SCOM 2012 R2 download issue.

Hi All,
When i go through below url, observed that 11 parts. Do i need to download all all bin files or anyone of them is enough?
http://www.microsoft.com/en-us/download/details.aspx?id=40844
1. OM2012R2_VHDEval.docx
2. SC2012_R2_SCOM_EVALVHD.exe
3. SC2012_R2_SCOM_EVALVHD-1.bin
4. SC2012_R2_SCOM_EVALVHD-10.bin
5. SC2012_R2_SCOM_EVALVHD-11.bin
6. SC2012_R2_SCOM_EVALVHD-12.bin
7. SC2012_R2_SCOM_EVALVHD-13.bin
8. SC2012_R2_SCOM_EVALVHD-2.bin
9. SC2012_R2_SCOM_EVALVHD-3.bin
10. SC2012_R2_SCOM_EVALVHD-4.bin
11. SC2012_R2_SCOM_EVALVHD-5.bin
12. SC2012_R2_SCOM_EVALVHD-6.bin
13. SC2012_R2_SCOM_EVALVHD-7.bin
14. SC2012_R2_SCOM_EVALVHD-8.bin
15. SC2012_R2_SCOM_EVALVHD-9.bin
Thanks in advance.

Hi,
Yes, all .bin files
Page 5 in the OM2012R2_VHDEval.docx
"Download the self-extracting SC2012_R2_SCOM_EVALVHD.exe file and all the .bin files to the computer that is configured with Hyper-V. You can download the files from the Microsoft Download Center."
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

SCOM 2012 R2 Agent Issue: Error 25211.Failed to install performance counters.. Error Code: -2147024809

Hi All,
I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
I've rebuilt the Perfmon Counters based on this article: https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
I've also enabled verbose logging on the msi installation:
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
Any help on this would be great.

Hi Stefan,
I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
Written a SQL query to gather more information. SQL query I used is:
SELECT
ME.FullName,
HSO.StartDateTime AS OutageStartDateTime,
DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
HSO.ReasonCode,
DS.Name AS ReasonString
FROM vManagedEntity AS ME
INNER JOIN vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
INNER JOIN vStringResource AS SR ON HSO.ReasonCode =
REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
– CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
INNER JOIN vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
AND DS.LanguageCode = ‘ENU’
AND ME.FullName like ‘%SERVER NAME%’ –Change name here or leave %% for ALL SERVERS
ORDER BY OutageStartDateTime
This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
Any help on this would be great.

SCOM 2007 R2 to SCOM 2012 SP1 upgrade issues.

We have SCOM 2007 R2 on one of our development Environment.
The plan was to upgrade to SCOM 2012 R2 so we installed the SCOM 2007 R2 CU5.
We are having issues to upgrade now from SCOM 2007 R2 CU5 to SCOM 2012 SP1.
While upgrading we received the below message:
Unable to Proceed
Setup is unable to proceed with installation for the following reason:
At least one of the following application is installed on the computer.Due to incompatibility with system center 2012 - operations manager,these applications must be uninstalled.
-System Center 2012 - operations manager beta
-system center operations manager 2007
-system center operations manager 2007 sp1
--system center operations manager 2007 r2
-system center service manager agent
--system center essentials agent

Hi,
You cannot upgrade from SCOM2007R2 to SCOM2012SP1, you must upgrade to SCOM2012 and the upgrade to SCOM2012SP1
Cameron Fuller has a blog:
http://blogs.catapultsystems.com/cfuller/archive/2013/02/11/can-you-upgrade-from-opsmgr-2007-r2-to-opsmgr-2012-sp1-scom-sysctr.aspx
Upgrading System Center 2012 – Operations Manager to System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899854.aspx
"The only supported upgrade path to System Center 2012 Service Pack 1 (SP1), Operations Manager is from System Center 2012 – Operations Manager. If you are upgrading from System Center Operations Manager 2007 R2, you must first upgrade to System Center 2012
– Operations Manager"
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM 2012 R2 Exchange Correlation Service , we receive almost at every day in the Event log Application the Event720

HI
Since the SCOM was Upgrade to R2
Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation
This arrives always around 7:20AM, someday is at 7:19, other at 7:21. It is always approximately at the same hour, but we never have any problem during weekend
The description of the Event
Exceeded maximum time (15 minutes) to wait for completion of all CorrelateBatchTask threads.
After that the correlation stop to work. At the Same time if we tried to open the SCOM Console on that server we was unable to open it. Also we was not able to open the SCOM PowerShell
And also we cannot from that server to get which server is the RMS if we run get-SCOMRMSEmulator . (This the RMS Server)
When this arrive, the only thing we found, it to reboot the server or restart de SCOM service, after the Reboot the Correlation begin to work
We got also many Event 714 Critical and after this Event 711 Warning
Thank

Have a look at: https://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
One user reported an issue with the exchange correlation engine after upgrade and said that:
I had issues with the corellation engine after upgrading scom 2012 to R2.
The MomBidLdr.dll version changed in the SCOM directories, and needs to be updated in the:
C:\Program Files\Microsoft\Exchange Server\v14\Bin directory.
That seemed to stop the errors for me.
Some troubleshooting steps listed here also:
https://technet.microsoft.com/en-us/library/ff360495(v=exchg.140).aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Issue upgrading SCOM 2012 SP1 to SCOM 2012 R2

I have been having a really fun time trying to get my test SCOM 2012 SP1 environment upgraded to SCOM 2012 R2. I initially had an issue with the DB server not accepting connections to SMB which was causing the upgrade to fail stating database permission
issues (that was a fun one to troubleshoot). Once I figured out that problem I am now getting an error in the OpsMgrSetupWizard log that is stating the following:
[14:46:47]: Always:
:LaunchMsiSetup: Complete: 2 seconds
[14:46:47]: Error:
:LaunchMsiSetup: Failed, return code: 1612
[14:46:47]: Error:
:Error:Failed to uninstall previous MOM product on this machine, cannot proceed with upgrade
[14:46:47]: Error:
:Error:Failed to uninstall Operations Manager Agent on this machine. This is fatal error, we cannot proceed with upgrade
[14:46:50]: Error:
:LaunchMSI: MSI E:\Setup\AMD64\Server\OMServer.msi returned error 1603
[14:46:50]: Error:
:ProcessInstalls: Install Item Management Server failed to install. We did not launch the post process delegate.
In the application log I am getting the following error:
"Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service
Manager is already installed. These must be uninstalled to proceed."
I have verified that I don't have any of these installed and have even gone so far as to remove my Config man agent and System Center Endpoint Protection just in case it was getting confused with System Center Essentials.
I am at a loss as to what to try next. Any suggestions?

Hi,
Check if you have the following registry. If so, please back it up first, then delete for a test.
HKEY_CLASSES_ROOT\Installer\UpgradeCodes\C96403E8AD6025B4F9E1FE9C574E34AE
Also, please uninstall MOM product and Operations Manager Agent manually to check the result.
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn249707.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 R2 System Performance Report issue

Dear All,
We have SCOM 2012 R2 with SQL Server 2012.
For last few days we are stucked with SCOM System Performance Report. We are trying to achieve following:
Generate a report of last 15 days of all the following components in a single report.
Get Memory Utilization of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing total Memory of the server.
Get Processor Utilization report of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing process installed on the server.
Get Disk Time report with (I/O) MB / Sec in Line Chart form.
I have tried creating a sample with photo editor to provide you better understanding of my requirement.
We can go for customizing reports with Report builder or any other tool which can help us achieve this task. Need your suggestion for the above.
Thanks
VN

1) open the url http://reportserver/reports where reportserver is your report server
2) navigate the folder Microsoft.systemCenter.Datawarehouse.Report.library
3) click the arrow of report Microsoft.SystemCenter.Datawarehouse.Report.Performance and select download
4) repeat setp 3) for Microsoft.SystemCenter.Datawarehouse.Report.Performance.rpdl
5) rename its file name and upload its into the folder Microsoft.systemCenter.Datawarehouse.Report.library
6) click the arrow of report which you upload on step 5) and select manage
7) update its DataWarehousMain --> A shared data source as /Data Warehouse Main
8) update Custom data source as Credentials are not required and click Apply
9) click the arrow of report which you upload on step 5) and select Edit in Report Builder
10) right click the unwanted part and delete
Roger

Issue with SQL Agent when install SCOM 2012 R2

Hi all,
i'm try to install SCOM 2012 R2 with all components (Mgmt Server, Operation Console, Web Console, Reporting Server)
Everything is fine, except Reporting Server. I have attached the picture below
I have also check the SQL Server Agent in SQL Server Configuration Manager. It has already started. But... i dont know why?
Is there anyone know what wrong it is??

Many thanks Gautam,
i have checked again in Repoting Services Configuration Manager & change the database to the local SCOM
Cause i'm using database for management server, dataware house on SCCM. So reporting service automatic set the database on SCCM also.... :(
So now i will show everyone who try to install SCOM
For the Management & DatawareHouse database --> you could install on any SQL Server (open port 1433)
For the Reporting Services:
On the local SCOM, install SQL Server with these components (SQL Engine: SQL Agent; SQL Reporting)
After install SQL successfully, login to the Reporting Services Configuration Manager to set:
First, create the new database on local SCOM
Second, Web Service URL. login to the IIS to create self-signed certification for own SCOM. then turn back too Web Service URL to create SSL Certification
Set SQL Agent service to Automatic, then start
so, that's all. I'm crazy with this issue for a whole day :)

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

SCOM 2012 Issue The Data Access service is either not running or not yet initialized

Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

Hi Need to download SCOM 2012 iso file for lab

Hi all
can anyone provide me link from where i can download SCOM 2012 iso as i tried
to download from
http://www.microsoft.com/en-us/download/details.aspx?id=36424 there are multiple files
which one i should download for lab environment.I want to set up Lab for SCOM in Vmware workstation.

This download link for SCOM VHD Lab not SCOM Source ISO,
You can register here and get download link for all system center, you can select only SCOM.
http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2
Regards, Ibrahim Hamdy

Issues with Monitoring Azure services with SCOM 2012 R2

Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
Colin

Hi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks.

NOT RESOLVED - SCOM 2012 R2 - App Advisor and App Diagnostics Issue

Hi there!
Here is our scenario: SCOM 2012 R2 is deployed in the environment
SCOM - Management Server and SCOM Management Console.
SQLOD - SQL 2012 Operational Database
SQLDW - SQL 2012 Data Warehouse Database, SQL Reporting Services, SCOM Reporting, SCOM Web Console.
Problem: SCOM Administrator is able to open SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console from any computer only after the SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console are opened
from SQLDW (i.e. after opening them from the place where they were originally installed). The errors message prompts to retry after adding the user to the proper groups for SCOM Application Advisor and SCOM Application Diagnostics. SCOM Web Console prompts
the user to login.
Workaround: Open SCOM Application Advisor, SCOM Application Diagnostics and SCOM Web Console on SQLDW (i.e. after opening them from the place where they were originally installed) and everything works fine.
Question: What is causing the issue and how to fix it?
Many thanks, in advance!

I followed the article and it did not fix the issue.
Here are additional details:
There is only one user who does not experience the issue and it is a user under whose credentials the SCOM was installed AND that user has to login from the local network. If this users tries to connect over VPN he receives the same error.
Here are errors when Test1 user logs in:
Application Advisor (Enabled authentication: Windows Authentication, Forms Authentication, ASP.NET Impersonation):
Authentication error
User account: DOMAINNAME\Test1
This user account does not have sufficient rights to use Application Advisor.
Ask your administrator to add this user account to the Operations Manager Report Operators role, and then try again.
Application Diagnostics (Enabled authentication: Windows Authentication, Forms Authentication):
Access denied
User account: DOMAINNAME\Test1
This user account does not have sufficient rights to use Application Diagnostics.
Ask your administrator to add this user account to the Operations Manager Application Monitoring Operators role, and then try again.
Operations Manager Web Console (Enabled authentication: Windows Authentication):
Prompted for credentials with error:
The user credentials are invalid or user does not have permissions to access the application.
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.Security.ConnectionSessionAccessDeniedException: The user access is denied.
This error reappears no matter whose credentials are entered. Even the SCOM Installer's credentials generate Error 3 when entered at the time when Test1 user is logged on.
App Pools:
OperationsManager - 4.0; Integrated; ApplicationPoolIdentity; 1 application
OperationsManagerAppMonitoring - 4.0; Classic; NetworkService; 2 applications
OperationsManagerMonitoring View - 2.0; Classic; NetworkService; 1 application
Added *://*.domain.local zone to the trusted zone in the Internet Explorer.
Please help!!!!

SCVMM and SCOM 2012 Integration Issues

Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!

I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this?

Top 4 basic issues that are encountered in SCOM 2012 and SCCM 2012

HI,
I need to give a presentation on the basic issues that are encountered in SCOM 2012 and SCCm 2012.
Can anyone help me out with this?
Thanks in advance
Rohith Kumar

Hi,
I am not familiar with SCCM, so I will give some issue I encounterred in SCOM:
1. Not monitored and grey agent, here is an article for your reference:
http://technet.microsoft.com/en-us/library/hh212723.aspx
2. Failed to discover and install agents, this may caused by the action account or install account does not have proper permissions to install the agents. Some time maybe the discovery rule is not enabled.
3. Failed to import Management Pack, this may caused by references MPs are not imported to the management group, or sometime the proper referenced MPs are imported, but there may be incorrect typing in the XML file which defines the management pack.
4. Runas account and Action account fail. If you change password for action account, you may also need to change the password everywhere the account is used in SCOM. For run as account, if the account does not have enough right to run some tasks, we may
encounter errors. You may refer to the below link which take SQL mp for example:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Regards,
Yan Li
Regards, Yan Li

Unable to download SCOM 2012 setup

Dear Experts,
I am not able to download SCOM 2012, SP1 and R2 versions from Microsoft.
I found a link for 180 days evaluation period but that is noe related to operation Manager I guess.
I request you all to please provide the correct path to download all the 3 versions of SCOM 2012.
Thanks,
Saravana
Saravana Raja

System Center 2012 SP1 trial
http://technet.microsoft.com/en-US/evalcenter/hh505660.aspx
System Center 2012 R2 trial
http://msdn.microsoft.com/en-us/library/dn205295.aspx
Roger

SCOM 2012 R2 download issue.

Similar Messages

Maybe you are looking for