Scom 2012 can't Monitor SQL server2012

i can't get alerts related to  SQL Server 2012 in scom 2012 but i install management pack and applied it.

1)Please check whether SQL server is discovered by SCOM. You can use Monitoring workspace --> Microsoft SQL Server --> Computers to check
2) Make sure that the following action account has required right SQL discovery Account, SQL default action Account and SQL monitoring Account
For detail, please refer to
http://blogs.technet.com/b/kevinholman/archive/2013/10/24/opsmgr-sql-mp-version-6-4-1-0-capabilities-and-configuration.aspx
Roger

Similar Messages

  • SCOM 2012 SP1/R2 Monitoring of IBM Bladecenter doesn´t work

    We tried the IBM Hardware Management Pack 4.0 and 4.5 and configured everything according to the guide. The Bladecenter is discovered correctly but we dont get any health data or Module Information. It´s almost the same as in this thread:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/ceda483b-9500-4831-869c-4b3d0f178924/cant-get-scom-2012-sp1-to-monitor-ibm-bladecenter?forum=operationsmanagerdeployment
    But this problem was resolved through rediscovering the Bladecenter with SNMP v1 or v2 instead of v3 which we did right from the start. We had this Problem with SCOM 2012 SP1 and IBM HMP 4.0/4.5. Since then we upgraded to SCOM 2012 R2 and IBM HMP 4.5 and
    ist still the same issue. Everything else works fine like the Hardware Management Packs for various IBM Storage etc...
    Thank you.

    Hi,
    Do you mean the issue is gone after you rediscover the blade center with SNMP v1 and v2? If so, I will record this.
    Juke Chou
    TechNet Community Support

  • SCOM 2012 unable to monitor servers

    I have build a SCOM 2012 POC, post sql & SCOM installation am not able to monitor any servers.
    I have added servers for agent monitoring. I had tried importing few management packs also. but i dont servers in the any monitoring alerts views. i have waited for 2 or 3 days too but unable to see any servers.
    Please suggest me what are the must have management packs for SCOM 2012 for windows 2008 and 2012 monitoring.
    Do we need to patch or install any hotfix for this to work am not sure..
    Any help would be appreciated.
    Thank you,
    ndraj

    1) check whether those server is under scom monitoring: operations console --> administration worksace --> Device Management --> Agent Managed --> whether you see your server is under this view and its health state is healthy(Green check mark)
    2) monitoring Windows Server 2008 and 2012: you should download
    System Center Managment pack for Windows Server Operatng System, its current version is 6.0.7061.0.
    3) Run as account:  specify credentials for specific computers
    4) Run as profile: When a workflow requires rights and privileges that the default action account cannot provide, the workflow can be written to use a Run As profile. A Run As profile can have multiple Run As accounts associated with it.
    http://technet.microsoft.com/en-us/library/hh212714.aspx
    Roger

  • SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Hi,
    I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
    setup rolls the SCOM install back.
    Has anyone seen this issue before or know how to help resolve it?
    Appreciate your help, below is the SCOM installation log:
    Thanks
    Marc
    [13:27:27]: Always: :Creating Database: OperationsManagerDW
    [13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    : Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
    [14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :Exception running sql string
    DECLARE @sql NVARCHAR(MAX);
    SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
        ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
        LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
    EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion
    of the operation or the server is not responding.
    [14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
    [14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Always: :InnerException.StackTrace:
    [14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or
    the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
    [14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
    [14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    marc nalder

    Hi,
    Based on the log, I recommend you use the following way to test SQL connectivity.
    You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
    if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

    Hi, all
    I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
    but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
    Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
    Thank you.
    Nile

    Hi,
    How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
    Please check the application log on the problematic Exchange server and see whether there are any related event error.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • SCOM 2012 unable to monitor SNMP traps

    After installing SCOM 2012 I did not
    get the SNMP Trap. I tried the solution
    of the topics http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/6826f6a6-bbc3-444b-9b18-288d7fedac3e Nothing
    has helped.
    Help please, why SCOM can
    not take Traps?

    We had the an issue where device was sending SNMP v1 traps as per Wireshark but the device was discovered as a SNMP v2 device. We forced the device to be discovered as a SNMP v1 device and that worked.
    To do so, after you add the device that needs to be discovered within the discovery rule, export the MP called Network Discovery Internal. Open this in notepad and browse to the IP address of your device that needs to be discovered. Change the value for
    "AutoDetect" to v1 in case you want to discover his as a V1 DEVICE. Then you will be able to receive traps from the said device that got discovered.
    <SeedSystem>
                      <SeedIPorName>10.100.x.x</SeedIPorName>
                      <Version>AUTODETECT</Version>
                      <SNMPPort>161</SNMPPort>
                    </SeedSystem>
    Hope this helps.
    Kapil Dham

  • SCOM 2012: MP to monitor Certificate expiration

    Did you know if there is a Management Pack to monitor Certificate expiration.
    I would like to create a Mail Notification alert 1 month before the certificate expire.
    Thanks a lot for your help.
    Regards,
    -Misch-

    Hi,
    Yes, there is
    PKI Certificate Verification Management Pack
    http://thoughtsonopsmgr.blogspot.dk/2009/09/pki-certificate-verification-management.html
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Monitoring services on MSMQ cluster with SCOM 2012

    Hello guys,
    I'm looking a way that SCOM 2012 is able to monitor several services installed on MSMQ cluster. I think it's possible that SCOM 2012 can generate alert through the message queuing service associated to these services but this is an indirect monitoring. I
    would want that SCOM generates the alert for the specific service in problem.
    Any suggestion?
    Thank you very much.

    Hi,
    There is a management pack for ​Message Queuing.
    You can download it from http://www.microsoft.com/en-us/download/details.aspx?id=36775
    Hope it help's
    Greetings,
    Roel Knippen
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Exchange 2010 and 2013 Monitoring with SCOM 2012

    HI all,
    I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
    Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring first

    There are no dependencies on the 2010 MP so you should be good to go, see the following:

  • Does SCOM 2012 monitor "Persona File Handles"?

    Hi,
    I have query whether SCOM 2012 can monitor "Persona File Handles"? Plan is for monitoring threshold limit of 3 lacs file handles on HVDs. If it can be monitored, the alert should be triggered only when it reaches 3 lacs file handles.
    We have SCOM 2012 SP1
    Please answer asap.
    Thanks,
    Naren.
    Thanks & regards, Naren.

    I would suggest you look into the veeam MP for VMWare http://www.veeam.com/management-pack-system-center-resources.html
    I'm not to familiar with "Persona
    File Handles"  but if there's a command you can run to check it then it can be scripted and thus monitored by a custom monitor.
    Cheers,
    Martin
    Blog:
    http://sustaslog.wordpress.com 
    LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

    Hello everybody, 
    Sorry for my english, I write normaly in french, but we have more result in english. 
    I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
    I creat a specific management pack juste for the rule and the views. 
    SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
    SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
    SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
    SNMP Service (Windows service) => Disabled
    SNMP trap (Windows service) => Disabled
    Health Service (Windows service) => Enabled
    Port 162 UDP => Open and listenning by the MonitoringHost.exe
    Firewall rules => Everythinks is OK
    SNMP Trap send version is => 2c
    SNMP Monitoring device version is => 2c
    I try too many of solution on different web site like :
    http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
    http://technet.microsoft.com/en-us/library/hh563870.aspx
    http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
    http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
    Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
    Thank you in advance. 
    KimBaxZ
    Computer expert system technology

    Hello Yan Li,
    I read your link, and I found this : 
    The network devices must be discovered and registered as ICMPSNMP devices.
    And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
    I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
    I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
    Have a nice day
    Best regards
    KimBAxZ
    Computer expert system technology

  • SCOM 2012 SP1 is failing to install - SQL not compatible

    I'm getting an error when installing SCOM 2012 SP1 stating the SQL is not supported. I have seen a few posts on the forum about this error message but so far none of the resolutions resolved my issue.
    Using named instance on port 2433.  Entering SQL\instance and port 2433 yields same message as seen in another post:
    "The installed version of SQL server is not supported.  Verify that the computer and installed version of SQL Server meet the minimum requirements for installation.  Please see the Supported Configurations document for further information."
    I noticed I get this in my OpsMgrSetupWizard.log
    [15:03:28]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [15:03:28]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    Notice the last line - IsSQLOnAValidComputer is null/empty.  The solutions I found are to open the ports between these servers but the SQL server and SCOM server are on the same network - no firewall between them.  The registry key for domain firewall
    policy to 'EnableFirewall' is 0.  The firewall service is disabled on both machines.
    I am running the installation as a domain service account - for the DAA.  It has local admin on the SQL and SCOM server.  It has sysadmin DB access to the instance.
    SCOM Server:
    Server 2008 R2 Standard SP1
    SQL Server:
    Server 2008 R2 Enterprise SP1 | SQL 2012 RM 64-bit version 11.0.2100.60
    Any help is greatly appreciated.

    Glad to hear the issue has been resolved. Thanks for the update.
    Niki Han
    TechNet Community Support

  • How to use SCOM 2012 R2 Monitoring the standalone Windows Server

    Greetings,
    I want to use SCOM 2012 R2 to monitoring the standalone Windows Server that does not joined the domain. would you please guide me how to configure it.
    Thanks
    Frank@Hiweb 冯立超@瀚博资讯

    I found the answer, as following:
    http://pkjayan.wordpress.com/2010/05/17/agent-managed-non-trusted-servers-without-gateway/
    and
    http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
    Frank@Hiweb 冯立超@瀚博资讯

  • Resource Pool "Observer" - how failover works in SCOM 2012

    We currently have 5 Management Servers SCOM 2012 SP1 Cu6 + a SQL Failover Cluster for SQL database of SCOM/SCOMDW.
    2 of these Management Servers are dedicated for network monitoring of approximately 200-400 network devices (including certified and generic devices). Additionally, we have about 20 distributed apps + 30-40 websphere JVM instances defined which are spread
    accross all management servers.
    my questions
    1.) how can I determine, where a distributed app or network device or websphere instance is currently attached to? They belong to any member in the resource pool, but I haven't found any possbility to query scom (e.g. PowerShell) where a specific entity is
    currently attached.
    2.) for network monitoring, a seperate resource pool is defined (no scom agent is connected to these 2 servers). These two servers have local SSD disks, 2x quad core CPUs and 24GB memory each. When one of these management servers is rebooted, the mistery
    starts. Many distributed apps throw a critical error (unavailable), in the eventlog many network devices throw also an error that they are offline, in SCOM they turn gray. The remaining management server is nearly exploding (high IOPS without much throughput)
    for approx. 30 minutes, it seems that after return of the second management server they try to balance somehow the instances, but with many errors. (antivirus is turned off)
    => now, after several days, we've found somewhere in the internet the info that with 2 management servers in a resource pool, an observer should be defined. Should this resolve our issue or will e.g. the distributed apps always through an alert until their
    state is recalculated? The documentation to the observer function is rare, and we are not able to find any further hint how to resolve our issue when doing reboots of management servers.
    Thanks so far!
    Best Regards Klaus

    Dear Alexis,
    Thanks for your answer. We've now changed the "All Management Server" Resource Pool to "Manual Membership" (through PowerShell), and clearly defined Observers for each resource Pool. Now, if any management server fails, the objects (distributed App, WebSphere
    Instance, ...) turn into "not monitored" instead of "offline" which makes the difference now.
    However, the network monitoring servers need about 30 to 60 minutes after reboot of one of them until they've reprocessed and recalculated everything. Within this time, the disk has 100% active time with approx. 1500 disk transfers/sec and about 1MB/s throughput.
    (we've about 300 network devices - 150 are certified ones - attached to the management servers)
    Best Regards Klaus

  • SCOM 2012 repair and rebuild

    Hello Gurus
    I have a quick question. I have a SCOM server that is giving me weird errors, I have already posted the question at http://social.technet.microsoft.com/Forums/systemcenter/en-US/b034c553-c1b9-4152-bb77-d9a29906d25c/scom-2012-r2-network-monitoring-error?forum=operationsmanagergeneral#b034c553-c1b9-4152-bb77-d9a29906d25c
    but no answers :(
    I would have loved to troubleshoot the error but since time is running out, I am thinking maybe to re-install the server. Every other component of SCOM is working, so I was wondering, is it possible for me to keep the other settings and configuration of
    SCOM in the new SCOM installation. I want to retain the following specifically:
    Management pack and their customization
    The workgroup server management certificate 
    Server inventory
    Overrides
    Reporting and analysis service
    Web console configuration
    Account and run as profile configuration.
    Alternatively, I am okay if I can only get rid of the network device inventory from the database. I believe the issues that I am facing are because of rogue records of network devices in the database. I am okay with removing them and starting the discovery
    of the network devices again.
    Any help will be greatly appreciated.
    Regards,

    Verify that SNMP open in core switch to Management Server {#snmp-server community "Password" username}and verify from string community (case sensitive)
    If not worked, Delete Network Device and reconfigure it again
    To Delete Network Device, follow the below steps
    In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
    remove them.
    Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
    you can also check below link to remove/restore network device
    http://technet.microsoft.com/en-us/library/hh212795.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Maybe you are looking for

  • AVCHD Camcorder to DVD Advice Needed - Am I Doing This Right?

    Hi All, I have a MacBook Pro 2.4 GHz Intel Core Duo with 2GB memory. I also have a Canon HG10 AVCHD Camcorder. I took a total of 2.5 hours of video footage. 1. I attached the camcorder to my computer via USB and downloaded the movie off of my camcord

  • Cannot Activate the Integration Process

    Hi Friend, File Merging: ========== I wonder why the receiver step not taking the " Use Correlation" or "Activate Correlation" value even after creating the correlation list and check(F7) the same. At receivers step in Graphical Definition(BPM) I can

  • Sony, it's not fair! Sony is selling unlocked Z3 starting from today!

    While we are locked and afraid of unlocking our bootloaders for decreasing camera quality ( meaning no root ), Sony has started selling unlocked Z3 from today!! How about us with locked bootloaders? It's not fair! Solved! Go to Solution.

  • "Go to" commands (in Waveform view)?

    Does Audition (CC v6) have any "go to" commands, e.g., to move to a specific time or a specific marker number? I've checked the Adobe Audition CC Help document and searched the forum but can find no reference to such a navigation command. Thanks!   

  • Reproducible issue: Attempt to validate an already invalid RegionSite error

    Hi Experts, I seem to have a reproducible issue, is this a ADF bug? we using jdev 11.1.2.1 We use dynamic region, in the task flow of the region, we have a table inside a page, first column is the delete button which is: <af:commandImageLink icon="#{