SCOM 2012 Data Access Service could not start

Hello,
I have 3 SCOM 2012 servers. I got the error that the All Managament Server Pool is not available. Google search give me a lot of posts to add folder PoolManager at HKLM\System\CurrontControlSet\services\HealthService\Parameters with the DWORD keys PoolLeaseRequestPeriodSeconds
600 and PoolNetworkLatencySeconds 120. After restarting last SCOM server the Data Access Service could not run "Windows could not start the System Center Data Access Service. Error 1053: The service did not respond to the start or control request in a
timely fashion"
At Operations Manager Eventlog I see an error: "OpsMgr Management Configuration Service failed to communicate with System Center Data Access Service due the following exception: System.Runtime.Remoting.RemotingException: Unable to get ISdkService interface.
Please make sure local Sdk Service is running."
At System Eventlog I see an error: "A timeout was reached (30000 milliseconds) while waiting for the System Center Data Access Service service to connect."
Why did it run on the both other servers and failes on the third one? What can I check?
Regards, Doreen

Hi,
According to my understanding, after editing the registry key value, two of three management servers work fine now, and the issue only occur to the third one. Whether all those servers are running with Windows server 2012?
I would like to suggest you re-check the service account for the data access service, maybe we can re-enter the account credential. Those three servers may use the same account for the service, make sure the account is not disabled and you enter in the right
password for it.
Here is a similar thread, please go through it for more details:
http://social.technet.microsoft.com/Forums/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
In addition, please also restart the third server and check the result, and I know that there is a similar error message in SCOM 2007:
http://blogs.technet.com/b/csstwplatform/archive/2012/01/02/scom-2007-r2-unable-to-open-the-scom-console-after-server-reboot-the-sdk-service-is-stopped.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Data Acces Service could not start

Hi everyone,
Completely accidentally, putting manually Agent Control Panel settings on the management server then we have restarted the Microsoft monitoring agent service.
After having realizing our mistake, we have removed all these settings(it should be empty in the management server), but then some problems occurred on the server and data access service does not start again. There are 2 management servers at the environment
and we are having the same problem on both servers.
For example, the following event is seen on the event viewer, i know the description is not normal.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.ConfigurationReaderException: Feature of type 'Microsoft.EnterpriseManagement.ServiceDataLayer.IDBVersionCheckFeature, Microsoft.EnterpriseManagement.DataAccessService.OperationsManager, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
cannot be added to the container. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.SwitchHSToOM12Mode()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.InitializeDBVersionChecker()
   at Microsoft.EnterpriseManagement.SingletonLifetimeManager`1.GetComponent[K]()
   at Microsoft.EnterpriseManagement.FeatureContainer.GetFeatureInternal[T](Type type, String featureName)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.ReadFeatures(XPathNavigator navi, IContainer container)
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.Process()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart(Object obj)
Also, when we control, at the registry   [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Server Management Groups] keys are dissapearing!
When we created the keys manually, data access service is starting and console is opening. But when we restart either Microsoft monitoring agent service or the server these keys are dissapearing again.
Any help!
Yavuz Eren Demir

Hi Yan,
I also continued to analyze at the lab environment. But, the following key cannot seem on the new established server:
(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups)
Are you sure that you have it? This key must not be seen on the management servers.
By deleteing this key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups) and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\management Groups\ for group (was empty) copying
the keys out of the working management servers, I realized that problem is over.
Thanks
Yavuz Eren Demir

Data Access Service SPN Not Registered alert in SCOM, while i have registered the SPN on the service account

Hi Guys,
I get an SPN error for the Data Access Service. But i have registered the SPN's to the account.
Why does Opsmgr still gives this Alert:
Kind regards,
André

This is because by default Domain User accounts don’t have the ability to update their own SPNs.
To set your SPN correctly use the following commands with a user who has Domain Admin privileges:-
setspn –A MSOMSdkSvc/SERVERNAME DOMAIN\USERNAME
setspn –A MSOMSdkSvc/SERVERNAME.fqdn.name DOMAIN\USERNAME
If you wish to check that SPN registration has been set up correctly use:-
setspn -L DOMAIN\USERNAME
Also you can refer below link
http://www.systemcentercentral.com/forums-archive/topic/scom2012-spn-registration-error/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

NAS SSO service could not started.

Hi
I have a problem that i am unable to start the SSO service onto the one of my NAS server in inline mode but the service is running fine on my two NAS which are deployed on OOB mode.
It gives error that could not start the service please chk configurations . As i checked the nas_server.log logs i get the following error does any one have some idea abt it
DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04
2010-09-21 12:02:16.997 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04:DURATION=0
2010-09-21 12:02:17.003 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234
2010-09-21 12:02:17.003 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234:DURATION=0
2010-09-21 12:02:17.008 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com
2010-09-21 12:02:17.009 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com:DURATION=1
2010-09-21 12:02:17.014 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC.AD.ICI.COM
2010-09-21 12:02:17.014 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC.AD.ICI.COM:DURATION=0
2010-09-21 12:02:17.019 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:save
2010-09-21 12:02:17.021 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION=2
2010-09-21 12:02:17.026 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer
2010-09-21 12:02:17.026 +0500 WARN com.perfigo.wlan.jmx.adsso.GSSServer               - Server was not running ...
2010-09-21 12:02:17.026 +0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - Server starting server ...
2010-09-21 12:02:17.026 +0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - SPN : [shkcas04/[email protected]]
2010-09-21 12:02:17.026 +0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - building kdc list for domain pkshv002.apac.ad.ici.com
2010-09-21 12:02:18.470 +0500 DEBUG com.perfigo.wlan.ssl.SSLLog                        - RMISocketFactory:adding socket:d3c940[TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.92.15.1,port=15873,localport=1099]]
2010-09-21 12:02:25.695 +0500 TRACE com.perfigo.wlan.jmx.admin.FailSafeManager         - FailSafeManager is running:{0.85,0.3,[0:0:15]}:DETECT_INTERVAL=20:DETECT_TIME_OUT=300
2010-09-21 12:02:25.695 +0500 TRACE com.perfigo.wlan.jmx.admin.FailSafeManager         - FailSafeManager has nothing to do ...10.92.15.1:0:1
2010-09-21 12:02:25.695 +0500 TRACE com.perfigo.wlan.jmx.admin.FailSafeManager         - FailSafeManager is going to sleep: {0.85,0.3,[0:0:0]} delay=20000
2010-09-21 12:02:37.022 +0500 ERROR com.perfigo.wlan.jmx.adsso.GSSServer               - Unable to start server ... pkshv002.apac.ad.ici.com
2010-09-21 12:02:37.022 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION=19996
2010-09-21 12:02:37.061 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0
2010-09-21 12:02:37.061 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - setAttribute: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0:DURATION=0
2010-09-21 12:02:37.066 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:save
2010-09-21 12:02:37.067 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION=1
2010-09-21 12:02:39.598 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - isRegistered: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo
2010-09-21 12:02:39.598 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - isRegistered: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:DURATION=0
2010-09-21 12:02:39.603 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - unregisterMBean: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo
2010-09-21 12:02:39.603 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - unregisterMBean: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:DURATION=0
2010-09-21 12:02:39.608 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - createMBean: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type=MLet,name=casLoader
2010-09-21 12:02:39.609 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - createMBean: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type=MLet,name=casLoader:DURATION=1
2010-09-21 12:02:39.615 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke: DefaultDomain:type=com.perfigo.wlan.jmx.admin.ServerInfo:init
2010-09-21 12:02:39.615 +0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper             - BeanServerWrapper - invoke:
Regards
Waqas

Dear Faisal ,
yes i can ping my ADs .As i am not a microsoft guy but ill try to explain it as best as i can the structure of AD
we have a Parent AD and two child AD. We are creating a user on parent AD but running KTPass on child and it is running .Now this actually worked for one of our server but this server is giving us the problem.
Regards
Waqas

Oracle10g Installation Error isqlplus service could not start

I have successful installed Oracle10g on Windows 2000 Professional on a machine with no previous installation of Oracle.
I uninstall Oracle9i on another machine with Windows 2000 Professional using the Universal Installer, run regedit to remove Oracle under Software; stop all Oracle Services; delete the oracle physical folder.
I restart the PC and install Oracle 10g, but the following error appear:
Could not start the OracleOraDb10g_home1iSQL*Plus service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
I neglect this error and continue the installation. All services work, e.g. sqlplus, and Enterprise Manager
http://localhost:5500/em works except
isqlplis on http://localhost:5560/isqlplus
I check the Control Panel's Administrative Tools, Services and found that OracleOraDb10g_home1iSQL*Plus is starting, but you cannot stop or start it. What happens?
Is there a way to seolve this problem?

I resolve this problem caused by JAVA_HOME path of the Windows 2000's System Variable by changing it to map to c:\oracle\product\10.1.0\Db_1\jdk and then OracleOraDb10g_home1iSQL*Plus service can start successfully on Local Computer

DQE Service could not started.

Hi All,
I installed WAS 6.40 SP7 and then EP6 SP6 on Windows Platform. Installation was successfull.
But when I tried to create Database iViews, its not opening the tables for the configured DB. Then i tried to open in Portal content page...
System Administratation ---> Distributed Query Engine
here when i open
* Configuration -> No content is displayed.
Session Manager -> DQE not installed(this messge is displayed)
MetaData Loader -> Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.distributed_query_engine/com.sap.portal.metadata_loader
Component Name : com.sap.portal.dqe.admintool.metadataloader.DQEMetadataLoader
The exception was logged. Inform your system administrator..
Exception id: 10:57_08/11/04_0002_9138850
See the details for the exception ID in the log file.
When i check the defalutTrace*.trc, the following message is printed...
#1.5#00508BE9307C00170000006000000DA40003E86216ECCFF0#1099932919156#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_49##0#0#Error#1#/System/Server#Plain###Service DQE error. Nested exception is: com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.
at com.metamatrix.sap.service.MetaMatrixServiceFrame.start(MetaMatrixServiceFrame.java:144)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:134)
I fallowed the same instructions given in the installation guide, and insalled in two different machines,in both places I got same problem.
Can any body tell me solution for this problem.
When installing EP6SP3 I have choosen Portal Platform option(where we have DQE schema installation and Portal Platform option) and then updated to EP6SP6.Is it rigt?
From SDN site I got WAS with SP7 and EP with SP6 , if any new stable versions available please let me know from where I can get them.
Regards
Abhilash

Hello.
I have the same problem and when I go into Visual Admin and try to start DQE manually I receive the following error: Any help would be greatly appreciated.
Start service DQE
java.rmi.RemoteException: Could not start service DQE on cluster ID 6654350; nested exception is:
     com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Service DQE error. Nested exception is: com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.
     at com.metamatrix.sap.service.MetaMatrixServiceFrame.start(MetaMatrixServiceFrame.java:144)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Service DQE error. Nested exception is: com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Could not start DQE service, reason: Could not initialize RuntimeStateAdminAPIImpl.
     at com.metamatrix.sap.service.MetaMatrixServiceFrame.start(MetaMatrixServiceFrame.java:144)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)

Oracel Management Service could not start

On Windows 2000, running Oracle8i Enterprise 8.1.6
When I try to start Management Service I get Error 997: Overlapped I/O operation is in progress.
Any ideas

Please let mw know if you ever found the cause because I am having the same problem.

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

EM console - Could not start the OracelDBConsoleSID service

Oracle 10g, Windows Server 2003
I have problem with EM console. When I restart machine OracleDBConsoleSID is stopped.
When I try to start this service:
Could not start the OracelDBConsoleSID service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
And then this service has status: Staring. EM then work for short time but then again service is stopped.
The Database works without any problems.
Please help!
Thanks in advance

When I try to start the service with CMD:
c:\oracle\product\10.2.0\db_1\BIN>net start OracleDBConsoleSID
The OracleDBConsoleSID service is starting.........................................................................
The OracleDBConsoleSID service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
+++++++++++++++++++++++++++++
In Events - Aplication:
Type: Error
Category: Disk
Event_ID: 6
Description:
An error occured while trying to initialize the service
++++++++++++++++++++++++++++++
======================================
In EM log files…
In OracleDBConsoleSIDsrvc.log
-------------- [OracleDBConsoleSID] ------------
EMDROOT=c:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\...._SID
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
02/25/10 14:15:45 Job Process API is available
02/25/10 14:15:45 Start pending...
02/25/10 14:15:45 Verifying dbconsole is not started already. Command line "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
02/25/10 14:15:56 dbconsole launch commandline is "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
02/25/10 14:15:56 Tracking process launch...
02/25/10 14:16:31 Received exitCode 1 from emctl istatus
02/25/10 14:16:40 Received exitCode 1 from emctl istatus
02/25/10 14:26:24 Received exitCode 1 from emctl istatus
02/25/10 14:26:32 Received exitCode 1 from emctl istatus
02/25/10 14:26:37 Timedout while tracking process to start. Terminating..
In emdctl.trc
2010-02-25 14:26:16 Thread-3200 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:24 Thread-320 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:24 Thread-320 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:32 Thread-2832 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:32 Thread-2832 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:36 Thread-3048 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:36 Thread-3048 ERROR http: 1736: Unable to initialize ssl connection with server, aborting connection attempt
In emagent.trc
2010-02-25 14:26:11 Thread-2240 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:11 Thread-2240 ERROR http: 1152: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:11 Thread-2240 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://...:5501/em/upload/: retStatus=-1
2010-02-25 14:26:20 Thread-2508 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:20 Thread-2508 ERROR http: 1148: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:20 Thread-2508 ERROR command: nmejcn: failed http connection to https://...:5501/em/upload/: retStatus=-1
Edited by: user9106065 on Feb 25, 2010 8:53 AM

Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------

Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein

System Center Service Manager Data Access Service Start Up Failure Due to SQL Configuration Change to Mix Mode

Our SCSM Management Console, SCSM web Portal, every thing is down after we change SQL Authentication to Mix Mode Windows and SQL. After this we had revert back to Windows Authentication Single Mode and delete that account who was having DB_Owner access.
Please help to resolve this issue. Thanks in advance
Sajid H. A. Rashid Analyst Application Developer

strange...
What do you mean by everything is Down? Is the SDK (data access) service able to start?
http://codebeaver.blogspot.dk/

System Center Data Access Service

I am having issues with a new management server in our environment. We are continually getting the following error -
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
We have a handful of other Management servers in our environment that do NOT have any issues. This management server lives in a Hyper-V environment as do all other management server with the exception of 1. The OperationsManager and Operations Manger DW
live on Hyper-V as well.
Just getting this management server installed has been a bare to say the least, using the GUI install would simply rollback due to the fact that setup could not get the DataReader/DataWriter account information, so we were forced to install via cmd line.
During setup while monitoring the install logs it attempted to start the SDK service which I will say is a Domain Account. Each of the 4 attempts resulted in he Data Access service is either not running or not yet initialized.
We have attempted the ServicesPipeTimeout registry fix and that didn't work.
I am looking for some guidance on where I should look as to a "root" issue, any help at this point is appreciated.

try the following
http://www.rickygao.com/the-investigation-idea-in-data-access-service-error-in-my-scom-2012/
http://social.technet.microsoft.com/Forums/windows/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
Regards, Ibrahim Hamdy

SCOM 2012 Issue The Data Access service is either not running or not yet initialized

Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

SCOm data access service not started

Hi all
my SCOM server was down and i checked once it is up and found Data access service is stopped, when i tried to start the service i am getting following error, Please help.
The System center Data Access service on local computer started and the stopped , Some services stopped automatically if they are not in use by other services or programs.

Please post the error on eventviewer related to this issue.
Check userlogon on this services take db_owner permission on SQL to can run services
Also you can refer below link for this issue
http://scug.be/dieter/2014/01/16/scom-system-center-data-access-service-stops-event-26380-33333/
http://blogs.technet.com/b/servicemanager/archive/2011/10/04/system-center-data-access-service-start-up-failure-due-to-sql-configuration-change.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

SCOM 2012 Data Access Service could not start

Similar Messages

Maybe you are looking for