SCOM 2012 closed report
Hi;
Here my requirement is I need to pull the number of closed alerts for last 5 days for a particular dashboard view. Once I select the Closed Alerts view, I can see only the alerts for last 3 days.
We are using SCOM2012 sp1
Could someone pls assist me on this.
Thanks..
Regards, Rajeev Parambil
Agree with Chunky
Also Use below setting and select which alert and severity and Time that you want
For how to create dashboard, you can refer below link
http://thoughtsonopsmgr.blogspot.com/2010/09/scom-and-dashboards-part-ii-scom.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali
Similar Messages
-
SQL version could not be verified error while installing the SCOM 2012 R2 reporting component
I have the below SCOM server roles in my SCOM 2012 R2 set up
1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
2) All the DB servers with SQL 2012 SP1
3) Windows firewall is turned off on all the servers.
4) Success fully installed all the components except SCOM reporting.
While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
Also tried re installing the SQL on Reporting server.
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information".Hi,
As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
If possible, you may re-install SSRS and then install SCOM reporting service.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?
Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session EndedHi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801 -
SCOM 2012 SP1 Reporting Services empty
Hello,
When i open Reporting from management console, reporting work space empty, but when i turn off windows firewall (Windows 2008R2 SP1) on my SQL server 2008 R2 SP2 i can see all MP/Data in Reporting action panel.
I've opened these ports :
1433/TCP, 1434/UDP, 5723/TCP, 137/UDP, 138/UDP, 139/TCP, 445/TCP,135/TCP,
But it did not help.
What is the configuration of the firewall for Reporting Service?Hello !
Could you check this post please :
http://social.technet.microsoft.com/Forums/en-US/c219058f-d10d-48ca-8a61-ca9f1340bfdb/scom-2012-empty-reporting-workspace?forum=operationsmanagergeneral
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions. -
SCOM 2012 R2 Reporting Services High Availability Configuration Setting
Can u guys tell me how I can make a scom 2012 r2 report server high availability configuration kindly share the steps or screen of it.
SCOM reporting feature is depend on SQL reporting and as a result you may refer to SQL reporting service high availability.
For detail, pls. refer
http://technet.microsoft.com/en-us/library/bb522745.aspx
http://www.mssqltips.com/sqlservertip/2335/scale-out-sql-server-2008-r2-reporting-services-farm-using-nlb-part-1/
http://www.mssqltips.com/sqlservertip/2336/scale-out-ssrs-r2-farm-using-windows-network-load-balancing-part-2/
http://technet.microsoft.com/en-us/library/hh882437.aspx
Roger -
SCOM 2012 Closed and Open Alert Reports
Dear all,
In SCOM 2012 R2 how to Generate a report that contain open and closed alerts for past 24 hours. Is there any inbuild report ?
Thanks,
Sengottuvel MYes, you can this with Report "Alerts" (http://technet.microsoft.com/en-us/library/hh212929.aspx)
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
SCOM 2012 R2 Reporting services installation error - data reader account
I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.Adding more info:
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to use the SCOM 2012 Web Reporting page
Hello all-
We are on SCOM 2012 SP1. I just have a general question about reporting. I know there is a "Reporting" tab in the real, locally installed, SCOM Operations Console software. That part I get. I see that there
are many pre-made reports the for me to run. For example under Microsoft Server 2008 Operating System (Monitoring) folder there is a
Performance History report. When I double click on it, it takes me to the report window where I can click
Add Object and add a server and then click
Run.
This is pretty simple in concept. BUT very few people at my company have the full Operations Console installed on their machine. And as I'm sure you know, the SCOM Web Console does not have a Reporting Tab. So they have to use the
SCOM Reporting website to run such reports. I found that you can get to this page at the url:
http://<reporting server>/Reports
This does bring up the Reporting console. On the list I do see a Report.Windows.Server.2008.PerformanceHistory listed. So this surely seems to be the equivalent from my screenshot above. However, it's not even close to user friendly like
the Reporting area in the SCOM operations console software. There's multiple fields at the top. All of which are required, and almost none of which have dropbox or other ways to help you fill them in. I have no idea what to put into these boxes or the format
to use.
What am I missing here? Is there a more user friendly interface anywhere? In an ideal world, I'd really love to have a user interface where I can post the links to a few popular reports, like CPU and Disk Space for example. Then ideally
all the user would have to do is select their servers and the time frame and that's all. Which really is what you do in the Operations Console software. So isn't is it that easy in the web reporting tool? Is there a guide or how-to
section somewhere I'm missing? Or just a more friendly looking way to get at this information?Well, my first screen shot above is squished, so you really can't see it. But what I'm saying is that the same report in the SCOM software has the level of configuration I want on it. It allows you to pick the date range and add objects
to it, then you can click on Run. However when I access the same report on the reporting console, it has all these extra fields. None of which I know how to fill in properly.
I would ultimately like my customers to be able to do exactly that in the web version. Pick their server and their date range and run it. There are not likely going to be too many reports like you're mentioning which I can completely configure
before hand, so they just click on the link to have it run. Most times I'd like my users to at least be able to select a server name.
Any idea how I would simplify the web version of the report? Or why they look so very different? -
SCOM 2012 R2 Reporting is down
Hi All,
Reporting is down in SCOM 2012 R2.
Environment and issue: I have a small management group which consists of two MS and a SQL DB which is clustered. The reporting binaries have been run on node1 of the DB server only and the node 1 only has the follwing registry key :
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\System Center Operations Manager\3.0\Reporting,\ DWDBInstance
Now , all the sql resources are on Node 2 and when i run the report it says :
Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get
Online Help
And when i dug into the log it says:
library!ReportServer_0-1!1940!01/18/2015-21:07:03:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Incorrect security descriptor version, Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.;
Earlier the following link format use to work but it does not now:
http://clustername/ReportServer_instancename
I tried to change it to node 2 like below [which does not work]:
http://node2/ReportServer_instancename
Finally i just tried with node 1 which works just fine via web browser:
http://node1/ReportServer_instancename
I think switching the sql resources back to node1 will solve the situation, i have already created a ticket to the DB team to look into it.I know that SCOm reporting is not cluster aware and that is how i just ran the reporting server binaries on the first
node.
Could you help me with the change of reporting server entries in either registry or config files or DB tables which could tell SCOM to look and contact only the node1 for reporting and not the node2.
Any comments would be greatly appreciated as I need to fix this soon else I would not be able to send the monthly SLA reports to my stakeholders as the Service Level Report Library option is not visible via SCOM web portal reporting.
Regards,
Techie Seeker.Hi,
As SQL cluster is not supported for operaion manager reporting(more information, please check
Operations Manager Reporting – Supported SSRS Configurations ), it is suggest you to move your data warehouse to another SQL:
How to Move the Data Warehouse Database
https://technet.microsoft.com/en-us/library/hh268492.aspx?f=255&MSPPError=-2147217396
Moving the Data Warehouse Database and Reporting server to new hardware–my experiencehttp://blogs.technet.com/b/kevinholman/archive/2010/08/25/moving-the-data-warehouse-database-and-reporting-server-to-new-hardware-my-experience.aspx
In addition, although cluster is not supported, someone else really have this done, you may refer to
Moving Operations Manager Data Warehouse Database part in the below article,and you may find registry keys and databases that needed to verified.
SCOM DataBases Migration to SQL Cluster
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCOM 2012 SP1 Report Timed out
Hi All,
My large reports are timing out after 30 minutes in SCOM 2012 SP1, with the error: The Operation has timed out
I'm trying to run the Performance Detail report from Microsoft Generic Report Library against Windows Server 2008 Operating System group (1400 servers) for last 1 year for Percent memory used. I can run the same report for Windows Server 2012 Operating System
group (200 servers) sucecssfully.
I've already verified and configured the reporting services for reports to not time out.
http://www.systemcentercentral.com/forums-archive/topic/scom-reports-large-reports-time-out/
http://anoopcnair.com/2011/07/20/configmgr-sccm-sql-server-reporting-service-timeout-expired/
Any suggestions?
Thanks,
Harry
Thanks, Harry :-)Hi There,
Based on my knowledge, When ever a SQL query is ran against any database the query output is executed and stored in TempDB and then it is shown to your SSMS or reporting application.
So i would suggest you check the size of the temp SQLDB and see if auto growth is enabled for that and does your drive as well have enough space to hold that temp DB in its local drive if the DB grows its self.
As querying 1 years data for 1400 servers is a huge data and requires lot of time and space.
I had a similar issue here, Look here:
https://social.technet.microsoft.com/Forums/en-US/6420f4e1-fc21-49c9-8fed-eddbe6cecabf/my-sql-server-seems-to-be-creating-huge-tempdbmdf-file-post-database-migration?forum=sqlservermigration
Gautam.75801 -
Scom 2012 r2 - report viewer controls are not installed
Hi
I'm stop on this error when installing the operation console and web console
report viewer controls are not installed
OS : Windows 2008 R2
SCOM Version : SCOM 2012 R2
I installed the install Report Viewer Redistribution 2008 SP1 and install
Report Viewer Redistribution 2010 ans I'm still getting that error
Please advise ...
RobertHi
The requirements are listed here http://technet.microsoft.com/en-us/library/dn249696.aspx#BKMK_RBF_OperationsConsole
Install Microsoft
Report Viewer 2012 Redistributable Package then it should work.
Cheers,
Stefan
Blog: http://blog.scomfaq.ch -
SCOM 2012: A report to show a server's uptime?
I need to write a report showing the availability of a number of servers which form a "system" and wanted to ask, which properties of each computer do I use for this in the report?
If I add all available properties, I get the following:
Windows Computer: Uptime=0, Downtime=100
Health Service: Uptime=100, Downtime=0
Health Service Watcher: Uptime=100, Downtime=0
Microsoft.Systemcenter.ManagementService: Uptime=100, Downtime=0
I know that this server has been up 100% during the test period so I'm confused as to why "Windows Computer" is showing Uptime as "0"?Hi,
Did you run the Availability report under Microsoft generic report library for those servers?
What conditions did you choose as downtime:
Here is my result when only choose unpalnned Maintenance as downtime:
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCOM 2012 Reporting - Feature List
Is there a simple documentation listing out what SCOM 2012 R2 Reporting is capable of.
People at my company wants to know what this "Reporting" does.
Instead of giving them a 1,000 page documentation on SCOM, if there was a simple document listing out its feature set, that would be great.Hi,
From my point of view, SCOM reporting is to use to get needed reports about service availability, performance and alerts and so on. With those report, we may do data analysis to get more details about the monitored environments.
With management pack imported, there may be many available reports that can be run to get proper information about what monitored by using this management pack.
If there is any misunderstanding, please feel free to let me know.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCOM 2012 R2 Upgrade - Reporting goes to install mode instead of Upgrade
Hi
I have upgraded all scom managent servers succesfully, but when I try to run setup.exe on the SQL server it doesn't detect the existing SCOM 2012 SP1 Reporting installation and instead of Upgrade mode it goes into Install mode. Have anyone seen this
before?
TorboroHi Torboro,
Just a quick reviewal of the below settings.
Can you once check and see if SCOM 2012 / 2012 R2 wizard / program is showing in Add / remove programs
of the reporting server.
If yes can you select uninstall / repair option and give next it will show the installed components
and see if you get the reporting option there as per my screen shot below plz?
Gautam.75801
Maybe you are looking for
-
How to post URL link in sap script
How to give link in sap script.. For example if someone select [sap|www.sdn.sap.com]. it will direct to www.sdn.sap.com Regards Sas PS: Insert Test --> Hypertext option tried but not working properly... Hey no replies....any one any idea?
-
Launch a browser from a application.
I know about AppletContext.showDocument, but is there any method for applications to launch a web browser in a similar platform independant manner? If so is there also the ability to specify the browser has no address bar/toolbars etc? The JNLP packa
-
JTable horizontal fit into JScrollPane
Hi, I am having problems with a JTable that has too many columns so it is not possible to see them all at once. So I am trying to put the table in a JScrollPane that can display the right ends of the table when scrolled, with the correct column width
-
Hi, I am new to this board and although I have been using Macs since 1986 and can replace parts etc, the OS and Internet connections are a mystery to me. At the moment my emails are routed from my G5 via a broadband router serving many computers wher
-
Does ARD 2.2 run on Intel iMacs?
I'm trying to install ARD 2.2 on a 17" Intel iMac and I'm getting an error after the install when I try to open the application. (The installation process runs fine and it tells me that the software was installed properly). http://www.xid-renrag.com/