SCOM 2012 SP1 Integration with Qlikview

Hi ,
can anyone help me with information on how to integrate SCOM 2012 Sp1 and Qlikview ?
Any pointers or documentation will be greatly appreciated.
Thank you,

Hi,
I recommend you go to Qlik Community to find if there have a solution.
Welcome to Qlik Community
http://community.qlik.com/welcome
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party
contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

SCOM 2012 R2 Integration with Lync Server 2013

Hi,
I am trying to configure SCOM 2012 R2 to work with Lync server 2013 standard edition. I have successfully installed and tested Lync Server 2013. But the problem is, I never worked on SCOM application before and I can not find any easy documents online. So
could you please help me and suggest any step by step guide for the same purpose!
BR,
Ajit

Hi,
Glad to hear that you have solved the issue. For the second question, what did you want to do with the Windows Server (anything to do with Lync Server)? As it is another question, you can also post another case on Technet forum and more engineers will help
you solve the issue.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?

Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support

SCOM 2012 SP1 - SCVMM 2012 SP1 Integration

Hi All,
I need to integrate SCOM 2012 SP1 (without UR)with SCVMM 2012 SP1(without UR).
Is Update Rollup required for this integration as a prerequisites? or We can directly proceed with Integration without update Rollup. Please advice.
Can we get performance date of virtual machine by integration scom with scvmm?
Thanks and Regards
Karthick M

Hi,
To monitor virtual machines in VMM, we should integrate VMM with SCOM, please go through the article below:
How to Connect VMM with Operations Manager
https://technet.microsoft.com/en-us/library/hh882396.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

Windows 2012 upgrade plan to R2 hosted with SCOM 2012 SP1

Dear Experts,
Currently we are hosting SCOM 2012 SP1 on Windows 2012 Operating System and the Server team plan to upgrade Windows server OS 2012 to Windows OS 2012 R2.
So, Is there any Potential road blocks and things to take care for SCOM 2012 SP1 if we want to upgrade the Windows 2012 R2 OS.
Thanks,
Saravana
Saravana Raja

Hi,
I have seen this a couple of times without any issues.
Just make sure you backup all SCOM related (databases if local, management packs etc).
www.coretech.dk - blog.coretech.dk

SCOM 2012 SP1 Can't get email alerts for Heartbeat Failure or Computer Unreachable when combined with Group.

Hello,
I have SCOM 2012 SP1 RTM POC lab. I have created a dynamic group that picks up my system center servers based on some simple criteria and this works fine.
I have set up a subscription for critical and high severity alerts originating from this dynamic group called SCOM Servers to send emails to a distribution. This also worked well for any critical alert that was NOT Heartbeat Failure or Computer Unreachable.
I see those in the console but no email.
So I set up a new subscription by right clicking on the alerts and here's the kicker. If add no other conditions to these subscriptions, they will send emails to the DL I provided, but if add the condition initiating from group, and specify my dynamic
group SCOM servers, no email alert. But the alert still appears in the console.
Any ideas on this? I would like the appropriate support groups to get these types of alerts for the servers that they support (i.e. SCOM will get SCOM servers, Exchange Admin will get Exchange and never the two roads shall meet.).
I even tried some internet posted custom management pack, but I couldn't import it after adding the code that he listed.
I mean, isn't this a basic requirement for any mid-sized company?
Any help is greatly appreciated.

Hi Donald,
Like Dan says you need to add the "Health Service Watcher" objects to the groups as wel. Unfortunately this cannot be done in the Dynamic group Editor but has to be done in the XML. Export the XML and add the following piece of code between the
lines </MembershipRule></MembershipRules>:
<MembershipRule>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7084300!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
<Contains>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
      <Expression>
<Contained>
<MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7084300!Microsoft.Windows.Computer"]$</MonitoringClass>
          <Expression>
            <Contained>
              <MonitoringClass>$Target/Id$</MonitoringClass>
            </Contained>
          </Expression>
        </Contained>
      </Expression>
    </Contains>
</Expression>
</MembershipRule>
Save the XML delete the old one in OpsMgr and import the edited.
For SP1 the SystemLibrary version is 7.0.8430.0. If this is not your version you need to edit this in the code above.
Hope this helps,
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

SCOM 2012 Sp1 Cu4 Web Console issue logging

Hi I am having an Issue with the SCOM 2012 sp1 Cu4 Web console,
When logon to the web console its Says Singing IN,
And the loops on Initializing....
after a while I get this error,
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
System.TimeoutException: [HttpRequestTimedOutWithoutDetail]
Arguments:
http://localhost/OperationsManager/Services/DataAccessService.svc
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem.
See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.ServiceModel.dll&Key=HttpRequestTimedOutWithoutDetail ---> System.Net.WebException ---> System.Net.WebException
   at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
   --- End of inner exception stack trace ---
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String methodName, Object[] args, IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result)
   at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)
I found that the only way to fix it previously was to completely remove IIS from the server and reinstall everything connecting to the Web Console, so far its not the best way to go as I keep getting this error after 2 days,
Can anyone tell me how I would even go about diagnosing this?
Kind Regards

Got the same issue again with Update Release 2 for R2,
then found this blog, but it did not help me, only guided me in a direction
http://thoughtsonopsmgr.blogspot.com/2013/12/quick-fix-register-aspnet-40-with-iis.html
What help me was to re-add the svc-integrated-4.0 by copying and pasting the info it, same with the ScriptModule-4.0.
Don't know why that worked for me but this is a funny issue,
I also don't recommend doing this, as it only worked for me.

SCOM 2012 SP1 availability report in MS Generic Report Libary shows inaccurate data

Hi,
in SCOM 2012 sp1, we have the generic availability report showing many of our web sites with no up time beyond a certain date. The web sites are ok, the web availability monitors are all healthy and the monitors test ok
None of these web availability tests are in Maintenance mode although what we are observing certainly makes us think that they are.
We also have a Web transaction login monitor for WEBSITE(A) that does not show this same outage for a login test.
However WEBSITE(A)'s availability monitor shows the same downtime as the other web availability tests.
Any thoughts on where to look for this problem? Im guessing its a problem placing the data in the Warehouse?
Thanks Lance

Hi,
Based on my understanding, the report shows there is downtime for the web site, but the web site did work well always.
It seems like that there is old data stored in data warehouse, would you please check the report for recent date, such as one day or two days.
Regards,
Yan Li
Regards, Yan Li

Issue upgrading SCOM 2012 SP1 to SCOM 2012 R2

I have been having a really fun time trying to get my test SCOM 2012 SP1 environment upgraded to SCOM 2012 R2. I initially had an issue with the DB server not accepting connections to SMB which was causing the upgrade to fail stating database permission
issues (that was a fun one to troubleshoot). Once I figured out that problem I am now getting an error in the OpsMgrSetupWizard log that is stating the following:
[14:46:47]: Always:
:LaunchMsiSetup: Complete: 2 seconds
[14:46:47]: Error:
:LaunchMsiSetup: Failed, return code: 1612
[14:46:47]: Error:
:Error:Failed to uninstall previous MOM product on this machine, cannot proceed with upgrade
[14:46:47]: Error:
:Error:Failed to uninstall Operations Manager Agent on this machine. This is fatal error, we cannot proceed with upgrade
[14:46:50]: Error:
:LaunchMSI: MSI E:\Setup\AMD64\Server\OMServer.msi returned error 1603
[14:46:50]: Error:
:ProcessInstalls: Install Item Management Server failed to install. We did not launch the post process delegate.
In the application log I am getting the following error:
"Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service
Manager is already installed. These must be uninstalled to proceed."
I have verified that I don't have any of these installed and have even gone so far as to remove my Config man agent and System Center Endpoint Protection just in case it was getting confused with System Center Essentials.
I am at a loss as to what to try next. Any suggestions?

Hi,
Check if you have the following registry. If so, please back it up first, then delete for a test.
HKEY_CLASSES_ROOT\Installer\UpgradeCodes\C96403E8AD6025B4F9E1FE9C574E34AE
Also, please uninstall MOM product and Operations Manager Agent manually to check the result.
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn249707.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Three agent UR versions gets installed from gateway - SCOM 2012 SP1 UR4

Hi,
We have a SCOM 2012 SP1 UR4 installation with several gateways that servers connect to and get installation from.
We noticed that when the agent get installed on a client server it gets first the agent itself, then UR1, UR2 and last UR4.
From the XML-section in the task that has installed the agent one can read the following:
SoftwareUpdateInstalled KB2784734-amd64-Agent.msp;KB2826664-amd64-Agent.msp;KB2880799-amd64-Agent.msp; SoftwareUpdateInstalled
Below is from the application log of a newly installed server that got the agent installed.
The question I have is if this is correct? Why are all three UR installed?
Shouldn't it be enough with the latest version of UR? Are they not cumulative?
Can I simply delete the older versions in the agent directory of the Gateway?
Regards S-E
Windows Installer installed the product. Product Name: System Center 2012 - Operations Manager Agent.
Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
Installation success or error status: 0.
Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
Update Name: System Center 2012 - Operations Manager SP1 UR1 Update Patch.
Installation success or error status: 0.
Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
Update Name: System Center 2012 - Operations Manager SP1 UR2 Update Patch.
Installation success or error status: 0.
Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
Update Name: System Center 2012 - Operations Manager SP1 UR4 Update Patch.
Installation success or error status: 0.
Windows Installer installed the product. Product Name: Active Directory Management Pack Helper Object.
Product Version: 1.1.0. Product Language: 1033. Manufacturer: Microsoft Corporation.
Installation success or error status: 0.

Hi,
This should be normal, as we can see in the below two articles. When applying Update Rollup 2, UR1 is listed there, and when applying Update Rollup 3, UR1 and UR2 is listed there also.
http://blogs.technet.com/b/kevinholman/archive/2013/04/11/applying-update-rollup-2-ur2-to-opsmgr-2012-sp1.aspx
http://blogs.technet.com/b/kevinholman/archive/2013/09/27/applying-update-rollup-3-ur3-to-opsmgr-2012-sp1.aspx
For example, UR3 can be applied to System Center Operations Manager 2012 SP1 (as released) or a SCOM 2012 SP1 deployment that has had UR1 or UR2 already applied.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 Integration with Qlikview

Similar Messages

Maybe you are looking for