SCOM 2012 Console Displays Wrong Users Views
For some reason when I bring up the SCOM 2012 Operations Manager console on my PC I only see the views of another user I set up. If I remote console to the SCOM server I see all the views I am supposed to. I tried rebooted my PC and deleting the SCOM console
cache but I am still seeing the wrong views.
Thanks
for info
Regards
Enis,
Similar Messages
-
View Process Peak on SCOM 2012 Console
Hi guys,
I need your help for the following question.
Is there any way to view in SCOM 2012 Console the process that generates a memory o disk peak on a monitored machine? Until now, only I can see an alert for the resource peak, but I can't identify the process that generates it.
Regards,
RodrigoSCOM does not monitor the memory usage per process base. If you want to do it, you should create a custom rule.
Roger -
SCOM 2012 Console not responding when the server to be connected is down.
SCOM 2012 Console hangs when the server to be connected is down or gone (e.g. lease replaced). How to change the 'connection server' to point to a valid server without re-installing SCOM Console? Thx
To enable high availability for your Operations Manager Data Access service, you can use Network Load Balancing (NLB)
PLz refer: http://blog.coretech.dk/kra/how-to-make-operations-manager-2012-rc-scom-2012-fault-tolerance/
Faizan -
Creating SCOM 2012 Logical Disk Space Availability View
Hi Everyone,
I am looking to create a SCOM 2012 Logical Disk Space Availability View and having a little trouble finding documentation on how to do this. It would be really handy to see all of the servers being monitored and how much free space they have all in one view.
Has anyone created a view like this before.
Thanks in advance for all your help.
JDHi,
Below are some blogs that will help you to understand more about disk space monitoring
Writing monitors to target Logical or Physical Disks
http://blogs.technet.com/b/kevinholman/archive/2009/11/24/writing-monitors-to-target-logical-or-physical-disks.aspx
OpsMgr: Logical Disk free space alerts don’t show percent and MB free values in the alert description
http://blogs.technet.com/b/kevinholman/archive/2011/11/17/opsmgr-logical-disk-free-space-alerts-don-t-show-percent-and-mb-free-values-in-the-alert-description.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCOM 2012 SP1 Test environment - "New View" is greyed out?
I'm new to SCOM....
I just created a SCOM 2012 SP1 test environment, but for some reason the "New View" button is greyed out. (I attached a screenshot)
I can't figure out why and it pretty frustrating. I'm assuming it is a permissions issue, but I can't figure out how to get this feature enabled.
any assitance is greatly appreciated.Hi,
The "New View" is greyed out if you try to create a new View in a sealed Management Pack.
You can create a new View only in unsealed Management Pack's inside the console.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch -
"Current User" Displays Wrong User
hi,
has anyone else seen the problem of the "Current User" column displaying the wrong user name?
any work-around?
(ARD 3.2, OSX 10.4.11)
thanks.
-mikesorry but i don´t understand your question
What is the exactly problem you have?
there are various solucion for your problem
for example that the machine has a diferent user login
or the "current User" settings is not active!
expand your question please! -
SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)
Hello everybody,
Sorry for my english, I write normaly in french, but we have more result in english.
I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
I creat a specific management pack juste for the rule and the views.
SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
SNMP Service (Windows service) => Disabled
SNMP trap (Windows service) => Disabled
Health Service (Windows service) => Enabled
Port 162 UDP => Open and listenning by the MonitoringHost.exe
Firewall rules => Everythinks is OK
SNMP Trap send version is => 2c
SNMP Monitoring device version is => 2c
I try too many of solution on different web site like :
http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
http://technet.microsoft.com/en-us/library/hh563870.aspx
http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
Thank you in advance.
KimBaxZ
Computer expert system technologyHello Yan Li,
I read your link, and I found this :
The network devices must be discovered and registered as ICMPSNMP devices.
And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
Have a nice day
Best regards
KimBAxZ
Computer expert system technology -
Some report fields not displaying when users view reports in a Citrix
Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don -
Admin Console displays wrong Hardware Scan and Heartbeat DDR times
When we open up our collections to "Show Members" and add the Hardware Scan and Heartbeat DDR display columns, we notice those times do not reflect the actual times of the last Hardware Scan listed in the Resource Explorer or
the Heartbeat Discovery time shown in the properties of the DDR. Is there an evaluation rule that I am forgetting about?I believe that information is summarized every hour rather than displaying live info. You may have to close the node or refresh the resource to get it to update after being summarized.
I'm not finding any specific information in the documentation or anywhere in the console that this is controlled. Maybe someone else has more concrete info.
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
<-- If this post was helpful, please click "Vote as Helpful". -
Admin Console not displaying new Users and Groups from LDAP
We created a new Realm in WebLogic, which specifies the location of the Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to find the ldap
server to use for authentication. My problem is this- the Admin Console is not
displaying the new users and groups from the LDAP server. Shouldn't the WebLogic
Admin Console display any users and groups specified in the ldap server, which
is referenced in the customized Realm?Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm? -
NOT RESOLVED - SCOM 2012 R2 - App Advisor and App Diagnostics Issue
Hi there!
Here is our scenario: SCOM 2012 R2 is deployed in the environment
SCOM - Management Server and SCOM Management Console.
SQLOD - SQL 2012 Operational Database
SQLDW - SQL 2012 Data Warehouse Database, SQL Reporting Services, SCOM Reporting, SCOM Web Console.
Problem: SCOM Administrator is able to open SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console from any computer only after the SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console are opened
from SQLDW (i.e. after opening them from the place where they were originally installed). The errors message prompts to retry after adding the user to the proper groups for SCOM Application Advisor and SCOM Application Diagnostics. SCOM Web Console prompts
the user to login.
Workaround: Open SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console on SQLDW (i.e. after opening them from the place where they were originally installed) and everything works fine.
Question: What is causing the issue and how to fix it?
Many thanks, in advance!I followed the article and it did not fix the issue.
Here are additional details:
There is only one user who does not experience the issue and it is a user under whose credentials the SCOM was installed AND that user has to login from the local network. If this users tries to connect over VPN he receives the same error.
Here are errors when Test1 user logs in:
Application Advisor (Enabled authentication: Windows Authentication, Forms Authentication, ASP.NET Impersonation):
Authentication error
User account: DOMAINNAME\Test1
This user account does not have sufficient rights to use Application Advisor.
Ask your administrator to add this user account to the Operations Manager Report Operators role, and then try again.
Application Diagnostics (Enabled authentication: Windows Authentication, Forms Authentication):
Access denied
User account: DOMAINNAME\Test1
This user account does not have sufficient rights to use Application Diagnostics.
Ask your administrator to add this user account to the Operations Manager Application Monitoring Operators role, and then try again.
Operations Manager Web Console (Enabled authentication: Windows Authentication):
Prompted for credentials with error:
The user credentials are invalid or user does not have permissions to access the application.
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.Security.ConnectionSessionAccessDeniedException: The user access is denied.
This error reappears no matter whose credentials are entered. Even the SCOM Installer's credentials generate Error 3 when entered at the time when Test1 user is logged on.
App Pools:
OperationsManager - 4.0; Integrated; ApplicationPoolIdentity; 1 application
OperationsManagerAppMonitoring - 4.0; Classic; NetworkService; 2 applications
OperationsManagerMonitoring View - 2.0; Classic; NetworkService; 1 application
Added *://*.domain.local zone to the trusted zone in the Internet Explorer.
Please help!!!! -
SCOM 2012 Issue The Data Access service is either not running or not yet initialized
Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch. -
Only showing APP monitoring Reports in SCOM 2012 Reporting
Hi all,
Recently i upgrade the SCOM 2012 from 2007 R2 Managament Server only because in previous environment we have only one MS server and SQL server 2008 SP2.
Now i have 4 servers for SCOM 2012.
1) SCOM Managament server (which was upgraded)
2) SQL server 2008 SP2 (running 3 instances)
3) SCOM ACS server (New installation)
4) SCOM Reporting server (New installation)
I have using two accounts
1) SCOM.action 2) SCOM.sdk
When i install reporting, reporting Tab are showing in the SCOM
2012 console but only Application monitoring reports are showing in Reporting. I was deleted some MP’s and then import it but the report are not imported in reporting tab. I also check SSRS, it works fine. Both SSRS url’s works fine.
I don’t know whats the problem.. Please clarify me what’s the problem.????
Regards,
KamranHi Muhammad,
I am also facing the exact issue as expalined above.
Even the application monitroing reports are not working. When i try to launch application monitoring reports from reportmanger , I get dataset error and see that apm.* views are missing.
Also tried deleting and importing the managementpacks, without any success. This issue is happening only in production environment.
It will be very helpful if you can let us know what Account permisisons need to be checked for. Thanks in advance.
Thanks -
Copy\Paste Views not working in SCOM 2012 R2 console
Dear Concern,
Hi, I am using SCOM 2012 R2 and i have come across a problem that when i copy a view and try to paste it in same management pack, the paste action is not working. Cut and paste is working fine but copy paste not working. When i copy any view, the paste option
come alive but did not work when i clicked on it.
Has anyone tried and tested it?
Regards,
Jazeel Ahmed SiddiquiHi,
I have tested it in my SCOM 2012 SP1 Environment and it worked there from Sealed to Unsealed and Unsealed to Unsealed.
I have no R2 Environment in reach at Moment so i cannot test it there.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch -
SCOM 2012 Open Custom Dashboard directly in Console
I wanted to display a dashboard on a big Screen .
I was looking for options and with the help i could find , we could open it using Web console on the TV , or Sharepoint Site or Visio diagram
then i found we could open the particular view directly using SCOM console (If it is installed)
Using something like: Microsoft.MOM.UI.Console.exe /ViewName:View_f0e6e6d99131451985140cb5f020028e.
This is valid for SCOM 2007 R2
Is there an similar option for SCOM 2012, I want to to show a particular dashboard that we created using this method.
I am following this article
http://www.peppercrew.nl/index.php/2011/04/scom-open-view-direct-in-console/I tried this $mg.GetMonitoringViews() | where {$_.displayname -like "*My Distributed
App*" | select Name
However i am not able to fetch the Distributed Application view that i created.
Is distributed application different from View. I somehow aint able to find it when using the Powershell or SQL
I even tried to fetch from SQl Database as well using http://www.peppercrew.nl/index.php/2011/04/scom-open-view-direct-in-console/
Maybe you are looking for
-
How can I Write a sine wave in an Access-fil​e?
I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time? In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writ
-
Inspection lot creation based on "right" inspection plan version
I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date. When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on
-
Create opportunity using workflow rule
Hi, Is there a way to create an opportunity record using a workflow rule. We want to be able to create a service opportunity to be triggered automatically by the sales person by either updating a flag or check box which inturn triggers a workflow rul
-
Acrobat Pro X will not save any of the changes/rename I make to the bookmark titles. I have to choose save-as and rename the PDF file for it to save the changes. I was able to get it fixed in Acrobat 9 on another user's computer by uninstalling and
-
Hi, I have completed Oracle PL/SQL Developer Certified Associate program and would like to get the logo for the same to add to my Resume. Unfortunately the certificate has arrived at my parents place and I cannot read the instructions on the same. I