2048 K
2208 K
1
2568
Explorer.EXE
32752 K
32888 K
9528 K
10008 K
9
5528
cpqteam.exe
5384 K
5384 K
1064 K
1064 K
0
5312
mmc.exe
9104 K
33232 K
15584 K
16072 K
6
932
notepad.exe
616 K
6056 K
1280 K
1280 K
0
232
msg_server.exe
[MS] BWP_00
15112 K
15112 K
8120 K
8128 K
1
2588
disp+work.exe
47600 K
47696 K
121096 K
172264 K
5
2476
igswd.exe
[**] BWP_00
5568 K
6272 K
1960 K
2512 K
0
5160
igsmux.exe
22672 K
22672 K
15888 K
15896 K
2
2304
igspw.exe
18160 K
18160 K
10376 K
13136 K
2
5620
igspw.exe
18160 K
18160 K
10376 K
13136 K
2
Sum
1269080 K
2011488 K
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
ERROR => DpWpKill: illegal pid (-1,5) [dpxxtool.c 2384]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1425
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 03 11:05:26 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Sat Feb 03 05:35:26 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 DIA -1 Run no 0 0 0
7 DIA -1 Run no 0 0 0
8 UPD -1 Run no 0 0 0
9 ENQ -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 BTC -1 Run no 0 0 0
12 BTC -1 Run no 0 0 0
13 SPO -1 Run no 0 0 0
14 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Sat Feb 03 05:35:26 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Sat Feb 03 05:35:26 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Feb 03 05:35:26 2007
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1425
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 03 11:05:31 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
[DpWpDied] W13 handle not set (PID:-1)
[DpWpDied] W14 handle not set (PID:-1)
Stop work processes...
Terminate gui connections
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
detach from message server
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2588) [dpxxdisp.c 8541]
Good Bye .....Hi Kariyath
Increase the page size of your windows machine.Check for the recommanded page size.Remember that the recommanded page size should be the lower limit.If you have any issue feel free to ask.Your prob will be solved
Award suitable points -
SCOM 2007 R2 CU 7 SQL Database script update
Hi..I'm in the process of installing CU 7 for SCOM 2007 R2 (SQL 2008 R2). I completed the Server update successfully. While running the SQL operations manager DB upgrade I get the message '(0 row(s) affected'
Auto-attach to process '[144] [SQL] Server' on machine 'Server' succeeded.
The thread 'Server\Instance [87]' (0x8fc) has exited with code 0 (0x0).
The program '[144] [SQL] Server: Server\Instance' has exited with code 0 (0x0).
Also, there are no alerts being generated since yesterday which I assume are due to the database not being updated.
Am I missing something here?
Thanks
blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspxHi,
I suggest you follow the official KB methods here.
1. Log on to the computer that hosts the Operations Manager 2007 database by using a user account that has database system administrator (SA) rights to the instance of the Operations Manager 2007 database. To perform the database update remotely, log on
to a computer that hosts SQL Server Management Studio by using a user account that has the appropriate SA rights to the Operations Manager 2007 database.
2. Run SQL Server Management Studio.
3. In the Connect to Server dialog box, connect to the instance of SQL Server that hosts the Operations Manager database. The default database name is OperationsManager.
4. On the toolbar, click New Query.
5. From the SQL Editor toolbar, use the Available databases option to select the Operations Manager database.
6. On the File menu, click Open, browse to C:\program files (x86)\System Center 2007 R2 hotfix utility\KB2783850\SQLUpdate, select the CU_Database.sql file that was extracted by the Windows installer (.msi file), and then click Open.
7. When the file is loaded, click Execute in the SQL Editor toolbar.
8. View the Messages pane to check whether the Transact-SQL commands ran successfully.
9. Exit SQL Server Management Studio.
10. For the Operations Manager data warehouse, repeat steps 1 through 8. However, connect to the instance of SQL Server that hosts the Operations Manager data warehouse, and then run the \SQLUpdate\CU_DataWarehouse.sql file.
More info:
http://support.microsoft.com/kb/2783850
Niki Han
TechNet Community Support -
Does the SCOM 2012 agent "look back" in the logs before the service was started?
Does the SCOM 2012 agent "look back" in the logs before the service was started?<o:p></o:p>
We raised this question to our Microsoft rep back when we migrated to SCOM 2007. We wanted to know if SCOM would alert on errors generated before the Heath Service started. For example, errors
logged before the service is started on reboot (which is when some critical errors are logged). We also wondered what happens when the service is restarted...would errors during the same window be missed?
If I remember correctly the MS response was that the agent looks back on startup/restart based on a timestamp of some kind. We did some testing that seemed to confirm this information. I've
recently encountered several instances of errors generated while the service was stopped (primarily during boot up) where SCOM failed to alert on the error.
Can anyone confirm how the SCOM 2012 agent deals with errors generated before the service starts on boot and during service restarts?I would suspect it's with watermarks as it has been in the past. What you should look into is if these alerts you were expecting are event based, and if there are rules set to alert for these conditions. If so, and you don't get an alert,
then you can bring that up with your msft rep. However, they should be caught.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.
There is a watermark. If the agent has been down for a significant period of time, the watermark may not apply, as the log would have rolled - but the entire log will still be processed regardless of what has already been discarded in the log. This may cause
some problems if a monitor picks up an unhealthy state, and the healthy state log entry has already been flushed. In this case, you need to reset health on that particular monitor, or just flush the cache on the agent to start anew.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
SCOM 2007 Runbook "Missing Extensions"
Yes, I have the OM console installed on the Runbook server.
We are using SCO 2012 R2 with SCOM 2007 R2 CU7.
I have a simple runbook which starts with the Monitor Date/Time activity > finds warnings > the age > and either closes the warning or creates a critical alert depending on some variables. The runbook runs great in the tester. But when we
actually run it, it will start and then abruptly stop. The log will say that it is missing extensions.
Even when i create a 1 activity runbook (Get Alert) it will succeed in the tester and fail with missing extensions when run live.
Very similar to: http://social.technet.microsoft.com/Forums/en-US/2f30bc5a-4387-4ff2-a518-2d80cfaa0686/runbook-error-some-of-the-extensions-are-missing.
Except we have the console installed.
Question 1: What else may cause the SCOM IP to be missing some extensions/binaries?
Question 2: When using SCO 2012 R2 with SCOM 2007 R2, should we have the SCOM 2007 R2 console, or does the IP actually need the SCOM 2012 console?
Question 3: Why arent these extensions/binaries built into the SCOM IP, or at even installed when SCO is installed? I'm no software developer, but it seems incomplete. (This question was mostly rhetorical)
- Get on the floor, do that dinosaurHi,
the problem in the thread you referred to was that the Integration Pack was not Installed on the executing Runbook Server: "Runbook 'Name' stopped some of the Extensions are missing"
See
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester
The knowledge with the SCOM2012 IP and Operator Console is a combination from my experience from field and here:
http://social.technet.microsoft.com/Forums/en-US/8247b6b8-d84b-46f5-a964-2d04568eb5cb/orchestrator-2012-with-ip-for-operations-manager-2007-r2?forum=scoscip
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu
Maybe you are looking for
-
How to send an email with file attchment
hi, I have develop one application using HTML DB.In that sending an e-mail facility is also there. I am able to send an email using an the HTMLDB_MAIL.send() procedure. But using this procedure i am unable to attach a file to the mail.Is there any wa
-
Please recommend a sound counting application
Please excuse me if this post is in the wrong section. I have been searching for about a week and cant seem to find an application that counts sounds from a microphone. I have found one that will count beats per minute of a mp3, but I would like to a
-
Hi, I have a customer table with many fields. Two of them are production order no and batch no. When I´m using SE11 and type in a batch no, I get about 2 entries per batch no. If I now use a production order number of the found items for the batch nu
-
Aperture won't import photos from camera?
I'm a longtime Aperture user and have the very latest update from Aperture V.3.1.1 For some reason, I was able to import 10 photos fine this morning, then wasn't able to do it again. I have my Canon camera importing through a USB cable directly, and
-
Header price into revenue account posting
Hello, We have a condition type with calculation type is set as FIXED VALUE and relevant for header condition. When we insert the price in document header for header condition type, system automatically replicates/split the price into line item wise