SCOM 2012 Alerts

Curious as to why in Monitoring - Active Alerts, it shows I have 8 critical but when I go to Monitor - Windows Computers, all my servers are looking good. When I go to Health Explorer on one of the servers that have a critical error, that error is
not showing up.

1) why active alerts has 8 critical alert and windows computer healthy status is good:
a) check whether alert is generated by monitor or rule. If alert is generated by rule, the monitor object health staus does not change.
b) The affected object, which generated alert, does not under windows computer object. e.g. If Active Directory has critial alert, you can see the alert in alert view. However, the Windows computer object may be healthy because Active directory
does not belong to windows computer object and its , AD, healthy status does not roll up to windows computer object.
2) how to know the alert is come from monitor or rule: The alert deatils indicates that whether the alert is generated by monitor or rule
Roger

Similar Messages

SCOM 2012 alerts fine tuning

Hi,
How to fine tune SCOM 2012 alerts we are getting huge amount of alerts , to stop unwanted alerts and how to customised what is being monitored ?
Thanks.

There are a number of posts which provide recommendations.
https://dynamicdatacenter.wordpress.com/tag/scom-alert-tuning/
http://blogs.technet.com/b/kevinholman/archive/2009/12/21/tuning-tip-do-you-have-monitors-constantly-flip-flopping.aspx
You could tackle each alert and tune as you get them but if you want to be more productive run some of the alert reports and have a look at where the noise is coming from. You will probably find a handful of culprits.
Also if your getting a lot of Powershell scrips failing or timing out or wmi failing, these sometimes are just random failures if the server is to busy or backup running or AV. One of the steps I have taken is to make these alerts informational and
then have our operations team check once a day for any problematic servers that are reporting multiple issues or specif scripts failing multiple times.
http://blogs.technet.com/b/kevinholman/archive/2009/06/29/getting-lots-of-script-failed-to-run-alerts-wmi-probe-failed-execution-backward-compatibility-script-error.aspx
Its a big task if this hasn't been actively done and will take some time. (Once it has been done keep reviewing regularly)
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How can I add SCOM 2012 Alert Context within a SCOM Alert When using a cusom powershell script in a two state monitor?

Hello, we have a two state monitor and I would like to channel the Alert Context to Alert Description.
The powershell script being used to find the stopped services is pasted below:
$API = new-object -comObject "MOM.ScriptAPI"
$bag = $api.CreatePropertyBag()
$ServiceStatus = Get-WmiObject -class win32_service |where {$_.startmode -eq'Auto'-and $_.State -eq 'Stopped' -and
$_.name -ne 'wuauserv'}
if (!$ServiceStatus) #if there are no automatic services that are stopped, we are healthy.
write-host "good"
$bag.addvalue("State","good")
if ($servicestatus) #if there are any automatic services that are stopped, we are unhealthy.
write-host "bad"
$bag.addvalue("State","bad")
foreach ($service in $servicestatus) #enumerate the stopped services
$bag.addValue("$($Service.Name):","$($Service.state)")
$bag
$API.Return($BAG)
The results of the services that are stopped are being captured in the Alert Context”. How can I pipe the Alert Context to “Alert Description” to obtain a meaningful alert?
Alert Context data:
Property Name                              Property Value
State
bad
clr_optimization_v4.0.30319_32: Stopped
clr_optimization_v4.0.30319_64: Stopped
How can I pipe to Alert Description in SCOM 2012?
Thanks,
Kapil Dham
Kapil Dham

you don't need write-host
you should create
$bag.addvalue("ServiceName1","StateOK")
$bag.addvalue("ServiceName2","StateStopped")
and in alert description you will see
ServiceName1
StateOK
ServiceName2
StateStopped
So try $bag.addValue($Service.Name,$Service.state)
and $Data/Context/Property$

SCOM 2012 Alerts for Ping Network Device

Hi
I have SCOM 2012 and configure Rule for Ping my Network Device.
My question is, How to Configure Alert for send mail when timeout is detected on Rule?. Step by step documentation? I see tab Alerts on the monitor but Generate Alerts option is greyed out.
thanks.

More info:
How to test email notification settings in Operations Manager
https://support.microsoft.com/kb/934756?wa=wsignin1.0
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev Parambil

Hi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog

Only Alert Data is not being inserted in SCOM 2012 Data Warehouse database

Hi All,
Alert data is not getting inserted into SCOM Data Warehouse database since 10 days though I could see latest Performance data in DW DB. No changes were made as far I know on SCOM servers or DB's. I had this issue few months back
and got resolved by executing a qiery to create an entry for Data Warehouse Synchronisation server entry.
Now I have checked the discovered inventory and could see an entry present and it is healthy. Still, latest Alert data is not getting inserted into DW DB. Please help me out.
http://social.technet.microsoft.com/Forums/en-US/2dac4f45-4911-40dc-a220-702993188832/alert-data-is-not-present-in-scom-2012-data-warehouse-database-since-two-weeks?forum=operationsmanagergeneral
Regards, Suresh

Hi,
Generally, data warehouse store a long-term data, and by default, it would keep 400 days data, I suggest check your configuration:
How to Configure Grooming Settings for the Reporting Data Warehouse Database
http://technet.microsoft.com/en-us/library/hh212806.aspx
Alex Zhao
TechNet Community Support

SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?

Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support

Alert data is not present in SCOM 2012 Data Warehouse database since two weeks

Alert data is not present in SCOM 2012 Data Warehouse database since a week though I could see Performance data for the latest dates. Old Alert data is present but I think the latest Alert data is not being inserted to Data warehouse. No activity was done
on the day from where we are missing data.
I could see 31554 events on all my Management servers and this proves that Data Insertion is happening. I am not sure why only Alert data is missing (or not getting inserted) in DW database. I am trying to use SQL queries to fetch the data as I dont have reporting
currently. The same query is working for other dates, so there is no issue with this query.
I have noticed that I could see the Alert Data present in SCOM OperationsmNager Db but NOT present in OperationsManagerDW database.
In SCOM 2007, data will be inserted in both Ops DB and DW simultaneously. I believe the same methodology in 2012 too.
Please help me to fetch Alert data from DW. Any suggestion pls?
Regards, Suresh

Hi,
Generally, data warehouse store a long-term data, and by default, it would keep 400 days data, I suggest check your configuration:
How to Configure Grooming Settings for the Reporting Data Warehouse Database
http://technet.microsoft.com/en-us/library/hh212806.aspx
Alex Zhao
TechNet Community Support

SCOM 2012 monitoring IIS - windows updates generate SCOM alerts

We are using SCOM 2012 to monitor our environment. There is a logic implemented to suppress alerts (using maintenance mode) when Windows Updates cause system reboot.
We followed:<o:p></o:p>
http://operatingquadrant.com/2009/08/15/scom-automatically-starting-maintenance-mode-when-servers-are-rebooted-for-patching/<o:p></o:p>
Basically when in system event log event id 1074 appears then system is put in Maintenance mode. There is a problem with some IIS web servers - they
generate a lot of alerts when Windows Updates are installed (e.g. Microsoft Windows Internet Information Services 2003 Application Pool is Unavailable)
and before windows reboot. In details:
5:08 AM - Windows update installation in event log (event id 19)e.g.
Installation Successful: Windows successfully installed the following update: Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008 x86 (KB2972106)
5:09 AM - SCOM generates alerts: Microsoft Windows Internet Information Services 2003 Application Pool is Unavailable
5:17 AM - event id 1074: The process winlogon.exe has initiated the restart of computer. SCOM put this server in Maintenance mode.
After 5:17 AM no more alerts generated by SCOM
We cannot change our logic and put system in maintenance mode based on event ID 19 (windows update installation) because there are a
lot of event ID 19 events generated almost every day. So we do not want to put our server in maintenance mode each time when windows updates are installed. Just when windows update installation cause some IIS features stops. Any idea?

For issue 1074, You can refer below link
http://theitcrownd.blogspot.com/2012/01/set-up-automatatic-scom-maintenance.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Orchestrator/SCOM 2012 and UTC Time for Get Alert

We are currently moving to using Orchestrator to act as a connector between SCOM 2012 and Unicenter for ticket generation. Right now, the runbook that I have built out does the following.
Monitor Date/Time > Format Date/Time > Get Alert
The monitor Date/Time runs every 60 seconds.
Format Date/Time then pulls from a variable that grabs the current time using now(). I then have it adding 4 hours and 55 minutes to the time to set the UTC time to 5 minutes earlier.
Get Alert then looks for all alerts that meet a specific criteria. This includes the time and any alert that was generated within the last 5 minutes, which is why I have it currently set to 4 hours and 55 minutes.
In a few months, that's going to break and I'll have to manually update the format date/time to 5 hours and 55 minutes. What I'm trying to find is a way to do this automatically so the runbook doesn't have to be modified. I'm thinking of using
the 'Activity End Time in UTC' from the Monitor Date/Time but want to see if there's any other easier way of doing it.

Hi again,
If the question is to have a an easy way to get only Alerts not already seen with "Get Alert" before:
Use "Update Alert" and update fields like TicketID or ResoultionState after "Get Alert" and exclude this criteria in the Filter tab of "Get Alert" ...
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Exchange 2013 CU2, Alert for OWA Health set unhealthy from SCOM 2012

I am facing issue in Exchange 2013 CU2, I got this alert from SCOM 2012 atleast 5-6 times a day, OWA health set is unhealthy, I have done all the steps mentioned in this web link. Authentication type for OWA Virtual directory is integrated windows and Basic.
I have 2 CAS servers, and this alert generated from both of them.
http://technet.microsoft.com/en-us/library/ms.exch.scom.OWA(EXCHG.150).aspx?v=15.0.712.24
Alert: Health Set unhealthy
Source: EX-CAS - OWA
Path: EX-CAS;EX-CAS
Last modified by: System
Last modified time: 1/5/2014 8:15:08 PM
Alert description: Outlook Web Access logon is failing on ClientAccess server EX-CAS.
Availability has dropped to 0%. You can find protocol level traces for the failures on C:\Program Files\Microsoft\Exchange Server\V15\Logging\Monitoring\OWA\ClientAccessProbe.
Incident start time: 1/6/2014 4:05:08 AM
Last failed result:
Failing Component - Owa
Failure Reason - CafeFailure
Exception:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Failure source: Owa
Failure reason: CafeFailure
Failing component:Owa
Exception hint: CafeErrorPage: CafeFailure Unauthorized Inner exception: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
---> Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseExceptionAnalyzer.Analyze(TestId currentTestStep, HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, Action`1 trackingDelegate)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.AnalyzeResponse[T](HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndSend[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse, Boolean fireResponseReceivedEvent)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndGet[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
   at Microsoft.Exchange.Net.MonitoringWebClient.Authenticate.AuthenticationResponseReceived(IAsyncResult result)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
   at Microsoft.Exchange.Net.MonitoringWebClient.Owa.OwaLogin.AuthenticationCompleted(IAsyncResult result)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
   at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Bool
States of all monitors within the health set:
Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'EX-CAS' -HealthSet 'OWA'
State
Name
TargetResource                     HealthSet
AlertValue     ServerComponent
NotApplicable       OwaCtpMonitor
OWA
Unhealthy      None
States of all health sets:
Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX-CAS'
State
HealthSet
AlertValue     LastTransitionTime
MonitorCount
NotApplicable       ActiveSync
Healthy        1/3/2014 5:21:13 AM
2
NotApplicable       AD
Healthy        11/24/2013 6:54:18 AM
10
NotApplicable       ECP
Healthy        1/5/2014 3:03:05 AM
1
Online
Autodiscover.Proxy
Healthy        11/20/2013 10:06:37 AM
1
NotApplicable       Autodiscover
Healthy        1/3/2014 10:18:17 PM
2
Online
ActiveSync.Proxy
Healthy        11/20/2013 10:06:37 AM
1
Online
ECP.Proxy
    Healthy
11/21/2013 6:16:08 PM    4
Online
EWS.Proxy
Healthy        11/20/2013 10:06:37 AM
1
Online
OutlookMapi.Proxy
Healthy        11/24/2013 6:54:28 AM
4
Online
OAB.Proxy
Healthy        11/19/2013 7:14:34 PM
1
Online
OWA.Proxy
Healthy        11/20/2013 10:06:37 AM
2
NotApplicable       EDS
Healthy        1/3/2014 5:19:56 AM
10
Online
RPS.Proxy
Healthy        1/3/2014 5:21:27 AM
13
Online
RWS.Proxy                     Healthy
1/3/2014 5:20:09 AM      10
Online
Outlook.Proxy
Healthy        1/3/2014 5:21:12 AM
4
NotApplicable       EWS
Healthy        1/3/2014 10:18:17 PM
2
Online
FrontendTransport
Healthy        1/5/2014 3:47:09 AM
11
Online
HubTransport
Healthy        1/5/2014 3:47:09 AM
29
NotApplicable       Monitoring
Unhealthy      1/5/2014 4:05:57 AM
9
NotApplicable       DataProtection
Healthy        1/3/2014 5:25:42 AM
1
NotApplicable       Network                       Healthy
1/4/2014 1:51:16 PM      1
NotApplicable       OWA
Unhealthy      1/5/2014 8:05:08 PM
1
NotApplicable       FIPS
Healthy        1/3/2014 5:21:12 AM
3
Online
Transport
Healthy        1/5/2014 4:11:00 AM
9
NotApplicable       RPS
Healthy        11/20/2013 10:07:12 AM
2
NotApplicable       Compliance
Healthy        11/20/2013 10:08:10 AM
2
NotApplicable       Outlook
Healthy        11/21/2013 6:12:54 PM
2
Online
UM.CallRouter
Healthy        1/5/2014 3:47:10 AM
7
NotApplicable       UserThrottling
Healthy        1/5/2014 4:16:42 AM
7
NotApplicable       Search
                Healthy
11/24/2013 6:55:06 AM    9
NotApplicable       AntiSpam
Healthy        1/3/2014 5:16:43 AM
3
NotApplicable       Security
Healthy        1/3/2014 5:19:28 AM
3
NotApplicable       IMAP.Protocol
Healthy        1/3/2014 5:21:14 AM
3
NotApplicable       Datamining
Healthy        1/3/2014 5:18:34 AM
3
NotApplicable       Provisioning
Healthy        1/3/2014 5:19:56 AM
3
NotApplicable       POP.Protocol
Healthy        1/3/2014 5:20:44 AM
3
NotApplicable       Outlook.Protocol
Healthy        1/3/2014 5:19:46 AM
3
NotApplicable       ProcessIsolation
Healthy        1/3/2014 5:19:26 AM
9
NotApplicable       Store
Healthy       1/3/2014 5:20:38 AM
6
NotApplicable       TransportSync
Healthy        11/24/2013 6:53:09 AM
3
NotApplicable       MailboxTransport
Healthy        1/3/2014 5:21:11 AM
6
NotApplicable       EventAssistants
Healthy        11/21/2013 6:22:01 PM
2
NotApplicable       MRS
Healthy        1/3/2014 5:20:29 AM
3
NotApplicable       MessageTracing
Healthy        1/3/2014 5:18:15 AM
3
NotApplicable       CentralAdmin
Healthy        1/3/2014 5:17:25 AM
3
NotApplicable       UM.Protocol
Healthy        1/3/2014 5:17:08 AM
3
NotApplicable       Autodiscover.Protocol
Healthy        1/3/2014 5:17:13 AM
3
NotApplicable       OAB
Healthy        1/3/2014 5:20:51 AM
3
NotApplicable       OWA.Protocol
Healthy        1/3/2014 5:20:52 AM
3
NotApplicable       Calendaring
Healthy        11/24/2013 6:56:59 AM
3
NotApplicable       PushNotifications.Protocol
Healthy        11/21/2013 6:16:05 PM
3
NotApplicable       EWS.Protocol
Healthy        1/3/2014 5:19:07 AM
3
NotApplicable       ActiveSync.Protocol
         Healthy
1/3/2014 5:20:16 AM      3
NotApplicable       RemoteMonitoring
Healthy        1/5/2014 3:47:09 AM
3
Any solution for this alert, how to rectify it, but OWA is running perfect for all users.

Hi,
Sorry for the late reply.
Do we have Exchange 2010 coexistence?
If it is the case, I know the following known issue:
Release Notes for Exchange 2013
http://technet.microsoft.com/en-us/library/jj150489%28v=exchg.150%29.aspx
Please note the "Exchange 2010 coexistence" session.
If it is not related to our problem, please check the IIS log.
If there is any detailed error code, like 401.1, 401.2, please let me know.
Hope it is helpful
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

SCOM 2012 Web Transaction alerting after second bad poll

I'm trying to create a synthetic web transaction that will raise an alert after the second bad occurrence. Anybody have any idea as to how to accomplish this to filter hair trigger errors.

More info:
SCOM 2012 - Monitoring the System Center 2012 App Controller Website
http://kevingreeneitblog.blogspot.com/2012/01/scom-2012-monitoring-system-center-2012.html
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCOM 2012 Closed and Open Alert Reports

Dear all,
In SCOM 2012 R2 how to Generate a report that contain open and closed alerts for past 24 hours. Is there any inbuild report ?
Thanks,
Sengottuvel M

Yes, you can this with Report "Alerts" (http://technet.microsoft.com/en-us/library/hh212929.aspx)
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

How to disable an alert for specific time period in SCOM 2012 R2

Hello,
Is there any option to disable an alert for specific time period in SCOM 2012 R2
Regards,
angs

No. But you can use the scheduler module in your rule or monitor, which will dictate when the workflow will actively run on the agent - hence disabling alerting for that time period.
http://msdn.microsoft.com/en-us/library/ff453828.aspx
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

SCOM 2012 SMS Alert Notification

Hi,
I am using SCOM 2012 and I have a requirement of SMS Alert. but the issue that I am facing here is I have a Single Virtual Box for SCOM 2012, and what ever I experienced from SCOM 2007 physical was I had to configure a Modem through the USB device
few years back..
now I have to configure the SMS notification on a Virtual Box of SCOM 2012...
any idea ? what could be done ?
Regards, Owais

Hi,
I think you need to make the SMS modem work with the virtual machine first. Then, configure the notification in SCOM consol.
How to Enable a Text Message (SMS) Notification Channel
http://technet.microsoft.com/en-us/library/hh212811.aspx
Thanks.
Nicholas Li
TechNet Community Support

SCOM 2012 Alerts

Similar Messages

Maybe you are looking for