SCOM 2012 Single Management Group Supporting ?

Dear all,
Can any one tell me , for single SCOM management group howmany management server and Gateway server can support?
Thanks,
Sengo

Hi,
Take a look in the System Center 2012 Operations Manager sizing tool which you can find
here.
Agents
3 000
agents reporting to a management server
2 000
agents reporting to a gateway server
15 000
agents (Windows, UNIX or Linux) in a single management group
Regards,
Daniel
IT Consultant at Viridis IT

Similar Messages

SCOM 2012 - Additional Management Server - Database not Found (no errors)

Hello,
I am installing a second management server (SCOM 2012) and am running into an issue connecting to the existing database.
I selected Add a Management server to an existing management group.
On the installer page Configuration/Configure the Operational Database, I enter the sql server name (fqdn) just as I did on the first management server (i took screenshots of the entire install so I could verify what I am
doing). Then the installer takes over for a second to verify the server information. There are no errors but the Database Name is blank, no choices in the drop down, nothing auto-populated.
If I put an incorrect server name in there is an error (as is expected). The port I am connecting on is the same one as the first management server: 1433.
The servers are both running Windows Server 2008 R2 (64bit). They were both created from the same template at the same time.
I used the ODBC Data Source Administrator to test a connection to the SQL server from the Additional Management Server and the test completed successfully.
I checked in the Operations Console to see if there was an entry in the Management Servers list for this second server and there is only the First management server listed there.
Please let me know if you have any suggestions as to how I can see the database names when the server conneciton is not failing. Thanks in advance.
Zach

Hi,
Are the accounts permissions correct? Are you using the same account you used installing the first management server and is it a local admin on the 2nd management server?
If all the above can be answered with yes please check if the 2nd management server is already known inside OpsMgr. If it is delete it from here and try again.
You can also check the OpsMgrSetup.log for more detailed information.
Your problem might be a known one:
http://social.technet.microsoft.com/Forums/en-US/operationsmanagerdeployment/thread/25b05b2f-dd90-44e5-a5cb-c51c9e4944d2
Hope this helps,

Event ID 26319 on SCOM 2012 R2 Management server with RMS emulator role

Hi all,
Two weeks ago we've setup a new SCOM 2012 R2 environment.
We now have the problem that event 26319 is logged every 5 minutes.
An exception was thrown while processing GetUserRolesForOperationAndUser for session ID uuid:dca9765e-37a4-40fc-bb9e-575f278447f9;id=63.
Exception message: Value does not fall within the expected range.
Full Exception: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromStringSid(String SidString, Int32 lOptions, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.GetScopedRoleAssignmentsForUser(Int32 operationNumericId, String userName)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AuthorizationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.ServiceDataLayer.SecurityConfigurationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy.GetUserRolesForOperationAndUser(Guid operationId, String userName)
In the previous weeks I've imported some management packs and did some changes in the user roles.
I've now deleted all custom created user roles but the event is still being logged.
Where does the 'Value does not fall within the expected range.'
message points to ?
Is this related to a imported MP ? I've deleted the built-in administrator user and replaced it by an admin group.
Where do I start to troubleshoot this issue ?
Kind Regards,
J. Monnens

Yes, it's related to import MP.
For this issue, KB980862 - Event ID 26319 is logged when you import a management pack in Operations Manager 2007 R2
Also you can check below link
http://thoughtsonopsmgr.blogspot.com/2011/08/eventid-26319-exception-was-thrown.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCOM 2012 Operations Manager Failed to start a process

We have recently upgraded from SCOM 2007 to SCOM 2012. We are not getting a great deal of “Operations Manager Failed to start a process”. The process varies including:
DiscoverSQL2008ASDiscovery.vbs
DiscoverSQL2008DBEngineDiscovery.vbs
DiscoverSQL2008ASDiscovery.vbs
Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs
I have researched and researched. I know that you can try to run the scripts locally on the machine but it seems the scripts never make it to the machine. I go to the path in the error, no luck. I look in the other folders as I know that SCOM moves the scripts,
and I even search the entire C drive but the scripts are not getting to the server. The folder is not even making it. For example:
Command executed: "C:\Windows\system32\cscript.exe" /nologo "Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs" SERVER true Working Directory: C:\Program Files\System Center Operations Manager\Agent\Health Service State\Monitoring
Host Temporary Files 11606\1759\
The script is not there and the folder \1759 is not there either.
I have removed and reinstalled the client.
Antivirus is fine, up to date and not blocking on any of the machines.
I have stopped the “System Center Management service” and renamed the “Health Service State” folder and it recreates fine but not long after I get the warning in SCOM about “Operations Manager Failed to start a process”.
I look in event viewer for Operations Manager on this particular one and I see a lot of:
Performance data from the Health Service could not be collected since required registry keys could not be read, the error was 2L (The system cannot find the file specified.). Event ID 6001.
I tried the fix of
"lodctr MOMConnectorCounters.ini" and "lodctr HealthServiceCounters.ini" but I get “error
encountered while updating text in registry. Status: 0”. Again I am using SCOM 2012.
Do I need to look at each failed script or is there a overall issue because the scripts are not making it to the machines. Any ideas?

I guess you might need to run "mofcomp sqlmgmproviderxpsp2up.mof".
Thanks, S K Agrawal

SCOM 2012 R2 Management Pack for Fortinet

Is there any management pack to monitor fortinet for scom 2012 R2

Hi Syed,
As well, you can try to monitor your Fortinet with SNMP traps:
http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/
http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/snmp_setup.html
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

SCOM 2012 R2 Management Packs for monitoring IBM Tivoli

Are there management packs available to monitor IBM Tivoli through SCOM 2012 R2?
If yes, what all components in IBM Tivoli family can be monitored?
Thanks in advance

Hi,
I think if there is any Management Pack for IBM Tivoli, then this Management Pack should be provided by IBM, and this may be fee-based also, I would like to suggest you contact IBM for this.
And hope the below link be helpful:
http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 UCS Management Pack Configuration/Administrator Guide

Hi,
We are planning to use SCOm 2012 for UCS Monitoring and Reporting purpose. Is there any detail configuration/Administrator Guide available?
Is there any best practice document availble to monitor critical ports( Network uplink/Storagre Uplink) ports and and setting up threshold limit?
Thanks in adavance for your help..

Hi Hetal,
Please take a look at this guide for starters:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/msft_tools/scom/scom_2.6/scom_2.6_user_guide/scom_2_6_monitoring.html
Thanks,
-Bruce

SCOM 2012 R2 Management Servers and SQL Server Availability Groups

My team is in the middle of rolling out a brand new install of System Center Operations Manager 2012 R2.
I have set up a SQL Server Availability group that is spread across multiple subnets and installed the initial management server per
here.
As I have gone through attaching new management servers, I have noticed disturbing behavior. When the AG fails over to another node, the management servers will lose connectivity unless I either recycle the service or it fails back to the original
node. This is not a security issue as I have set up permissions. It says it cannot connect to the database anymore at all.
Has anyone else seen this behavior? Is there a setting I am missing somewhere?
Thanks for your help.
Dale

Hi Dale,
What about ApplicationIntent\Readonly?
http://msdn.microsoft.com/en-us/library/hh205662(v=vs.110).aspx
Still thinking about DNS, may be this could be for your case:
http://www.sqlservercentral.com/Forums/Topic1449216-2799-1.aspx
Natalya

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

SCOM Connected Management Group to SCSM Connector not working

Hi
We have successfully connected 3 management groups using Connected Management Group . I can see the alerts from all the 3 MG in one console. I also configured SCSM connector and connected to the local Management where the other 2 are connected . I can successfully
forward the alerts from that MG which is registered in SCSM , but when I try to forward the alerts from the other 2 mg I get the below message on the respective Management servers . Is connected management group supported in SCSM . Or am I missing any step
need
Log Name:      Operations Manager
Source:        DataAccessLayer
Date:          11/4/2014 4:58:20 PM
Event ID:      33333
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      server
Description:
Data Access Layer rejected retry on SqlError:
Request: AlertUpdate -- (AlertId=c89b3ebc-2e45-47e9-a6d8-e96c05b787f3), (BaseManagedEntityId=9f8aa0d1-1b31-d133-e66a-a91830a42405), (ResolutionState=0), (Owner=), (CustomField1=), (CustomField2=), (CustomField3=), (CustomField4=), (CustomField5=), (CustomField6=),
(CustomField7=), (CustomField8=), (CustomField9=), (CustomField10=), (Comments=Alert modified by user), (TimeLastModified=10/14/2014 5:28:11 AM), (ModifiedBy=xx\xxxx), (TicketId=), (ConnectorId=a680dc76-2fc2-429d-b6dd-d1a851e9bd8f), (ModifyingConnectorId=),
(TfsWorkItemId=), (TfsWorkItemOwner=), (RETURN_VALUE=1)
Class: 16
Number: 547
Message: The UPDATE statement conflicted with the FOREIGN KEY constraint "FK_Alert_ConnectorId". The conflict occurred in database "OperationsManager", table "dbo.Connector", column 'ConnectorId'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="DataAccessLayer" />
    <EventID Qualifiers="32768">33333</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-05T00:58:20.000000000Z" />
    <EventRecordID>35534</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>server</Computer>
    <Security />
</System>
<EventData>
    <Data>AlertUpdate -- (AlertId=c89b3ebc-2e45-47e9-a6d8-e96c05b787f3), (BaseManagedEntityId=9f8aa0d1-1b31-d133-e66a-a91830a42405), (ResolutionState=0), (Owner=), (CustomField1=), (CustomField2=), (CustomField3=), (CustomField4=), (CustomField5=),
(CustomField6=), (CustomField7=), (CustomField8=), (CustomField9=), (CustomField10=), (Comments=Alert modified by user), (TimeLastModified=10/14/2014 5:28:11 AM), (ModifiedBy=FAREAST\v-sanaug), (TicketId=), (ConnectorId=a680dc76-2fc2-429d-b6dd-d1a851e9bd8f),
(ModifyingConnectorId=), (TfsWorkItemId=), (TfsWorkItemOwner=), (RETURN_VALUE=1)</Data>
    <Data>16</Data>
    <Data>547</Data>
    <Data>The UPDATE statement conflicted with the FOREIGN KEY constraint "FK_Alert_ConnectorId". The conflict occurred in database "OperationsManager", table "dbo.Connector", column 'ConnectorId'.</Data>
</EventData>
</Event>

For Fix error 33333, you can refer below links
http://opsmgradmin.blogspot.com/2011/05/scom-event-id-33333-in-scom-from-source.html
http://blogs.technet.com/b/smsandmom/archive/2008/03/13/opsmgr-2007-dataaccesslayer-event-id-33333-with-should-not-generate-data-about-this-managed-object.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Poweshell script for adding the computer object in to SCOM 2012 group.

Hi Team,
Is there any way to add the computer object ( csv file) to SCOM 2012 manually created group.

Hi,
In addition, hope the links below be helpful for you:
Creating and Updating Groups
http://blogs.msdn.com/b/jakuboleksy/archive/2006/11/15/creating-and-updating-groups.aspx
Programmatically Creating Groups
http://blogs.technet.com/b/brianwren/archive/2008/11/18/programmatically-creating-groups.aspx
Modifying Explicit Group Membership in SCOM 2012 with PowerShell
http://blogs.msdn.com/b/rslaten/archive/2013/06/27/modifying-explicit-group-membership-in-scom-2012-with-powershell.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

STEPS to Make SCOM 2012 SP1 High Avaliability

Can anybody tell me the steps to make scom 2012 sp1 high avaliabilty with sql server 2008 r2 because i have akready deplyed scom 2012 single server with sql server 2008 r2 but now i have to make the replica of this on dr side so should i need one more
sql server 2008 r2 and one MS server on DR site

Hi,
Additional to dktoa’s reply, I would like to explian Resource pools are a new concept in Operations Manager 2012. When two or more management servers are added to a management group, the management servers automatically become part of a resource pool and
work is spread across all the members included in it. If one of the resource pool management servers fails, other management servers in the resource pool take over the workload, thus delivering an out-of-box highly available design.
Topology changes in System Center 2012 Operations Manager (Overview)http://blogs.technet.com/b/momteam/archive/2011/08/22/topology-changes-in-system-center-2012-operations-manager-overview.aspx
Niki Han
TechNet Community Support

SCOM 2012 R2 Upgrade Plan Discussion

Dear Experts,
Currently I have a RMS and one MS Server with SCOM 2007 R2 in my Test Environment (Windows 2008 R2).
Now, The Upgradation plan is below and please correct me if I am wrong.
SCOM 2007 R2 CU4 --> SCOM 2012
SCOM 2012 --> SCOM 2012 SP1
SCOM 2012 SP1 --> SCOM 2012 R2.
So we need to purchase of three types of SCOM 2012 versions S/W or else we can simply download those versions from Microsoft ?
Please provide me the complete process of this Migration cycle.
Saravana Raja

Hi Saravana:
Upgrading to System Center 2012 – Operations Manager is supported from Operations Manager 2007 R2 CU4, or from the latest available CU. See
http://technet.microsoft.com/en-us/library/hh476934.aspx.
As for upgrading from SCOM 2012 to SCOM 2012 SP1 to SCOM 2012 R2, MVP Marnix Wolf is clear that you need to perform each upgrade step separately:
http://thoughtsonopsmgr.blogspot.com/2013/07/upgrade-paths-to-system-center-2012-r2.html. The "complete process" would consists of performing the upgrade for each version one after the other, again, just as you put in your plan.
You do not need to purchase any additional software, but you will need to download the 3 versions as you described from Microsoft volume license site or other media source.
John Joyner MVP-SC-CDM

Connected Management Groups

I'm currently reviewing a design that has multiple management groups (for scale), with a root management group containing
no agents or devices at all, but simply connecting to each of the other groups using CMG's.
It's my understanding that data does not traverse through CMG's. It simply allows a single unified view of the alert data of each CMG, so I'm confused as to why you would have this root MG, and all it's supporting infrastructure (OpsDB, DW DB etc)
when there's no agents at all.
Wouldn't you just have the other MG's (all containing agents) in a CMG configuration, i.e connecting to a single 'local MG' that also has agents.
Cheers,
E

Hi,
Connected management groups enable the consolidation of alerts and the running of tasks from multiple management groups. Tasks can be initiated from a local management group to run on managed objects of a connected management group. This scenario is used
to scale up the number of managed computers or objects you can monitor beyond the capabilities of a single management group.
The management group in which the data is consolidated is called the local management group, and those that contribute their data to the local management group are called the connected management groups. They relate to each other in a hierarchical fashion,
with connected groups reporting up to local groups. The connected groups are in a peer-to-peer relationship with each other. Each connected group has no visibility or interaction with the other connected groups; the visibility is strictly from the local management
group to the connected management group.
Deploying the Connected Management Groups Scenario
http://technet.microsoft.com/en-us/library/bb418761.aspx
Managing Connected Management Groups in Operations Manager 2007
http://technet.microsoft.com/en-us/library/cc540367.aspx
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 : Update rollup installation failed

Hello,
I'm trying to update SCOM 2012 SP1 with UR7 but the installation rollback automatically.
Same error with others UR.
LOG MSP :
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server - Update 'System Center 2012 - Operations Manager SP1 UR7 Update Patch' could not be installed. Error code 1603. Additional information is available in the log file c:\logs3.log.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer installed an update. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: System Center 2012 - Operations
Manager SP1 UR7 Update Patch. Installation success or error status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Note: 1: 1729
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server -- Configuration failed.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer reconfigured the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: Unable to delete the file. LastError = 32
MSI (c) (08:1C) [14:49:24:772]: Grabbed execution mutex.
MSI (c) (08:1C) [14:49:24:772]: Cleaning up uninstalled install packages, if any exist
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: MainEngineThread is returning 1603
=== Verbose logging stopped: 15/10/2014 14:49:24 ===
MOMPerfCtrsInstall.log
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The uninstall has completed.
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.InstallLog.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The uninstall has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Maybe someone have a idea about that ?
Thank you !
Jérémy

Hi,
Have your tried to review the c:\logs3.log for any potential error or indication of cause?
For more information, please review the link below:
Update Rollup 7 for System Center 2012 Operations Manager Service Pack 1
http://support.microsoft.com/kb/2965420
Update rollup packages for System Center 2012 Operations Manager
http://support.microsoft.com/kb/2906925
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 Single Management Group Supporting ?

Similar Messages

Maybe you are looking for