SCOM 2012: An account failed to log on. EventID 4625

I don't no, why my service account failed to log on to the reporting service. Username and password are correct.
Account For Which Logon Failed:
   Security ID:       NULL SID
   Account Name:       svcSCOM
   Account Domain:        12345
Failure Information:
   Failure Reason:       Unknown user name or bad password.
   Status:           0xc000006d
   Sub Status:       0xc000006a
Process Information:
   Caller Process ID:   0xb34
   Caller Process Name:   C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\bin\ReportingServicesService.exe
The SQL Services on this server are running this account without errors. It doesn't matter if I choose local system account or my scom service account.
Any help is appreciated :-)
Best regards,
Daniel

Hi,
According to the error message and its sub status, it seems like that user name is correct but the password is wrong.
I would like to suggest you reset the account password and re-enter it for all those services that run under the account.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

An account failed to log on unknown username or password. Causing Login audit failures

I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self. It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
non of them are using any special user accounts. I have used MS network monitor and can't find anything helpful to lead to the issue. All computers in the network are running Windows 7. The domain functional level is 2008 R2.
I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3. I have includes the events below. I need to figure what is causing the audit failures as my GFI Test Hacker alert is
catching it every morning. Disabling the Test Hacker alert is not a option. I have used Process Explorer also but can't seem to pin it down. I also enabled Kerberos logging.
http://support.microsoft.com/kb/262177?wa=wsignin1.0. All event codes state its a unknown or no existing account but how do I stop it from happening?
This is from the System Event log
A Kerberos Error Message was received:
on logon session TH.LOCAL\thsbs11e$
Client Time:
Server Time: 14:59:53.0000 3/4/2014 Z
Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
Extended Error:
Client Realm:
Client Name:
Server Realm: TH.LOCAL
Server Name: krbtgt/TH.LOCAL
Target Name: krbtgt/[email protected]
Error Text:
File: e
Line: 9fe
Error Data is in record data.
This is from the Security Event log
A Kerberos authentication ticket (TGT) was requested.
Account Information:
Account Name: S-1-5-21-687067891-4024245798-968362083-1000
Supplied Realm Name: TH.LOCAL
User ID: NULL SID
Service Information:
Service Name: krbtgt/TH.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: 0xffffffff
Pre-Authentication Type: -
Certificate Information:
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:
Certificate information is only provided if a certificate was used for pre-authentication.
Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
I then get teh following error in the next event
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: THSBS11E$
Account Domain: TH
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x25c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: THSBS11E
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

Well I opened the case for him and he never followed up with Microsoft :-(
It's a kerberos issue, we're told to ignore it. Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better? I can tell you it's normal with Essentials but not the exact technical reason it's
happening.
Unfortunately TechNet isn't coming back, sorry folks :-(

SCOM 2012 SP1 is failing to install - SQL not compatible

I'm getting an error when installing SCOM 2012 SP1 stating the SQL is not supported. I have seen a few posts on the forum about this error message but so far none of the resolutions resolved my issue.
Using named instance on port 2433. Entering SQL\instance and port 2433 yields same message as seen in another post:
"The installed version of SQL server is not supported. Verify that the computer and installed version of SQL Server meet the minimum requirements for installation. Please see the Supported Configurations document for further information."
I noticed I get this in my OpsMgrSetupWizard.log
[15:03:28]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[15:03:28]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
Notice the last line - IsSQLOnAValidComputer is null/empty. The solutions I found are to open the ports between these servers but the SQL server and SCOM server are on the same network - no firewall between them. The registry key for domain firewall
policy to 'EnableFirewall' is 0. The firewall service is disabled on both machines.
I am running the installation as a domain service account - for the DAA. It has local admin on the SQL and SCOM server. It has sysadmin DB access to the instance.
SCOM Server:
Server 2008 R2 Standard SP1
SQL Server:
Server 2008 R2 Enterprise SP1 | SQL 2012 RM 64-bit version 11.0.2100.60
Any help is greatly appreciated.

Glad to hear the issue has been resolved. Thanks for the update.
Niki Han
TechNet Community Support

SCOM 2012 SP1 Installation failed

Hello,
I´m experiencing problems installing operations manager and I need some help. I´m trying to do this type of installation:
Two servers: One for bbdd and reporting and the other one for Management Server and Web Console server.
2 server have windows 2012 std installed full patched one of them with sql server 2012.
When doing management and web console server installation I get an error and cannot continue, i paste some of the show on the OpsMgrSetupWizard.log:
Error:   :Error:User did not accept EULA.
Error:   :Error:IsReportingValidToInstall failed SRS instance not provided
Error:   :No Management Server property was provided and Setup could not find a valid Management Server. Please rerun setup with a valid management server.
Error:   :The management server specified would lead to an invalid scenario. Setup will attempt to find a valid scenario mgt server.
Error:   :CheckForConflictingSqlDatabases: Found a database with the name ReportServer$OPERATIONS in this instance.
Error:   :Error:Failed to log in with account GES-SIEMSA\.....
Error:   :ImportManagementPack: MP already imported so skip : E:\Setup\AMD64\..\..\ManagementPacks\Microsoft.SystemCenter.ApplicationMonitoring.360.Template.Library.mp
Warn:   :Warning:Failed to connect to local SDK in attempt number: 1. Error Message while connecting to SDK: The Data Access service is either not running or not yet initialized. Check the event log for more information. InnerException Details:
No se pudo conectar a net.tcp://......-domain:5724/DispatcherService. La duración del intento de conexión fue de 00:00:02.1159125. Código de error TCP 10061: No se puede establecer una conexión ya que el equipo de destino denegó expresamente dicha conexión
192.168.69.116:5724.
Error:   :Exception running sql string
Error de CREATE DATABASE. No se pueden crear algunos de los archivos de la lista. Consulte los errores relacionados.
Error:   :FATAL ACTION: CreateDataWarehouse
Error:   :FATAL ACTION: DWInstallActionsPostProcessor
Error:   :ProcessInstalls: Running the PostProcessDelegate returned false.
THANKS IN ADVANCE !!!!

Ok and I suppose that you check the box to accept the license?
The communication with the SQL Server is ok? Firewall port are opened?

SCOM 2012 ACS agent Failed connecting to collector

Hi,
We are using SCOM 2012 on Windows 2012, when installing the SCOM agent with Audit Collection Services the ACS forwarder will report in as healthy until reboot, after reboot the forwarder state changes to failed to connect to collector. (XXX's are redacted
system information).
Forwarder unsuccessfully tried to connect to the following collector(s): XXXXXXXX:51909, status: 0x80090322 (TCP connect), source: registry addresses tried: XXX.XXX.XXX.XXX:51909 If the list of collectors is blank, then AdtAgent was unable to locate a collector.
Common reasons for this message are: The machine(s) listed is not online AdtServer is not running on the machine(s) listed AdtServer on the machine(s) listed is not listening on the specified port TCP connectivity to the AdtServer machine is blocked by firewall,
IPSec, or other filtering mechanism AdtServer on the machine(s) listed actively refused the connection (due to policy or current activity load) For detailed failure information, enable trace logging using the TraceFlags registry key and examine the AdtAgent.log
in the \temp subdirectory of the Windows directory.
Enabling trace logging repeats the same error, unable to connect to server. We have verified, the IP is correct, the FQDN is correct and has a forward and reverse lookup record. We have also verified via telnet that port 51909 is open in both directions.
Any help would be appreciated.

If you are 100% sure port 51909 is open at Collector's side (you don't need to open it on ACS forwarder) and there's no additional firewall somewhere at the middle use wireshark and capture what's going on.
--- Jeff (Netwrix)

SCOM 2012 Operations Manager Failed to start a process

We have recently upgraded from SCOM 2007 to SCOM 2012. We are not getting a great deal of “Operations Manager Failed to start a process”. The process varies including:
DiscoverSQL2008ASDiscovery.vbs
DiscoverSQL2008DBEngineDiscovery.vbs
DiscoverSQL2008ASDiscovery.vbs
Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs
I have researched and researched. I know that you can try to run the scripts locally on the machine but it seems the scripts never make it to the machine. I go to the path in the error, no luck. I look in the other folders as I know that SCOM moves the scripts,
and I even search the entire C drive but the scripts are not getting to the server. The folder is not even making it. For example:
Command executed: "C:\Windows\system32\cscript.exe" /nologo "Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs" SERVER true Working Directory: C:\Program Files\System Center Operations Manager\Agent\Health Service State\Monitoring
Host Temporary Files 11606\1759\
The script is not there and the folder \1759 is not there either.
I have removed and reinstalled the client.
Antivirus is fine, up to date and not blocking on any of the machines.
I have stopped the “System Center Management service” and renamed the “Health Service State” folder and it recreates fine but not long after I get the warning in SCOM about “Operations Manager Failed to start a process”.
I look in event viewer for Operations Manager on this particular one and I see a lot of:
Performance data from the Health Service could not be collected since required registry keys could not be read, the error was 2L (The system cannot find the file specified.). Event ID 6001.
I tried the fix of
"lodctr MOMConnectorCounters.ini" and "lodctr HealthServiceCounters.ini" but I get “error
encountered while updating text in registry. Status: 0”. Again I am using SCOM 2012.
Do I need to look at each failed script or is there a overall issue because the scripts are not making it to the machines. Any ideas?

I guess you might need to run "mofcomp sqlmgmproviderxpsp2up.mof".
Thanks, S K Agrawal

Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
Mike

Hi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support

SCOM 2012 SDK account and SPN

Hi All,
we have SCOMSDK account can any one tell me is something i need to do with SPN. if yes what i have to do . Please help

Hi,
Please have a look on this!
http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch

Errors installing SCOM 2012 Reporting Services

I've run into an issue installing SCOM2012 Reporting Services, that I can't seem to figure out. I installed SQL Server 2008 R2 SP2 SSRS local to the SCOM server using an instance name of SCOM. I created the databases for this on another server (SQL server
2008 R2 SP2) during the SSRS configuration. All from SSRS looks fine, and shows the scale out join, all good. I can browse to the reports page, add folders, all that normal stuff. I added the domain\datareader and datawriter accounts as SSRS admins in the
site security, as well as ensured they are sysadmin in SQL, and local admins on the SQL and SCOM servers. So, all looks good. Until I go to add reporting services to SCOM 2012. It fails to complete, and the log shows:
[12:28:36]: Warn: :Message:SRSPolicySetter SoapException Exception: System.Web.Services.Protocols.SoapException: An error occurred when invoking the authorization extension. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException:
An error occurred when invoking the authorization extension. ---> System.ServiceModel.FaultException`1[[Microsoft.EnterpriseManagement.Common.UnauthorizedAccessMonitoringException, Microsoft.EnterpriseManagement.OperationsManager.Common, Version=7.0.5000.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: The creator of this fault did not specify a Reason.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetRoleProperties(String Name, Task[]& Tasks, String& Description)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetRoleProperties(String Name, Task[]& Tasks, String& Description). Will retry..
I then look in the SSRS logs, and see:
library!ReportServer_0-1!89c!08/12/2013-12:28:34:: Call to GetRolePropertiesAction(Browser).
library!ReportServer_0-1!89c!08/12/2013-12:28:36:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: , Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: An error occurred when
invoking the authorization extension. ---> System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnauthorizedAccessMonitoringException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UnauthorizedAccessMonitoringException:
The user domain\DataReader does not have sufficient permission to perform the operation.).
So, I'm at a loss. That user is a sysadmin in SQL, has been added to the SSRS security for site and folder with full permissions, has been added to the SSRS databases specifically, and is a local administrator on both the SSRS/SCOM server and the SQL server.
What am I missing here folks? The SSRS is then completely hosed, and no longer works either. So, I have to uninstall and reinstall to even try again. This is getting frustrating.
Please help! :)
Thanks in advance,
mpleaf

After many google searches, and a lot of security changes, I think I found the right now that finally cured the issue. I had to add my datareader account to the Operations Manager Administrators in SCOM User Roles, and then it seemed to go through just fine.
mpleaf

SCOM 2012 Probe for Omnibus (Netcool)

Hi Team,
One of my client is using SCOM 2012
I have asked customer if they use a load balancing solution and they answered that
no:
if the RMS fails the system will switch to the next MS “in line” (let’s call it MS2) and when the RMS will finish rebooting (all 3 MSs, RMS and the other two MSs in the solution, work on virtual
machines and rebooting them will take one minute, or something like that) then it will become the active MS/RMS (a failback configuration).
If MS2 will fail (while the RMS is still down) then the third MS (MS3) will become the active one; if MS2 (or RMS) will recover then the active MS will be MS2 (or RMS).
Q1: That means Customer Configured Cluster Failover ? any specific ?
If yes. Do we have any Cluster IP which connect to Active MS (Actually SCOM Probe needs to be connected to MS)
Q2 : When Primary MS 1 goes down.. how Operator will see events from Which MS ? (Is Operational console will be installed on MS* also) ?
Q 3: So if there one connector to MS1 and a second connector on MS2, both MS on the same management group, and configured to get the same group of alarms (for example ResolutionState = 0
(New) ) then the two connectors will be in a race condition: each connector will receive different alarms because the alarms are stored in the same database (and not on the MS itself).
Is my understanding correct?
Thanks
Sekhar

Please check this:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ab30c52f-7b61-40fd-9845-6cb0caa7a396/how-does-an-scom-agent-know-what-failover-management-servers-are-available
http://vmajmudar.blogspot.in/2013/07/scom-2012-rms-emulator-fail-over.html
Hope it helps !!

NULL SID Security Log Event ID 4625 when attempting logon to 2008 R2 Remote Desktop Session Host

This is a new deployment of Server 2008 R2 in a newly created 08 R2 active directory on a newlyt installed 08 R2 RDSH server.
A new generic user is created in AD. That user can log on to the terminal server on the console just fine. But that user cannot logon via RDP. Furthermore, the domain admin credentials also cannot logon via RDP.
When either set of credentials is used, the logon attempt registered in the Windows Security Even Log as a denied attempt with Event ID 4625 reporting a NULL SID.
Troubleshooting: The RDSH has already been disjoined and rejoined to the domain. Also, curious note, there are three ways to save the user account on the RDSH server as a valid user account which has permissions to logon. The one Microsoft recommends is to open computer management and edit the remote desktop users group. When I the accounts here and click apply, they immediately dissapear. Secondly, I can open the computer properties and go to the remote tab. There I find the user accounts added using the previous method are enumerated but not displaying correctly. They show up with the RDSH server name and a question mark. The last way, is to open the Remote Desktop Session Configuration tool and edit the properties of the rdp connection and go to the security tab. This was the only place I could get a user to ‘stick’ but the logon attempts still show a NULL SID and access is denied.
I have scoured every bit of RDS documenation I can find with no luck.
Thanks,
Chris

I am also experiencing this issue.
2008 servers, 2007 exchange on server 2008.
These are fresh servers, fresh AD. Users can log onto domain normally, RDP not working for admin accounts, generating same errors as posted above.
The bigger issue, is that we have a cisco messaging service account that is generating this error on the DC's and the Exchange server as well. The service basically emails users voicemails to their inbox. The user we've created for the cisco service is unable
to authenticate to the exchange server, in turn generating the same errors posted above as well. We can log on to the domain with this account just fine.
Any ideas on this? We have not tried re-adding the servers to the domain.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 5/5/2010 9:01:13 AM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: xx.corp
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
   Account Name: -
   Account Domain: -
   Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
   Security ID: NULL SID
   Account Name:
xxxx
   Account Domain:
xxxx
Failure Information:
   Failure Reason: Domain sid inconsistent.
   Status: 0xc000006d
   Sub Status: 0xc000019b
Process Information:
   Caller Process ID: 0x0
   Caller Process Name: -
Network Information:
   Workstation Name: laptop
   Source Network Address: -
   Source Port: -
Detailed Authentication Information:
   Logon Process: NtLmSsp
   Authentication Package: NTLM
   Transited Services: -
   Package Name (NTLM only): -
   Key Length: 0

SCOM 2012 Installation fails while deploying Datawarehouse

Hi All,
I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
Screenshots:
Error logs
Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:08:57]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:08:57]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:08:57]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:08:57]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:08:57]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:08:57]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:17]: Info:
:Info:trying to connect with server My management server
[01:09:26]: Info:
:Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
[01:09:26]: Error:
:Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
Check the event log for more information.
[01:09:26]: Error:
:StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:09:26]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:09:26]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:09:26]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:09:26]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:09:26]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:09:26]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:46]: Error:
:Error:Could not connect to management group. Can not continue with DW upgrade...
[01:09:46]: Info:
:Info:got MG connection
[01:09:46]: Error:
:Error:Could not connect to management group. Cannot continue with current action...
[01:09:46]: Error:
:FATAL ACTION: GetManagementGroup
[01:09:46]: Error:
:FATAL ACTION: DWInstallActionsPostProcessor
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate returned false.
[01:09:46]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[01:09:46]: Info:
:SetProgressScreen: FinishMinorStep.
[01:09:46]: Always:
:!***** Installing: OMCONSOLE ***
[01:09:46]: Info:
:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[01:09:46]: Always:
[01:09:46]: Always:
:****Starting*RollBack*******************************************
[01:09:46]: Always:
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Debug:
:ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor. Launching it now.
[01:09:46]: Always:
:Determining actions to be run.
[01:09:46]: Always:
:Done validating action list; now running individual actions.
[01:09:46]: Always:
:Current Action: UninstallPrePreprocessor
[01:09:46]: Info:
:UninstallPrePreprocessor completed.
[01:09:46]: Always:
:Current Action: UpgradePreprocessor
[01:09:46]: Info:
:UpgradePreprocessor completed.
[01:09:46]: Always:
:LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:
[01:09:46]: Info:
:SetProgressScreen: Init Exe Install progress.
[01:09:47]: Always:
:LaunchExeSetup: Install return value was: 0
[01:09:47]: Info:
:CheckPointPassed is removing the Rollback property as this is an uninstall.
[01:09:47]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
Gautam.75801

Hi All,
So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
Legend: SCOM Server - SCOMSVR.Contoso.com
DNS Domain: Contoso.com
SDK Account: SDKSVC
To add SPN for the SDK Service:
===================================
In Win2k 12
setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
In Win2k8
setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
To verify the SPN's
============================
1. setspn -L MS Host name without FQDN
Ex: setspn -L SCOMSVR
2. setspn -L Domain\DSK Action account
Ex: setspn -L Contoso\SDKSVC
Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
Example: The below entry should not appear when you enter setspn -L SCOMSVR
MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
Ex: MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR
To delete a SPN if required:
===============================
setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Gautam.75801

SCOM 2012 Reporting Fails During Install

I am having issues installing the Reporting Module for SCOM 2012. Here is my environment:
Stand-alone SQL server with SQL 2012 (Default Instance and only is used for SCOM)
Reporting Services Installed and I am able to browse to the URL
Reader Account has access to both servers and both Report/OPM databases.
Stand-alone Management Server
Everything is running fine.
When I go to install Reporting on the SQL Server it fails during the Configuring Security phase and here are the logs:
Error:All retrys failed!!. Message:SetSRSSecurity Exception, now throwing:Cannot stop ReportServer service on computer '.'.
Error: :SetSRSSecurity failed: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message: Cannot stop ReportServer service on computer '.'.

I also see this error:
[12:50:50]: Error:
:StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[12:50:50]: Warn:
:Message:SetSRSSecurity Exception Exception: The specified @job_name ('F5DDC431-93E3-41CF-8913-00EDFD457F99') does not exist.
The specified @job_name ('3AA30844-4417-479D-80EF-059C9CAAF84D') does not exist.
The specified @job_name ('A65C33A6-DC11-44AA-B8AD-077A7D94213D') does not exist.
The specified @job_name ('C9192EB7-87D8-475D-9826-100AF193F33F') does not exist.
The specified @job_name ('410DA81B-318F-4BD8-AA5B-14AC61AC82C3') does not exist.
The specified @job_name ('E26B57B7-72CE-449F-AA19-19B192CD10C0') does not exist.
The specified @job_name ('FF9BC31C-E6F9-4987-ABBC-1C20D41E0A7D') does not exist.
The specified @job_name ('BBE14DB5-E183-4F05-AC45-1CD147DD72BE') does not exist.
The specified @job_name ('D69172E5-4FD6-4FF2-9F98-1FA57C98B6B5') does not exist.
The specified @job_name ('566D3953-B305-43EC-9C08-2FA53CABA2FE') does not exist.
The specified @job_name ('B3D9B9B3-9C8A-4109-884B-36899D560A9B') does not exist.
The specified @job_name ('B47669F4-54A5-4F78-AEF4-40A9F40D9BC6') does not exist.
The specified @job_name ('97FA149B-5275-4A4D-A3C8-4E69B20C0D92') does not exist.
The specified @job_name ('86AEBFB5-CAA3-4D2A-859F-4E751B660257') does not exist.
The specified @job_name ('FE970B3F-D021-46A2-8387-4E989590A86D') does not exist.
The specified @job_name ('D6C2E45D-E677-4F2B-81AA-5103FB8E1B92') does not exist.
The specified @job_name ('7412F626-CAD9-48BE-8211-5145A3F51085') does not exist.
The specified @job_name ('17838236-691B-49D7-AD7C-553B1886AB58') does not exist.
The specified @job_name ('5445E14F-A22C-4014-9EB8-55C8BAF5A061') does not exist.
The specified @job_name ('C914C932-C350-404D-9CF4-575D108DDA82') does not exist.
The specified @job_name ('CB87B0AD-069A-4F07-BB62-580FBEF5C31B') does not exist.
The specified @job_name ('BC838396-DFE1-4BC5-8D24-58B194A7214E') does not exist.
The specified @job_name ('D58C71E8-A821-4A73-A0A7-5F5080BC6730') does not exist.
The specified @job_name ('49F42A35-15DA-4C9E-A95B-66F4040E139F') does not exist.
The specified @job_name ('F4F9400D-1212-4DD6-AAFF-671192BF2B25') does not exist.
The specified @job_name ('F0EFEFAA-F2D5-494E-B97E-6D075AC17F2F') does not exist.
The specified @job_name ('0721E6DF-0209-4874-B473-70E5026E8FF2') does not exist.
The specified @job_name ('B2AECE06-0F8F-4C5D-A04E-8148D8F6C255') does not exist.
The specified @job_name ('A9813C14-FB76-4461-80B9-8350CBE9E5BB') does not exist.
The specified @job_name ('71ABB496-3F2E-4D8D-8551-8650DBC45721') does not exist.
The specified @job_name ('EF1AAD40-47DA-41A2-A9F6-87A6AE140BB3') does not exist.
The specified @job_name ('B887666E-E580-427C-ADBA-8B605561E8E9') does not exist.
The specified @job_name ('A19772C9-CA88-455C-9CA7-8E11F960BB84') does not exist.
The specified @job_name ('CAFFEA4E-AE64-4B5F-9129-913272C5251D') does not exist.
The specified @job_name ('826AF562-C9D2-461B-AEEB-91B64FF3003A') does not exist.
The specified @job_name ('09458F97-C2ED-46B5-BB8E-91C4C54C22B4') does not exist.
The specified @job_name ('021AA26B-62EA-4C38-8ACF-975CE6B33FAD') does not exist.
The specified @job_name ('33EA5BB5-35A7-442F-8635-9FE560EDABBE') does not exist.
The specified @job_name ('E7405185-56A5-4C46-87AB-A1FA9FA4271B') does not exist.
The specified @job_name ('CEDDD21A-2E75-4BA6-BA99-A4E5B79073BC') does not exist.
The specified @job_name ('8A6E115B-616F-46D6-9A94-A7C22C94D11C') does not exist.
The specified @job_name ('30A0182B-0A70-4D33-A62F-AB277ABC4D63') does not exist.
The specified @job_name ('5B252CA0-FCFF-49FA-8B40-AD6667B345A1') does not exist.
The specified @job_name ('D0007E85-046E-4264-933A-AF662B8FECF7') does not exist.
The specified @job_name ('D1835177-4454-44C0-8134-B080AFD99B52') does not exist.
The specified @job_name ('B02F7A14-A658-420D-A2B0-B18577080FDD') does not exist.
The specified @job_name ('7CD641D9-C2C3-4907-88F9-BAED4FA93AAF') does not exist.
The specified @job_name ('23241CD1-4317-42EA-887E-C3F7441645D7') does not exist.
The specified @job_name ('9AB583BC-94AA-49BB-B4E4-CACE094A2764') does not exist.
The specified @job_name ('31EAC604-0DF5-4A9C-B510-CD6BEF72B608') does not exist.
The specified @job_name ('8412C87D-CC61-4FA0-9804-CFC8528DB66E') does not exist.
The specified @job_name ('314FBBDC-013B-4742-B65B-D122968AF014') does not exist.
The specified @job_name ('002B780F-351F-4345-9D97-D3DD370E2317') does not exist.
The specified @job_name ('F21C6C3D-5219-4917-BF29-D5AA1B315565') does not exist.
The specified @job_name ('34FCE497-498B-47EE-9A8B-D8EC2CFEC3AA') does not exist.
The specified @job_name ('1B356BC7-8300-4A6A-8E66-E036C1053C47') does not exist.
The specified @job_name ('6C94A462-3025-46AC-BD67-E7575ABBA4D9') does not exist.
The specified @job_name ('A79F3134-A3BC-470F-8D6C-F457C6114EBA') does not exist.

SCOM 2012 SP1 failed to send notifications by IM Channel

Hello, I have a problem with my SCOM 2012 SP1. When it tries to send notification by IM Channel I get the following alert in SCOM:
Notification subsystem failed to send notification using
device/server 'live.august.ru:5060' over 'sip' protocol to
'sip:[email protected]'.
Microsoft.Rtc.Signaling.OperationFailureException: The GetInbandDataAsyncResult
operation has failed with message: "The data session subscription to server
failed.". See the InnerException and FailureReason properties as well as the
logs for additional information. . Rule id:
Subscription077dc311_59c0_4ba5_a432_072b486cd287
At the same time the following event in the Application Event Log generates on the server with IM service:
Event Type: Warning
Event Source: Live Communications Server Authentication
Event Category: (1003)
Event ID: 16435
User: N/A
Computer: LCS
Description:
At least one invalid authentication signature was detected.
There were 2 messages with invalid signatures in the last 7112 minutes. The last one had the FROM header: sip:[email protected]
Cause: This could be due to a client or server which is not handling authentication correctly, or it could be due to an attacker.
Resolution:
None needed unless the failure count is high (>100). Check your network for any rogue clients. Restart the server if problem persists.
Notifications sent by the SMTP channel work fine!
I Have the following Servers:
LCS (live.august.ru) - Win 2003 EE SP2 + Live Communication Server 2005 SP1
SCOM - Win 2012 + SCOM 2012 SP1
Also I have a third server (Win 2003 + SCOM 2007 R2) and it sends notifications to the same VMLCS server successfully. The configurations of IM Channels are identical on both servers:
IM server: live.august.ru
Return address: sip:[email protected]
Protocol option: TCP
Authentication method: Kerberos
IM port: 5060
I tried to change the Authentication method to NTLM, and the port to 5061, but it doesn't help...

Hi,
Please refer to these following articles to configure IM channel correctly:
How to Create and Configure the Notification Action Account
http://technet.microsoft.com/en-us/library/hh212835.aspx
How to Enable an Instant Message Notification Channel
http://technet.microsoft.com/en-us/library/hh212690.aspx
Enabling Instant Messaging Notifications in System Center 2012 Operations Manager
http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/
Alex Zhao
TechNet Community Support

Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
[16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
[16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]:           Always: :Doing Install task for POSTINSTALL
[16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
[16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
   at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Starting*RollBack*******************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Ended*RollBack**********************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version     TimeOfExpiration
       Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012: An account failed to log on. EventID 4625

Similar Messages

Maybe you are looking for