SCOM 2012 repair and rebuild

Hello Gurus
I have a quick question. I have a SCOM server that is giving me weird errors, I have already posted the question at http://social.technet.microsoft.com/Forums/systemcenter/en-US/b034c553-c1b9-4152-bb77-d9a29906d25c/scom-2012-r2-network-monitoring-error?forum=operationsmanagergeneral#b034c553-c1b9-4152-bb77-d9a29906d25c
but no answers :(
I would have loved to troubleshoot the error but since time is running out, I am thinking maybe to re-install the server. Every other component of SCOM is working, so I was wondering, is it possible for me to keep the other settings and configuration of
SCOM in the new SCOM installation. I want to retain the following specifically:
Management pack and their customization
The workgroup server management certificate
Server inventory
Overrides
Reporting and analysis service
Web console configuration
Account and run as profile configuration.
Alternatively, I am okay if I can only get rid of the network device inventory from the database. I believe the issues that I am facing are because of rogue records of network devices in the database. I am okay with removing them and starting the discovery
of the network devices again.
Any help will be greatly appreciated.
Regards,

Verify that SNMP open in core switch to Management Server {#snmp-server community "Password" username}and verify from string community (case sensitive)
If not worked, Delete Network Device and reconfigure it again
To Delete Network Device, follow the below steps
In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
remove them.
Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
you can also check below link to remove/restore network device
http://technet.microsoft.com/en-us/library/hh212795.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Since iPLM failed to help try the following:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Difference between scom 2012 sp1 and SCOM 2012 R2

what is the difference between scom 2012 sp1 and SCOM 2012 R2 ?

What's New in System Center 2012 R2 Operations Manager:
https://technet.microsoft.com/en-us/library/dn249700.aspx

Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

Hi,
It is listed here:
http://technet.microsoft.com/en-us/library/dn281933.aspx
Configuration Manager 2012 r2 and DPM 2012 r2 does not support AlwaysOn.
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCOM 2012 Closed and Open Alert Reports

Dear all,
In SCOM 2012 R2 how to Generate a report that contain open and closed alerts for past 24 hours. Is there any inbuild report ?
Thanks,
Sengottuvel M

Yes, you can this with Report "Alerts" (http://technet.microsoft.com/en-us/library/hh212929.aspx)
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Repair and Rebuild Aperture Library Failed

This is similar to an earlier discussion but following those suggestions didn't work, so am posting this Q == I have a library from 2009 that has 10G in it. It is a 3.4.5 Aplibrary and on trying to open it it says it has to be upgraded [not sure why] and then it comes back saying it can't = I tried to repair and also did a rebuild, and imported it into a new library == in all cases there is nothing there = no projects, no photos -- this is on an internal drive on my MacPro and all dries are extended/journaled.
I opened the package contents and find the following -- before I do anything else, what should I do next?

Looking at your screen shot it does not appear promising. The Masters folder as well as the Previews, Thumbnails and others are reporting there size as 0 bytes, basically empty. Were the masters in this library referenced?
You say this is a library from 2009 but that it was a 3.4.5 library, how can that be? 3.4.5 is a fairly recent release. Did you open and upgrade this library at some point before trying to open it now?
Message was edited by: Frank Caggiano - BTW is this related to your other thread on the library size discrepancy between copied Aperture libraries?

SCVMM and SCOM 2012 Integration Issues

Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!

I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this?

SCOM 2012 collect Windows Audit logs and forward them to a Linux Syslog server

Hello:
1. We have a SCOM 2012 server.
2. We have SNARE agents for PCI systems, but now we want to save money by gathering all events for all Windows servers using its native features.
3. We also have a centralized Linux server running SYSLOG which aggregates the logs to our Dell LogVault retention appliance (for PCI purposes)
Thus, my question:
In effort to remove the SNARE agents from the windows servers, can we implement Audit Collections Services (ACS) in the windows environment so that they collect/forward audit/event logs to the SCOM 2012 server and then SCOM forwards the events to the centralized
syslog Linux server? In which case they are aggregated to the Dell appliance.
We prefer to use the Linux syslog as the centralized log server but would like to know how to go about implementing the solution above.
Many thanks,
Robert Perez-Corona

Hi,
Here is a thread about how to make SCOM 2012 work as a syslog server, hope this can be helpful for you:
https://social.technet.microsoft.com/Forums/en-US/524ea527-c069-40f9-96ef-026a4aa06fe9/make-scom-2012-a-syslog-server?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 Datawarehouse event id 31553 and after 2 minutes successful id 31572

Hello guys,
I'm running SCOM 2012 SP1 and in one of my 3 Management groups i got the following events. I get them every few minutes and i cannot explain it. I have checked the aggregation of the DW and its fine. I Have extended the timeout from 5 to 15 minutes ... What
should i do next. Please help with this. I have checked all 2007 posts but they are not related to my problem. I have tried a number of queries but they don't return any result. Do I have a SQL server performance issue ?
Date and Time:
10/27/2014 11:05:10 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Data Warehouse related event collection
Event Number:
31553
Level:
Error
Logging Computer:
User:
N/A
Description:
Data was written to the Data Warehouse staging area but processing failed on one of the subsequent operations. Exception 'SqlException': Transaction (Process ID 71) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData
Instance name: server2.mymg.corp
Instance ID: {EBD49B2A-D314-07DF-9E2C-B79CF86B1A72}
Management group: MyMG
Date and Time:
10/27/2014 11:26:36 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Data Warehouse related event collection
Event Number:
31553
Level:
Error
Logging Computer:
server10.mymg.corp
User:
N/A
Description:
Data was written to the Data Warehouse staging area but processing failed on one of the subsequent operations. Exception 'SqlException': Transaction (Process ID 68) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData
Instance name: server10.mymg.corp
Instance ID: {DBDD19A5-98B3-F90A-641E-7C4693BFD6EB}
Management group: MyMG
Event Data:
View Event Data
< DataItem
type ="
System.XmlData "
time =" 2014-10-27T11:26:36.2773982-05:00
" sourceHealthServiceId
=" DBDD19A5-98B3-F90A-641E-7C4693BFD6EB
" >
< EventData
>
< Data > MyMG</
Data >
< Data >
Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData
</ Data
>
< Data > server10.mymg.corp
</ Data
>
< Data >
{DBDD19A5-98B3-F90A-641E-7C4693BFD6EB}
</ Data >
< Data >
SqlException </
Data >
< Data >
Transaction (Process ID 68) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
</ Data
>
</ EventData
>
</ DataItem
>
User:
N/A
After 2 minutes i will have the 31572 which is
Data writer successfully performed data maintenance operations. What would be the reason for this ?

There are a few things that can cause this. Your hint here is the deadlock message; processes are competing to write data in the DW, so you need to find out what that is. You also have a message stating that data is written to staging, but timing out moving
the data. If you happen to be running the Exchange MP, this creates an additional data set that can quietly clog up the works--but you would see that dataset in the event message as well.
Because you say aggregation is moving, try following these steps, they have served me well. I think you are seeing the results of data getting 'stuck' that causes the system to slowly choke itself. Note: You can focus on just the perf dataset, but always
a good idea to make sure everything is healthy while you're at it.
Steps:
Check to see if the staging area for data written to the DW is clear and data is moving:
select count(*) from Alert.AlertStage
select count (*) from Event.eventstage
select count (*) from Perf.PerformanceStage
select count (*) from state.statestage
These values normally rise and fall rapidly. If you open each table, they should also only contain recent data. If you find any data points older than a day, something is stuck. In one case I found state.statestage stuck around 14300. A look at the data
showed a few hundred rows of data that had information 4 months old.
See if data is moving (if you have old data, the answer is evident):
1. select * from StandardDataset
2. Plug the appropriate GUID into exec StandardDatasetMaintenance @DatasetId='<GUID from query>'
3. See if the count decreases
If it doesn't, if the data is expendable, just truncate the table (don't be afraid to do this--if OpsMgr is choking, stop the choking, and don't fret over missing data points)
truncate table state.statechange
Optional query:
Plug the DatasetId into the below query
USE [OperationsManagerDW]
DECLARE @DataSet uniqueidentifier
SET @DataSet = (SELECT DatasetId FROM StandardDataset WHERE DatasetId = '138B1324-BE31-42D7-A6CB-EA10139E309C')
EXEC StandardDatasetMaintenance @DataSet
Note: Valid current values are Event, Alert, CM, Perf, State
If these check out, it's time to
See if any SQL jobs are running that could be interfering
If you are not out of space, but close, and autogrow is killing your performance
Run the large table query to see if you have unchecked perf data growth that exceeds the performance capability of the SQL box
You may indeed have a SQL performance issue, but that's the last thing you troubleshoot--make sure OpsMgr is healthy first

SCOM 2012 R2 Reporting services installation error - data reader account

I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.

Adding more info：
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Copy\Paste Views not working in SCOM 2012 R2 console

Dear Concern,
Hi, I am using SCOM 2012 R2 and i have come across a problem that when i copy a view and try to paste it in same management pack, the paste action is not working. Cut and paste is working fine but copy paste not working. When i copy any view, the paste option
come alive but did not work when i clicked on it.
Has anyone tried and tested it?
Regards,
Jazeel Ahmed Siddiqui

Hi,
I have tested it in my SCOM 2012 SP1 Environment and it worked there from Sealed to Unsealed and Unsealed to Unsealed.
I have no R2 Environment in reach at Moment so i cannot test it there.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

Installation of SCOM 2012 R2 with Orchestrator 2012 SP1 already installed

I'm new here and found this set up.
SCOM 2012 SP1 that was mis-installed badly. No DW, no Data Read or write account used. SPN's missing etc. Nothing is working on the SCOM Server. It's not connected to any other parts of System Center.
Orchestrator 2012 SP1 installed and seems to be working fine.
I know that I'm suppose to upgrade Orchestrator to R2 before upgrading SCOM 2012 to R2. But, I need to install SCOM 2012 R2 right now to ensure monitoring is in place. The question I have is can I install a fresh SCOM 2012 R2 and then go back and upgrade
Orchestrator to R2 or do I have to upgrade Orchestrator 2012 to R2 before I install the new SCOM 2012 R2?

Hi Bigredchief,
Yes, it's recommended by Microsoft to update the Orchestrator first and then SCOM.
Look at the diagram between SC components here:
http://social.technet.microsoft.com/wiki/contents/articles/13188.system-center-2012-integration-guide.aspx
and for Orchestrator here:
http://social.technet.microsoft.com/wiki/contents/articles/13185.system-center-2012-integration-guide-orchestrator.aspx
It’s clear visible from diagrams that SCOM monitors the Orchestrator by Management Pack and Orchestrator is connected to SCOM by Integration pack through Operations Manager SDK connection. The second link as well describes the integration between these 2
components of SC (see #5.3).
You should analyse your System Center components integration, and check if any Orchestrator runbooks communicate to SCOM. In general it will be 2 risk components in such upgrade (SCOM and then Orchestrator) in my opinion - not supported officially by MS
in case of any issues, and stopped working SCOM connected runbooks.
Natalya

SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

We are running SCOM 2012 SP1 and added a test Linux server running Red Hat Enterprise 6.3. SCOM is reporting that the server is in Critical health because the following three services are not running.
1) Process Rpcbind Service Health - Rpcbind Mapper Not Running
2) Process Rpcidmap Service Health - NFSv4 ID Name Mapper Not Running
3) Process Rpcstat Service Health - NSM Status Monitor Not Running
My question is that are these services required to be running in order for SCOM to monitor the Linux servers properly? If yes, can you please give brief explaination as to why so I can explain that to our Linux Administrator. The Linux Administrator
is saying that we do not run these services on any of the Linux servers because they are not needed. If infact these services are not needed, how can I have SCOM ignore the critical error messages? Thanks

Yup, generally running. I'm assuming you've done a basic install of RHEL 6. All processes listed above are enabled by default on a RHEL 6 install if you take the default settings. If someone is just getting started you can pretty much guarantee
they will do a basic install of RHEL 6 and this will not be an issue.
Could it be done better... sure but at what point do you stop? We could discover all services running on the system and start monitoring them out of the box but what are important and what are not to each customer? The idea is to give you some basic monitoring
on a default install based on what each OS provider starts on a "default" install. If this does not suite your needs SCOM is very configurable and adding a custom service monitor is very easy to configure along with disabling existing ones.
If you'd like to provide feedback on this feel free to open a support ticket with Microsoft and file what we call a 'Design Change Request' [DCR]. We go though these prior to starting each update to SCOM. No guarantee it will get fixed/changed as we do have
priorities but we are listening.
Regards,
-Steve

Maps SCOM 2012

Hello Guys
I have installed SCOM 2012 R2 and I need to map the monitored servers but no license sharepoint enterprise to create with Visio pluging monitoring views.
I've already posted dashboard in SharePoint but I have not found another way to create a similar topology to what can be achieved with Visio.
I would like your help to know if there is another way to create topologies (maps) and be published by example in html o in sharepoint.
Regards
SAN

No, you will need to create Maps for SCOM 2012 R2 by Dashboards. you can't do it through SharePoint by .html
http://blogs.technet.com/b/momteam/archive/2012/05/31/using-the-web-application-availability-monitoring-to-monitor-web-applications-health.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

SCOM 2012 repair and rebuild

Similar Messages

Maybe you are looking for