SCOM 2012 Installation problem - SQL Instance name

Hi All
Strange problem here, I wonder if anyone else has had the same issue.
I have a two-node SQL Server 2014 (Enterprise) Database server configured with a "SQL AlwaysOn Availability Group & Listener". The listener DNS name is: sql-ag-listener
On a separate server VM I attempted to install SCOM 2012 R2 - but when it came to the setup prompt to enter the "Servername & Instance" for the SQL server / Databases it will not accept my SQL AG Listener DNS name. However if I enter any
of the two individual SQL node names (SQL1 or SQL2) then it does accept those values and proceeds with the setup wizard. I do have a DNS entry for the SQL AG name.
All VMs are hosted in Azure. The SQL Servers are in their own Cloud Service and the SCOM MS Servers are in their own Cloud service.
I tried moving one of the SCOM MS Servers to the same Cloud Service container as the SQL Servers - still the same result.
Interestingly (as a test) - I started the SCOM 2012 Installation wizard on one of the SQL Servers and it DID accept the SQL AG value as the "Servername & Instance".
No firewalls are on. The VM endpoints allow SQL port 1433. Also, I can Telnet to the SQL Servers using 'telnet > O sql-ag-listener 1433' - response = Connected....
Not sure why this wont accept my virtual SQL AG name....?
thanks

Hi,
As when you install SCOM on one of your SQL server, then the AG name can be resolved, so it seems like this issue related with network resolution.
On the server where you want to run SCON setup, please use NSLOOKUP command to make sure it can the AG name to an IP address.
In addition, when you run the setup, don't select reporting server, as reporting server role need to install on a SQL server holding SSRS.
We still can install SCOM on normal database, and then add them into availability group later:
Add SCOM Databases to Availability Groups
http://www.tech-coffee.net/alwayson-part-8-methods-to-add-database-scom/
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • SCOM 2012 Install problems - SQL Server 2012

    I am trying to install SCOM 2012 R2 on Server 2012. I cannot connect to sql the log file shows below. I have SQL 2012 installed and patched. Has anyone seen this before?
    [15:18:16]: Always:
    :DatabaseConfigurationPage: Attempting to connect to database using server\instance itp-operations\mssqlserver. If we need it, the port is 1433
    [15:18:16]: Debug:
    :MSSQLSERVER on server itp-operations is in a running state
    [15:18:16]: Info:
    :Info:Opening/Testing Sql Connection on itp-operations, port: 
    [15:18:16]: Debug:
    :Connection was not open.  We will try to open it.
    [15:18:16]: Debug:
    :SqlConnectionReady returned True.
    [15:18:16]: Debug:
    :MSSQLSERVER on server itp-operations is in a running state
    [15:18:16]: Debug:
    :Connection was not open.  We will try to open it.
    [15:18:16]: Debug:
    :SqlConnectionReady returned True.
    [15:18:16]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [15:18:16]: Info:
    :SQL Product Level: RTM
    [15:18:16]: Info:
    :SQL Edition: Standard Edition (64-bit)
    [15:18:16]: Info:
    :SQL Version: 11.0.2100.60
    [15:18:16]: Always:
    :Current Version of SQL=11.0.2100.60   Required Version=10.50.2500.0
    [15:18:16]: Always:
    :Entering GetRemoteOSVersion.
    [15:18:16]: Info:
    :Info: remoteOS = 6.3.9600
    [15:18:16]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [15:18:16]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [15:18:16]: Info:
    :The SQL Collation is valid.
    [15:18:16]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [15:18:16]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [15:18:16]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Hi,
    Please turn off firewall and retry it.
    In addition, please also follow the below two links when installing SCOM 2012:
    Walkthrough: Installing Operations Manager on a Single Server
    http://technet.microsoft.com/en-us/library/hh457006.aspx
    OpsMgr 2012: a quickstart deployment guide
    http://blogs.technet.com/b/kevinholman/archive/2012/04/26/deploying-opsmgr-2012-a-quick-start-guide.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • SCOM 2012 Installation fails while deploying Datawarehouse

    Hi All,
    I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
    When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
    During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
    Screenshots:
    Error logs
    Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
    [01:08:57]: Error:
    :Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
    TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724. 
    [01:08:57]: Error:
    :InnerException.StackTrace:
    Server stack trace: 
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    [01:08:57]: Error:
    :Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
    [01:08:57]: Error:
    :InnerException.StackTrace:   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    [01:08:57]: Always:
    :Management Server My management server failed to connect, now trying another one.
    [01:08:57]: Warn:
    :Failed to connect to any SDK in the management group, trying again
    [01:09:17]: Info:
    :Info:trying to connect with server My management server
    [01:09:26]: Info:
    :Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
    [01:09:26]: Error:
    :Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
    Check the event log for more information.
    [01:09:26]: Error:
    :StackTrace:   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
    [01:09:26]: Error:
    :Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
    TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724. 
    [01:09:26]: Error:
    :InnerException.StackTrace:
    Server stack trace: 
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    [01:09:26]: Error:
    :Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
    [01:09:26]: Error:
    :InnerException.StackTrace:   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    [01:09:26]: Always:
    :Management Server My management server failed to connect, now trying another one.
    [01:09:26]: Warn:
    :Failed to connect to any SDK in the management group, trying again
    [01:09:46]: Error:
    :Error:Could not connect to management group. Can not continue with DW upgrade...
    [01:09:46]: Info:
    :Info:got MG connection
    [01:09:46]: Error:
    :Error:Could not connect to management group. Cannot continue with current action...
    [01:09:46]: Error:
    :FATAL ACTION: GetManagementGroup
    [01:09:46]: Error:
    :FATAL ACTION: DWInstallActionsPostProcessor
    [01:09:46]: Error:
    :ProcessInstalls: Running the PostProcessDelegate returned false.
    [01:09:46]: Always:
    :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [01:09:46]: Error:
    :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    [01:09:46]: Info:
    :SetProgressScreen: FinishMinorStep.
    [01:09:46]: Always:
    :!***** Installing: OMCONSOLE ***
    [01:09:46]: Info:
    :ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    [01:09:46]: Always:
    [01:09:46]: Always:
    :****Starting*RollBack*******************************************
    [01:09:46]: Always:
    [01:09:46]: Info:
    :SetProgressScreen: StartMinorStep.
    [01:09:46]: Info:
    :SetProgressScreen: StartMinorStep.
    [01:09:46]: Debug:
    :ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor.  Launching it now.
    [01:09:46]: Always:
    :Determining actions to be run.
    [01:09:46]: Always:
    :Done validating action list; now running individual actions.
    [01:09:46]: Always:
    :Current Action: UninstallPrePreprocessor
    [01:09:46]: Info:
    :UninstallPrePreprocessor completed.
    [01:09:46]: Always:
    :Current Action: UpgradePreprocessor
    [01:09:46]: Info:
    :UpgradePreprocessor completed.
    [01:09:46]: Always:
    :LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:  
    [01:09:46]: Info:
    :SetProgressScreen: Init Exe Install progress.
    [01:09:47]: Always:
    :LaunchExeSetup: Install return value was: 0
    [01:09:47]: Info:
    :CheckPointPassed is removing the Rollback property as this is an uninstall.
    [01:09:47]: Always:
    :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
    Gautam.75801

    Hi All,
    So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
    In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
    Legend: SCOM Server - SCOMSVR.Contoso.com
    DNS Domain: Contoso.com
    SDK Account: SDKSVC
    To add SPN for the SDK Service:
    ===================================
    In Win2k 12
    setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
    setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
    Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
    setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
    In Win2k8
    setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
    setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
    Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
    setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
    To verify the SPN's
    ============================
    1. setspn -L MS Host name without FQDN
    Ex: setspn -L SCOMSVR
    2. setspn -L Domain\DSK Action account
    Ex: setspn -L Contoso\SDKSVC
    Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
    1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L  SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
    Example: The below entry should not appear when you enter setspn -L SCOMSVR
    MSOMSdkSvc/SCOMSVR
    MSOMSdkSvc/SCOMSVR.contoso.com
    If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
    If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
    Ex: MSOMSdkSvc/SCOMSVR
    MSOMSdkSvc/SCOMSVR.contoso.com
    MSOMSdkSvc/SCOMSVR.contoso.com
    MSOMSdkSvc/SCOMSVR
    To delete a SPN if required:
    ===============================
    setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
    setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
    Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
    setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
    Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
    Gautam.75801

  • CAD SQL Instance Name match

    Looking for clarification on CAD installation with SQL Data Store. The CAD Installation Guide states "It is required that your system include a separate SQL Server instance that hosts the CAD base services (on both servers in a replicated system). This is under the Configuring Microsoft SQL Server 2005 for CAD section.
    Do the SQL instance name for the side A and B servers need to match ? I believe the answer is yes but want to make sure.

    Yes, use the same name.  A few steps down there is the statement:
    "NOTE: It is recommended that you name the SQL instance that CAD will use CADSQL. Although, you can name this SQL instance anything you would like, the directions for this guide are written for use with CADSQL. You might have to deviate from these instructions if you do not use the name CADSQL."

  • Get current SQL instance name with PowerShell

    Hi all,
    I'm preparing SQL agent job that will backup all jobs on SQL server. Main step is PoswerShell script. I want that job to be universal for all servers. The first parameter that I need to send to script is instancename.
    I want to use variable as InctanceName parameter. So, when I run this job on particular server this variable must get current SQL instance name.
    I can use $env:computername for default instances but I cannot use it with named instances or with clustered instances. Some solutions like using 'HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL' keys won't work because of number of
    instanses can be running on one machine.
    How to get only current SQL instance name?

    Hi, 
    Thank you for your answers.
    I found this solution:
    $serverInstance = "$(ESCAPE_DQUOTE(SRVR))"
    Working perfect.

  • How to get Host name and SQL Instance Name by T-SQL

    I am using SQL 2000, 2005 and 2008. I have few multi instances SQL servers. I would like to gather following information:
    Host Name
    SQL Instance Name
    SQL Version
    Server1
    Server1
    SQL 2000
    Server1
    Server1\ABC
    SQL 2005
    Server1
    Server1\XYZ
    SQL 2008
    Server2
    Server2
    SQL 2008
    Is there any way I can get it by T-SQL? Any help would be appreciated.
    Thanks
    Saumen 

    SELECT
    SERVERPROPERTY('MachineName') AS [ServerName],
    SERVERPROPERTY('ServerName') AS [ServerInstanceName],
    SERVERPROPERTY('InstanceName') AS [Instance],
    SERVERPROPERTY('Edition') AS [Edition],
    SERVERPROPERTY('ProductVersion') AS [ProductVersion],
    Left(@@Version, Charindex('-', @@version) - 2) As VersionName
     |
    Blog: MSBICOE.com |
    MCITP - BI, SQL Developer & DBA
    Hate to mislead others, if I'm wrong slap me. Thanks!

  • SCOM 2012 Installation does not show the SQL Server Instance for reporting services

    I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
    In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
    Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
    Regards,
    Paul Mendoza.

    Hi Paul
    Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
    For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
    - run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
    - run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
    Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together. 
    Cheers
    Graham
    New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)

    Hi everyone,
    I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
    has window 7 OS , 80 GB freen HD  and 6 GB RAM. ) Therefore I  download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
    But during installation of SQL server  I have problem ...it says
    the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
    The database engine  also not installed displaying same error.
    I don't know how can i install sql server 2012 to use with visual studio in same computer.
    Can somebody please help with SQL installation please ?
    It will be great help.
    Many thanks in advance 
    regards
    rash

    Hi 
    my summary file is :
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2146232832
      Start time:                    2015-04-06 11:34:18
      End time:                      2015-04-06 19:04:46
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for DQ:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for IS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for RS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for AS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  RASHA-VAIO
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
      SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services                 1033      
              Express Edition      10.1.2531.0     No        
      SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication                   1033      
              Express Edition      10.1.2531.0     No        
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         E:\x64\setup\
      Installation edition:          Enterprise
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
      ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
      ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  TABULAR
      ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            RASHA-VAIO\RASHA
      ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   MAIN
      CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
      CLTSTARTUPTYPE:                Manual
      CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               Manual
      CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     RASHA-VAIO\RASHA
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT Service\MsDtsServer110
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSHPINSTALLMODE:              SharePointFilesOnlyMode
      RSSVCACCOUNT:                  NT Service\ReportServer
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  Latin1_General_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           RASHA-VAIO\RASHA
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    1
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Passed
      Feature:                       Client Tools Connectivity
      Status:                        Passed
      Feature:                       Client Tools SDK
      Status:                        Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Passed
      Feature:                       Management Tools - Basic
      Status:                        Passed
      Feature:                       SQL Server Data Tools
      Status:                        Passed
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Data Quality Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Master Data Services
      Status:                        Passed
      Feature:                       Distributed Replay Client
      Status:                        Passed
      Feature:                       Distributed Replay Controller
      Status:                        Passed
      Feature:                       Integration Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Integration Services
      Component error code:          0x84BB0001
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Data Quality Client
      Status:                        Passed
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Reporting Services
      Component error code:          0x84BB0001
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Analysis Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Analysis Services
      Component error code:          0x80131600
      Error description:             The service could not be started. Reason:  The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
      Feature:                       Reporting Services - SharePoint
      Status:                        Passed
      Feature:                       Reporting Services Add-in for SharePoint Products
      Status:                        Passed
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       Documentation Components
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
    I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
    thank you

  • SCOM 2012 - How does SQL MP "know" which instances are available and active?

    Using SCOM 2012 R2 with Microsoft's SQL MP 6.5.1.
    Getting alerts occasionally for issues with SQL instances which are later found to be not active any more or removed from the SQL server.
    Can someone explain how the MP determines which SQL instances are available?  Is it a matter of simply reading folder structures on the various mount points, reading registry?  Much appreciated for any tips.

    SCOM SQL MP will using discovery to discovery SQL instance. Once the SQL instance is discovery, the SQL instance object persist in the database even though the SQL instance is removed.
    Solution:
    To clean up the objects you can run the Remove-SCOMDisabledClassInstance Powershell cmdlet. Then all the relationships that involve objects related to a disabled discovery is deleted.
    Roger

  • SCCM 2012 installation problem..prerequisite fails

    Hi there, 
    I am trying to install SCCM 2012 on Server 2012 and its seems that the prerequisite checker fails on 3 checks, all related to SQL. 
    SQL Server service running account
    required SQL Server Collation
    SQL Server sysadmin rights
    And I wonder how exactly the installation of SCCM 2012 is looking for the SQL Server?
    Is it through Active directory? What if i had 4 different SQL Servers. How can he knows where to look his server?
    I do not remember that i entered during the wizard any SQL Server name. 
    I think i am getting those errors because, the installation can't find any SQL Server. 
    I have 3 Virtual machines: 
    1. Server 2012 as DC
    2. Server 2012 as SQL Server 2012 RTM with CU3
    3. Server 2012 as Sccm 2012 R2 x64 
    Any ideas how to troubleshoot this problem?
    Log file
    https://onedrive.live.com/redir?resid=D99573B9FC48B9D4!266&authkey=!AId9aroJCts64AM&ithint=file%2c.log
    Thank you very much
    Amir

    Try removing Use typical installation options for a stand-alone primary site option.
    When using this option, Setup automatically configures the site as stand-alone primary site, uses a default installation path, a
    local installation of the default instance of SQL
    Server for the site database, a local management point, a local distribution point, and configures the site with English and the display language of the operating system on the
    primary site server if it matches one of the languages that Configuration Manager supports.
    http://technet.microsoft.com/en-us/library/gg712320.aspx

  • SCOM 2012: Report Viewer / SQL Server 2012 CLR??

    Hello,
    I am trying to install an Operations Console to a Management Server and it request
    1. Report Viewer
    Then I tried to install Report Viewer then it requests:
    Microsoft System CLR Types for SQL Server 2012
    These are ne for SCOM 2012?
    I check the MS in SCOM 2007 R2 there is no SQL module installed...
    Any clue?
    How to install this report viewer is it included in another product? Should I use SQL ?
    I don't have any SQL module on this management server
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi,
    I hope this can help you:
    http://thoughtsonopsmgr.blogspot.dk/2013/10/upgrading-to-scom-2012-r2-rtm-report.html
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • MSSQL problem SQL instances on different Ports.

    Hi,
    I have a problem connecting to sql instances on different ports.
    Example:
    I have an sql databaserver = DATABASE
    1st instance on this server = instance1 (running on port 1160)
    2nd instance on this server = instance2 (running on port 1260)
    If I want to connect to instance1 - i create the following conn.info line :
    MSSQL_SERVER = DATABASE\instance1
    But for some reason, I doesn't connect to the instance1... I can do a dataconnection to "MSSQL_SERVER = DATABASE", but can no redirect it to "DATABASE\instance1"
    Ideas ?
    Thanks,
    Jorgen

    Is it possible for the two instances on the same machine to participate in
    the same cluster? I believe servers in a cluster must share the same port
    (which is also used for multicasting). Does a virtual IP address need to be
    configured?
    "Per Jessen" <[email protected]> wrote in message
    news:[email protected]..
    >
    >
    Sreedhar Vankayala wrote:
    Hi,
    I am planning to run multiple weblogic instances on different ports on
    the
    same machine. Is it possible ? If so, how ?Assuming you are using WLS6.x, simply define as many servers as needed andgive
    them different ports to listen to. This is easily accomplished using theWLS
    Admin Console.
    Then start individual weblogic processes using this config file.
    regards,
    Per Jessen, Zurich.

  • SAP Netweaver 7.02 installation problem, "Start Instance" not possible??

    Hello,
    i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
    here should the instance started, i receive this error:
    "An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
    I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
    "Running but dialog queue stand still."
    That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
    I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
    Can anyone help me here please?
    If need more information i can put here some logfiles?
    Thanks for any help
    Mirso

    Here is the next file dew_w0:
    trc file: "dev_w0", trc level: 1, release: "720"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        NSP
    M systemid   562 (PC with Windows NT)
    M relno      7200
    M patchlevel 0
    M patchno    46
    M intno      20020600
    M make       multithreaded, Unicode, 64 bit, optimized
    M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
    M pid        6896
    M
    M 
    M Thu Aug 07 20:23:20 2014
    M  kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
    M  length of sys_adm_ext is 588 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c   1314]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm)        31696    (2264)
    M  DpShMCreate: sizeof(tm_adm)        5517056    (27448)
    M  DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
    M  DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
    M  DpShMCreate: sizeof(comm_adm)        584080    (1144)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
    M  DpShMCreate: sizeof(slock_adm)        156064    (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
    M  DpShMCreate: sizeof(file_adm)        268880    (80)
    M  DpShMCreate: sizeof(vmc_adm)        30128    (2152)
    M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)    48
    M  DpShMCreate: sizeof(j2ee_adm)    3936
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
    M  DpShMCreate: allocated sys_adm at 000000000DD90060
    M  DpShMCreate: allocated wp_adm_list at 000000000DD93030
    M  DpShMCreate: allocated wp_adm at 000000000DD93220
    M  DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
    M  DpShMCreate: allocated tm_adm at 000000000DD9AE50
    M  DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
    M  DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
    M  DpShMCreate: allocated comm_adm at 000000000E2FD180
    M  DpShMCreate: allocated slock_adm at 000000000E38BB20
    M  DpShMCreate: allocated file_adm at 000000000E3B1CD0
    M  DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
    M  DpShMCreate: allocated vmc_adm at 000000000E3F37E0
    M  DpShMCreate: allocated gw_adm at 000000000E3FADA0
    M  DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
    M  DpShMCreate: allocated ca_info at 000000000E3FBD50
    M  DpShMCreate: allocated wall_adm at 000000000E3FBD70
    M  DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
    M  DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  DpVmcSetActive: set vmc state DP_VMC_ENABLED
    M  DpVmcSetActive: set vmc state DP_VMC_ACTIVE
    M  DpVmcInit2: o.k.
    M 
    M Thu Aug 07 20:23:21 2014
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Thu Aug 07 20:23:23 2014
    M  ThInit: running on host BIG
    M 
    M Thu Aug 07 20:23:24 2014
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
    B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
    B  New connection 0 created
    C 
    C  DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.045) Unknown primary key (note 1459400)
    C    (0.039) Define your own command buffersize (note 1340617)
    C    (0.031) Dbm commands support added (note 1420733)
    C    (0.027) Count of records for bulk insert optimized (note 1340617)
    C    (0.021) Connect with special xuser key (note 1390464)
    C    (0.018) Error handling for external update statistics changed (note 1340617)
    C    (0.018) Dbsl procedure to update datasource information (note 1340617)
    C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
    C    (0.013) Possibility to disable UPSERT statements (note 1340617)
    C    (0.013) Check for external update statistics changed (note 1340617)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C 
    C Thu Aug 07 20:23:25 2014
    C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
    C  SQLDBC SDK     : SQLDBC.H  7.7.4    BUILD 009-123-173-450
    C  SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
    C  SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
    C  SQLDBC supports new DECIMAL interface : 1
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports VARIABLE OUTPUT data  : 1
    C  SQLDBC supports Multiple Streams      : 1
    C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1
    C  SQLDBC supports LOB LOCATOR COPY      : 1
    C  SQLDBC supports BULK SELECT with LOBS : 1
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
    C  Database release is SAP DB 7.8.01.014
    C  INFO : Database 'NSP' instance is running on 'minisap'
    C  DB supports UPSERT SQL syntax : 1
    C  DB supports new EXPAND syntax : 1
    C  DB supports LOB locators      : 1
    C  DB uses MVCC support          : 0
    C  DB max. input host variables  : 2000
    C  INFO : SAP DB Packet_Size = 131072
    C  INFO : SAP DB Min_Reply_Size = 4096
    C  INFO : SAP DB Comm_Size = 126976
    C  INFO : DBSL buffer size = 126976
    C  INFO : SAP DB MaxLocks = 300000
    C  INFO : Connect to DB as 'SAPNSP'
    C  Command info enabled
    C  Now I'm connected to MaxDB
    C  00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program                                
    B  000 000 R/3              000000000 ACTIVE       NO  NO  NO  YES NO  NO  000 255 255 20140807 202324 minisap                                                 
    C  INFO : SAP RELEASE (DB) = 702
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    M  vmcj/sgc_options: switch on template cleanup before cloning
    M  vmcj/sgc_options: switch off delayed session cleanup during shared gc
    M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30
    M  ThVmcInitMaxErrCount: th_max_error_count=5
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF            (addr: 0000000014830050, size: 4400000)
    M  SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
    M  SHM_PAGING_AREA        (addr: 0000000014C70050, size: 134217728)
    M  SHM_ROLL_ADM            (addr: 000000001CC80050, size: 2767448)
    M  SHM_PAGING_ADM        (addr: 0000000002E30050, size: 525344)
    M  ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000002F70050
    M  ThCreateNoBuffer        index size: 3000 elems
    M  ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002B00050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 14, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
    B  dbexpbuf: Buffer ESM   (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
    B  dbexpbuf: Buffer CUA   (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
    B  dbexpbuf: Buffer OTR   (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  CCMS uses Shared Memory Key 73 for monitoring.
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 00000000133FFCE0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 000000002D1500D0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 000000002D150530
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2512 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A 
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
    A  Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
    A  PXA allocated (address 000007FED3B70050, size 300000K)
    A  *** WARNING: INTERNAL_KERNEL_VERSION of message server
    A               unknown yet.
    A  abap/pxa = shared protect gen_remote
    A  PXA: checking structure sizes: 752|264|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A 
    A  ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
    A  >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
    A  >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
    A  RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
    A  RFC Options> H=BIG,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    B  dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
    B   max_blocking_factor =  10,  max_in_blocking_factor      = 127,
    B   min_blocking_factor =  10,  min_in_blocking_factor      = 127,
    B   prefer_union_all    =   1,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,                                  
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->4294967295
    M  ThrCreateShObjects        allocated 29124 bytes at 0000000002B20050
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
    N  ===...loading of Security Toolkit successfully completed.
    N  ===   SAPSECULIB Version 5.4.28M-6
    N  =================================================
    N 
    N Thu Aug 07 20:23:26 2014
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegister in process-driver OK
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 720, [7200.0.46.20020600]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [23]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: successfully obtained handle for Security Context cache
    N  VSI: WP init in ABAP VM completed with rc=0
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Enqueue Info: row condense enabled
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M 
    M Thu Aug 07 20:23:27 2014
    M  ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
    M  *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
    M  *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
    M  *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
    M 
    M  Info for wp 0
    M 
    M    pid = 6896
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    req.req_info =
    M    req.tid = -1
    M    req.uid = 4294967295
    M    req.mode = 255
    M    req.len = -1
    M    req.rq_id = 65535
    M    req.rq_source =
    M    req.vm = no VM
    M    last_tid = 0
    M    last_uid = 0
    M    last_mode = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  ThIErrHandle: current request:
    M 
    M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1
    M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -   
    M  -IN-- new_stat  NO_CHANGE         mode 255   len         -1      rq_id -1
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: hook >TrThHookFunc< o.k.
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  ThrSaveSPAFields: not an update task, no update info saved
    M  ThrSaveSPAFields: not a batch task, field zttabtckey not saved
    M  ThCallHooks: hook >ThrSaveSPAFields< o.k.
    M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: hook >ThrBtcCallLgCl< o.k.
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c   339]
    trc file: "dev_w0", trc level: 1, release: "720"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        NSP
    M systemid   562 (PC with Windows NT)
    M relno      7200
    M patchlevel 0
    M patchno    46
    M intno      20020600
    M make       multithreaded, Unicode, 64 bit, optimized
    M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
    M pid        7620
    M
    M 
    M Thu Aug 07 20:28:43 2014
    M  kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
    M  length of sys_adm_ext is 588 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c   1314]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm)        31696    (2264)
    M  DpShMCreate: sizeof(tm_adm)        5517056    (27448)
    M  DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
    M  DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
    M  DpShMCreate: sizeof(comm_adm)        584080    (1144)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
    M  DpShMCreate: sizeof(slock_adm)        156064    (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
    M  DpShMCreate: sizeof(file_adm)        268880    (80)
    M  DpShMCreate: sizeof(vmc_adm)        30128    (2152)
    M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)    48
    M  DpShMCreate: sizeof(j2ee_adm)    3936
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DE60050, size: 6812336)
    M  DpShMCreate: allocated sys_adm at 000000000DE60060
    M  DpShMCreate: allocated wp_adm_list at 000000000DE63030
    M  DpShMCreate: allocated wp_adm at 000000000DE63220
    M  DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
    M  DpShMCreate: allocated tm_adm at 000000000DE6AE50
    M  DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
    M  DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
    M  DpShMCreate: allocated comm_adm at 000000000E3CD180
    M  DpShMCreate: allocated slock_adm at 000000000E45BB20
    M  DpShMCreate: allocated file_adm at 000000000E481CD0
    M  DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
    M  DpShMCreate: allocated vmc_adm at 000000000E4C37E0
    M  DpShMCreate: allocated gw_adm at 000000000E4CADA0
    M  DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
    M  DpShMCreate: allocated ca_info at 000000000E4CBD50
    M  DpShMCreate: allocated wall_adm at 000000000E4CBD70
    M  DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
    M  DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  DpVmcSetActive: set vmc state DP_VMC_ENABLED
    M  DpVmcSetActive: set vmc state DP_VMC_ACTIVE
    M  DpVmcInit2: o.k.
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Thu Aug 07 20:28:45 2014
    M  ThInit: running on host BIG
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
    B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
    B  New connection 0 created
    C 
    C  DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.045) Unknown primary key (note 1459400)
    C    (0.039) Define your own command buffersize (note 1340617)
    C    (0.031) Dbm commands support added (note 1420733)
    C    (0.027) Count of records for bulk insert optimized (note 1340617)
    C    (0.021) Connect with special xuser key (note 1390464)
    C    (0.018) Error handling for external update statistics changed (note 1340617)
    C    (0.018) Dbsl procedure to update datasource information (note 1340617)
    C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
    C    (0.013) Possibility to disable UPSERT statements (note 1340617)
    C    (0.013) Check for external update statistics changed (note 1340617)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
    C  SQLDBC SDK     : SQLDBC.H  7.7.4    BUILD 009-123-173-450
    C  SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
    C  SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
    C  SQLDBC supports new DECIMAL interface : 1
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports VARIABLE OUTPUT data  : 1
    C  SQLDBC supports Multiple Streams      : 1
    C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1
    C  SQLDBC supports LOB LOCATOR COPY      : 1
    C  SQLDBC supports BULK SELECT with LOBS : 1
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
    C  Database release is SAP DB 7.8.01.014
    C  INFO : Database 'NSP' instance is running on 'minisap'
    C 
    C Thu Aug 07 20:28:46 2014
    C  DB supports UPSERT SQL syntax : 1
    C  DB supports new EXPAND syntax : 1
    C  DB supports LOB locators      : 1
    C  DB uses MVCC support          : 0
    C  DB max. input host variables  : 2000
    C  INFO : SAP DB Packet_Size = 131072
    C  INFO : SAP DB Min_Reply_Size = 4096
    C  INFO : SAP DB Comm_Size = 126976
    C  INFO : DBSL buffer size = 126976
    C  INFO : SAP DB MaxLocks = 300000
    C  INFO : Connect to DB as 'SAPNSP'
    C  Command info enabled
    C  Now I'm connected to MaxDB
    C  00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program                                
    B  000 000 R/3              000000000 ACTIVE       NO  NO  NO  YES NO  NO  000 255 255 20140807 202845 minisap                                                 
    C  INFO : SAP RELEASE (DB) = 702
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    M  vmcj/sgc_options: switch on template cleanup before cloning
    M  vmcj/sgc_options: switch off delayed session cleanup during shared gc
    M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30
    M  ThVmcInitMaxErrCount: th_max_error_count=5
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF            (addr: 0000000014780050, size: 4400000)
    M  SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
    M  SHM_PAGING_AREA        (addr: 0000000014BC0050, size: 134217728)
    M  SHM_ROLL_ADM            (addr: 000000001CBD0050, size: 2767448)
    M  SHM_PAGING_ADM        (addr: 00000000124B0050, size: 525344)
    M  ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000012540050
    M  ThCreateNoBuffer        index size: 3000 elems
    M  ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002EF0050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 14, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
    B  dbexpbuf: Buffer ESM   (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
    B  dbexpbuf: Buffer CUA   (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
    B  dbexpbuf: Buffer OTR   (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  CCMS uses Shared Memory Key 73 for monitoring.
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 000000001334FCE0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2512 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A 
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
    A  Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
    A  PXA allocated (address 000007FED3B70050, size 300000K)
    A  *** WARNING: INTERNAL_KERNEL_VERSION of message server
    A               unknown yet.
    A  abap/pxa = shared protect gen_remote
    A  PXA: checking structure sizes: 752|264|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A 
    A  ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
    A  >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
    A  >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
    A  RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
    A  RFC Options> H=BIG,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    B  dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
    B   max_blocking_factor =  10,  max_in_blocking_factor      = 127,
    B   min_blocking_factor =  10,  min_in_blocking_factor      = 127,
    B   prefer_union_all    =   1,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,                                  
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->4294967295
    M  ThrCreateShObjects        allocated 29124 bytes at 0000000002F20050
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
    N  ===...loading of Security Toolkit successfully completed.
    N  ===   SAPSECULIB Version 5.4.28M-6
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegister in process-driver OK
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 720, [7200.0.46.20020600]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [23]
    W    ===... Calling itsp_Init in external dll ===>
    W      PpioRecoverLocks, table: 000007FFE04EDB30
    W      PpioRecoverLocks, number of file locks 256
    W      PpioRecoverLocks: file lock set to: 0000000000000000
    W      PpioRecoverLocks: directory lock set to: 0000000000000000
    W      PpioRecoverLocks: global lock set to: 0000000000000000
    W      PpioRecoverLocks() done
    W      PprcRecoverLocks, table: 000007FFE04EE020
    W      PprcRecoverLocks: directory lock set to: 0000000000000000
    W      PprcRecoverLocks() done
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: successfully obtained handle for Security Context cache
    N  VSI: WP init in ABAP VM completed with rc=0
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Enqueue Info: row condense enabled
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M 
    M Thu Aug 07 20:28:47 2014
    M  ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
    M  *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
    M  *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
    M  *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
    M 
    M  Info for wp 0
    M 
    M    pid = 7620
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    req.req_info =
    M    req.tid = -1
    M    req.uid = 4294967295
    M    req.mode = 255
    M    req.len = -1
    M    req.rq_id = 65535
    M    req.rq_source =
    M    req.vm = no VM
    M    last_tid = 0
    M    last_uid = 0
    M    last_mode = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  ThIErrHandle: current request:
    M 
    M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1
    M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -   
    M  -IN-- new_stat  NO_CHANGE         mode 255   len         -1      rq_id -1
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: hook >TrThHookFunc< o.k.
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  ThrSaveSPAFields: not an update task, no update info saved
    M  ThrSaveSPAFields: not a batch task, field zttabtckey not saved
    M  ThCallHooks: hook >ThrSaveSPAFields< o.k.
    M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: hook >ThrBtcCallLgCl< o.k.
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c   339]
    trc file: "dev_w0", trc level: 1, release: "720"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        NSP
    M systemid   562 (PC with Windows NT)
    M relno      7200
    M patchlevel 0
    M patchno    46
    M intno      20020600
    M make       multithreaded, Unicode, 64 bit, optimized
    M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
    M pid        7828
    M
    M 
    M Thu Aug 07 20:33:43 2014
    M  kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
    M  length of sys_adm_ext is 588 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c   1314]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm)        31696    (2264)
    M  DpShMCreate: sizeof(tm_adm)        5517056    (27448)
    M  DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
    M  DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
    M  DpShMCreate: sizeof(comm_adm)        584080    (1144)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
    M  DpShMCreate: sizeof(slock_adm)        156064    (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
    M  DpShMCreate: sizeof(file_adm)        268880    (80)
    M  DpShMCreate: sizeof(vmc_adm)        30128    (2152)
    M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)    48
    M  DpShMCreate: sizeof(j2ee_adm)    3936
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
    M  DpShMCreate: allocated sys_adm at 000000000DD90060
    M  DpShMCreate: allocated wp_adm_list at 000000000DD93030
    M  DpShMCreate: allocated wp_adm at 000000000DD93220
    M  DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
    M  DpShMCreate: allocated tm_adm at 000000000DD9AE50
    M  DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
    M  DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
    M  DpShMCreate: allocated comm_adm at 000000000E2FD180
    M  DpShMCreate: allocated slock_adm at 000000000E38BB20
    M  DpShMCreate: allocated file_adm at 000000000E3B1CD0
    M  DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
    M  DpShMCreate: allocated vmc_adm at 000000000E3F37E0
    M  DpShMCreate: allocated gw_adm at 000000000E3FADA0
    M  DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
    M  DpShMCreate: allocated ca_info at 000000000E3FBD50
    M  DpShMCreate: allocated wall_adm at 000000000E3FBD70
    M  DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
    M  DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  DpVmcSetActive: set vmc state DP_VMC_ENABLED
    M  DpVmcSetActive: set vmc state DP_VMC_ACTIVE
    M  DpVmcInit2: o.k.
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Thu Aug 07 20:33:44 2014
    M  ThInit: running on host BIG
    M 
    M Thu Aug 07 20:33:45 2014
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
    B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
    B  New connection 0 created
    C 
    C  DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.045) Unknown primary key (note 1459400)
    C    (0.039) Define your own command buffersize (note 1340617)
    C    (0.031) Dbm commands support added (note 1420733)
    C    (0.027) Count of records for bulk insert optimized (note 1340617)
    C    (0.021) Connect with special xuser key (note 1390464)
    C    (0.018) Error handling for external update statistics changed (note 1340617)
    C    (0.018) Dbsl procedure to update datasource information (note 1340617)
    C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
    C    (0.013) Possibility to disable UPSERT statements (note 1340617)
    C    (0.013) Check for external update statistics changed (note 1340617)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
    C  SQLDBC SDK     : SQLDBC.H  7.7.4    BUILD 009-123-173-450
    C  SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
    C  SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
    C  SQLDBC supports new DECIMAL interface : 1
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports VARIABLE OUTPUT data  : 1
    C  SQLDBC supports Multiple Streams      : 1
    C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1
    C  SQLDBC supports LOB LOCATOR COPY      : 1
    C  SQLDBC supports BULK SELECT with LOBS : 1
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
    C  Database release is SAP DB 7.8.01.014
    C  INFO : Database 'NSP' instance is running on 'minisap'
    C  DB supports UPSERT SQL syntax : 1
    C  DB supports new EXPAND syntax : 1
    C  DB supports LOB locators      : 1
    C  DB uses MVCC support          : 0
    C  DB max. input host variables  : 2000
    C  INFO : SAP DB Packet_Size = 131072
    C  INFO : SAP DB Min_Reply_Size = 4096
    C  INFO : SAP DB Comm_Size = 126976
    C  INFO : DBSL buffer size = 126976
    C  INFO : SAP DB MaxLocks = 300000
    C  INFO : Connect to DB as 'SAPNSP'
    C  Command info enabled
    C  Now I'm connected to MaxDB
    C  00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program                                
    B  000 000 R/3              000000000 ACTIVE       NO  NO  NO  YES NO  NO  000 255 255 20140807 203345 minisap                                                 
    C  INFO : SAP RELEASE (DB) = 702
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    M  vmcj/sgc_options: switch on template cleanup before cloning
    M  vmcj/sgc_options: switch off delayed session cleanup during shared gc
    M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30
    M  ThVmcInitMaxErrCount: th_max_error_count=5
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF            (addr: 0000000014760050, size: 4400000)
    M  SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
    M  SHM_PAGING_AREA        (addr: 0000000014BA0050, size: 134217728)
    M  SHM_ROLL_ADM            (addr: 000000001CBB0050, size: 2767448)
    M  SHM_PAGING_ADM        (addr: 0000000005930050, size: 525344)
    M  ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000005A60050
    M  ThCreateNoBuffer        index size: 3000 elems
    M  ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002BC0050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 14, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
    B  dbexpbuf: Buffer ESM   (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
    B  dbexpbuf: Buffer CUA   (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
    B  dbexpbuf: Buffer OTR   (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  CCMS uses Shared Memory Key 73 for monitoring.
    M 
    M Thu Aug 07 20:33:46 2014
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 000000001322FCE0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 000000002D1900D0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 000000002D190530
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2512 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A 
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
    A  Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
    A  PXA allocated (address 000007FED3B70050, size 300000K)
    A  *** WARNING: INTERNAL_KERNEL_VERSION of message server
    A               unknown yet.
    A  abap/pxa = shared protect gen_remote
    A  PXA: checking structure sizes: 752|264|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A 
    A  ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
    A  >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
    A  >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
    A  RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
    A  RFC Options> H=BIG,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    B  dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
    B   max_blocking_factor =  10,  max_in_blocking_factor      = 127,
    B   min_blocking_factor =  10,  min_in_blocking_factor      = 127,
    B   prefer_union_all    =   1,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,                                  
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->4294967295
    M  ThrCreateShObjects        allocated 29124 bytes at 0000000002BE0050
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
    N  ===...loading of Security Toolkit successfully completed.
    N  ===   SAPSECULIB Version 5.4.28M-6
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegister in process-driver OK
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 720, [7200.0.46.20020600]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [23]
    W    ===... Calling itsp_Init in external dll ===>
    W      PpioRecoverLocks, table: 000007FFE04EDB30
    W      PpioRecoverLocks, number of file locks 256
    W      PpioRecoverLocks: file lock set to: 0000000000000000
    W      PpioRecoverLocks: directory lock set to: 0000000000000000
    W      PpioRecoverLocks: global lock set to: 0000000000000000
    W      PpioRecoverLocks() done
    W      PprcRecoverLocks, table: 000007FFE04EE020
    W      PprcRecoverLocks: directory lock set to: 0000000000000000
    W      PprcRecoverLocks() done
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: successfully obtained handle for Security Context cache
    N  VSI: WP init in ABAP VM completed with rc=0
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Enqueue Info: row condense enabled
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M 
    M Thu Aug 07 20:33:47 2014
    M  ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
    M  *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
    M  *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
    M  *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
    M 
    M  Info for wp 0
    M 
    M    pid = 7828
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    req.req_info =
    M    req.tid = -1
    M    req.uid = 4294967295
    M    req.mode = 255
    M    req.len = -1
    M    req.rq_id = 65535
    M    req.rq_source =
    M    req.vm = no VM
    M    last_tid = 0
    M    last_uid = 0
    M    last_mode = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  ThIErrHandle: current request:
    M 
    M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1
    M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -   
    M  -IN-- new_stat  NO_CHANGE         mode 255   len         -1      rq_id -1
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: hook >TrThHookFunc< o.k.
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  ThrSaveSPAFields: not an update task, no update info saved
    M  ThrSaveSPAFields: not a batch task, field zttabtckey not saved
    M  ThCallHooks: hook >ThrSaveSPAFields< o.k.
    M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: hook >ThrBtcCallLgCl< o.k.
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c   339]
    // END OF FILE
    i hope that we can bring my sap to runing?
    best regards
    mirso

  • Installation problem: Central Instance 6.40 Oracle on Linux 32

    Hi everybody, I ran into some basic problems with an installation on Redhat EL4 with SUN SDK 1.4.2_12
    here is where sapinst stops after selecting the java dvd:
    somehow the getting the right Java home seems to be the problem, although environment variables are set...
    SAPinst component stack:
    ========================
      Preinstall|ind|ind|ind|ind|ind|0
    Current script:
    ===============
    if (!context.getBool("ci") && !context.getBool("di") && !installer.onWindows()) {
      // we are running on Unix. We need JAVA_HOME for the user creation only.
      WebAS.restore(context.get("WebASDump"));
      var webas = new WebAS({sid:context.get("SID"), j2eeStandalone:context.getBool("standalone")});
      if (webas.getAccountData(WebAS.SIDAdm).exists) {
        return;
    if (context.get("JAVA_HOME") == "") {
      if (installer.onOS400()) {
        installer.getCD("J2EE");
        context.set( "JAVA_HOME", os400_getJavaHome() );
      } else {
        var versions = Java.readVersionFile(installer.getCD("J2EE"));
        context.set("JAVA_HOME", Java.getBestHome(versions.minVersion, versions.maxVersion));
    here the sapinst_dev.log:
    TRACE      [sapinst.cpp:285]
               CSapInst::initMessaging()
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:344]
               CControlFile::getMessageFilePath()
    Running with messages from /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
    TRACE      [sapinst.cpp:306]
               CSapInst::initMessaging()
    This is SAPinst, version 642, build 703609
    compiled on Nov 21 2004, 20:12:45
    TRACE      [sapinst.cpp:311]
               CSapInst::initMessaging()
    Gui connected by user root from host localhost
    TRACE      [syuxcgroup.cpp:528]
               bool CSyUserImpl::isExistingOnOS()
    checking existence of account group="root" gid="0" succeeded with true.
    TRACE      [syxxccache.cpp:208]
               CSyAccountCache::getGroupImpl(name="", sid="0", create=false, ISyProgressObserver* )
    inserted account (root, 0, GROUP) into the accountcache.
    TRACE      [syxxsyshlp.cpp:133]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
      SSH_AGENT_PID = 3137
      HOSTNAME = localhost
      TERM = xterm
      SHELL = /bin/bash
      DESKTOP_STARTUP_ID =
      HISTSIZE = 1000
      GTK_RC_FILES = /etc/gtk/gtkrc:/root/.gtkrc-1.2-gnome2
      WINDOWID = 35655351
      SAPINST_EXEDIR_CD = .
      QTDIR = /usr/lib/qt-3.3
      USER = root
      JRE_HOME = /usr/java/j2sdk1.4.2_12/jre
      LD_LIBRARY_PATH = /tmp/sapinst_exe.3669.1153729381
      LS_COLORS = no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
      SSH_AUTH_SOCK = /tmp/ssh-WtPWyH3136/agent.3136
      GNOME_KEYRING_SOCKET = /tmp/keyring-MMmk9C/socket
      KDEDIR = /usr
      SESSION_MANAGER = local/localhost:/tmp/.ICE-unix/3109
      PATH = /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_12/bin:/root/bin
      DESKTOP_SESSION = default
      MAIL = /var/spool/mail/root
      JAVA_BINDIR = /usr/java/j2sdk1.4.2_12/bin
      PWD = /root/backupmnt/temp/SAPWAS640LinuxOracle/32bitInstall/DVD_NW_04_SR1_Installation_Master/IM09_LINUX_32/SAPINST/UNIX/LINUX_32
      INPUTRC = /etc/inputrc
      JAVA_HOME = /usr/java/j2sdk1.4.2_12
      LANG = en_US.UTF-8
      SAPINST_EXE_DIR = /tmp/sapinst_exe.3669.1153729381
      JAVA_VERSION = 1.4.2_12
      GDMSESSION = default
      SSH_ASKPASS = /usr/libexec/openssh/gnome-ssh-askpass
      SHLVL = 2
      HOME = /root
      JDK_HOME = /usr/java/j2sdk1.4.2_12
      GNOME_DESKTOP_SESSION_ID = Default
      LOGNAME = root
      DBUS_SESSION_BUS_ADDRESS = unix:abstract=/tmp/dbus-KeIbVNuZM7
      LESSOPEN = |/usr/bin/lesspipe.sh %s
      DISPLAY = :0.0
      G_BROKEN_FILENAMES = 1
      XAUTHORITY = /root/.Xauthority
      COLORTERM = gnome-terminal
    User: root, Id: 0
    Effective user: root, Id: 0
    Group: root, Id: 0
    Effective group: root, Id: 0
    Umask: 022
    Resource Limits
    ===============
    RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited
    RLIMIT_FSIZE: maximum size of  a  file  in  bytes  that  may  be created  by  a process current: unlimited maximum: unlimited
    RLIMIT_DATA: maximum size of a process's heap  in  bytes current: unlimited maximum: unlimited
    RLIMIT_STACK: maximum size of a process's stack  in  bytes current: 10485760 maximum: unlimited
    RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited
    RLIMIT_MEMLOCK: Locked-in-memory addess space. current: 32768 maximum: 32768
    RLIMIT_NOFILE: one more than the maximum value that  the  system  may assign  to a newly created descriptor current: 1024 maximum: 1024
    RLIMIT_OFILE: one more than the maximum value that  the  system  may assign  to a newly created descriptor current: 1024 maximum: 1024
    RLIMIT_NPROC: maximum number of child processes per real user ID current: 13184 maximum: 13184
    RLIMIT_RSS: maximum resident set size in bytes current: unlimited maximum: unlimited
    RLIMIT_AS: maximum size of a process's  total  available memory, in bytes current: unlimited maximum: unlimited
    Working directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
    TRACE      [syuxctask.cpp:1242]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 3705
    TRACE      [syxxsyshlp.cpp:143]
               syslib::logSystemState()
    System information
    ==================
    uname: Linux localhost 2.6.9-11.EL #1 Fri May 20 18:17:57 EDT 2005 i686 i686 i386 GNU/Linux
    RAM size (MB): 813.152
    Swap size (MB): 258.852
    Kernel Parameters:
    ==================
    dev.cdrom.autoclose = 1
    dev.cdrom.autoeject = 0
    dev.cdrom.check_media = 0
    dev.cdrom.debug = 0
    dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.20 2003/12/17
    dev.cdrom.lock = 1
    dev.parport.default.spintime = 500
    dev.parport.default.timeslice = 200
    dev.parport.parport0.autoprobe =
    dev.parport.parport0.autoprobe0 =
    dev.parport.parport0.autoprobe1 =
    dev.parport.parport0.autoprobe2 =
    dev.parport.parport0.autoprobe3 =
    dev.parport.parport0.base-addr = 888     1912
    dev.parport.parport0.devices.active = none
    dev.parport.parport0.devices.lp.timeslice = 200
    dev.parport.parport0.dma = -1
    dev.parport.parport0.irq = -1
    dev.parport.parport0.modes = PCSPP,TRISTATE
    dev.parport.parport0.spintime = 500
    dev.raid.speed_limit_max = 200000
    dev.raid.speed_limit_min = 1000
    dev.rtc.max-user-freq = 64
    dev.scsi.logging_level = 0
    fs.aio-max-nr = 65536
    fs.aio-nr = 0
    fs.binfmt_misc.register =
    fs.binfmt_misc.status = enabled
    fs.dentry-state = 22755     20214     45     0     0     0
    fs.dir-notify-enable = 1
    fs.file-max = 82562
    fs.file-nr = 2480     0     82562
    fs.inode-nr = 17270     1015
    fs.inode-state = 17270     1015     0     0     0     0     0
    fs.lease-break-time = 45
    fs.leases-enable = 1
    fs.mqueue.msg_max = 10
    fs.mqueue.msgsize_max = 8192
    fs.mqueue.queues_max = 256
    fs.overflowgid = 65534
    fs.overflowuid = 65534
    fs.quota.allocated_dquots = 0
    fs.quota.cache_hits = 0
    fs.quota.drops = 0
    fs.quota.free_dquots = 0
    fs.quota.lookups = 0
    fs.quota.reads = 0
    fs.quota.syncs = 20
    fs.quota.writes = 0
    kernel.acct = 4     2     30
    kernel.cad_pid = 1
    kernel.cap-bound = -257
    kernel.core_pattern = core
    kernel.core_uses_pid = 1
    kernel.ctrl-alt-del = 0
    kernel.domainname = (none)
    kernel.exec-shield = 1
    kernel.exec-shield-randomize = 1
    kernel.hostname = localhost
    kernel.hotplug = /sbin/hotplug
    kernel.modprobe = /sbin/modprobe
    kernel.msgmax = 8192
    kernel.msgmnb = 16384
    kernel.msgmni = 16
    kernel.ngroups_max = 65536
    kernel.osrelease = 2.6.9-11.EL
    kernel.ostype = Linux
    kernel.overflowgid = 65534
    kernel.overflowuid = 65534
    kernel.panic = 0
    kernel.panic_on_oops = 1
    kernel.pid_max = 32768
    kernel.print-fatal-signals = 0
    kernel.printk = 6     4     1     7
    kernel.printk_ratelimit = 5
    kernel.printk_ratelimit_burst = 10
    kernel.pty.max = 4096
    kernel.pty.nr = 3
    kernel.random.boot_id = 906671fa-2e46-4253-b860-368e36266a3a
    kernel.random.entropy_avail = 3968
    kernel.random.poolsize = 512
    kernel.random.read_wakeup_threshold = 64
    kernel.random.uuid = 32d988a2-1496-4f14-93ac-ff43f88ff37d
    kernel.random.write_wakeup_threshold = 128
    kernel.real-root-dev = 0
    kernel.sem = 250     32000     32     128
    kernel.shmall = 2097152
    kernel.shmmax = 33554432
    kernel.shmmni = 4096
    kernel.suid_dumpable = 0
    kernel.sysrq = 0
    kernel.tainted = 1
    kernel.threads-max = 26368
    kernel.vdso = 0
    kernel.version = #1 Fri May 20 18:17:57 EDT 2005
    net.core.dev_weight = 64
    net.core.divert_version = 0.46
    net.core.lo_cong = 100
    net.core.message_burst = 10
    net.core.message_cost = 5
    net.core.mod_cong = 290
    net.core.netdev_max_backlog = 300
    net.core.no_cong = 20
    net.core.no_cong_thresh = 10
    net.core.optmem_max = 10240
    net.core.rmem_default = 110592
    net.core.rmem_max = 131071
    net.core.somaxconn = 128
    net.core.wmem_default = 110592
    net.core.wmem_max = 131071
    net.ipv4.conf.all.accept_redirects = 1
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.all.arp_announce = 0
    net.ipv4.conf.all.arp_filter = 0
    net.ipv4.conf.all.arp_ignore = 0
    net.ipv4.conf.all.bootp_relay = 0
    net.ipv4.conf.all.disable_policy = 0
    net.ipv4.conf.all.disable_xfrm = 0
    net.ipv4.conf.all.force_igmp_version = 0
    net.ipv4.conf.all.forwarding = 0
    net.ipv4.conf.all.log_martians = 0
    net.ipv4.conf.all.mc_forwarding = 0
    net.ipv4.conf.all.medium_id = 0
    net.ipv4.conf.all.proxy_arp = 0
    net.ipv4.conf.all.rp_filter = 0
    net.ipv4.conf.all.secure_redirects = 1
    net.ipv4.conf.all.send_redirects = 1
    net.ipv4.conf.all.shared_media = 1
    net.ipv4.conf.all.tag = 0
    net.ipv4.conf.default.accept_redirects = 1
    net.ipv4.conf.default.accept_source_route = 0
    net.ipv4.conf.default.arp_announce = 0
    net.ipv4.conf.default.arp_filter = 0
    net.ipv4.conf.default.arp_ignore = 0
    net.ipv4.conf.default.bootp_relay = 0
    net.ipv4.conf.default.disable_policy = 0
    net.ipv4.conf.default.disable_xfrm = 0
    net.ipv4.conf.default.force_igmp_version = 0
    net.ipv4.conf.default.forwarding = 0
    net.ipv4.conf.default.log_martians = 0
    net.ipv4.conf.default.mc_forwarding = 0
    net.ipv4.conf.default.medium_id = 0
    net.ipv4.conf.default.proxy_arp = 0
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.default.secure_redirects = 1
    net.ipv4.conf.default.send_redirects = 1
    net.ipv4.conf.default.shared_media = 1
    net.ipv4.conf.default.tag = 0
    net.ipv4.conf.eth0.accept_redirects = 1
    net.ipv4.conf.eth0.accept_source_route = 0
    net.ipv4.conf.eth0.arp_announce = 0
    net.ipv4.conf.eth0.arp_filter = 0
    net.ipv4.conf.eth0.arp_ignore = 0
    net.ipv4.conf.eth0.bootp_relay = 0
    net.ipv4.conf.eth0.disable_policy = 0
    net.ipv4.conf.eth0.disable_xfrm = 0
    net.ipv4.conf.eth0.force_igmp_version = 0
    net.ipv4.conf.eth0.forwarding = 0
    net.ipv4.conf.eth0.log_martians = 0
    net.ipv4.conf.eth0.mc_forwarding = 0
    net.ipv4.conf.eth0.medium_id = 0
    net.ipv4.conf.eth0.proxy_arp = 0
    net.ipv4.conf.eth0.rp_filter = 1
    net.ipv4.conf.eth0.secure_redirects = 1
    net.ipv4.conf.eth0.send_redirects = 1
    net.ipv4.conf.eth0.shared_media = 1
    net.ipv4.conf.eth0.tag = 0
    net.ipv4.conf.lo.accept_redirects = 1
    net.ipv4.conf.lo.accept_source_route = 1
    net.ipv4.conf.lo.arp_announce = 0
    net.ipv4.conf.lo.arp_filter = 0
    net.ipv4.conf.lo.arp_ignore = 0
    net.ipv4.conf.lo.bootp_relay = 0
    net.ipv4.conf.lo.disable_policy = 1
    net.ipv4.conf.lo.disable_xfrm = 1
    net.ipv4.conf.lo.force_igmp_version = 0
    net.ipv4.conf.lo.forwarding = 0
    net.ipv4.conf.lo.log_martians = 0
    net.ipv4.conf.lo.mc_forwarding = 0
    net.ipv4.conf.lo.medium_id = 0
    net.ipv4.conf.lo.proxy_arp = 0
    net.ipv4.conf.lo.rp_filter = 0
    net.ipv4.conf.lo.secure_redirects = 1
    net.ipv4.conf.lo.send_redirects = 1
    net.ipv4.conf.lo.shared_media = 1
    net.ipv4.conf.lo.tag = 0
    net.ipv4.icmp_echo_ignore_all = 0
    net.ipv4.icmp_echo_ignore_broadcasts = 0
    net.ipv4.icmp_ignore_bogus_error_responses = 0
    net.ipv4.icmp_ratelimit = 1000
    net.ipv4.icmp_ratemask = 6168
    net.ipv4.igmp_max_memberships = 20
    net.ipv4.igmp_max_msf = 10
    net.ipv4.inet_peer_gc_maxtime = 120
    net.ipv4.inet_peer_gc_mintime = 10
    net.ipv4.inet_peer_maxttl = 600
    net.ipv4.inet_peer_minttl = 120
    net.ipv4.inet_peer_threshold = 65664
    net.ipv4.ip_autoconfig = 0
    net.ipv4.ip_default_ttl = 64
    net.ipv4.ip_dynaddr = 0
    net.ipv4.ip_forward = 0
    net.ipv4.ip_local_port_range = 32768     61000
    net.ipv4.ip_no_pmtu_disc = 0
    net.ipv4.ip_nonlocal_bind = 0
    net.ipv4.ipfrag_high_thresh = 262144
    net.ipv4.ipfrag_low_thresh = 196608
    net.ipv4.ipfrag_secret_interval = 600
    net.ipv4.ipfrag_time = 30
    net.ipv4.neigh.default.anycast_delay = 99
    net.ipv4.neigh.default.app_solicit = 0
    net.ipv4.neigh.default.base_reachable_time = 30
    net.ipv4.neigh.default.delay_first_probe_time = 5
    net.ipv4.neigh.default.gc_interval = 30
    net.ipv4.neigh.default.gc_stale_time = 60
    net.ipv4.neigh.default.gc_thresh1 = 128
    net.ipv4.neigh.default.gc_thresh2 = 512
    net.ipv4.neigh.default.gc_thresh3 = 1024
    net.ipv4.neigh.default.locktime = 99
    net.ipv4.neigh.default.mcast_solicit = 3
    net.ipv4.neigh.default.proxy_delay = 79
    net.ipv4.neigh.default.proxy_qlen = 64
    net.ipv4.neigh.default.retrans_time = 99
    net.ipv4.neigh.default.ucast_solicit = 3
    net.ipv4.neigh.default.unres_qlen = 3
    net.ipv4.neigh.eth0.anycast_delay = 99
    net.ipv4.neigh.eth0.app_solicit = 0
    net.ipv4.neigh.eth0.base_reachable_time = 30
    net.ipv4.neigh.eth0.delay_first_probe_time = 5
    net.ipv4.neigh.eth0.gc_stale_time = 60
    net.ipv4.neigh.eth0.locktime = 99
    net.ipv4.neigh.eth0.mcast_solicit = 3
    net.ipv4.neigh.eth0.proxy_delay = 79
    net.ipv4.neigh.eth0.proxy_qlen = 64
    net.ipv4.neigh.eth0.retrans_time = 99
    net.ipv4.neigh.eth0.ucast_solicit = 3
    net.ipv4.neigh.eth0.unres_qlen = 3
    net.ipv4.neigh.lo.anycast_delay = 99
    net.ipv4.neigh.lo.app_solicit = 0
    net.ipv4.neigh.lo.base_reachable_time = 30
    net.ipv4.neigh.lo.delay_first_probe_time = 5
    net.ipv4.neigh.lo.gc_stale_time = 60
    net.ipv4.neigh.lo.locktime = 99
    net.ipv4.neigh.lo.mcast_solicit = 3
    net.ipv4.neigh.lo.proxy_delay = 79
    net.ipv4.neigh.lo.proxy_qlen = 64
    net.ipv4.neigh.lo.retrans_time = 99
    net.ipv4.neigh.lo.ucast_solicit = 3
    net.ipv4.neigh.lo.unres_qlen = 3
    net.ipv4.route.error_burst = 5000
    net.ipv4.route.error_cost = 1000
    net.ipv4.route.flush =
    net.ipv4.route.gc_elasticity = 8
    net.ipv4.route.gc_interval = 60
    net.ipv4.route.gc_min_interval = 0
    net.ipv4.route.gc_thresh = 2048
    net.ipv4.route.gc_timeout = 300
    net.ipv4.route.max_delay = 10
    net.ipv4.route.max_size = 32768
    net.ipv4.route.min_adv_mss = 256
    net.ipv4.route.min_delay = 2
    net.ipv4.route.min_pmtu = 552
    net.ipv4.route.mtu_expires = 600
    net.ipv4.route.redirect_load = 20
    net.ipv4.route.redirect_number = 9
    net.ipv4.route.redirect_silence = 20480
    net.ipv4.route.secret_interval = 600
    net.ipv4.tcp_abort_on_overflow = 0
    net.ipv4.tcp_adv_win_scale = 2
    net.ipv4.tcp_app_win = 31
    net.ipv4.tcp_bic = 1
    net.ipv4.tcp_bic_beta = 819
    net.ipv4.tcp_bic_fast_convergence = 1
    net.ipv4.tcp_bic_low_window = 14
    net.ipv4.tcp_dsack = 1
    net.ipv4.tcp_ecn = 0
    net.ipv4.tcp_fack = 1
    net.ipv4.tcp_fin_timeout = 60
    net.ipv4.tcp_frto = 0
    net.ipv4.tcp_keepalive_intvl = 75
    net.ipv4.tcp_keepalive_probes = 9
    net.ipv4.tcp_keepalive_time = 7200
    net.ipv4.tcp_low_latency = 0
    net.ipv4.tcp_max_orphans = 65536
    net.ipv4.tcp_max_syn_backlog = 1024
    net.ipv4.tcp_max_tw_buckets = 180000
    net.ipv4.tcp_mem = 196608     262144     393216
    net.ipv4.tcp_moderate_rcvbuf = 1
    net.ipv4.tcp_no_metrics_save = 0
    net.ipv4.tcp_orphan_retries = 0
    net.ipv4.tcp_reordering = 3
    net.ipv4.tcp_retrans_collapse = 1
    net.ipv4.tcp_retries1 = 3
    net.ipv4.tcp_retries2 = 15
    net.ipv4.tcp_rfc1337 = 0
    net.ipv4.tcp_rmem = 4096     87380     174760
    net.ipv4.tcp_sack = 1
    net.ipv4.tcp_stdurg = 0
    net.ipv4.tcp_syn_retries = 5
    net.ipv4.tcp_synack_retries = 5
    net.ipv4.tcp_syncookies = 0
    net.ipv4.tcp_timestamps = 1
    net.ipv4.tcp_tso_win_divisor = 8
    net.ipv4.tcp_tw_recycle = 0
    net.ipv4.tcp_tw_reuse = 0
    net.ipv4.tcp_vegas_alpha = 2
    net.ipv4.tcp_vegas_beta = 6
    net.ipv4.tcp_vegas_cong_avoid = 0
    net.ipv4.tcp_vegas_gamma = 2
    net.ipv4.tcp_westwood = 0
    net.ipv4.tcp_window_scaling = 1
    net.ipv4.tcp_wmem = 4096     16384     131072
    net.ipv6.bindv6only = 0
    net.ipv6.conf.all.accept_ra = 1
    net.ipv6.conf.all.accept_redirects = 1
    net.ipv6.conf.all.autoconf = 1
    net.ipv6.conf.all.dad_transmits = 1
    net.ipv6.conf.all.force_mld_version = 0
    net.ipv6.conf.all.forwarding = 0
    net.ipv6.conf.all.hop_limit = 64
    net.ipv6.conf.all.max_addresses = 16
    net.ipv6.conf.all.max_desync_factor = 600
    net.ipv6.conf.all.mtu = 1280
    net.ipv6.conf.all.regen_max_retry = 5
    net.ipv6.conf.all.router_solicitation_delay = 1
    net.ipv6.conf.all.router_solicitation_interval = 4
    net.ipv6.conf.all.router_solicitations = 3
    net.ipv6.conf.all.temp_prefered_lft = 86400
    net.ipv6.conf.all.temp_valid_lft = 604800
    net.ipv6.conf.all.use_tempaddr = 0
    net.ipv6.conf.default.accept_ra = 1
    net.ipv6.conf.default.accept_redirects = 1
    net.ipv6.conf.default.autoconf = 1
    net.ipv6.conf.default.dad_transmits = 1
    net.ipv6.conf.default.force_mld_version = 0
    net.ipv6.conf.default.forwarding = 0
    net.ipv6.conf.default.hop_limit = 64
    net.ipv6.conf.default.max_addresses = 16
    net.ipv6.conf.default.max_desync_factor = 600
    net.ipv6.conf.default.mtu = 1280
    net.ipv6.conf.default.regen_max_retry = 5
    net.ipv6.conf.default.router_solicitation_delay = 1
    net.ipv6.conf.default.router_solicitation_interval = 4
    net.ipv6.conf.default.router_solicitations = 3
    net.ipv6.conf.default.temp_prefered_lft = 86400
    net.ipv6.conf.default.temp_valid_lft = 604800
    net.ipv6.conf.default.use_tempaddr = 0
    net.ipv6.conf.eth0.accept_ra = 1
    net.ipv6.conf.eth0.accept_redirects = 1
    net.ipv6.conf.eth0.autoconf = 1
    net.ipv6.conf.eth0.dad_transmits = 1
    net.ipv6.conf.eth0.force_mld_version = 0
    net.ipv6.conf.eth0.forwarding = 0
    net.ipv6.conf.eth0.hop_limit = 64
    net.ipv6.conf.eth0.max_addresses = 16
    net.ipv6.conf.eth0.max_desync_factor = 600
    net.ipv6.conf.eth0.mtu = 1500
    net.ipv6.conf.eth0.regen_max_retry = 5
    net.ipv6.conf.eth0.router_solicitation_delay = 1
    net.ipv6.conf.eth0.router_solicitation_interval = 4
    net.ipv6.conf.eth0.router_solicitations = 3
    net.ipv6.conf.eth0.temp_prefered_lft = 86400
    net.ipv6.conf.eth0.temp_valid_lft = 604800
    net.ipv6.conf.eth0.use_tempaddr = 0
    net.ipv6.conf.lo.accept_ra = 1
    net.ipv6.conf.lo.accept_redirects = 1
    net.ipv6.conf.lo.autoconf = 1
    net.ipv6.conf.lo.dad_transmits = 1
    net.ipv6.conf.lo.force_mld_version = 0
    net.ipv6.conf.lo.forwarding = 0
    net.ipv6.conf.lo.hop_limit = 64
    net.ipv6.conf.lo.max_addresses = 16
    net.ipv6.conf.lo.max_desync_factor = 600
    net.ipv6.conf.lo.mtu = 16436
    net.ipv6.conf.lo.regen_max_retry = 5
    net.ipv6.conf.lo.router_solicitation_delay = 1
    net.ipv6.conf.lo.router_solicitation_interval = 4
    net.ipv6.conf.lo.router_solicitations = 3
    net.ipv6.conf.lo.temp_prefered_lft = 86400
    net.ipv6.conf.lo.temp_valid_lft = 604800
    net.ipv6.conf.lo.use_tempaddr = -1
    net.ipv6.icmp.ratelimit = 1000
    net.ipv6.ip6frag_high_thresh = 262144
    net.ipv6.ip6frag_low_thresh = 196608
    net.ipv6.ip6frag_secret_interval = 600
    net.ipv6.ip6frag_time = 60
    net.ipv6.mld_max_msf = 10
    net.ipv6.neigh.default.anycast_delay = 99
    net.ipv6.neigh.default.app_solicit = 0
    net.ipv6.neigh.default.base_reachable_time = 30
    net.ipv6.neigh.default.delay_first_probe_time = 5
    net.ipv6.neigh.default.gc_interval = 30
    net.ipv6.neigh.default.gc_stale_time = 60
    net.ipv6.neigh.default.gc_thresh1 = 128
    net.ipv6.neigh.default.gc_thresh2 = 512
    net.ipv6.neigh.default.gc_thresh3 = 1024
    net.ipv6.neigh.default.locktime = 0
    net.ipv6.neigh.default.mcast_solicit = 3
    net.ipv6.neigh.default.proxy_delay = 79
    net.ipv6.neigh.default.proxy_qlen = 64
    net.ipv6.neigh.default.retrans_time = 1000
    net.ipv6.neigh.default.ucast_solicit = 3
    net.ipv6.neigh.default.unres_qlen = 3
    net.ipv6.neigh.eth0.anycast_delay = 99
    net.ipv6.neigh.eth0.app_solicit = 0
    net.ipv6.neigh.eth0.base_reachable_time = 30
    net.ipv6.neigh.eth0.delay_first_probe_time = 5
    net.ipv6.neigh.eth0.gc_stale_time = 60
    net.ipv6.neigh.eth0.locktime = 0
    net.ipv6.neigh.eth0.mcast_solicit = 3
    net.ipv6.neigh.eth0.proxy_delay = 79
    net.ipv6.neigh.eth0.proxy_qlen = 64
    net.ipv6.neigh.eth0.retrans_time = 1000
    net.ipv6.neigh.eth0.ucast_solicit = 3
    net.ipv6.neigh.eth0.unres_qlen = 3
    net.ipv6.neigh.lo.anycast_delay = 99
    net.ipv6.neigh.lo.app_solicit = 0
    net.ipv6.neigh.lo.base_reachable_time = 30
    net.ipv6.neigh.lo.delay_first_probe_time = 5
    net.ipv6.neigh.lo.gc_stale_time = 60
    net.ipv6.neigh.lo.locktime = 0
    net.ipv6.neigh.lo.mcast_solicit = 3
    net.ipv6.neigh.lo.proxy_delay = 79
    net.ipv6.neigh.lo.proxy_qlen = 64
    net.ipv6.neigh.lo.retrans_time = 1000
    net.ipv6.neigh.lo.ucast_solicit = 3
    net.ipv6.neigh.lo.unres_qlen = 3
    net.ipv6.route.flush =
    net.ipv6.route.gc_elasticity = 0
    net.ipv6.route.gc_interval = 30
    net.ipv6.route.gc_min_interval = 0
    net.ipv6.route.gc_thresh = 1024
    net.ipv6.route.gc_timeout = 60
    net.ipv6.route.max_size = 4096
    net.ipv6.route.min_adv_mss = 1
    net.ipv6.route.mtu_expires = 600
    net.token-ring.rif_timeout = 600000
    net.unix.max_dgram_qlen = 10
    sunrpc.nfs_debug = 0
    sunrpc.nfsd_debug = 0
    sunrpc.nlm_debug = 0
    sunrpc.rpc_debug = 0
    sunrpc.tcp_slot_table_entries = 16
    sunrpc.udp_slot_table_entries = 16
    vm.block_dump = 0
    vm.dirty_background_ratio = 10
    vm.dirty_expire_centisecs = 3000
    vm.dirty_ratio = 40
    vm.dirty_writeback_centisecs = 500
    vm.hugetlb_shm_group = 0
    vm.laptop_mode = 0
    vm.legacy_va_layout = 0
    vm.lower_zone_protection = 0
    vm.max_map_count = 65536
    vm.min_free_kbytes = 918
    vm.nr_hugepages = 0
    vm.nr_pdflush_threads = 2
    vm.overcommit_memory = 0
    vm.overcommit_ratio = 50
    vm.page-cluster = 3
    vm.swappiness = 60
    vm.vfs_cache_pressure = 100
    TRACE     
    Running with control file control.xml version 642 and changelist 703273
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:142]
               CControlFile::getKeydbControlFileName()
    Running with keydb file keydb.xml
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:235]
               CControlFile::getDialogControlFileName()
    Running with dialog control file dialog.xml
    TRACE      [iaxxccontrolfile.cpp:184]
               CControlFile::getResourecFileName()
    Running with resource file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/helppool.xml
    INFO       2006-07-24 10:23:29 [syxxcfile.cpp:446]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO       2006-07-24 10:23:29 [syuxcpath.cpp:369]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/q0w9e9r8t7.1.xml.
    INFO       2006-07-24 10:23:30 [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iaccdlib.so
    INFO       2006-07-24 10:23:30 [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem
    INFO       2006-07-24 10:23:30 [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodos.so
    INFO       2006-07-24 10:23:30 [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step checkRuntimeSystem with key Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|SetDefaults
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step SetDefaults with key Preinstall|ind|ind|ind|ind|ind|0|SetDefaults has been executed successfully.
    INFO       2006-07-24 10:23:31 [syxxcfile.cpp:446]
               CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
    INFO       2006-07-24 10:23:31 [syuxcpath.cpp:369]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diSummarize
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step diSummarize with key Preinstall|ind|ind|ind|ind|ind|0|diSummarize has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diProgress
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step diProgress with key Preinstall|ind|ind|ind|ind|ind|0|diProgress has been executed successfully.
    INFO       2006-07-24 10:23:32 [syuxcpath.cpp:369]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/summary.html.
    PHASE      2006-07-24 10:23:32 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Prepare the installation program.
    INFO       2006-07-24 10:23:48 [iaxxcwalker.cpp:59]
               CDomWalker::walk()
    Installation start: Monday, 24 July 2006, 10:23:26; installation directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System
    TRACE<i>   [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodora.so
    TRACE<i>   [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxccntrl.cpp:398]
               CController::activateEvaluator()
    The controller registered the module COraInputChecker
    TRACE<i>   [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodada.so
    TRACE<i>   [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxccntrl.cpp:398]
               CController::activateEvaluator()
    The controller registered the module CIaSdbActor
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext
    INFO       2006-07-24 10:23:48 [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iajsmod.so
    INFO       2006-07-24 10:23:48 [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    t_J2EE_Dialogs.remove(WHERE 1=1)
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    t_J2EE_Dialogs.insertRow({
      di:false
      oneHost:true
    }), inserting
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step fillContext with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    Reading additional shipment information from product.xml...
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    tProductInfo.updateRow({
      Name:WebAs
      Version:640
    }, WHERE ROWNUM=0), updating
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    IA_CONTR_DBPLATFORM.updateRow({
      DBPLATFORM:ORA
    }, WHERE ROWNUM=0), updating
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    Table: tWhat
      Name:What
      Value:INST
      Name:InstanceType
      Value:DI
      Name:DbType
      Value:NEWDB
      Name:DataType
      Value:SAP
      Name:MigType
      Value:STD
      Name:INQMY
      Value:NO
      Name:IsCluster
      Value:NO
      Name:IsClusterA
      Value:NO
      Name:IsClusterB
      Value:NO
      Name:UNICODE
      Value:YES
      Name:Db6Engine
      Value:EE
      Name:IGS
      Value:YES
      Name:CCM4X
      Value:NO
      Name:HETFS
      Value:false
      Name:LCCLIENT
      Value:false
      Name:J2EE630
      Value:false
      Name:DB2Connectivity
      Value:DRDA
      Name:SDM_JDBCDRIVER_DB4
      Value:engine
      Name:LCUSERDATAADMIN
      Value:false
      Name:SeparateSCS
      Value:false
      Name:EEENodeNumber
      Value:EEENode0
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step readProductXml with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    t_systems.remove(WHERE 1=1)
    INFO       2006-07-24 10:23:49
               CJSlibModule::writeInfo_impl()
    Looking for SAP system instances installed on this host...
    INFO       2006-07-24 10:23:49
               CJSlibModule::writeInfo_impl()
    No installed instances found!
    TRACE      [syxxcnamrs.cpp:278]
               PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const
    IP name localhost resolves to IP address(es): 127.0.0.1
    TRACE      [syxxcnamrs.cpp:208]
               PSyHostsEntry CSyIPNameResolverImpl::getHostByAddress(const iastring& ipAddress) const
    IP address 127.0.0.1 resolves to IP name(s): localhost
    TRACE      [iaxxbhosts.cpp:674]
               CIaOsHosts::resolveHostName()
    hostname after reverse lookup is: localhost
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    shells.updateRow({
      shell:/bin/bash
    }, WHERE shell='/bin/bash'), inserting
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step setDefaults with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck
    INFO       2006-07-24 10:23:50
               CJSlibModule::writeInfo_impl()
    DNS is configured correctly.
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step DNSCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step MemoryCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step virtualHostCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat
    INFO       2006-07-24 10:23:51 [iaxxclib.cpp:83]
               load()
    Working directory changed to /tmp/sapinst_exe.3669.1153729381.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodutl.so
    INFO       2006-07-24 10:23:51 [iaxxclib.cpp:108]
               load()
    Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step askWhat with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep
    TRACE      [iaxxgenimp.cpp:189]
               showDialog()
    showing dlg d_webas630_prepare_ci_unix
    TRACE      [iaxxgenimp.cpp:205]
               showDialog()
    <dialog sid="d_webas630_prepare_ci_unix">
    <dialog/>
    TRACE      [iaxxgenimp.cpp:845]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxdlghnd.cpp:98]
               CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    profile directory '/sapmnt/J2E/profile' does not exist. Returning undefined.
    TRACE      [iaxxgenimp.cpp:212]
               showDialog()
    <dialog sid="d_webas630_prepare_ci_unix">
    <dialog/>
    TRACE      [iaxxccntrl.cpp:493]
               CController::stepExecuted()
    The step askPrep with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep has been executed successfully.
    TRACE      [iaxxcdgprc.cpp:635]
               CDialogProcessor::processDialogs()
    Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome
    TRACE      [iaxxgenimp.cpp:189]
               showDialog()
    showing dlg diCdServerMissingPackageWithCdName
    TRACE      [iaxxgenimp.cpp:205]
               showDialog()
    <dialog sid="diCdServerMissingPackageWithCdName">
    <dialog/>
    TRACE      [iaxxgenimp.cpp:845]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxdlghnd.cpp:98]
               CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE      [iaxxgenimp.cpp:212]
               showDialog()
    <dialog sid="diCdServerMissingPackageWithCdName">
    <dialog/>
    INFO       2006-07-24 10:24:17 [syxxcfile.cpp:446]
               CSyFileImpl::copy(const CSyPath & ., ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file /root/backupmnt/temp/51030724_2/DVD_NW_04_SR1_SAP_Web_AS_JAVA/J2EE_OSINDEP/JDKVersion.xml to: ..
    INFO       2006-07-24 10:24:17 [syuxcpath.cpp:369]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/JDKVersion.xml.
    TRACE      [syuxctask.cpp:1242]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 3706
    ERROR      2006-07-24 10:24:17 [iaxxbprocess.cpp:927]
               CIaOsProcess::getReturnCode_impl()
    FSL-04005  Unable to wait for process with ID 3706. No child processes
    ERROR      2006-07-24 10:24:17 [iaxxbprocess.cpp:948]
               CIaOsProcess::getReturnCode_impl()
    FSL-04006  A system call failed due to unknown reasons: A process could not be waited for. No child processes.
    TRACE      [iaxxejsbas.hpp:270]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown std::ESyException: A process could not be waited for. No child processes
    WARNING    2006-07-24 10:24:17 [iaxxccntrl.cpp:477]
               CController::stepExecuted()
    The step getJavaHome with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome was executed with status ERROR.
    TRACE      [iaxxcsihlp.hpp:301]
               main()
    An error occurred during the installation of component SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System.
    TRACE      [iaxxgenimp.cpp:845]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxdlghnd.cpp:180]
               CDialogHandler::doHandleDoc()
    ACTION_OK received
    WARNING    2006-07-24 10:24:41 [iaxxcsihlp.hpp:250]
               main()
    An error occurred during the installation.
    Has anybody an idea whats wrong here?
    thanx

    Thanx Jeff!
    and sorry for replying so late
    like with many other things, reading notes carefully can help a lot
    problem was solved by setting
    LD_ASSUME_KERNEL=2.4.1
    for sapinst as described in sap note 722273

  • 2012 Guest Clustered SQL instance - Upgrade platform

    Currently I have several working 2012 Guest clusters for various functions.  I'm now looking at upgrading my "SQL Guest Cluster" which has 2 nodes (VMs) at Server 2012, 2 SQL 2012 instances, and is connected to shared storage through Virtual
    Fiber Channel.
    I know I can't have mixed OS levels in a Failover Cluster, which is what is making this difficult.
    What would be the best method for upgrading the 2 nodes to Server 2012 r2 (ie no-minimum downtime)?
    For a file share guest cluster I was able to evict a node, remove failover role, upgrade node, create new cluster ("name_r2_cluster"), migrate File Server Role to new cluster using cluster tool...however SQL is not supported for the copy function.
    Thanks in advance!

    Hi,
    Hyper-V live migration has been updated to support migrating Hyper-V virtual machines in Windows Server 2012 to Hyper-V in Windows Server 2012 R2. You can use the cross-version
    live migration migrate the vms.
    The related KB:
    What’s New in Hyper-V for Windows Server 2012 R2
    http://technet.microsoft.com/en-us/library/dn282278.aspx#bkmk_live_migration
    Migrate Hyper-V to Windows Server 2012 R2 from Windows Server 2012
    http://technet.microsoft.com/en-us/library/dn486799.aspx
    Hyper-V Cluster Using Cluster Shared Volumes (CSV) Migration
    http://technet.microsoft.com/en-us/library/dn486822.aspx
    The similar thread:
    Windows Server 2012 Failover Cluster Virtual Fibre Channel Adapter Live Migration Error
    http://social.technet.microsoft.com/Forums/fr-FR/2512d82e-7dda-4bb9-a96d-533bea79b2cb/windows-server-2012-failover-cluster-virtual-fibre-channel-adapter-live-migration-error?forum=winserverhyperv
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Integration of service processing with warranty claims node not appearing

    Dear experts, Plant Maintenance and Customer Service => Maintenance and Service Processing => Integration of Service Processing with Warranty Claims Integration of service processing with warranty claims node not appearing in SPRO.We are using ECC 6.

  • Refer an Open Forms, Items Contents from another Open Form

    Hi All, I need help on the following Questions. Q1. How can I find the Contents of an Item in a Form from another Form in the Same session. Q2. How can we save contents of a Called form when the Calling form is in Changed Status. (using When Validate

  • Determine which Windows Domain Controller I'm authenticating to:

    Thanks.  I've tried this:  "dscl . -read /Config/Kerberos:<YOUR.KERBEROS.REALM>" but I keep getting a "<dscl_cmd> DS Error: -14136 (eDSRecordNotFound)" error. I've substituted "<YOUR.KERBEROS.REALM>" with every known "mydomainname.com" variation I ca

  • Suspect 'activity' (log provided & analysis requested)

    Everytime I use my Air, after anywhere from 5 to 15 minutes it gradually starts making this loud 'fan' noise... and, if I'm on the internet, it's performance slows down dramatically. Does anyone have an inkling as to what may be going on here? Thanks

  • IMAQ vision acquisition does auto white/black level adjustment

    Hi, I am using IMAQ Vision to capture RS170 video from a device we manufacture. I have noticed that the white/black levels seem to be "adjusted" automatically for each image acquisition I make. I would like to turn this feature off, but cannot find a