SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012?  Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices.  We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue.  I made sure they were set to SNMP only.  I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from.  Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process.  We have tried having SNMP installed, but disabled, installed and running, and uninstalled.  Currently we have the SNMP service installed and running.  The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server.  I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator.  I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor.  We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule.  The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices.  No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

Similar Messages

  • Tinymce - does anyone have it working in cfform?

    Downloaded today. successfully works <form> but not
    <cfform>.... can anyone help?????

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,
    Yog Li
    TechNet Community Support
    How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
    People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

  • Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

    I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
    Please don't post any spam links :/
    Thanks!

    download the installation files and properly install your apps.
    you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Does anyone have bluetooth working? [solved]

    I can't believe this. For months I can't even use a bluetooth mouse!
    Once working fine, then there appeared to be a bluez issue, so I got the latest release 4.40
    got my /var/lib/bluetooth/MAC/trusts file and finally had my mouse back until...
    after a few minutes it lost the connection and refuses to reconnect.
    Now kbluetooth won't start, that is, it doesn't appear and says it's already running!
    I've tried blueman but that wants to pair the mouse with a passkey.
    So if anyone has a working kbluetooth please post the configuration here.
    Many thanks!
    Last edited by subatomic (2009-06-28 14:46:16)

    I had the same problem, my bluetooth mouse stop working when I upgraded to bluez 4.x
        $hidd --connect xx:xx:xx:xx:xx:xx --server
    is deprecated and documentation about bluez ActivateService is not working with bluez4.x:
        $dbus-send --system --print-reply --dest=org.bluez /org/bluez org.bluez.Manager.DefaultAdapter
        Error org.freedesktop.DBus.Error.UnknownMethod: Method "DefaultAdapter" with signature "" on interface "org.bluez.Manager" doesn't exist
    Google suggest me to install d-feet and look into dbus to correct the python scripts and finally I got my bt mouse back again.
    bt_mouse_create.py:
        import dbus
        bus = dbus.SystemBus()
        manager = dbus.Interface(bus.get_object('org.bluez', '/'), 'org.bluez.Manager')
        adapterpath = manager.DefaultAdapter()
        adapter = dbus.Interface(bus.get_object('org.bluez', adapterpath), 'org.bluez.Adapter')
        devicepath = adapter.CreateDevice('xx:xx:xx:xx:xx:xx')
        print devicepath
    Replace xx with your mouse's mac
    Run once and take note about the output string.
    Replace it in the next script.
    bt_mouse_connect.py:
        import dbus
        bus = dbus.SystemBus()
        devicepath='/org/bluez/7077/hci0/dev_xx_xx_xx_xx_xx_xx'
        device = dbus.Interface(bus.get_object('org.bluez', devicepath), 'org.bluez.Input')
        device.Connect()
    I Hope it works for you too.

  • Does anyone have SSL working with the Sun Java System App Server PE?

    We have been having problems (to say the least) getting SSL to work with the Sun Java Application Server 8.1 Platform Edition.
    We have a signed certificate from VeriSign and have it imported correctly, but when you test it by going to https://localhost:8182/ (note that 8182 is the port set up for SSL) you get a warning mesage saying that the certificate cannot be verified. When you view the certificate you see that it is the one that got automatically generated for you by the app server and not the one we purchased from VeriSign.
    So, I was just wondering if anyone out there has gotten this to work and if so, what document did you follow to tell yoiu how it was done!
    THANK YOU!

    once apon a time i had a real problem with the same issue.. best of luck.. i forget now how to fix.. sorry.

  • Netgear Readyshare Print - Does Anyone Have this Working?

    I have a WNDR4500 router with Netgear Readyshare facilities.
    It's supposed to offer easy network printing with a USB printer attached.
    I've been unable so far to get a USB printer to work.
    The supplied Netgear USB Control Center utility installs fine into Lion.  It detects and displays the printer.  However I do not know how to set up the printer on Lion.  I tried defining a printer queue using IP printing to default queue on the routers IP address.  This gets as far as showing me a print queue but all attempts to print result in the printer busy error.

    Same here. On both Mac and Windows I can't seem to get printing to my Canon MP600 to work. I filed a support ticket to Netgear...to be continued

  • Does anyone have Trash working with OD users?

    I think it is a general Dock issue but OD users are not seeing Having trouble with their Dock trash. You move files in and they either just dissapear (not in the Trashcan) but they are in the .Trash folder or they show up in the Trashcan but you can't empty the Trash.
    I have tried fixing it using 10.6 where the trash works fine with the user accounts.
    I thought it was an issue from my Server setup so I set up a brand new Mac mini wwith a fresh and clean Lion Server install and set up one test OD user and it has the same issue!
    Lately too some users who have their Downloads folder in the Dock are seeing their system lock up when Safari completes a download and the Dock icon changes. The Dock will take up 100% of the CPU and force quitting it will cause EVERYTHING to lock up with and nessisitating a force reboot.
    I was hoping 10.7.1 and 10.7.2 updates and then 10.7.2 combo updates would fix the issue not no it is still there.
    Between this and OD users seeing beachballs 30-60 seconds every time they open a document is a program that supports auto-save and versioning I am ready to migrate everyone back to 10.6 and start looking at Linux server alternatives for the future.

    Yeah, even the Secure Empty Trash workaround can sometimes have issues.
    I tried wih user homes stored locally and on an external drive. The only way I could get it to work is by creating a user and NOT setting a network home, then the trash would work. Makes me think it is a weird permissions issue on the client-end since 10.6 users work fine and no matter how the system sets or I set permissions on the Users directory I still end up with Trash and other issues.
    Between this and the beach-balling with auto-save/versioning enabled apps my Lion users are not happy campers.

  • Does anyone have GIMP working *properly* with Leopard?

    If so, how did you get it working? It is killing me that I can't use GIMP for the time being.

    I rarely use GIMP, but I did launch and run it in Leopard just to see if it would, and it did. I opened an image, cropped it, inverted colors, added a new layer, changed the mode of interacting between the layers, and resaved as a psd file. Everything seemed to be working fine. I just copied over the last version I had in Tiger and double clicked it. X11 launched, then a slight pause, the GIMP splash screen appeared, did its loading, and it was up and running. The Tiger version I copied was GIMP-2.4-rc3-intel, which I had downloaded a month or so ago.
    Francine
    Francine
    Schwieder

  • Does anyone have an applet that runs on Windows CE and connects via jdbc to lite DB

    I am trying to get an applet to connect to the Oracle lite DB
    I use
         if (conn == null)
         // Load the JDBC driver
    Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
         conn = DriverManager.getConnection ("jdbc:polite:polite", "SYSTEM", "MANAGER");
         output.appendText ("Connected\n");
    but CE just echos oracle.lite.poljdbc.POLJDBCDriver and does not connect.
    Does anyone have any working samples? I am using Jeode JVM on the CE device

    We have the same problem with that platform, but we get a
    java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.oljdbc40)
    exception.
    Thank you in advance.

  • Does anyone have an idea of how to create custom gestures in DPS?

    Have any of you heard if Adobe will be allowing custom gestures (2-4 finger, different directions, unique movements, etc.) in the DPS InDesign software?  Or, does anyone have a work around for integrating custom gestures.  Here's an example, slide shows swiping that is triggered off an top to bottom gesture vs. side-to-side.  Thanks much you guys!-

    I created hours, minutes and seconds in three separate layers and lined them up to look like a digital readout (09:07:58PM) For the seconds, I typed in 59, 58, 57 and so on with a hard return after each. Then I keyframed the Y position of that layer to stay static for 1 second, and then increase over the course of 1 to bring up the next number. Then in Keyframe Editor, I chose After Last Keyframe>Progressive. The clock now counts down second by second. You could do the same for minutes and hours if your clock is on screen that long.

  • Epson 2200 on MacBook Pro - Anyone have that working?

    I'd like to run an Epson r2200 printer (I know it's old) with a MacBook Pro. Epson says the driver does not support Intel-based Macs, and they have no plans to update the driver. I've tried the GIMP driver, and it does not work. Does anyone have one working with an MBP (or any other Intel-based machine), and if so, how did you do it?
    MacBook Pro   Mac OS X (10.4.6)  

    What is an R2200? I'm familiar with the Stylus Photo 2200. The 2200 has intel drivers on the epson site:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14402&prodoid=20306147&infoType=Downloads&platform=Macintosh
    If this isn't what you're looking for then I'm not sure what the printer is.

  • Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

    Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

    Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

  • My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections.  I've reset it to factory settings twice and its not clearing it.  Does anyone have any ideas??

    My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections.  I've reset it to factory settings twice and its not clearing it.  Does anyone have any ideas?? 

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

Maybe you are looking for