SCOM 2012 - Custom disk space report - Computer Groups

Hello,
I've created custom disk report with sql query to pull the disk space for all servers. The report has parameters start data,End date and computer name but now my requirement would be to get the disk reports based on custom created computer group, Is it possible
to feed computer group name instead of computer name in the custom reports?
Regards,
Vijay

Hi,
For SCOM 2007, you can’t select a group of servers and run a free disk space report on them. And for 2012 I think it also like that.
But based on my research, someone said that when you create group with Logical Disk targets, it may work. Here are two similar threads for your reference:
Report on Logical Disk Free Space % for a group of servers
http://social.technet.microsoft.com/Forums/en-US/fbec6fce-8f65-461b-8730-98a0d493c375/report-on-logical-disk-free-space-for-a-group-of-servers?forum=operationsmanagerreporting
Can't target free disk space report at Custom Group
http://social.technet.microsoft.com/Forums/en-US/8555fc3e-eed2-4523-a307-589eb6ff72fc/cant-target-free-disk-space-report-at-custom-group?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Creating SCOM 2012 Logical Disk Space Availability View

Hi Everyone,
I am looking to create a SCOM 2012 Logical Disk Space Availability View and having a little trouble finding documentation on how to do this. It would be really handy to see all of the servers being monitored and how much free space they have all in one view.
Has anyone created a view like this before.
Thanks in advance for all your help.
JD

Hi,
Below are some blogs that will help you to understand more about disk space monitoring
Writing monitors to target Logical or Physical Disks
http://blogs.technet.com/b/kevinholman/archive/2009/11/24/writing-monitors-to-target-logical-or-physical-disks.aspx
OpsMgr: Logical Disk free space alerts don’t show percent and MB free values in the alert description
http://blogs.technet.com/b/kevinholman/archive/2011/11/17/opsmgr-logical-disk-free-space-alerts-don-t-show-percent-and-mb-free-values-in-the-alert-description.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM only monitoring disk space of a group of servers

I have been looking for a way to setup SCOM to ONLY monitor the disk space on a specific group of servers.
We have a sandbox environment that consists of approximately 100 servers. The only responsibility we have is to make sure these machines are patched. Everything else related to the OS and Software is handled by the developers who own the sandbox,
so no other monitors are needed. Microsoft patches are failing because some of the C drives do not have enough disk space. Is there a way to discover these servers and only have the disk monitored? All other monitors in SCOM can be ignored on these
servers.
Thanks for any assistance that can be provided.

Without knowing what else you have in your SCOM environment, it could be a lot of work to start excluding this group of servers from all the other monitoring you have.
Other options you could consider are to allow the servers to be monitored, but somehow exclude those alerts from being sent in any subscriptions, or putting the components of those servers into Maintenance Mode other than the C: drives, but both of these
options will still collect information on these 100 servers and take space in your SCOM DBs.
You can refer to this page for how to use the free space monitor and override it for a group that will target your 100 servers. http://blogs.technet.com/b/jonathanalmquist/archive/2009/04/04/logical-disk-free-space-monitor.aspx

Simple Disk Space report

Hi All,
Can you guys have any simple disk space report to get total Disk and free Space for a group of servers

For disk free space report for a group computers
1) Create a computer groups
2) Reporting--> Microsoft Generic Report Library --> Performance Detail
3) Create data series with object is computer group which you defined in 1) and rules as logical disk free megabytes 2008 and logical disk free megabytes windows server 2012
4) Run the report
5) View detail of each machine, you should click performance detail for each object
For total disk,
1) Create a custom group which contains all logical disk drive of conscious servers
2) Reporting--> Microsoft Generic Report Library --> Custom Configuration
3) In the object, select the group defined in 1)
4) In reprt fields, select "Size MegaBytes"
Roger

SCOM 2012 R2 System Performance Report issue

Dear All,
We have SCOM 2012 R2 with SQL Server 2012.
For last few days we are stucked with SCOM System Performance Report. We are trying to achieve following:
Generate a report of last 15 days of all the following components in a single report.
Get Memory Utilization of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing total Memory of the server.
Get Processor Utilization report of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing process installed on the server.
Get Disk Time report with (I/O) MB / Sec in Line Chart form.
I have tried creating a sample with photo editor to provide you better understanding of my requirement.
We can go for customizing reports with Report builder or any other tool which can help us achieve this task. Need your suggestion for the above.
Thanks
VN

1) open the url http://reportserver/reports where reportserver is your report server
2) navigate the folder Microsoft.systemCenter.Datawarehouse.Report.library
3) click the arrow of report Microsoft.SystemCenter.Datawarehouse.Report.Performance and select download
4) repeat setp 3) for Microsoft.SystemCenter.Datawarehouse.Report.Performance.rpdl
5) rename its file name and upload its into the folder Microsoft.systemCenter.Datawarehouse.Report.library
6) click the arrow of report which you upload on step 5) and select manage
7) update its DataWarehousMain --> A shared data source as /Data Warehouse Main
8) update Custom data source as Credentials are not required and click Apply
9) click the arrow of report which you upload on step 5) and select Edit in Report Builder
10) right click the unwanted part and delete
Roger

A200 Disk Space Report Problem

I have a problem with my A200. The disk size is 40GB and currently it has 15GB in use.
Occasionally the machine will suddenly start to report that the disk has only 40MB free space remaining - confirmed by checking properties for the disk under my computuer. After a reboot all goes back to normal with the correct free space reported.
Is this a known issue for this machine? I've seen there is a BIOS update available but can't see any details of the issues that it is meant to address.

Hi,
in my opinion you should make a BIOS update.
Did you scan your HDD with a current antivirus software?
You can also run Scandisk and Defrag which are checking your HDD.
Chris

SCOM alerts on disk space C drive only

Hi,
My goal is to write a runbook to monitor the SCOM alert on low disk space and then trigger a command to remove a pre-defined list of folders/files on C drive when the free space is below 10%
On Monitor Alert activity, I have already applied 2 filters
1. Name Contains Percentage Logic Disk Free Space is low
2. Severity Equals Warning (as it has been configured as 10% free space)
How do I define the filters to trigger this runbook when these new alerts that only happens on C drive
Thanks,
Jimmy

I have tried a filter with MonitoringObjectDisplayName = C: and MonitoringObjectDisplayName contains C:, that did not trigger the next activity although I can see that it passed the value of C: to both parameters.
I am going to try the filter with "Description contains C:" as I did not see the option - "Start with"

SCCM 2012 - Custom Hardware Inventory Report

Hi All
I am looking for a step-by-step on how to build a custom hardware inventory report in SCCM 2012 that is similar to the default Hardware-09A report but with a few added fields.
The fields I am looking to add are
Current logged on user
Monitor make
Monitor Model
Monitor Serial
Also, if I right click and select Edit, the report view does not open to view the SQL statements.
Any assistance is appreciated
Thanks

and is there a solution for the other points I made?
Monitor make
Monitor Model
Monitor Serial

Cluster Disk Space Report - DESPERATE

Please can someone help the worldwide SCOM community and give us a Cluster Disk Report?
Name your price - I will pay for this.

Here's how to do it. We have a 2-node cluster, NODE1 and NODE2. The Cluster Name is WATER. We want a report for a file system that's on the cluster called Backups (the M: drive, but the drive letter doesn't matter, as SCOM uses the name of the file system).
Start with a Performance Detail report. Change your date range to whatever you want. Create a new series. Click on "Add Group" in the "Series Details" section (make sure you pick "Add Group", this is important). Find your cluster name, WATER and choose the
Windows Computer object.(it's odd, but trust me on this!)
In the Rule section, in the Search by Name tab, find the "Windows Server Cluster Disks Monitoring" MP. Pick the rule you want to run the report for, click OK. Back in the Rules section, select "Specific Instances" and find the name of your disk you want
the report for (in our case, "backups").
Here's what the settings/parameters look like when you're done:
Click OK and run the report. That's it!
"Fear disturbs your concentration"

Disk space reported differently around OS X

Hello - I've got a 2012 MacBook Air with a 256GB SSD running OS X Mavericks 10.9.5.
When I view info about the hard disk, it shows as having 93GB free - however, when I view System Information, it says 48GB free.
45GB seems to have gone missing somewhere!
I've attached a screenshot showing both numbers.
I have done a repair permissions and repair disk using Disk Utility but no change.
Any ideas?
Thanks
James

Hello - I've got a 2012 MacBook Air with a 256GB SSD running OS X Mavericks 10.9.5.
When I view info about the hard disk, it shows as having 93GB free - however, when I view System Information, it says 48GB free.
45GB seems to have gone missing somewhere!
I've attached a screenshot showing both numbers.
I have done a repair permissions and repair disk using Disk Utility but no change.
Any ideas?
Thanks
James

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

SQL Query for Free Disk Space

Hi, I have a requirement to produce several custom free disk space reports based around groups. This will be on a 2012 R2 management group.  For a given group, does anyone know the SQL tables and the joins required to produce
both the free space % and free space MB in one query?
Thanks in advance,
Steve

what did you means of free space % and free space MB?
does it means the HD free or DB free space?
I assume that its means DB free space and you may refer to the following SQL statement
select Path, displayname,ObjectName, CounterName, avg(SampleValue) as Value, getdate() as date
   from Perf.vPerfRaw pvpr
   inner join vManagedEntity vme on pvpr.ManagedEntityRowId = vme.ManagedEntityRowId
   inner join vPerformanceRuleInstance vpri on pvpr.PerformanceRuleInstanceRowId = vpri.PerformanceRuleInstanceRowId
   inner join vPerformanceRule vpr on vpr.RuleRowId = vpri.RuleRowId
   WHERE ObjectName = 'SQLServer : Database'
   AND CounterName like 'DB Total Free Space%'
   AND pvpr.DateTime > DATEADD(minute, -60, GETUTCDATE())
   AND Path in (select DisplayName + ';MSSQLSERVER' from OperationsManager.dbo.RelationShip r with (nolock) inner join OperationsManager.dbo.basemanagedentity bme
with (nolock) on bme.BaseManagedEntityId = R.TargetEntityId
Where SourceEntityId in ( select BaseManagedEntityId from OperationsManager.dbo.basemanagedentity with (nolock) where DisplayName LIKE
'%SQL computer%') and r.IsDeleted=0)
group by Path, displayname,ObjectName, CounterName
Roger

The Case of the Disappearing Disk Space

Last week when I noticed I only had 5.5 gigs on my hard disk, I decided to start deleting files and programs that I didn't really need anymore. I ended up freeing up about 7 gigs! However, I have since noticed something peculiar...
As I use my computer (mostly browsing and e-mail, no other downloading), my hard disk mysteriously gets filled up. And I don't mean a few megabytes here and there, but rather more than two gigs in just a couple of days! This doesn't seem normal to me at all. Even if I do save files, they are usually just small Word documents for school. A few minutes ago, Finder said I had 10.7 gigs on my hard disk with the trash emptied. After I restarted, it said I had 13.15. Since then, I've already lost .02 gigs and the only programs I have open are Mail and Safari.
Can someone please explain to me what is happening here? Thanks!

Okay, my hard disk is at 12.71 now and a random .rtf file reads 8 kb. I'll check it later (if I am doing this right...)
You don't seem to be doing it correctly. Open TextEdit, create a new window, and note down the usage of disk space reported by WhatSize by typing it out into this window. After the amount of free space on the hard disk has decreased, run WhatSize again and note down what is reported this time. Compare the differences in the two sets of notes.
Another possibility is to choose Go to Folder from the Finder's Go menu, enter /private/var/vm/ as the folder's path, and keep an eye on the number of items in this folder as you use the computer.
(14861)

Available disk space is not right!

My 800MHz PowerPC G3 iBook running OS 10.3.9 reports 4.3GB available when I open up the harddisk drive icon. When I choose View/List from the drop down menu and give enough time to calculate all the folder sizes and add up the reported size for each folder the sum comes to only about 7GB or so. This can't be quite right. I have emptied the trash so there's nothing there. Software Profiler reports my Hard disk to have a capacity of 27.94GB. So where are the other 15-16GB? I'd really li to know.

really I'd rather spend the time doing something else!
I suggest you do just that, Sergio. The Finder will report the size of visible files and folders only. Quite a bit is occupied by invisible files (including virtual memory swap files).
The available disk space reported by the Finder is correct. It's amount will vary depending on numerous factors, including how long the computer has been up.
If you're that interested in looking at all the files on your hard disk, fire up Terminal and enter the following command:
<code>defaults write com.apple.finder ShowAllFiles TRUE</code>
and relaunch the Finder.
To revert back replace <code>TRUE</code> with <code>FALSE</code> in the above command.
WARNING! Do not delete or move any of the invisible files or folders. They are essential parts of the system software. Moving or deleting them may render your OS inoperable, if you don't know what you're doing.

SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

Hello everybody,
Sorry for my english, I write normaly in french, but we have more result in english.
I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
I creat a specific management pack juste for the rule and the views.
SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
SNMP Service (Windows service) => Disabled
SNMP trap (Windows service) => Disabled
Health Service (Windows service) => Enabled
Port 162 UDP => Open and listenning by the MonitoringHost.exe
Firewall rules => Everythinks is OK
SNMP Trap send version is => 2c
SNMP Monitoring device version is => 2c
I try too many of solution on different web site like :
http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
http://technet.microsoft.com/en-us/library/hh563870.aspx
http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
Thank you in advance.
KimBaxZ
Computer expert system technology

Hello Yan Li,
I read your link, and I found this :
The network devices must be discovered and registered as ICMPSNMP devices.
And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
Have a nice day
Best regards
KimBAxZ
Computer expert system technology

SCOM 2012 - Custom disk space report - Computer Groups

Similar Messages

Maybe you are looking for