SCOM 2012 SMS Alert Notification

Hi,
I am using SCOM 2012 and I have a requirement of SMS Alert. but the issue that I am facing here is I have a Single Virtual Box for SCOM 2012, and what ever I experienced from SCOM 2007 physical was I had to configure a Modem through the USB device
few years back..
now I have to configure the SMS notification on a Virtual Box of SCOM 2012...
any idea ? what could be done ?
Regards, Owais

Hi,
I think you need to make the SMS modem work with the virtual machine first. Then, configure the notification in SCOM consol.
How to Enable a Text Message (SMS) Notification Channel
http://technet.microsoft.com/en-us/library/hh212811.aspx
Thanks.
Nicholas Li
TechNet Community Support

Similar Messages

  • SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

    Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers.  When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
    server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task".  The task disappears and there is no history to view.
    Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
    How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

    SCCM should use the following SCOM SDK to do that.
    http://msdn.microsoft.com/en-us/library/bb437532.aspx
    That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
    which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
    The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
    reflected in the OpsMgr console).
    Jason | http://blog.configmgrftw.com

  • SCOM 2012 E-mail Notifications

    I am monitoring router interfaces on SCOM.   One particular interface on the router we can only use the class of objects, Interface.
    On the dashboard I created, I can select a router and the description shows the MIB2 name for PATH.  I set up an e-mail notification.  In the e-mail notification it I used:
    $Data/Context/DataItem/ManagedEntityFullName$
    It returned the info below.
    System.NetworkManagement.NetworkAdapter:00-00-00-00-00-00;IF-adsl-012-251-001-042.sip.sdf.bellsouth.net/2
    The name "IF-adsl-012-251-001-042.sip.sdf.bellsouth.net/2" doesn't tell me which location is having an issue with their router.  The MIB2 name and "Interface Alias" (object in the class, Interface) is the only thing we
    can edit on router to describe location.
    I need a way to make $Data/Context/DataItem/ManagedEntityFullName$  show the MIB2 name or a way to place the object, Interface Alias, in the e-mail notification.
    Any help is appreciated.
    Thanks.

    Have you tried some of the variables found here?
    http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx

  • SCOM 2012 - Disk alerts

    Hi,
    I am getting some weird alerts on disk space like the one below which make no sense at all. I do see alerts for C:, D: etc but this type (below) make no sense.
    Can anyone interpret what SCOM is trying to report here? (And how to fix this).
    Thx very much,
    John Bradshaw
    The disk
    \\?\Volume{c3f603b0-d948-11e0-bfa8-806e6f6e6963} on computer MYSERVER is running out of disk space

    Since the latest windows OS MP, I believe so.  So maybe you guys recently imported the newest one?
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • SCOM 2012 R2 Alert Suppression

    Is there a way to build a set of rules around the Alert Suppression feature. For example if a custom alert is triggered more than 5 times in 10 minutes, I want to suppress that alert for the next hour.
    Is this possible?
    Paul Arbogast

    Hi,
    I understand that you want to enable alert suppression after alert is triggered 5 times in 10 minutes, I have to say that I don't think this can be done.
    As Alert suppression can only be enabled when the rule is created. You cannot enable alert suppression by using an override. So you should re-create the rule if you want to enable suppression.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCOM 2012 - Disable Alerts for a few servers

    Hi, 
    I have about 8 servers and i need to disbale a monitor, how do i do this?
    Is there a way i can select the monitor from the agent and then disable it?
    thank you in advance :)
    Kelly

    Find out what the "target" of the monitor is.  Create an instance group containing the target class for those servers.  If you can do this dynamically based on naming convention or OU, then cool.  If not, then you might have to
    add them individually.  Then override for a group, as the person said before.
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • SCOM 2012 Alerts for Ping Network Device

    Hi
    I have SCOM 2012 and configure Rule for Ping my Network Device.
    My question is, How to Configure Alert for send mail when timeout is detected on Rule?. Step by step documentation? I see tab Alerts on the monitor but Generate Alerts option is greyed out. 
     thanks.

    More info:
    How to test email notification settings in Operations Manager
    https://support.microsoft.com/kb/934756?wa=wsignin1.0
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • IM notifications not working SCOM 2012 R2

    Hi,
    We are using SCOM 2012 R2 and we are trying to send alerts notifications through IM Channel (Server = Lync 2010, Client - Lync 2013), but nothing is happening.
    Alerts are generated and notifications are sent by Email Channel, but not by IM Channel.
    The configuration of the IM Channel is:
    Protocol option: TCP
    Authentication Mehtod: NTLM
    IM port: 5060
    I also tried with this configuration:
    Protocol option: TLS
    Authentication Mehtod: NTLM
    IM port: 5061
    I created a run as account, which has a valid SIP address and correctly configured for Instant messaging.
    That account is a member of the Operations Manager Administrators role and it is set to be the Notification Account profile.
    I was wondering if there is any log files where I can see what is wrong exactly?
    Please let me know and thanks in advance!
    Thierry

    Hi,
    Check your configuration by following the steps below.
    http://blogs.technet.com/b/operationsmgr/archive/2009/04/15/configuring-im-notifications-in-system-center-operations-manager-2007.aspx
    I would also like to share a notification troubleshooting guide with you.
    http://blogs.technet.com/b/operationsmgr/archive/2010/08/11/alert-notification-troubleshooting-in-system-center-operations-manager-2007.aspx
    Wish it helps.
    Juke Chou
    TechNet Community Support

  • SCOM 2012 SP1 Notifications - Escalation

    Hi,
    I am looking to implement a tiered notification, with escalation..so for example..
    Initial alert hits Email Group
    Unresolved after 30 mins text sent to on call engineer
    Unresolved after a further 60 mins all engineers receive text
    Is this possible to configure in scom 2012 sp1?
    Thanks
    Gareth

    Hi,
    You can try this Process if still not done…
    We assume that you have created one Group in SCOM and added respective servers or devices into that group. (Explicit or dynamic member)
    We assume that for each level of notification you have created distribution list in
    AD or Exchange and added those DL in to SCOM Subscriber
    Also assume that mail delivery channel is created in SCOM
    Subscription 1: 
    In Condition, Select
    Raised by any instance in specific group and specify group name in Criteria
    Also you can specify
    severity, priority and resolution state
    –if required.
    Add Immediate Alert Subscriber’s Distribution list ( Ex:-
    Helpdesk Team DL)
    In Channels, select Email Channel which you create already also selects
    Send notifications without delay
    And Enable this notification subscription when finish.
    Subscription 2: 
    In Condition, Select
    Raised by any instance in specific group and specify group name in Criteria
    Also you can specify
    severity, priority and resolution state
    –if required.
    Add Call Engineers Distribution list ( Ex:-
    L1 Support Team DL)
    In Channels, select Email Channel which you create already also selects
    Delay sending notifications if conditions remain unchanged for longer than (in minutes) and specify the time as you mentioned 30 minutes
    And Enable this notification subscription when finish.
    Subscription 3: 
    In Condition, Select
    Raised by any instance in specific group and specify group name in Criteria
    Also you can specify
    severity, priority and resolution state
    –if required.
    Add All Engineers Distribution list ( Ex:-
    L2 Support Team DL)
    In Channels, select Email Channel which you create already also selects
    Delay sending notifications if conditions remain unchanged for longer than (in minutes) and specify the time as you mentioned 60 minutes
    And Enable this notification subscription when finish.
    All three subscriptions 
    severity, priority
    and resolution state should select the same if you specified otherwise no need to worry.
    Above steps will solve your query i think. 
    Thanks & Regards, Kesa_Kara

  • SCOM 2012 SP1 failed to send notifications by IM Channel

    Hello, I have a problem with my SCOM 2012 SP1. When it tries to send notification by IM Channel I get the following alert in SCOM:
    Notification subsystem failed to send notification using
    device/server 'live.august.ru:5060' over 'sip' protocol to
    'sip:[email protected]'.
    Microsoft.Rtc.Signaling.OperationFailureException: The GetInbandDataAsyncResult
    operation has failed with message: "The data session subscription to server
    failed.". See the InnerException and FailureReason properties as well as the
    logs for additional information. . Rule id:
    Subscription077dc311_59c0_4ba5_a432_072b486cd287
    At the same time the following event in the Application Event Log generates on the server with IM service:
    Event Type: Warning
    Event Source: Live Communications Server Authentication
    Event Category: (1003)
    Event ID: 16435
    User:  N/A
    Computer: LCS
    Description:
    At least one invalid authentication signature was detected.
    There were 2 messages with invalid signatures in the last 7112 minutes. The last one had the FROM header: sip:[email protected]
    Cause: This could be due to a client or server which is not handling authentication correctly, or it could be due to an attacker.
    Resolution:
    None needed unless the failure count is high (>100). Check your network for any rogue clients. Restart the server if problem persists.
    Notifications sent by the SMTP channel work fine!
    I Have the following Servers:
    LCS (live.august.ru) - Win 2003 EE SP2 + Live Communication Server 2005 SP1
    SCOM - Win 2012 + SCOM 2012 SP1
    Also I have a third server (Win 2003 + SCOM 2007 R2) and it sends notifications to the same VMLCS server successfully. The configurations of IM Channels are identical on both servers:
    IM server: live.august.ru
    Return address: sip:[email protected]
    Protocol option: TCP
    Authentication method: Kerberos
    IM port: 5060
    I tried to change the Authentication method to NTLM, and the port to 5061, but it doesn't help...

    Hi,
    Please refer to these following articles to configure IM channel correctly:
    How to Create and Configure the Notification Action Account
    http://technet.microsoft.com/en-us/library/hh212835.aspx
    How to Enable an Instant Message Notification Channel
    http://technet.microsoft.com/en-us/library/hh212690.aspx
    Enabling Instant Messaging Notifications in System Center 2012 Operations Manager
    http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/
    Alex Zhao
    TechNet Community Support

  • Email and sms alerts against Quality Notifications

    I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
    Regards
    Sudhir

    Hi,
    You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
    Thanks
    SUMIT

  • How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

    Hi,
    I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
    Serivce: Windows Management Instrumentation
    Service: Netlogon
    Service: Remote Procedure Call (RPC)
    Service: Server Service
    Service: Terminal Services
    Service: Windows Time
    Service: Workstation
    Service : WWW Publishing Service
    Could some one please assist or share me the details, how to configure these services for windows agent servers.
    Thanks..
    Regards, Rajeev Parambil

    Hi,
    A certain set of services are monitored by default on all agents:
    DNS Client
    DHCP Client
    RPC
    Workstation
    Server
    For all the other services you could create a service monitor.
    A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
    It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
    SCOM link blog

  • Only Alert Data is not being inserted in SCOM 2012 Data Warehouse database

    Hi All,
    Alert data is not getting inserted into SCOM Data Warehouse database since 10 days though I could see latest Performance data in DW DB.  No changes were made as far I know on SCOM servers or DB's. I had this issue few months back
    and got resolved by executing a qiery to create an entry for Data Warehouse Synchronisation server entry.
    Now I have checked the discovered inventory and could see an entry present and it is healthy. Still, latest Alert data is not getting inserted into DW DB. Please help me out.
    http://social.technet.microsoft.com/Forums/en-US/2dac4f45-4911-40dc-a220-702993188832/alert-data-is-not-present-in-scom-2012-data-warehouse-database-since-two-weeks?forum=operationsmanagergeneral
    Regards, Suresh

    Hi,
    Generally, data warehouse store a long-term data, and by default, it would keep 400 days data, I suggest check your configuration:
    How to Configure Grooming Settings for the Reporting Data Warehouse Database
    http://technet.microsoft.com/en-us/library/hh212806.aspx
    Alex Zhao
    TechNet Community Support

  • SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

    Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
    Single server, local SQL install, SQL Server 2012 SP1
    Hyper-V VM running on Server 2012.  VM has 8GB Ram, single vCPU
    Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
    See screenshot
    http://i.imgur.com/l0Molh1.png
    I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue.  I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
    Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
    The SCOM Console launches and responds fine, and I get no other errors.  I check the Data Access service and it is online.  I have left the system alone for a couple of hours and no other errors.  I then closed those alerts and restarted the
    server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
    Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
    Has anyone else come across this before?

    Please try the method in the following thread:
    Note: As there is operations related to Registry, please perform a backup before doing this.
    OpsMgr 2012 - Power Shell Script failed to run 
    http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
    Thanks.
    Nicholas Li
    TechNet Community Support

  • Alert data is not present in SCOM 2012 Data Warehouse database since two weeks

    Alert data is not present in SCOM 2012 Data Warehouse database since a week though I could see Performance data for the latest dates. Old Alert data is present but I think the latest Alert data is not being inserted to Data warehouse. No activity was done
    on the day from where we are missing data.
    I could see 31554 events on all my Management servers and this proves that Data Insertion is happening. I am not sure why only Alert data is missing (or not getting inserted) in DW database. I am trying to use SQL queries to fetch the data as I dont have reporting
    currently. The same query is working for other dates, so there is no issue with this query.
    I have noticed that I could see the Alert Data present in SCOM OperationsmNager Db but NOT present in OperationsManagerDW database.
    In SCOM 2007, data will be inserted in both Ops DB and DW simultaneously. I believe the same methodology in 2012 too.
    Please help me to fetch Alert data from DW. Any suggestion pls?
    Regards, Suresh

    Hi,
    Generally, data warehouse store a long-term data, and by default, it would keep 400 days data, I suggest check your configuration:
    How to Configure Grooming Settings for the Reporting Data Warehouse Database
    http://technet.microsoft.com/en-us/library/hh212806.aspx
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • How do I install and use Photoshop actions

    I downloaded a zipped file with actions.  I've left the file zipped until I learn how to install the actions in Photoshop CC.  Any help will be appreciated.

  • How to stop this forum from sending me email?

    I've only posted on 1 thread once... and now, I can't stop the flow of emails from the thread that I commented! I've already selected "No" on all the items in my preference but I still get an email from the same topic/thread I've commented. Talk abou

  • When i click on item in xsltlistviewwebpart.ribbon get disabled

    Hi, I have a scenerio where I need to enable a delete option [in listitem inside a ribbon], on click of an item in a listview webpart. I am administrator of the site but for few records I am unable to see "delete button." Image attached below. So, I

  • Causes for main memory to be unloaded - BIA Server is overloaded

    The check on our BIA server is showing "BIA Server is overloaded". The details indicate that the main memory was unloaded >900 times in the last 24 hours. I am not aware of any special activities taking place - what would be the cause of the main mem

  • Blog layouts not displaying

    Good day to all and thank you for your time, We are unable to get the blog layouts rendering accordingly, it seems to be a conflict with BC css and our own CSS. Nevertheless, was  hoping if anyone might have ideas in into helping us resolve this issu