SCOM 2012 R2 on Windows Server 2012 R2 console crash

I have a brand new install of Windows Server 2012 R2, SCOM 2012 R2 with all the latest windows updates available. Whenever I go to the authoring/overrides section I get a pop-up dialog re: the Microsoft .NET framwor / unhandled exception "A generic
error occurred in GDI+ - Also my 'scope bar' has a red X through it - see screen shot. I can continue, and use the console, but it's annoying.
Any ideas?
B. Wright

Hi Wright,
I also had a similar issue like the one which you are facing. I just re installed the .NET Frame work 4.0.3xx and it resolved my issue. Please check the below thread which i raised for your reference. Hope it helps you.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/22754c30-a528-4f07-9383-834ebb8aa92a/i-get-a-debug-error-in-scom-2012-r2-when-i-open-the-active-alerts-tab-in-monitoring-session?forum=scomapm

Similar Messages

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

How can I upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials?

I have just installed Windows Server 2012 Essentials on my Home Network (from the installation DVD). I have done absolutely no configuration Installing Server 2012 was an oversight; I meant to install Server 2012 R2 Essentials.
I tried to correct by installing R2 from its DVD, hoping it would do an upgrade. That didn't work.
Is there a simple way to make it possible to install the correct OS?   For example, can I just demote the existing server and remove any roles that were installed, so that the R2 disk will install over top of the existing installation?
Alternatively, is it safe to just reformat the partition and install R2?
http://technet.microsoft.com/en-us/library/dn408635.aspx seems to imply that this is OK.
David Pike, P.Eng, MCITP

Hi Larry.   Thanks for the reply. It didn't work, but I don't believe you are wrong. Rather I think there is something weird in my system. I'm marking your reply as answer.
Some background: I'm repurposing an older PC (Compaq SR1614X) as a home server, to manage my home network, use as a gateway to my Azure server, and to help my Server 2012 training (on MVA). I've been messing with it for nearly two months,
on and off. From the start, I've had trouble installing the server 2012 software (see previous threads August-27 and August-16
), but when I got to the point that I could install Server 2012 Essentials, I thought I could upgrade to Server 2012 R2 Essentials exactly as you suggest. That was where you helped me a lot, i.e. you confirmed that my expectations were reasonable.
So when it didn't work, I spent most of yesterday trying various different procedures. I got tantalizingly close, but still no cigar.
I can install any Windows Client and Server 2012 Essentials, but the R2 Essentials installation never finishes; it goes into an "error 0x000000C4" boot loop. At first I wondered if it was because I was installing a server over a
server, but you confirmed that's not the issue. I later verified that I cannot install R2 over Windows 7 either, whereas R1 over Win7 is fine. I can only surmise one of two problems:
I have a bad installation disk
There is a hardware issue
I plan to eliminate (1) by creating a new disk from a new download. I have verified that the latest ISO file and the one I have been using have identical byte counts,
For (2), I had suspected that the problem was that the older system has no UEFI, but since R1 installs OK, I am discounting that. Today's effort: to eliminate the DVD drive, I will try booting from a Flash Drive. To eliminate
the hard drive, I will try installing to a different drive.
I am hoping you can help with one more thing. When I run setup.exe with the /noreboot option, I have a better chance of success. The option suppresses the first reboot only, but that one (after "Expanding the setup files") always
fails, so suppressing it gets me almost to the end of the install. Is there a way to modify setup.exe so the it always runs with the /noreboot option?

Clustering Free Hyper-V or Windows Server 2012 Standard with Windows Server 2012 Datacenter

Hi,
Is anyone running a cluster which has Datacenter 2012 clustered with either Standard 2012 or Hyper-V 2012?
I have seen posts here and elsewhere that say it is possible but when I rang Microsoft Licencing team to discuss licensing in this scenario they advised me that the hardware and OS on each clustered server must be identical.
Now I'm really confused.
Thanks,

Please repost in the proper forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
This forum is for the product Virtual Server 2005, not Hyper-V.

Windows Server 2012 R2 - SharePoint 2013

After an front end server upgrade from Windows Server 2012 Datacenter to Windows Server 2012 R2 Datacenter of our SharePoint 2013 farm, the following error is being experienced when trying to open a document library with Windows Explorer (this
feature worked prior to the upgrade): Message from webpage "We're having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again."
Our domain is in the trusted sites list (*domain.com), the Webclient services are running, and the User Interfaces and Infrastructure > Desktop Experience feature is installed.
It looks like this error was previously remedied with KB2903928. This update doesn't seem to apply to Windows Server 2012 R2 Datacenter.
UPDATE: We have also discovered that site email boxes are not working.
Thank you for your assistance,
Jeanne

Hi,
Glad that the issue was solved.
Meanwhile, please understand that before the release of Microsoft SharePoint Server 2013 Service Pack 1 (SP1), Microsoft did not support the installation of SharePoint Server 2013 in a Windows Server 2012 R2-based environment.
http://support.microsoft.com/kb/2891274/en-au
Regards.
Vivian Wang

Oracle database 12c on Windows Server 2012

Hello,
Is it Oracle database 12c compatible with Windows Server 2012. What are the system requirements needed for Windows server 2012 on Oracle database 12c?
Thanks
Voitto

Hi Voitto,
Actually , it is not a windows related question .
But I found some infomation :
Oracle Database for Windows x64 is supported on the following operating systems:
Windows Server 2008 x64 and Windows Server 2008 R2 x64 - Standard, Enterprise, Datacenter, Web, and Foundation editions.
Windows 7 x64 - Professional, Enterprise, and Ultimate editions
Windows 8 x64 and Windows 8.1 x64 - Pro and Enterprise editions
Windows Server 2012 x64 and Windows Server 2012 R2 x64 - Standard, Datacenter, Essentials, and Foundation editions
http://docs.oracle.com/database/121/NXDQI/toc.htm#NXDQI111
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Windows server 2008 R2 to Windows server 2012 R@ Upgrade

We have Team Foundation server 2010 server configured in our environment.
operating system: windows server 2008 R2 Datacenter
Server installed: Team foundation server 2010 with share point services 3.0.
we need to upgrade this server with windows server 2012 R2 and Team foundation server 2010 as it is.
need to upgrade as below:
operation system windows server 2012 R2 Datacenter
Server Installed : Team foundation server 210 with sharepoint services 3.0 as it is.
I have tried to direct upgrade by running a setup of windows server 2012 R2 but it shows error message if : "
When you upgrade Windows Server 2008 to Windows Server 2012, you receive the following error message:
Windows won’t install unless each of these things is taken care of. Close Windows Setup, take care of each one, and then restart Windows Setup to continue.
Windows needs to be restarted so necessary changes to system files can be made before continuing.
Make these changes:
Turn off these Windows features.
Windows SharePoint Services 3.0 – Please read Microsoft Knowledge Base article: 962216
I have installed sharepoint 3.0 with sp3. but still I am geeing same error.
we need to upgrade operating system,n in place.
Kindly request you for the quick response.

Hi,
To understand more clearly regarding upgrading issue here providing you link for more information.
Upgrade Options for Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303416.aspx
Install and Deploy Windows Server 2012 R2 and Windows Server 2012
http://technet.microsoft.com/en-us/library/hh831620.aspx
Hope it helps!
Regards.

Windows Server 2012 Storage Spaces Simple RAID 0 VERY SLOW reads, but fast writes with LSI 9207-8e SAS JBOD HBA Controller

Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?

Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?
1) Yes, being slow either on reads or on writes is a quite common situation for storage spaces. See references (with some of the solutions I hope):
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a58f8fce-de45-4032-a3ef-f825ee39b96e/
http://blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storage-spaces-is-it-for-you-could-be.aspx
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/64aff15f-2e34-40c6-a873-2e0da5a355d2/
and this one is my favorite putting a lot of light on the issue:
http://helgeklein.com/blog/2012/03/windows-8-storage-spaces-bugs-and-design-flaws/
2) Issues with SATA-to-SAS hardware is also very common. See:
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/5d4f68b7-5fc4-4a3c-8232-a2a68bf3e6d2
StarWind iSCSI SAN & NAS

Windows Server 2012 R2 Essentials Trial Key - Did I miss it, too?

I tried both "Windows Server 2012 Essentials" and "Windows Server 2012 R2 Essentials". Here is the link to the page I downloaded the images:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
The following are the respective links to the images I used which were provided by the above webpage:
http://care.dlservice.microsoft.com/dl/download/1/2/9/129AEC4F-1C6C-44B2-9B61-77935E8AB1F4/WindowsServer2012Essentials-English-Install.iso
http://care.dlservice.microsoft.com/dl/download/8/F/7/8F7024D2-AB2A-4BE2-8406-1E3AC49C5C1F/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO
I tried burning these images to DVD and booting my Intel NUC with resulting disc. Setup goes fine but it asks me for a product key. I have not received any mail nor was there any pointers to a product key. This is why I tried both R1 and R2.
I found a similar post here regarding this issue (in fact I found a couple):
http://social.technet.microsoft.com/forums/windowsserver/en-US/db7fd5b9-f58d-4456-86cf-816ec91ded14/windows-server-2012-trial-key-did-i-miss-it
But the answers were unsatisfactory, so please do not give me the same response.
Just in case the question/directive comes up, I redownloaded and re-burned the images using sector verification. There are no checksums posted on the site so who knows if something got broken while downloading it, but I find it extremely unlikely that
a few bad sector would cause the intaller to forget its evaluation key rather than borking the whole installer.
Further note that I tried "Windows Server 2012 R2" (standard / non-essentials) and that image correctly had the trial versions baked in. So, I would bet dollars to donuts the problem lies in the images not in a download / burn failure.
I want to use the new NUC as a central content/backup server for all the home computers which are unfortunately growing at bunny reproduction rates. Since Windows Home Server was discontinued, I was pointed to Server 2012 R2 as the alternative / upsell.
Let me know if this is the case or if a better-fit product exists.
Also, is the "Essentials" install a simply a licensing matter (e.g., 25 user cap) or is it more fundamentally crippled than the standard version? I am only a home enthusiast and so not really interested in using the product in a production environment.
I only want some ensurance that if I download "standard", I can put in an "essentials" key at the end of evaluation. If not, then please point me to a correct "Windows Server 2012 R2 Essentials" trial image.
Thanks,
Ryan

Hi Ryan,
à
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
We can find following description from this TechNet Evaluation Center website. Then please check if you can
find product key.
In addition, for Windows Server 2012 Essentials, please check if you can use
HHRHF-YMNJW-RPGCC-VV68W-BWMVY. For Windows Server 2012 R2 Essentials, please check if you can use
R9N79-23MWD-MBP9B-KHF8Q-C36WX.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to convert VHDX to VHD file format on windows 8 / Windows server 2012?

Here is an article to describe how to convert virtual hard disk VHDX file format to VHD
http://anuraggawande.blogspot.in/2012/10/vhdx-to-vhd-conversion.html

Hi,
Thanks for sharing the web link!
You help other community members who facing similar problems.
Thanks for your contribution to Windows Server Forum!
To convert VHD format, you can also use Convert-VHD comlet. The Convert-VHD cmdlet converts a virtual hard disk file by copying the data from a source virtual hard disk file to a new virtual hard disk file of a specified format and version type. The format
is determined by the file extension of the specified files, either .vhdx or .vhd. Conversion is an offline operation; the virtual hard disk must not be attached when the operation is started.
For more information please refer to following MS articles:
Convert-VHD
http://technet.microsoft.com/en-us/library/hh848454.aspx
Windows Server 2012: Convert VHD to VHDX using Hyper-V Manager
http://blogs.technet.com/b/aviraj/archive/2012/05/06/windows-server-2012-convert-vhd-to-vhdx-using-hyper-v-manager.aspx
Using PowerShell to Convert a VHD to a VHDX
http://blogs.msdn.com/b/virtual_pc_guy/archive/2012/10/03/using-powershell-to-convert-a-vhd-to-a-vhdx.aspx
PS - Convert VHD
http://gallery.technet.microsoft.com/scriptcenter/1dd3c524-e4e6-44cd-9573-406151237139
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Upgrade Windows Server 2012 to Windows Server 2012 R2 in-place upgrade

I have tried to do an in place upgrade for Windows Server 2012 Standard to Windows Server 2012 R2 using the in-place upgrade at least a dozen times. Always with the same unhelpful failure message.
I have tried downloading the latest (setup) update and not downloading it - makes no difference - same error.
I would really rather upgrade this server than re-install. I have scoured the internet looking for answers and I can't find anything useful.
I have downloaded the latest 2012 R2 Standard iso. The version of 2012 installed is a stock retail Standard version it was never an eval version.
Any help much appreciated.
Andy

I did check the article. I did the ADPREP as described and adprep worked fine. Unfortunately it did not make any difference. Log entries below:
setupact
2014-05-28 07:56:56, Info MIG End of hive list
2014-05-28 07:56:56, Warning [0x0803db] MIG IndirectKeyMapper: RegLoadKey(HKEY_USERS,S-1-5-21-902023783-652776199-2643897273-500 (1),C:\Users\Administrator\NTUSER.DAT) failed; giving up (32)
2014-05-28 07:56:56, Error [0x08039d] MIG Cannot add mapping for user profile C:\Users\Administrator. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl
Mig::CIndirectKeyMapper::CIndirectKeyMapper(class UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]
2014-05-28 07:56:56, Error [0x080801] MIG User profile loading error. Aborting due to external request.[gle=0x000000cb]
2014-05-28 07:56:56, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$ONLINE_RW$ELAM (error 1314)
2014-05-28 07:56:56, Warning [0x0809d4] MIG Failed to close keymapper 'ELAM': error 1314
2014-05-28 07:56:56, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$ONLINE_RW$ELAM (error 1314)
2014-05-28 07:56:56, Error MigStartupOnline caught exception: Win32Exception: User profile loading error. Aborting due to external request.: The specified user does not have
a valid profile. [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform::ProcessUser(class Mig::CRegistryDataStore *,class Mig::CRegistryDataUnit *,class UnBCL::String *,class UnBCL::String *,int,int)
2014-05-28 07:56:56, Info Leaving MigStartupOnline method
2014-05-28 07:56:56, Error MIG pDoOnlineGather: Engine initialization failed with error: 0x00000004
2014-05-28 07:56:56, Error [0x0800ad] MIG Callback_GatherOldSys: Migration phase failed.
2014-05-28 07:56:56, Info MIG PublishCriticalError: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest updates.
2014-05-28 07:56:56, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress.
2014-05-28 07:56:56, Info UI Entering Page Cancel.
2014-05-28 07:56:56, Info [0x0a0035] UI Allowing Page 'App Compat' to be shown
2014-05-28 07:56:56, Info [0x0a0035] UI Allowing Page 'App Compat' to be shown
2014-05-28 07:56:56, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-05-28 09:17:28, Info [0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler
2014-05-28 09:17:28, Info [0x0a0023] UI progress task ProgressInfo\SendDiagnostics : StartProgress
2014-05-28 09:17:28, Info DIAG DiagnosticDataSendWorker: Phase=1 Start time was 0X309961825, End time was 0X309962C98, total time was 0X1473
2014-05-28 09:17:28, Info [0x070044] DIAG DiagnosticDataSendWorker: startSetupTimeInSecs = 0X309962634
2014-05-28 09:17:28, Info [0x070045] DIAG Processing Diagnostic data at 2014-05-28 09:17:28
2014-05-28 09:17:28, Info [0x070046] DIAG DiagnosticDataSendWorker: endSetupTimeInSecs = 0X309963AA8
2014-05-28 09:17:28, Info DIAG DiagnosticDataSendWorker: setupInstallTime = 0X1474
2014-05-28 09:17:28, Info DIAG DiagnosticDataSendWorker: User is NOT OPTED-IN for SQM and Watson.
2014-05-28 09:17:28, Info [0x0a0024] UI progress task ProgressInfo\SendDiagnostics : EndProgress
2014-05-28 09:17:28, Info [0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
2014-05-28 09:17:28, Info DIAG Module path is [C:\$WINDOWS.~BT\Sources\setup.exe]
2014-05-28 09:17:28, Info DIAG Module version is [6.3.9600.16384 (winblue_rtm.130821-1623)]
2014-05-28 09:17:28, Info DIAG Module path is [C:\$WINDOWS.~BT\Sources\setup.exe]
2014-05-28 09:17:28, Info DIAG Failed install count for build [6.3.9600.16384 (winblue_rtm.130821-1623)] is [12]
2014-05-28 09:17:28, Info IBS Successfully incremented the failed install count on this machine
2014-05-28 09:17:28, Info [0x0800af] MIG Leaving Callback_GatherOldSys (failure)
2014-05-28 09:17:28, Info [0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
2014-05-28 09:17:28, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2014-05-28 09:17:28, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2014-05-28 09:17:28, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2014-05-28 09:17:28, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
2014-05-28 09:17:28, Info [0x0500bd] DU Module_Term_DU called
2014-05-28 09:17:28, Info [0x050081] DU Done with DU. DUMgr is cleaning up...
2014-05-28 09:17:28, Info [0x050082] DU Cleanup completed
2014-05-28 09:17:28, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
2014-05-28 09:17:28, Info [0x06010d] IBS Module_Term_Productkey: Valid product key in blackboard, show property set to hide.
2014-05-28 09:17:28, Info UI CallbackWin32UITerminate: Deleted WizardUI
2014-05-28 09:17:28, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
2014-05-28 09:17:28, Info [0x0601d7] IBS InstallWindows:Error Type = 3211266
2014-05-28 09:17:28, Info [0x090009] PANTHR CBlackboard::Close: c:\$windows.~bt\sources\panther\setupinfo.
setuperr
2014-05-28 07:56:56, Error [0x08039d] MIG Cannot add mapping for user profile C:\Users\Administrator. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl
Mig::CIndirectKeyMapper::CIndirectKeyMapper(class UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]
2014-05-28 07:56:56, Error [0x080801] MIG User profile loading error. Aborting due to external request.[gle=0x000000cb]
2014-05-28 07:56:56, Error MigStartupOnline caught exception: Win32Exception: User profile loading error. Aborting due to external request.: The specified user does not have
a valid profile. [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform::ProcessUser(class Mig::CRegistryDataStore *,class Mig::CRegistryDataUnit *,class UnBCL::String *,class UnBCL::String *,int,int)
2014-05-28 07:56:56, Error MIG pDoOnlineGather: Engine initialization failed with error: 0x00000004
2014-05-28 07:56:56, Error [0x0800ad] MIG Callback_GatherOldSys: Migration phase failed.
Kind regards, Andy CISSP, GCIA, GCIH, GPEN, GWAPT, CSTA, CSTP Blog.InfoSecMatters.net

How to make directaccess windows server 2012 access the IPv4 link

HI all,
I have built a directaccess for win7 with IPv4 only intrant successfully,and it work's good.but here is a problem that I can't access the IPv4 link,for example I can access
http://www.test.com ,but I can't access the url http://192.168.13.13 .I have many links use IPv4 address,so I can't access these resources through directaccess,what should
I do to make it works.

Hi,
Direct Access is an IPv6 technology. Clients send only IPv6 packets to DirectAccess server. We need an IPv6/IPv4 translator here.
Choose Solutions for IPv4-only Intranet Resources
http://technet.microsoft.com/en-us/library/ee382298(v=ws.10).aspx
And in windows server 2012 we have built-in NAT64 and DNS64.
Windows Server 2012 Direct Access – Part 1 What’s New
http://blogs.technet.com/b/meamcs/archive/2012/05/03/windows-server-2012-direct-access-part-1-what-s-new.aspx
Hope this helps.

Adobe Reader Enterprise for Windows Server 2012 (R2)

Hi,
I want to silently install the latest version of Adobe Reader on a Windows Server 2012 server. When I want to download the offline installer at http://get.adobe.com/nl/reader/enterprise/ I do not see Windows Server 2012 (and/or R2) listed. Is the offline installer supported for Windows Server 2012 and/or Windows Server 2012 R2?
How can I get this to work?
Thanks in advance.

The Technical Specifications are here: http://www.adobe.com/products/reader/tech-specs.html
It doesn't mention Windows Server 2012.
If this is for Citrix or WTS you should get a distribution agreement and then also get the Distribution version of Adobe Reader.

Windows server 2012 R2 replication

Hi all,
I have windows server 2012 standard edition and Recently I rented a new dedicated server from the data center. My new dedicated server has Windows server 2012 R2 standard edition. The problem is when I am doing a replication from windows server 2012 standard
to windows server 2012 r2 standard I do not see SYSVOL share in my windows server 2012 R2 standard. I see all the active directory users have been replicated but not the share.
How can I solve this issue? Anyone can help me with this?
net share
Share name Resource Remark
C$ C:\ Default share
F$ F:\ Default share
IPC$ Remote IPC
ADMIN$ C:\Windows Remote Admin
The command completed successfully.
Thanks

Hello,
seems for me that the Promotion from the new DC didn't went well. In your case remove the new machine from the domain, disconnect and use dcpromo /forceremoval and run metadata cleanup on the Windows server 2012 DC.
http://msmvps.com/blogs/mweber/archive/2010/05/16/active-directory-metadata-cleanup.aspx
Tthen assure that you use ONLY the existing DC/DNS server on the NIC from the new machine, NONE else, even not if this machine should become DNS server role, and run dcpromo again to join it to the exiting domain.
So the schema was upgraded to version 69 as Windows server 2012R2 requires this?
http://blogs.msdn.com/b/muaddib/archive/2012/07/03/determine-active-directory-schema-version.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Windows Server 2012 Essential Role

I am running Win2k12 R2, and have available the essential role. Can someone explain what feature would I gain from having this role?

fyi, there is a forum specifically for Essentials:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials
And here is a brief explanation of the features gained with Essentials:
http://blogs.technet.com/b/sbs/archive/2012/07/17/windows-server-2012-essentials-feature-list.aspx
For small networks data protection (pc backup to the Essentials Server) and Anywhere Access are probably the two standouts. The SKU for Essentials only is limited to 25 users and 50 devices to be backed up. The Essential Role expands this to
"about" 100 users or devices, although there are seemingly no hard limits.
Here is a third party listing of the "cool" things about the Essentials role in a server domain.
http://www.techrepublic.com/blog/10-things/10-cool-new-features-in-windows-server-2012-r2-essentials/
A little research will turn up lots of articles to help you form your policies in your network.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

SCOM 2012 R2 on Windows Server 2012 R2 console crash

Similar Messages

Maybe you are looking for