SCOM 2012 R2 Post upgrade issues

Hey all,
yesterday we upgraded our SCOM environment from 2012 SP1 to R2. All of the installers ran fine without any issues. After a couple reboots it was back up however we have run into some issues.
Issue 1: The ACS seems to be broken. I can usually run a query on the ACS database manually and get back audit entries. However, now I am getting nothing back at all. Here are the errors that are repeated every few minutes on both
management servers. I did run the ACS upgrade on them both yesterday.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 14
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
Database: Register
Connection: ComplianceTest
Statement: -
Error occured on database connection:
Status: 0x00200001
ODBC Error: 14
ODBC State: 08001
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection.
Database: Register
Connection: ComplianceTest
Statement: -
Issue 2: Our UNIX agents are all greyed out now and when I try to upgrade them I get the following error.
EDIT: and here is something else I just found on our other management server
Any info would be great
Thanks
Warm Fuzzies!

I am going to update this post. The service is still crashing nightly. The views dvAll, dvAll5 and dvHeader are not being created. I tried the fix provided by the Microsoft rep and it did nothing. I have uninstalled and reinstalled
the ACS server multiple times and the views are never created. When I start the ACS services I get the same errors.
AdtServer encountered the following problem during startup:
Task: Load Certificate
Failure: Certificate for SSL based authentication could not be found. SSL authentication will be disabled
Error: 0x00000002
Error Message:
The system cannot find the file specified.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 4624
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot grant, deny, or revoke permissions to sa, dbo, entity owner, information_schema, sys, or yourself.
Database: SqlWriter
Connection: Maintenance
Statement:
I see where the forwarders are connecting. No other errors or messages. The service is set to start up as the Network Services account. The DOMAIN\SERVER$ has a logon and is mapped to the SQL user AdtServer on the OperationsManagerAC database.
We have almost a terabyte of data that we cannot get to after the R2 upgrade.
Very frustrating!!!!
Warm Fuzzies!

Similar Messages

SCOM 2012 R2 agent upgrade fails crippling agents

Running into a large amount of SCOM agents that are failing the upgrade from 2012 SP1 to R2 and would appreciate any feedback from my SCOM community colleagues. Warning this issue is not for the faint of heart.
Plan:
I am in the process of upgrading 1900 manually installed SCOM 2012 SP1 agents to R2. I am using SCCM to deliver the upgrade using the standard sanctioned upgrade parameters.
Momagent.msi /qn /l*v %SystemDrive%\SCOM2012AgentUpgrade.log AcceptEndUserLicenseAgreement=1
Problem:
I have run into a problem where on a larger group of systems, 165 servers, where the upgrade fails and leaves the agent in a crippled state. At this point the agent cannot be removed cleanly via add remove, nor can a straight install of the agent
be done. What is required is a manual removal of registry keys and then a clean install of the agent can be performed to remediate. This is no problem and I am able to do this. (Note: all other methods of agent removal did not work ie:
Cleanmom.exe utility or add remove)
Task:
Seeing that we need to do agent upgrades in the future it would be great to know why this happened so we can plan for this in the future.
Notes:
Seems like a random sample of servers (2003/2008) with different applications running on them so that doesn't help in narrowing things down.
Looking at the MSI log, I see a common issue among systems that had this problem.
******* Product: {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'DisableMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Looking for sourcelist for product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Adding {387306D9-78CE-4E0E-B952-28A50CC8B3EE}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Now checking product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media is enabled for product.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Trying source C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 2203 2: C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\MOMAgent.msi 3: -2147287037
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing net source list.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing media source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 2203 2: 3: -2147287037
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Processing URL source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Failed to resolve source
MSI (s) (7C:8C) [08:08:44:744]: Note: 1: 1714 2: Microsoft Monitoring Agent 3: 1612
CustomAction returned actual error code 1612 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (7C:8C) [08:08:44:744]: Product: Microsoft Monitoring Agent -- Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Action ended 8:08:44: RemoveExistingProducts. Return value 3.
Action ended 8:08:44: INSTALL. Return value 3.
Ok so the obvious is that the installer is looking for original source installation files and not able to find them. What is surprising to me however is that the product references a 32 bit scom agent guid
387306D9-78CE-4E0E-B952-28A50CC8B3EE, however this is a 64 bit machine. Our build process dictates that a 64 bit machine only receive a 64 bit SCOM agent.
Doing a search on this product guid I realized I skipped some other references at the top of the MSI log that might offer some more explanation...
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_OM12_SP1_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Modifying OM_OM12_SP1_AGENT_FOUND property. Its current value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'. Its new value: '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_OM_AGENT_FOUND
Action ended 8:08:11: FindRelatedProducts. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_OM_AGENT_FOUND.
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_MOMV3_AGENT_FOUND
Action ended 8:08:11: _Set_OM_AGENT_FOUND. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding MOMV3_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_MOMV3_AGENT_FOUND.
Well that is interesting, seems to me that in the first line the MSI installer reads the OM_OM12_SP1_AGENT_FOUND property and identifies this with a 64 bit agent guid (8B21425D-02F3-4B80-88CE-8F79B320D330), but then appends
the 32 bit guid at the end (387306D9-78CE-4E0E-B952-28A50CC8B3EE). This is the point of my confusion and my suspicion as the cause of the problem I am having.
Concluding thoughts:
Why does the installer seems to first recognizes a 64 bit agent, but then later changes it's property to include a 32 bit agent guid.  Could a 32 bit agent have got on this 64 bit server based on the details of this log? Would this
cause my agents to fail the upgrade? I think so, but looking to bounce this over to another fellow SCOM colleague who may have wrestled with this before.
Thanks in advance if you took the time to read this and think about it. Extra points if you have any extra thoughts!
Keith

Hi,
Have you used Requirement to limit the platform when you deploy application with SCCM.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 R2 UR4 upgrade question - where exactly is the UNIX/Linux agent?

I am practicing the UR4 on a test |SCOM environment (my first upgrade) and our UNIX Admins have requested the "UNIX/Linux agent" so they can create packages to upgrade the UNIX/Linux agents when the time comes.
I have downloaded all the UR4 updates/software. Where exactly is the agent for UNIX/Linux machines?
I opened the "Update Rollup 4 for Microsoft System Center 2012 R2 - Operations Manager Agent (KB2992020)" folder and I saw the following agents:
amd64-agent.msp
i386-agent.msp
Are one of these the UNIX/Linux agents?
I know I'm overlooking something here since this is my first time. Any assistance is greatly appreciated.
Thanks

Hello,
After deploy UR4: http://support.microsoft.com/kb/2992020
Installation instructions for Operations Manager - UNIX and Linux Monitoring (Management Pack Update)
To install the updated monitoring packs and agents for UNIX and Linux operating systems, follow these steps:
Apply Update Rollup 4 to your System Center 2012 R2 Operations Manager environment.
Download the
updated management packs
(http://www.microsoft.com/downloads/details.aspx?FamilyID=9f947878-6bf6-48a1-adb1-3cc4c2e5d4af)
for System Center 2012 R2.
Install the management pack update package to extract the management pack files.
Import the updated management pack for each version of Linux or UNIX that you are monitoring in your environment.
Upgrade each agent to the latest version by using either the Update-SCXAgent Windows PowerShell cmdlet or the UNIX/Linux Agent Upgrade Wizard in the Administration pane of the Operations Console.
Regards,
Regards, Mazen Ahmed

Post Upgrade issue

Hello Gurus,
we are upgarding SAP from 4.6c to ECC 6.0.
As a part of post upgarde activities , i am executing SU25 2(B)-(D) steps.
While analysing SU25 2(b) step, i had found that few authorization objects which are checked in 46c version and not found in SU24 proposal in new version.
For example:
for transaction CG02 , in 46c sU24 proposal authorization objects C_SHEP_TPP is check/maintain, whereas in ECC version this authorization object doesnot appear in the SU24 proposal of CG02 transaction.
Also there are few objects which are check maintain in R3 version and Do not check in the new version for the same transaction.
How should i get the same SU24 values in ECC version as in R/3 version ?
This is my first upgrade project, iam very much confused with these inconssitencies, any help is very much appreciated.
Thanks,
Sanketh.

I have found all such type of Conflicting tcodes and sent for client approval.
Meanwhile, iam doing Su25 2(B) for remianing transactions, i had a doubt here the SAP defaults for R/3 are not the same as in the ECC version, Suppose for transaction /SAPSMOSS/QM12
Authorization objects PLOG ,PABAP,P_ORGXX,S_dataset,S_develop are maintained as check in R/3 whereas in ECC the SAP defaults for these objects are Check No.
Whether i should change the proposal to Check Yes in ECC version or maintain the SAP Defaults as it is in ECC version.
Will it affect to be any authorization issue, please clarify.
Thanks,
Sanketh.

SCOM 2012 RTM CU3 upgrade error

I tried to install CU3 on a 2012 RTM server and after installation the Health Service will not start. It was installed by Windows Update as I figured Microsoft would not push it there unless tested.
I get the following errors in the OpsMgr Log:
Event ID: 20056: Failed to initialize the IPC channels for other processes to communicate. The HealthService might fail to start
Event ID:2000: The Management Group MG failed to start. The error message is 0x80131501(0x80131501). A previous message with more detail may have been logged.
Data Access Service and Configuration Service are running fine. Anyone else seen this or have an idea on how to solve it?

To resolve this issue use either of the following methods:
1. Use Gacutil /u with the dllname that was added then restart the computer. Gacutil is available from http://msdn.microsoft.com/en-us/library/ex0ss12c(VS.80).aspx
or
2. Navigate to C:\windows\assembly and look for the dll affected, right click on this DLL, and select Uninstall.
Once you do either of these, the management group should start and the events should no longer be logged.
More Info: The global assembly cache is located at c:\windows\Assembly see http://msdn.microsoft.com/en-us/library/yf1d93sz(vs.71).aspx for details.
For more information, please review the link below:
Management Group Fails to Start after OpsMgr 2007 R2 upgrade - Logs event IDs 20056, 2000
http://blogs.technet.com/b/operationsmgr/archive/2009/04/22/management-group-fails-to-start-after-opsmgr-2007-r2-upgrade-logs-event-ids-20056-2000.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Post upgrade issues from Timezone setting

Everyone,
We just upgraded from 4.5 -> version 6.0 SP1 (so we first upgraded the data to 4.5 WS then to version 6)
After the upgrade, we saw the web service registration to have the send timezone setting to portlet as checked for all the portlets that were upgraded/migrated.
Then after the DB upgrade, we saw some portlets not displaying because of a person's time zone setting. This went a step further and there are users who reported that they can't access the change locale settings page or even add portlets to their page.
A PT spy of the users experience showed this particular error: com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView LocaleSettingsView::Display An error occured when trying to display the HTML.
System.InvalidCastException: Specified cast is not valid.
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsModel.GetTimeZoneSetting() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsModel.cs:line 192
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView.Display() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsView.cs:line 59
I noticed that the cast error originates from the GetTimeZoneSetting() method. This led me to believe that some values in the DB were unexpected. True enough, I noticed that for the strTimeZone preference some users has a value of 1/-1 and the PrefValueType is set to 3 (instead of 8). After modifying this we resolve the issue and the users could proceed as normal.
My question is that has anyone else experienced a similar issue(or is this just specific to our environment)? Also is there a list of settings/preference you need to check for data integrity after an upgrade? Thanks!

I experienced an issue similar to this once. I don't know if it was exactly the same because it was a 4.5 to 5.x upgrade done a couple years ago, but it sounds like pretty much the same thing. I also tracked it down to a pref problem in the database. I had to manually fix the bad values, but that resolved the problem, and that was the only problem of that type I encountered. That doesn't mean you won't find anything else strange with your upgrade, but it seemed to be a strange isolated incident to me. I have done many upgrades since that time, and never encountered the problem again. I would suspect that if you have fixed all the database records that were affected by this, then you are probably OK.
DJ Dewey | VHA Inc. | [email protected]

Satellite A300 - Windows 7 post upgrade issue

G'Day All,
I have made 2 posts to Microsoft Discussion groups:
*Post 1:*
G'Day All,
Just upgraded two (networked) Vista Systems to Win 7 HP (32-bit).
Minor network/Homegroup problems - all resolved.
Desktop - Fine.
Laptop - ??
Toshiba Satellite 300.
After restart, any login shows 'Performance Options' dialog - no pagefile.
Administrator a/c may change (Automatic/Managed/Manual) - 'Restart required'
as expected.
GoTo previous paragraph (loop).
Any offers?
Regards,
Pat Garard
Melbourne, Australia
*Post 2 (Self-reply):*
For those who may follow ...
The solution may be found at:
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f
>Run the following from an elevated CMD prompt:
> sc config afs start= disabled
>
>(note that the syntax of the command is very particular -
>there is no space before the =, but there is one after it)
>
>Then, reboot.
>To start an elevated CMD prompt, click the start orb,
>type cmd.exe {in the search box at the bottom that has the focus},
>and then in the list right-click CMD.exe and choose "Run as Administrator".
AFS - APPEARS TO BE a distributed network filesystem ...
It would be wonderful if somebody knowledgeable could clarify all this ...
... how it came to be on a Toshiba laptop ...
... Could it be "SQL Server Active Directory Helper" (the only difference
between desktop and laptop) ? ...
... why is it a problem? ...
... is the solution a problem that has not yet manifest? ...
... and its impliications!
Regards,
Pat Garard
Melbourne, Australia
Is there a "Toshiba" explanation?

Hi mate
First of all it seems that its not clear for you that this is a user to user forum
You can start a discussion with common Toshiba notebook users
Back to your posting;
To be honest its not clear for me what you are talking about or what the problem is
You try to upgrade the Vista to Win 7?
Well, please note that there are some installed applications which could not be supported by Win 7!
Maybe you should take a look here:
+Windows 7 upgrade: Step-by-step Upgrade Guide+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R02.htm
+Windows 7 upgrade: Notes and Restrictions+
http://aps2.toshiba-tro.de/kb0/TSB9A02PE0000R01.htm
Check it! Maybe it could be useful.

SCOM 2012 SP1 Agent install issue

Dear all,
Wheni try to push SCOM client , getting below error. Any idea what would be issue ?
The Operations Manager Server could not execute WMI Query "Select * from Win32_OperatingSystem" on computer XXX.XXX.XXX
Operation: Agent Install
Install account: XXXXXX
Error Code: 800706BA
Error Description: The RPC server is unavailable.

Looks Firewall issue only , i have opened below ports , is there any mandatory ports required for SCOM agent installation ?
443
TCP
445
TCP
135
TCP

SCOM 2012 and New-WebServiceProxy issue to access C:\Windows\Temp

I am currently development management pack for data center equipment. This management pack connect to a WCF service (hosted as windows service on one of the management servers in the management group). WCF service works as intermediate layer between equipment
and management pack. It connects to equipment and does following task periodically:
1. Connect to equipment
2. Generate inventory information from equipment
3. Collect fault information
4. Map inventory information to faults
Management pack connects to WCF service and requests the inventory information, fault information etc. Following is the way to access WCF service.
$wcfConnection = New-WebServiceProxy http://<fqdn of management server>:8732/DataCenterEquipmentService
Now we use connection object to retrieve the data.
$wcfConnection.GetFaults() will provide me fault data as XML and using MOM.ScriptAPI object we insert data to SCOM.
Now the issue is when create WCF connection object, it throws errors:
Could not load file or assembly 'file:///C:\Windows\TEMP\gjdtzucb.dll' or one of its dependencies. The system cannot find the file specified.
This arbitrary dll file name is very random and every time it tries to make connection to WCF service, it throws random dll name.
Please help me to resolve this issue.
Thanks,
-Mukul

Hello Mukul, were you able to resolve this? I am getting the exact same error. Thanks.

"The feature you are trying ot use...." iTunes post upgrade issue

Hi,
Tried to download the automatic upgrade for Quicktime & iTunes. Something went wrong I guess.
When I try to open iTunes now, it gives me an error message that says "This action is only valid for products taht are currently installed."
If I try to uninstall iTunes (through Control Panel), or run the upgrade program again through Quicktime (which works fine), or try to run a brand new setup file for iTunes, I get a Windows Installer dialog that states "The feature you are trying ot use is on a network resource that is unavailable."
It then gives me the option for which source to use for the installation package 'iTunes.msi'
I've tried putting in both the iTunes.msi and the iTunesSetupAdmin.msi in there, both of which result in saying that the path for iTunes.msi cannot be found.
I am the only user on this computer, and have Admin privedges. Any ideas?

Solved problem myself after over an hour of googling/searching these forums for answer:
The reason this wasn't working, it seems, is because while upgrading I didn't click "Accept" on the user agreement, and restarted the computer before accepting. I tried playing a file that is associated to open with iTunes (which isn't my default mp3 player), and a dialog popped up for me to accept the agreement. Clicked accept, iTunes immediately started working.
Feel real dumb now, hope this thread helps someone else one day.

Post upgrade issues inSU25 2(B) step

Hi ,
I have few query regarding this SU25 2(B)
1.This step will lists out all the transactions that are modified in older version from SAP Defaults.
I had observed that only the objects for which the modified flag is set in USOBX_C , there is a conflict.
But what about the object which are maintained in older version, for example :S_TABU_DIS, it has been miantained with some auth group value in older version , there is no value maintained in newer version, but it is not showing as a conflict.
If we click on change and save the transaction, will the maintained values in older version wil reflect in the newer version ?
Please clarify on this point.
I want to clarify this point before executing this step.
Thanks,
Sanketh.

thanks for the reply prashanth.
Can you please elaborate how can weget the same SU24 values in ECC 6.0 as in R/3 system.
Sanketh.

Issue upgrading SCOM 2012 SP1 to SCOM 2012 R2

I have been having a really fun time trying to get my test SCOM 2012 SP1 environment upgraded to SCOM 2012 R2. I initially had an issue with the DB server not accepting connections to SMB which was causing the upgrade to fail stating database permission
issues (that was a fun one to troubleshoot). Once I figured out that problem I am now getting an error in the OpsMgrSetupWizard log that is stating the following:
[14:46:47]: Always:
:LaunchMsiSetup: Complete: 2 seconds
[14:46:47]: Error:
:LaunchMsiSetup: Failed, return code: 1612
[14:46:47]: Error:
:Error:Failed to uninstall previous MOM product on this machine, cannot proceed with upgrade
[14:46:47]: Error:
:Error:Failed to uninstall Operations Manager Agent on this machine. This is fatal error, we cannot proceed with upgrade
[14:46:50]: Error:
:LaunchMSI: MSI E:\Setup\AMD64\Server\OMServer.msi returned error 1603
[14:46:50]: Error:
:ProcessInstalls: Install Item Management Server failed to install. We did not launch the post process delegate.
In the application log I am getting the following error:
"Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service
Manager is already installed. These must be uninstalled to proceed."
I have verified that I don't have any of these installed and have even gone so far as to remove my Config man agent and System Center Endpoint Protection just in case it was getting confused with System Center Essentials.
I am at a loss as to what to try next. Any suggestions?

Hi,
Check if you have the following registry. If so, please back it up first, then delete for a test.
HKEY_CLASSES_ROOT\Installer\UpgradeCodes\C96403E8AD6025B4F9E1FE9C574E34AE
Also, please uninstall MOM product and Operations Manager Agent manually to check the result.
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn249707.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Dashboards Problem after SCOM 2012 Inplace Upgrade- Missing Stored Procedures

Dears,<o:p></o:p>
After finishing SCOM 2012 in place Upgrade I face a problem on Performance and Service level dashboards, the Upgrade has been finished successfully as shown below
But after I start Dashboards configuration I receive below errors
After troubleshooting I see an error in Event viewer beside the errors on Snapshots above said that
Fault Detail is equal to could not find stored procedure
so I compared Stored Procedures under SCOM data warehouse database with another SCOM 2012 installation (different customer) and i see a lot of Missing Stored Procedures
(all Stored Procedures start with 'SDK.Microsoft_SystemCenter_Visualization are missing)
Here i am stuck, I don’t know what I can do, I have some ideas but i don't know if its will work.<o:p></o:p>
My ideas are:<o:p></o:p>
1. Repair SCOM 2012 Installation (does the repair option will repair the databases)
2. Re import Default SCOM Management packs like (Microsoft.SystemCenter.Visualization.Library.mpb) (does MP contains Stored procedures in the Database)<o:p></o:p>
3. Install Rollup Update (may during installation it will create missing Stored Procedures)
4. Move Stored Procedures from other SCOM server installation
Please advise its strange issue
Appreciate Your help
Note:<o:p></o:p>
Everything is work correctly regarding Raising alerts , generate reports , servers state , reset and recalculate health state, installing and ininstalling agents and others.

Hi,
Could you post the error message in forum directly? This snapshot it too fuzzy to know what the exactly meaning is.
Alex Zhao
TechNet Community Support

Question on upgrading to SCOM 2012 R2 form SCOM 2012 SP1

Hello!
I planned upgrade to SCOM 2012 R2 form SCOM 2012 SP1.
Should I install any or last update rollup package to my SCOM 2012 SP1, before upgrading to SCOM 2012 R2 ?

It is highly recommend that you has install most updated CU before upgrade SCOM 2012 sp1 1 to SCOm 2012 R2 but it is not necessary. You should view NEPA PFE Team blog that demostrate how to upgrade SCOM 2012 SP1 with CU4 to SCOM 2012 R2.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
Roger

Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
Mike

Hi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support

SCOM 2012 R2 Post upgrade issues

Similar Messages

Maybe you are looking for