SCOM 2007 R2 Reporting space is not launching

Dear Experts,
My Report layer is not launching from SCOM 2007 Operation Console since 1 week.
Recently I did change the password for Data Warehouse Read and Write accounts also I have updated both passwords in the Administration Space at Account section for the both Accounts.
2nd thing i have updated the DW Read account pwd with the Service name SQL Reporting Services (MSSqlServer).
Still I am getting the Error when I launch the Reporting space from the Operation Manager Console and the error is stated that Login failure and unable to login to the Data Warehouse database.
Please let me know what else place I have missed to update the new pwd here ??
Saravana Raja

check and make sure the following procedures were done to update the passwords:
http://blogs.technet.com/b/randymonteleone/archive/2010/03/12/changing-password-on-scom-data-warehouse-run-as-accounts.aspx
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

Similar Messages

Reports for Low disk space alerts in scom 2007

Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
Saravana

Hi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Prey game not launching after Security Update 2007-004

After applying Apple Security Update 2007-004, Prey (Mac version) is not launching and continuously crashes on my computer. I have uninstalled all game files and reinstalled the game from the original DVD but with no success. Repairing disc permissions, updating prebindings and other usual maintainence meaures are unfortunately not helping. I have an external USB hard disc running Mac OS 10.4.9 without the Security Update applied and Prey works properly when my computer boots up from this external hard drive. It is therefore apparent that Apple Security Update 2007-004 has most probably caused Prey to become non-functional as prior to this the game was working without any problems whatsoever.
Has anyone else expereinced this problem and are there any suggestions?
Any advice is greatly appreciated.

Contact the game author's site and report it so they can update it.

Report with all monitors & their threshold for a server for SCOM 2007 R2

Hi,
I need a report with all monitored monitors & rules with their effective threshold for SCOM 2007 R2. I tried few scripts & tools mentioned on different blogs, but not getting anything.
Any help in this regard would be highly appreciated.
TIA

This would be a custom report, which is not available to my knowledge. You need to consider overrides, and this is the crux of the situation. What you can do is open the pack in MPViewer, and export the pack which will contain the thresholds. And you could
also create an override view, in My Workspace, based on the pack you are interested in.
Otherwise, it will be a custom TSQL query or stored procedure, that you may incorporate into your custom report.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

SCOM 2012 - Custom disk space report - Computer Groups

Hello,
I've created custom disk report with sql query to pull the disk space for all servers. The report has parameters start data,End date and computer name but now my requirement would be to get the disk reports based on custom created computer group, Is it possible
to feed computer group name instead of computer name in the custom reports?
Regards,
Vijay

Hi,
For SCOM 2007, you can’t select a group of servers and run a free disk space report on them. And for 2012 I think it also like that.
But based on my research, someone said that when you create group with Logical Disk targets, it may work. Here are two similar threads for your reference:
Report on Logical Disk Free Space % for a group of servers
http://social.technet.microsoft.com/Forums/en-US/fbec6fce-8f65-461b-8730-98a0d493c375/report-on-logical-disk-free-space-for-a-group-of-servers?forum=operationsmanagerreporting
Can't target free disk space report at Custom Group
http://social.technet.microsoft.com/Forums/en-US/8555fc3e-eed2-4523-a307-589eb6ff72fc/cant-target-free-disk-space-report-at-custom-group?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Schedule a custom report in scom 2007 R2

Hi Guys,
I have created a custom report using visual studio for scom 2007 r2. I can create adhoc reports using that but when I want to schedule it I dont know how to do that. Since default reports from scom has other optional dates like yesterday, Today, last week,
last 7 days. How to do achieve this. Could some one help me on step by steps how to use date picker for scheduling the reports. I have gone through some microsoft link but I could not understand where exactly I need to add the code on my custom xml report.
Please help me.
Thanks,
Naresh

Hi!
You have to add the correct controls in the parameter block, add the code-block, add report parameters as in the parameter block and replace query parameters.
Have you read this:
http://technet.microsoft.com/en-us/library/gg697751.aspx
Markus Bölske, Lumagate. www.lumagate.se Blog:
www.opsmanager.se|www.scdpm.se

The SCOM reporting service is not starting and SCOM RMS is grey.

Hi,
I have performed an activity in my environment related to password change of all SCOM accounts. I referred to the blogs mentioned below :
http://www.systemcentercentral.com/forums-archive/topic/changing-the-scom-adminservice-account-password/
http://support.microsoft.com/kb/936220
What I did to perform the same, I just do as written in the second blog. I started assigning different roles and service to different users, removing SCOM users from those place. Later on,when all the SCOM users are replaced by the new different user, I
changed the password of the SCOM account from AD. Now I tried to repeat the same steps to put back the scom accounts in place as they were earlier. But now, the server is unavailable and grayed out. Reporting service is not getting started.
All the discoveries have stopped working. There is a flood of event ID 1102 in the event viewer.
What should I do to get the services and working of SCOM in place. Please your help.

Hi Vinay,
Below is where you need to enter these it is same for SCOM 2007 R2 / 2012 / 2012 R2.
Below are the account mappings:
Data Warehouse Action Account - is for the Data writer account.
(scom_dw)
Data Warehouse Report Deployment Account - is for the Data reader account
(scom_dr)
The one which is blacked out in the screenshot will be the main SCOM Action account. (scom_ac)
On the action account change the Account display name as well. (Display name is it will just show outside where i have blacked out my Action account)
Below are the screenshots as well:
Domain\Username.
Gautam.75801

Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State

Hi All,
I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
shown anywhere in Microsoft SharePoint folder).
I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
Please help as it seems discovery is not working properly.
Regards,
Prabh.

Hi,
Hope the below blog be helpful:
Configuring the SharePoint 2013 Management Pack
http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
Please go through it.
Regards,
Yan Li
Regards, Yan Li

SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

I have the below SCOM server roles in my SCOM 2012 R2 set up
1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
2) All the DB servers with SQL 2012 SP1
3) Windows firewall is turned off on all the servers.
4) Success fully installed all the components except SCOM reporting.
While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
Also tried re installing the SQL on Reporting server.
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information".

Hi,
As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
If possible, you may re-install SSRS and then install SCOM reporting service.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

App Not Launching, Problem Reported, Dev (F84Games) Not Responding, Refund?

Hi all, I really need help with the 'Railroad Madness' app purchased for my son's ipad (from F84Games in Los Angeles). When he tried to play/launch it the game just crashes immediately after the splash screen.
Reporting the problem to Apple (through my itunes purchase history 'report a problem' function) suggested contacting the developer directly, which I have done, twice, via email and with an app review describing how the app does not work at all. I have asked F84Games either for a refund or a functioning replacement.
I have patiently waited for over a week on a response from Apple or F84Games, with no reply from either, which has been very disappointing since my general experience is that Apple has excellent customer support. Since the fault of the application is because it does not launch at all (and not a simpler functional issue), it seems reasonable to me that they would send some kind of message responding to my request?
Does Apple allow developers to post and sell 'bad' apps on the app store? I thought Apple had a rigorous approval/testing processes in place to prevent this sort of situation from happening in the first place?
Since I have already reported the problem to Apple via iTunes, I cannot report it a second using a different label.
Please, if anyone out there (or Apple, if you are monitoring these discussions) can advise how I can have my problem resolved, purchase refunded, or get some sort of human reply from Apple support; or at least have the faulty 'Railroad Madness' game removed from the app store so that others do not waste $4.99 I would be most thankful and appreciative.
Thank you, Steve

Hello Lauren, greetings from Australia.
I (and my son) really appreciate the message, thanks!
We look forward to seeing the updated version of Railroad Madness to enjoy playing on our iPad. I hope we have not put you all to too much trouble.
BTW, I tried Ian's suggestions but was unsuccessful. Maybe the problem has something to do with running under the new version of the OS?
Again, thank you for taking the time to respond to my post.
Steve M

Exchange servers not reflecting in Server State tab in monitoring in SCOM 2007 R2

Hi,
We have added few exchange servers in SCOM 2007 r2 for monitoring, but few of them are not reflecting in the Monitoring> Exchange 2010> Server State tab, whereas they are healthy in admin tab.
Can anyone help on this?
TIA

Check from following:
open firewall.
Enable Exchange Rule for monitoring
Enable proxy Agents
Check Configure monitoring Exchange 2010 as exist below link
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/monitoring-exchange-2010-opsmgr-2007-r2-part1.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Changing Settings for Adobe Crash Reporter -CS4- app does not launch

Attempting to follow instructions on http://kb2.adobe.com/cps/508/cpsid_50879.html
The application does not launch and the page has no directions on what to do then. Reinstall Photoshop?
Thanks in advance.
Photoshop 11.0.4 — 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Wo Tai Lao Le
我太老了

Thank you for the prompt response, guru Cox.
Deleting the com.adobe.crashreporter.plist file had no effect. I have never changed files inside any application bundle; however…
…I was able to launch the Adobe Crash Reporter successfully from inside the Bridge CS4 application bundle. The preferences were already set as desired. Comparing the two Adobe Crash Reporter app icons, I noticed that the one inside the CS4 app bundle (the one that will not launch) has its Owner set to system, while the one inside the Bridge app bundle that launches successfully has it set to myusername. Changing that ownership on the non-launching copy of the crash reporter had no effect. I had Repaired Permissions on the disk a couple of times today, with no effect.
Now I wonder whether it's more prudent to leave things as they are, inasmuch as (1) I can't even remember the last time Photoshop crashed on me (the last time Bridge crashed was in March) and (2) now I know the preferences are set as desired.
Later today I'll try re-installing Ps 11 without un-installing first, and I'll report back.
Thanks again.
Wo Tai Lao Le
我太老了

SCOM 2007 R2 Root Management server showing Not Monitored State in Ops Mgr Console

Hello Experts,
In my Prod SCOM 2007 R2 environment RMS server state is "Not Monitored", But we are receiving alerts with limitation. By mistakenly I put Maintenance Mode while rebooting RMS server due to slow performance of the server.
Can anybody help me to revert back to the RMS Health state ?

We can identify the Performance Signature Data Collection Rules in this example by executing the following SQL Query. This query should be executed in SQL Management Studio against the Operations Manager database.
-- Return all Performance Signature Collection Rules
Use OperationsManager
select
managementpack.mpname,
rules.rulename
from performancesignature with (nolock)
inner join rules with (nolock)
on rules.ruleid = performancesignature.learningruleid
inner join managementpack with(nolock)
on rules.managementpackid = managementpack.managementpackid
group by managementpack.mpname, rules.rulename
order by managementpack.mpname, rules.rulename
This query will return all Performance Signature Collection Rules and their respective Management Pack name. A column is returned for Management Pack name and Rule name.
The following Performance Monitor Counters on a Management Server will provide information concerning Database and Data Warehouse write action insertion batch size and time. If the batch size is growing larger, for example the default batch size is 5000 items,
this indicates either the Management Server is slow inserting the data to the Database or Data Warehouse, or is receiving a burst of Data Items from the Agents or Gateway Servers.
· OpsMgr DB Write Action Modules(*)\Avg. Batch Size
· OpsMgr DB Write Action Modules(*)\Avg. Processing Time
· OpsMgr DW Writer Module(*)\Avg. Batch Processing Time, ms
· OpsMgr DW Writer Module(*)\Avg. Batch Size
From the Database and Data Warehouse write action account Average Processing Time counter, we can understand how long it takes on average to write a batch of data to the Database and Data Warehouse. Depending upon the amount of time it takes to write a batch
of data to the Database, this may present an opportunity for tuning.
Event ID 2115 A Bind Data Source in Management Group
http://blogs.technet.com/b/kevinholman/archive/2008/04/21/event-id-2115-a-bind-data-source-in-management-group.aspx
Niki Han
TechNet Community Support

SQL 2012 DB Engine [Login failed: Account locked out] alerts not received from SCOM 2007 R2

Dear Experts,
In our SCOM 2007 R2 environment SQL 2012 DB Engine [Login failed: Account locked out] alerts not received but we are receiving the following alerts fr the DB instance.
1. Database Backup Failed To Complete
2. Login failed: Password expired
3. Log Backup Failed to Complete
4. Login failed: Password cannot be used at this time
5. Login failed: Password must be changed
6. IS Package Failed.
Why we are not receiving the "Login failed: Account locked out" ? Customers are asking the notification email alert for this Rule even I have checked the override settings everything is enabled by default same as above rules.
What can be the issue here ?
Thanks,
Saravana
Saravana Raja

Hi,
Could you please check the Windows security log for (MSSQLSERVER) event ID 18486? The rule should rely on this event.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I get a crash notice. Firefox will not launch at all -- it keeps giving crash notice. I also cannot generate a crash report. I have uninstalled and reinstalled -- same issue. It does not launch.

Firefox crashed this morning. It will not launch even after being uninstalled and reinstalled. All I can get is a crash box. It will not relaunch in any way
== This happened ==
Every time Firefox opened
== this morning -- it did not open ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; yie8)

This sounds the same as my issue. I was browsing in Firefox v6.0 last night and all of a sudden it closed with no notice or error message. When I tried to open FF I received the messaga; We're Sorry - Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts." I does not restart. I have been using IE to browse for a solution and nothing works other than opening as administrator. Now this problem is only on one of my laptops and is fine on my desktop and other laptops so it appears to be something specific to my laptop which is running Window XP Home and Service Pack 3.
Some suggestions were to change the profile (did not work), end the firefox.exe process in task manager (not running in processes) and delete an xpicleanup.exe (not listed).
The only thing that works is to run as administrator but I have to do this everytime. Is ther a solution?
file.

SCOM 2007 R2 Reporting space is not launching

Similar Messages

Maybe you are looking for