SCOM 2012 R2 - Generate an alert when a specific event will not come in specific time range

Hello SCOM people,
I need to figure out what kind of monitor shall I choose for my monitoring of a specific event. I need to generate an alert when no specific event was generated by server.
Our company uses FIM 2010 with scheduled tasks, after each completed task is generated an event to application log. When sync is stuck or something is wrong no event will come to application log and I need to be warned. Tasks run each 30minutes and there
should not be an hour break between the previously created event.
I hope it makes sense :)
Thank you
Liibas

Hi Liibas,
That sounds like a good scenario for using Orchestrator and the SCOM Integration Pack, since you can have time-triggers, etc. to check for Alerts and then trigger a Runbook to email someone if the Alert does/does not appear. 
Please remember to click “Mark as Answer” on the post that helps you.
AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud)
2015 Microsoft MVP in System Center Cloud and Datacenter Management
LinkedIn: http://ca.linkedin.com/in/adinermie
Website: http://micloud.azurewebsites.net

Similar Messages

  • Ipad mini became hot when charging and now will not come on. All usual resets have been tried

    Mini ipad became hot while charging and will not come on.  Normal resets have been tried.

    I am assuming that you let the device cool down completely before you tried powering up. I don't know what more you might want to try...recharge, restore...the usual troubleshooting steps. Once again, assuming that the device has completely cooled down, I would let the device charge all night, try resetting one more time and if that fails, try restoring the iOS.
    If that fails, make an appointment at an Apple Store and let an Apple Genius evaluate the damage.
    Use iTunes to restore your iOS device to factory settings

  • I have an alert message in safari that will not let me exit safari. I tried the force quit did not work

    I have an alert message in safari that will not let me exit safari, I tried to force quit but it would not let. What do i do next?

    Shut it down and when it says to reopen windows disable it

  • When installed, LR CC will not start.

    I just upgraded LR5.7 to LR CC, but when installed, LR CC will not start. No error messages, no hour glass thinking. Nothing. It's just dead. I'm using Windows7. Any one else had the same problem?

    That file is part of the Microsoft Visual Studio distributable package that is available from this link:
    Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center

  • On-the-go playlist bug when it contains podcasts (will not play them)

    Hello,
    I want to report a bug in the iPod Nano 3rd generation. Here are the steps to reproduce, first to check that the playlist works with only songs, and then to see that it does not work with songs and podcasts, and lastly to see that it does not work at all with only podcasts.
    1. Clear the On-the-go playlist.
    2. Add any number of songs to the On-the-go playlist (let's say 3).
    3. Confirm that you can play the playlist by selecting it in the list of playlists and hitting the play button on your iPod. The Now Playing screen should say "1 of 3".
    1. Clear the On-the-go playlist. If it was playing it should now be stopped.
    2. Add any number of songs to the On-the-go playlist (we'll add 3 for now).
    3. Add at least one podcast to the On-the-go playlist.
    4. Highlight the On-the-go playlist in the list of playlists. It should say "4 Songs".
    5. Hit the play button. The Now Playing screen will say "1 of 3". At the end of the third song you will be returned to the Playlists screen without the podcast ever having been played.
    1. Clear the On-the-go playlist.
    2. Add at least one podcast to the On-the-go playlist. We''ll add 2 podcasts.
    3. Go the Playlists screen and highlight the On-the-go playlist. It should say "2 Songs".
    4. Hit the play button. The Now playing screen should show, the songtitle displayed is that of a song that was playing recently. There will be no album art displayed, even if that last songs did have album art associated with it. The screen will say "1 of 0" and there is no sound. There is no play/pause indicator next to the battery indicator. The time indicators are "0:00" and -"0:00" left and right respectively. You can hit the center button and try to scrub the position on the bar, it will not go beyond the time of the last song that was played on the iPod.
    Should you reset the iPod and try to play the playlist with only podcasts now, the screen will have no song information, just the missing album art picture and "1 of 0". There is also no time indicators and the bar on the bottom is as wide as the screen minus its normal padding.
    If you hit the center button while in the Now Playing screen with the "1 of 0" display, and you then try to scrub the player the iPod will reset.
    Can someone confirm this bug? Is there a fix?
    I really like to have multiple podcasts in the On-the-go playlist when using Nike+ and now I can't. I don't like to have to reach for my iPod during running to start another podcast, because you have to pause the workout to do that. I don't want to save the playlist, because I won't ever use it again, so I'd just have to remove it again. If it could just work, that'd be great, thanks!

    Well, I guess Apple just doesn't care about bugs in the iPhone or customer satisfaction. Just as long as they have the money they couldn't care less about anything else.
    Thanks Apple!

  • Iphone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    IPhone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    have the same issue even after upgrading to 8.1

  • My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    I have a similar problem.  I restored my iPhone 5 to the latest available OS.  After completing the process the phone never restarted.  The phone was fully charged when I restored it but now refuses to charge past the red battery icon.  I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone.  The Apple logo does come on and the software fully loads.  iTunes tells me the phone will restart but never does.  I left it to charge all night but it never appeared to load the battery.  This morning I went to the Grand Central Terminal apple store for help.  A woman at the store plugged the phone in but it never charged.  She absolutely refused to believe that I got my phone in UFD mode and loaded any software on.  I don't think it is a battery issue.  The only solution I was given was to buy a new phone.  Repairing it was out of the question.  At this point the phone is completely useless.  Thanks in advance for the help.

  • I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    Hi there 8472kck!
    I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    and that information comes from this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted?  Also password to icloud is never saved?

    Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted?  Also password to icloud is never saved?

    I read someone said you can tap on "other" when selecting which wifi you connect to and then entering the exact wifi name of the network you wish to join and the password and then joining that network allowed the password to be saved.  Also with iOS 6 the minimum length of the password needs to be 8 characters.  Maybe you password on your router is less than 8 characters long

  • U/tube videos open when using Safari but will not open when using Firefox.

    u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

    Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
    Try the following:
    Repair permissions & restart.
    Make sure you have the latest versions of Adobe Flash Player Software
    QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
    Deactivate the "Flash Media" option.

  • I was on the phone last night and my phone randomly turned off.  It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer.  What do I do?

    I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

    Plug it into power for at least 15 minutes.  If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

    Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

    savannahp
    What version of Premiere Elements and on what computer operating system?
    Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
    Red Noir. Does any of the following apply to any of what is happening to you.
    - Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
    This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
    Please review and consider and then we can proceed from there if necessary.
    ATR

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • I'm trying to run a video that requires QT 2.2.1, but QT is up to 7. It keeps telling me to download 2.2.1 off the disk, but when I try, it will not complete--any suggestions?

    I'm trying to run an educational video which says it requires QT 2.2.1. QT is up to 7. So, it says to download off the CD, but when I try, it will not download. Any suggestions...

    QuickTime version 2 is almost 20 years old and will not install on a modern machine.
    You may be able to manually seach the CD to find the video content and it may be viewable in QuickTime Player 7.

  • I cannot get my iPhone3 to sync playlists. If I create the play list on my iPhone, when I sync the playlist is deleted. If I create te playlist on iTunes, when I sync, it will not transfer to my iPhone. Help!

    I cannot get my iPhone3 to sync playlists. If I create the play list on my iPhone, when I sync the playlist is deleted. If I create te playlist on iTunes, when I sync, it will not transfer to my iPhone. Help!

    Hello jmazumba
    Continue your troubleshooting with the article below to resolve the issue with connecting to iTunes. It will walk you through checking the drivers as well as third party security software for any conflicts.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

Maybe you are looking for