SCOM 2012 - Additional Management Server - Database not Found (no errors)
Hello,
I am installing a second management server (SCOM 2012) and am running into an issue connecting to the existing database.
I selected Add a Management server to an existing management group.
On the installer page Configuration/Configure the Operational Database, I enter the sql server name (fqdn) just as I did on the first management server (i took screenshots of the entire install so I could verify what I am
doing). Then the installer takes over for a second to verify the server information. There are no errors but the Database Name is blank, no choices in the drop down, nothing auto-populated.
If I put an incorrect server name in there is an error (as is expected). The port I am connecting on is the same one as the first management server: 1433.
The servers are both running Windows Server 2008 R2 (64bit). They were both created from the same template at the same time.
I used the ODBC Data Source Administrator to test a connection to the SQL server from the Additional Management Server and the test completed successfully.
I checked in the Operations Console to see if there was an entry in the Management Servers list for this second server and there is only the First management server listed there.
Please let me know if you have any suggestions as to how I can see the database names when the server conneciton is not failing. Thanks in advance.
Zach
Hi,
Are the accounts permissions correct? Are you using the same account you used installing the first management server and is it a local admin on the 2nd management server?
If all the above can be answered with yes please check if the 2nd management server is already known inside OpsMgr. If it is delete it from here and try again.
You can also check the OpsMgrSetup.log for more detailed information.
Your problem might be a known one:
http://social.technet.microsoft.com/Forums/en-US/operationsmanagerdeployment/thread/25b05b2f-dd90-44e5-a5cb-c51c9e4944d2
Hope this helps,
Similar Messages
-
Event ID 26319 on SCOM 2012 R2 Management server with RMS emulator role
Hi all,
Two weeks ago we've setup a new SCOM 2012 R2 environment.
We now have the problem that event 26319 is logged every 5 minutes.
An exception was thrown while processing GetUserRolesForOperationAndUser for session ID uuid:dca9765e-37a4-40fc-bb9e-575f278447f9;id=63.
Exception message: Value does not fall within the expected range.
Full Exception: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromStringSid(String SidString, Int32 lOptions, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.GetScopedRoleAssignmentsForUser(Int32 operationNumericId, String userName)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AuthorizationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.ServiceDataLayer.SecurityConfigurationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy.GetUserRolesForOperationAndUser(Guid operationId, String userName)
In the previous weeks I've imported some management packs and did some changes in the user roles.
I've now deleted all custom created user roles but the event is still being logged.
Where does the 'Value does not fall within the expected range.'
message points to ?
Is this related to a imported MP ? I've deleted the built-in administrator user and replaced it by an admin group.
Where do I start to troubleshoot this issue ?
Kind Regards,
J. MonnensYes, it's related to import MP.
For this issue, KB980862 - Event ID 26319 is logged when you import a management pack in Operations Manager 2007 R2
Also you can check below link
http://thoughtsonopsmgr.blogspot.com/2011/08/eventid-26319-exception-was-thrown.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Managed server wls_oim1 not starting no error
Hello Gurus,
my managed server wls_oim1 is not starting, there is only one error for evenHander.xml which is safe to ignore and that came in past also and works fine before.
Now when I check the diagnostic log.
there are the few of the entries from diagnotic log:
[2012-11-16T06:17:38.345-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010010] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] ********** Entering the Authorization Segment with parameters:: LoggedInUserId = 4, target resourceID = null, Feature = SCHEDULER, Action = SCHEDULER_START **********
[2012-11-16T06:17:38.350-08:00] [wls_oim1] [NOTIFICATION] [] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] oesAuthenticIdentity not found in cache
[2012-11-16T06:17:38.353-08:00] [wls_oim1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
[2012-11-16T06:17:38.355-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010104] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] The roles [1, 22, 6, 11, 13, 14, 20, 21, 5, 8, 17, 23, 3, 7, 18, 10, 9, 12, 15, 16] and logged-in userid oiminternal were passed for constructing authentic-identity for the hasAccess calls.
[2012-11-16T06:17:38.362-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010033] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] OES Results are not found in cache with Key F: SCHEDULERS: 4P: SCHEDULER_STARTOESDefinition
[2012-11-16T06:17:38.639-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010021] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] Validating the Internal Obligations: [InternalObligation: name: noop, values: [true], convertToObligation: false, InternalObligation: name: noop, values: [true], convertToObligation: false]
[2012-11-16T06:17:38.642-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010022] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] ---------- The list of Internal Obligation is satisfied, returning TRUE ----------
[2012-11-16T06:17:38.643-08:00] [wls_oim1] [NOTIFICATION] [IAM-1010026] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] ********** Exiting the Authorization Segment with result Decision :PERMIT[[
Obligations from policy: **********
[2012-11-16T06:17:39.218-08:00] [wls_oim1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 38,843.0.JobDetails.START_SCHEDULER
[2012-11-16T06:17:39.349-08:00] [wls_oim1] [NOTIFICATION] [IAM-1020024] [oracle.iam.scheduler.impl.quartz] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 1e1fdf0e0c30c785:-304f413d:13b0993aaea:-8000-0000000000000003,0] [APP: oim#11.1.1.3.0] Execute default action handler with 38843.41423.JobDetails.START_SCHEDULER.entityId=null
Can you please let me know what can be the issue? I am stuck from last 4 weeks on the same issue.
Thanks
RKhello I just restarted the oim server again and here are the lines from files.
From Server Log file:
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153109> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcSELRemote is bound with JNDI name:ejb/stateful/tcSEL#com.thortech.xl.ejb.interfaces.tcSELRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153109> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcSEL_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153122> <BEA-014021> <The EJB 'tcMAV(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153122> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcMAVRemote is bound with JNDI name:ejb/stateful/tcMAV#com.thortech.xl.ejb.interfaces.tcMAVRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153122> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcMAV_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153136> <BEA-014021> <The EJB 'tcEVT(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153136> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcEVTRemote is bound with JNDI name:ejb/stateful/tcEVT#com.thortech.xl.ejb.interfaces.tcEVTRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153136> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcEVT_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153149> <BEA-014021> <The EJB 'tcMIL(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153149> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcMILRemote is bound with JNDI name:ejb/stateful/tcMIL#com.thortech.xl.ejb.interfaces.tcMILRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153149> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcMIL_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153161> <BEA-014021> <The EJB 'tcPRF(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153162> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcPRFRemote is bound with JNDI name:ejb/stateful/tcPRF#com.thortech.xl.ejb.interfaces.tcPRFRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153162> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcPRF_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153173> <BEA-014021> <The EJB 'tcRRT(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153173> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcRRTRemote is bound with JNDI name:ejb/stateful/tcRRT#com.thortech.xl.ejb.interfaces.tcRRTRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153174> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcRRT_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153185> <BEA-014021> <The EJB 'tcORF(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153185> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcORFRemote is bound with JNDI name:ejb/stateful/tcORF#com.thortech.xl.ejb.interfaces.tcORFRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153185> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcORF_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153197> <BEA-014021> <The EJB 'tcSEC(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153197> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcSECRemote is bound with JNDI name:ejb/stateful/tcSEC#com.thortech.xl.ejb.interfaces.tcSECRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153197> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcSEC_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153209> <BEA-014021> <The EJB 'tcACT(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153209> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcACTRemote is bound with JNDI name:ejb/stateful/tcACT#com.thortech.xl.ejb.interfaces.tcACTRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153209> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcACT_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153221> <BEA-014021> <The EJB 'tcERR(Application: oim#11.1.1.3.0, EJBComponent: dataobjects-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153221> <BEA-014022> <******** com.thortech.xl.ejb.interfaces.tcERRRemote is bound with JNDI name:ejb/stateful/tcERR#com.thortech.xl.ejb.interfaces.tcERRRemote ********>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <EJB> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153221> <BEA-010009> <EJB Deployed EJB with JNDI name oim#11_1_1_3_0dataobjects-ejb_jartcERR_Home.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149060> <Module dataobjects-ejb.jar of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149059> <Module workflowservice of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149060> <Module workflowservice of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149059> <Module SchedulerService-web of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149060> <Module SchedulerService-web of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153222> <BEA-149059> <Module oim of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153231> <BEA-149060> <Module oim of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153231> <BEA-149059> <Module admin of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153231> <BEA-149060> <Module admin of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153231> <BEA-149059> <Module xlWebApp of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153231> <BEA-149060> <Module xlWebApp of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153232> <BEA-149059> <Module callbackResponseService of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153233> <BEA-149060> <Module callbackResponseService of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153233> <BEA-149059> <Module jmx-config-lifecycle of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153233> <BEA-149060> <Module jmx-config-lifecycle of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153233> <BEA-149059> <Module sodcheck of application oim [Version=11.1.1.3.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:33 PM PST> <Info> <Deployer> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618153233> <BEA-149060> <Module sodcheck of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server wls_oim1.>
####<Nov 22, 2012 1:02:38 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618158981> <BEA-001516> <Data source connection pool "oimOperationsDB" connected to Database: "Oracle", Version: "Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Oracle Label Security, Data Mining and Real Application Testing options".>
####<Nov 22, 2012 1:02:38 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618158981> <BEA-001517> <Data source connection pool "oimOperationsDB" using Driver: "Oracle JDBC driver", Version: "11.2.0.3.0".>
####<Nov 22, 2012 1:02:39 PM PST> <Info> <Common> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618159018> <BEA-000628> <Created "1" resources for pool "oimOperationsDB", out of which "1" are available and "0" are unavailable.>
####<Nov 22, 2012 1:02:46 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <oiminternal> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618166706> <BEA-001516> <Data source connection pool "oimJMSStoreDS" connected to Database: "Oracle", Version: "Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Oracle Label Security, Data Mining and Real Application Testing options".>
####<Nov 22, 2012 1:02:46 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <oiminternal> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618166706> <BEA-001517> <Data source connection pool "oimJMSStoreDS" using Driver: "Oracle JDBC driver", Version: "11.2.0.3.0".>
####<Nov 22, 2012 1:02:46 PM PST> <Info> <Common> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <oiminternal> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618166707> <BEA-000628> <Created "1" resources for pool "oimJMSStoreDS", out of which "1" are available and "0" are unavailable.>
####<Nov 22, 2012 1:02:48 PM PST> <Info> <Common> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <oiminternal> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618168329> <BEA-000628> <Created "1" resources for pool "oimJMSStoreDS", out of which "1" are available and "0" are unavailable.>
####<Nov 22, 2012 1:02:51 PM PST> <Info> <Common> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <oiminternal> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353618171036> <BEA-000628> <Created "1" resources for pool "oimOperationsDB", out of which "1" are available and "0" are unavailable.>
####<Nov 22, 2012 1:16:28 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1353618988046> <BEA-001128> <Connection for pool "mds-oim" has been closed.>
####<Nov 22, 2012 1:16:28 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1353618988105> <BEA-001128> <Connection for pool "mds-owsm" has been closed.>
####<Nov 22, 2012 1:16:28 PM PST> <Info> <JDBC> <fusion> <wls_oim1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1353618988283> <BEA-001128> <Connection for pool "oimOperationsDB" has been closed.>
####<Nov 22, 2012 1:16:56 PM PST> <Info> <Common> <fusion> <wls_oim1> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <<anonymous>> <> <1e1fdf0e0c30c785:b8fee1:13b29ecc862:-8000-0000000000000003> <1353619016632> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.> -
"Physical Database Not Found" at client pc. crystal reports 8.5 / VB 6 / Sql Server 2000
Hi All
I am using Crysta; Reports 8.5 with Visual Basic 6.0 and Sql Server 2000.
Report viewer is showing an error "Physical Database not found" when running at user's machine.
If i install the crystal reports, the reports shows perfect.
which are the files to be included for the deployment setup.
does anybody know how to solve this problem.
thanks in advance.
sam alexMy solution:
Copy p2bbde.dll to windows dir, system and system32
Ciao,
Willy -
SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?
Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session EndedHi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Deploy scom 2012 r2 on server 2012 r2
Going to deploy scom 2012 r2 on server 2012 r2 with sql 2012 sp1. a few questions before starting:
1. roles placement: server1 - management server, operation console;
server2: database server, reporting server;
Not sure where to place web console - server1 or server2?
2. what are the least privileges to have for the installation account - domain user with local administrators?
should the servers' system account need to be member of local administrators?
3. what about other SCOM specific accounts? what least privileges they need?
Thanks in advance.1. You can place it on the 1st server. do note however the downside doing all in one box SCOM components.
2. It would be best to use a domain user account with local admin rights on the box
3. Its all in the SCOM deployment docs..
You might want to check this link
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx (same as
Blake Mengotto)
Hope this helps.
Thanks, -
RMAN-target database not found
Hello All:
we have rman config (0 level bkp) for our PROD backup, rman catalog is on a different server. running OK. heaving 0 level backup of our PROD.... no issue.
Now we have one more PROD db implemented recently for payroll on seperate server, so we decided to have rman backup of this also.
we set that rman script to here also and made the neccessary changes.
It is heaving backup, archive backup ... no issue ...
but it error while "RMAN Catalog resync"
that part from script is
## RMAN Catalog resync ##
rman log=/u01/bkp/logs/backup_resync.log << EOF
connect catalog rman/rman@rman
connect target /
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u01/bkp/backup/ctrl_%F';
resync catalog;
EOF
and the error on log file "backup_resync.log" getting:
Recovery Manager: Release 11.1.0.6.0 - Production on Fri Aug 10 04:25:04 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: ORCL (DBID=2588904899)
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/10/2012 04:25:29
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
RMAN>
Recovery Manager complete.
plese suggest on this, i googled, saying to register the catalog, tried but no luck....
thanks in ADV
Edited by: DOA on 9 Aug, 2012 10:16 PM
Edited by: DOA on 9 Aug, 2012 10:17 PMHello vreddy,
Thanks for the reply...
I am bit new with the rman word....
I tried command on server where catalog exist (stating: my PROD and catalog exist on different different server)
(orcl is my PROD db name)
rman target / catalog ORCL
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 10 10:57:29 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: RMAN (DBID=1583459273)
recovery catalog database Password:
asking for some password, which password here we need to supply ?
for more clear picture I also execute command on catalog side:
SQL> select name,DBID,RESETLOGS_TIME from rc_database order by 1;
NAME DBID RESETLOGS
PROD 4247251480 12-MAY-04
RMAN 1583455429 02-JAN-09
db ORCL is not there in the list.... -
The server was not found or was not accessible.
I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
I've copied a running web app to this same machine, and opened it in Visual Studio 2012. But when I attempt to run in debug mode, my first attempt to access the database gives me this error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
<add name="EMSDataModelContainer"
connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework""
providerName="System.Data.EntityClient" />
Thanks in advance.Hello,
Please read the following resources:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Report Application Server was not found
Post Author: dgindy
CA Forum: Deployment
Product: Crystal Reports
Version: XI
Patches Applied:
Operating System(s): Windows 2003 Server
Database(s): SQL 2000
Error Messages: " An Enterprise Report Application Server was not found. "Steps to Reproduce:
So we have an existing CR 9 reports application server on a different system . We are trying to migrate over to crystal report 11 with out affecting it. I modified our .Net web application and uploaded it to the server. This is the error I'm currently getting. We have Enterprise XI install on the server so i'm stumped
Any Ideas?
Thanks
DHi Fade,
Ah, the SDK for CR for VS is not what you want. What you need to do is log into Service Market Place and go to the appropriate download section. The SDK is NOT installed as in previous versions with Crystal Reports Designer, it's a separate download now.
I assume you are also using CRSE 2013 then so you get the SDK from SMP:
Then in the list you'll see .NET installer for SP 1 or SP 2, you must use the same patch level as the Server:
If you don't see this option then please contact your account manager to give you access to SMP and the download section.
If you are not set up you will not be able to see the above.
Thanks
Don -
Hi All,
I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
Can anyone guide me what could be the problem.
Date 17/4/2014 2:04:20 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
Date 17/4/2014 2:11:55 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]
Date 7/4/2014 11:00:31 AM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]Check this link
http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
Regards, RSingh -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Managed server is not starting - Upgrading OBIEE from 11.1.1.6.2 to 11.1.1.7
We are in the final stage of the installation.
We are following the steps mentioned in http://www.rittmanmead.com/2013/04/upgrading-obiee-to-11-1-1-7/ .
while running the 'Configuration Assistant' to update the BI domain the Managed server is not getting started.
We are getting issue with SSL hand shake...Can any one help us to resolve this.
===========================
Configuration Assistant Log
===========================
BI Configuration
Log
Config Action BI Configuration started
Executing: opmnctl stopall
Log
Step Executing: opmnctl stopall started
Step Executing: opmnctl stopall ended successfully
Stopping Managed Server: bi_server1
Log
Step Stopping Managed Server: bi_server1 started
Step Stopping Managed Server: bi_server1 ended successfully
Upgrading JRF Shared Libraries
Log
Step Upgrading JRF Shared Libraries started
Step Upgrading JRF Shared Libraries ended successfully
Upgrading OPSS Code Grants
Log
Step Upgrading OPSS Code Grants started
Step Upgrading OPSS Code Grants ended successfully
Upgrading Oracle Business Intelligence Code Grants
Log
Step Upgrading Oracle Business Intelligence Code Grants started
Step Upgrading Oracle Business Intelligence Code Grants ended successfully
Upgrading Non-J2EE Management EAR
Log
Step Upgrading Non-J2EE Management EAR started
Step Upgrading Non-J2EE Management EAR ended successfully
Deploying BI Content Server JEE application
Log
Step Deploying BI Content Server JEE application started
Step Deploying BI Content Server JEE application ended successfully
Deploying BI Composer JEE application
Log
Step Deploying BI Composer JEE application started
Step Deploying BI Composer JEE application ended successfully
Deploying JBIPS JEE application
Log
Step Deploying JBIPS JEE application started
Step Deploying JBIPS JEE application ended successfully
Restarting AdminServer
Log
Step Restarting AdminServer started
Step Restarting AdminServer ended successfully
Starting Managed Server: bi_server1
Error
Failed to achieve state RUNNING in 3600seconds. The server is currently in state SHUTDOWN
Step Starting Managed Server: bi_server1 failed
Configuration Action 'Starting Managed Server: bi_server1' has failed. Please check logs for details.
Step Starting Managed Server: bi_server1 failed
Log
Step Starting Managed Server: bi_server1 started
Step Starting Managed Server: bi_server1 failed
Configuration Action 'Starting Managed Server: bi_server1' has failed. Please check logs for details.
Step Starting Managed Server: bi_server1 failed
Executing: opmnctl startall
Log
Upgrading Oracle Business Intelligence Catalogs
Log
===========================
Dec 13, 2013 9:36:59 AM weblogic.nodemanager.server.Handler run
WARNING: Uncaught exception in server handlerjavax.net.ssl.SSLKeyException: [Sec
urity:090482]BAD_CERTIFICATE alert was received from botd-rptobapp2.devop.vertaf
ore.com - 192.12.12.13. Check the peer to determine why it rejected the certif
icate chain (trusted CA configuration, hostname verification). SSL debug tracing
may be required to determine the exact reason the certificate was rejected.
javax.net.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was receiv
ed from botd.devop.com - 192.12.12.13. Check the peer to d
etermine why it rejected the certificate chain (trusted CA configuration, hostna
me verification). SSL debug tracing may be required to determine the exact reaso
n the certificate was rejected.
Nodemanger.log
<Oct 7, 2013 10:28:35 AM> <INFO> <Loading domains file: c:\oracle\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Oct 7, 2013 10:28:38 AM> <INFO> <Loading identity key store: FileName=c:/oracle/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Oct 7, 2013 10:28:38 AM> <INFO> <Loaded node manager configuration properties from 'c:\oracle\WLSERV~1.3\common\nodemanager\nodemanager.properties'>
<Oct 7, 2013 10:28:38 AM> <INFO> <bifoundation_domain> <bi_server1> <Startup configuration properties loaded from "C:\oracle\user_projects\domains\bifoundation_domain\servers\bi_server1\data\nodemanager\startup.properties">
<Oct 7, 2013 10:28:42 AM> <INFO> <Secure socket listener started on port 9556>
<Oct 7, 2013 10:35:51 AM> <WARNING> <Uncaught exception in server handlerjavax.net.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from botd.devop.com - 192.12.12.13. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
javax.net.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from botd.devop.com - 192.12.12.13. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertReceived(Unknown Source)
at com.certicom.tls.record.alert.AlertHandler.handle(Unknown Source)
at com.certicom.tls.record.alert.AlertHandler.handleAlertMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.ReadHandler.read(Unknown Source)
at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)
Admin server Log
for protocols iiop, t3, ldap, snmp, http.>
<Dec 15, 2013 4:59:29 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.12.12.13
:7002 for protocols iiops, t3s, ldaps, https.>
<Dec 15, 2013 4:59:29 AM PST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for do
main "bifoundation_domain" running in Production Mode>
<Dec 15, 2013 4:59:29 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 15, 2013 4:59:29 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Dec 15, 2013 5:00:12 AM PST> <Notice> <LoggingService> <BEA-320400> <The log file C:\oracle\user_projects\domains\bifou
ndation_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. Thi
s can happen on some platforms like Windows.>
<Dec 15, 2013 5:00:12 AM PST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\oracle\user_pr
ojects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log00002. Log messages will continue to be logge
d in C:\oracle\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log.>
CertPathTrustManagerUtils.certificateCallback: certPathValStype = 0
CertPathTrustManagerUtils.certificateCallback: validateErr = 16
CertPathTrustManagerUtils.certificateCallback: chain[0] = Serial number: -157025747728280783581574168894965558517
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=BOTD-RPTOBAPP2
Not Valid Before:Sun Aug 12 11:27:29 PDT 2012
Not Valid After:Fri Aug 13 11:27:29 PDT 2027
Signature Algorithm:MD5withRSA
==============
Narendar ReddyHi Folks,
Any inputs in the above issue is highly appreciated.
"Error
Failed to achieve state RUNNING in 3600seconds. The server is currently in state SHUTDOWN
Step Starting Managed Server: bi_server1 failed
Configuration Action 'Starting Managed Server: bi_server1' has failed."
Regards,
Aj -
Datasource: ORA-02019: connection description for remote database not found
Hi,
I recently made the datasource to point to a new host, and using the EM console tested the connectivity to the datasource to be successful.
Java code that refers to the DS is also the same as before that was working as only the connection string has been changed, but now trying to access the web-application shows the following error in the logs:
==============
Exception::java.sql.SQLException: ORA-02019: connection description for remote database not found
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:431)
oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:463)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
oracle_jdbc_driver_T4CStatement_Proxy.executeQuery()=====================================
What could be the reason? Is there any other app server datasource related setting that needs to be done or is it some other issue - as I said 'testing the connection from EM console connects successfully'.
Thanks,
Rommel.The issue is resolved now.
One of the queries used a db link that was missing on the new database and therefore the error from the java code.
Since testing for connectivity using DS through EM console does not check for any db link (using the default query it executes) connectivity was successful.
Thank a lot,
Rommel. -
Hi!
Well, one old subject, I recall (had this written here long time ago) -- ZCM 10.3.4, trying to backup db from command-line, but ...
SQL Anywhere Backup Utility Version 10.0.1.3960
Specified database not found
DB is there and accessible and running and ZCC is ok and ZCM does work and db is via Sybase Central accessible etc. and probably when I restart ZCM services on server it will be backed up also with utility, but ... any ideas how to accomplish this wo services restart. Can't dbping server. Server name is also written ok in command etc.
More thanks, Alar.NovAlf,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
Getting Errors while using IMPDP command in UNIX
Hi All, My work involves Refreshing of DB with latest Data. For this i am using IMPDP command to import the data. But Every time during refresh i will get errors saying like "oracle Generated Errors Oracle Not available". I don't know what is the rea
-
My 13 inch Black Macbook purchased in June 2006, just went kabutz, I think it's the logic board, took to apple store, nothing from good battery or from outlet, took the hard drive out and it works fine. opinion seems to be logic board, a small amount
-
How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?
-
Product Costing By Sales Order
Hi all, Would like to check if anyone can explain how the value flow from sales order cost estimate that effects on goods issue and goods receipt in production order, because right now we are having difficulty in situation below: - From RM -> SFG, Ac
-
Third party apps working w/ FCP...
I was planning on taking a motion graphics class to use in conjunction with FCP. Either AfterEffects or Motion. It seems as though a lot of freelancers are requested with AE knowledge. What's the main difference from a video editor's view between (Mo