SCOM 2012 SP1 - Trying to import Unix / Linux Management packs - need help

Hello all, I am using SCOM 2012 SP1. I am trying to install the following management packs for Unix/Linux:
http://www.microsoft.com/en-us/download/details.aspx?id=29696
When I try to do so, it says that I'm missing some dependent management packs. Two main ones it looks like:
Microsoft.SystemCenter.WSManagement.Library - Version 7.1.10000.0
Microsoft.SystemCenter.OperationsManager.Library - Version 7.1.10000.0
However, I cannot figure out where to get these two other management packs from. I've been googling for an hour now and I'm starting to go in loops. Can anyone give me any suggestions on how to get this updated version of these two management
packs listed above please?

For Microsoft.SystemCenter.WSManagement.Library , you can check below link
http://www.microsoft.com/en-us/download/details.aspx?id=29266
For Microsoft.SystemCenter.OperationsManager.Library, it's already deployed with SCOM installation
http://technet.microsoft.com/en-us/library/hh212701.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical
That link for WS Management looks like its the "Microsoft.SystemCenter.OutofBand.SMASH.Library" management pack. It does not appear to be "Microsoft.SystemCenter.WSManagement.Library"
Also, about the "Microsoft.SystemCenter.OperationsManager.Library" one, I do have a version of that in my SCOM already. It appears to be version 7.0.9538.0 though. Apparently theres a version 7.1.10000.0 out there somewhere, based on what I saw
in the messages above when attempting to import the Unix/Linux MPs. I don't know how to update this management pack. I tried searching the catalog for "Microsoft System Center Operations Manager Library" but that didn't find any results.
So I still do not have either of the versions I need of either management packs.

Similar Messages

SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

Hi all!
What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
Thank you very much for your time and attention!
Best regards!

Hi,
Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
See: http://jurelab.wordpress.com/ for details.
Hope it helps
Jure

SCOM 2012 view Override Thresholds which relate to Management Packs

Hi there,
Is it possible to manually view SCOM Overrides thresholds, I'd rather not run powershell scripts in our live environment.
Is there a possibility to view these Overrides thresholds relating to the MPs.
Thanks
Richard

Hi
You can use override explorer tool to get details of override.
http://blogs.msdn.com/b/dmuscett/archive/2012/02/19/boris-s-tools-updated.aspx
regards
sridhar v

MonitoringHost.exe RAM usage SCOM 2012 SP1 UR1

Hello,
From two days the MonitoringHost.exe use more than 6 go ram on two of my four management servers. After some research I found that these two servers are member of my UNIX/Linux Monitoring Resource Pool. And when I delete on these management server
of this resource pool the process return to the normal with 500 mo of ram usage.
I have 11 UNIX/Linux computers for the moment composed by 5 SunOS 5.10, 4 SLES 10 and 2 SLES 11. I have only imported MP for these versions. I think that the problem come of a rule in on of these management pack but I don't know how to investigate and find
the source of problem.
Any help would be welcome.

You should apply the latest Update Rollup 2 for System Center 2012 SP1 Operations Manager. It contains quite a few updates to SCOM itself, plus it contains new cross platform Management Packs. Cross platform monitoring works in proxy,meaning
the Management Server resource pool or Management Server that you appoint to monitor the workloads truly does a lot of work. I would recommend, and so does Microsoft, having a dedicated resource pool of Management Servers to perform the monitoring for
cross platform systems.
In addition to this the most important resource to a Management Server is RAM. I'm not sure the scale of your environment and your current configuration (physical vs virtual) but I would highly recommended scaling your Management Servers a little higher
in RAM to accommodate console sessions, dashboards creation and viewing etc. You can even scale out now with the nice architecture changes to SCOM 2012. If you start to use dashboards in your environment that will chew through a ton of
RAM which Microsoft design recommendations don't currently account for.
http://support.microsoft.com/kb/2802159?wa=wsignin1.0

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?

Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support

SCOM 2012 SP1 Can't get email alerts for Heartbeat Failure or Computer Unreachable when combined with Group.

Hello,
I have SCOM 2012 SP1 RTM POC lab. I have created a dynamic group that picks up my system center servers based on some simple criteria and this works fine.
I have set up a subscription for critical and high severity alerts originating from this dynamic group called SCOM Servers to send emails to a distribution. This also worked well for any critical alert that was NOT Heartbeat Failure or Computer Unreachable.
I see those in the console but no email.
So I set up a new subscription by right clicking on the alerts and here's the kicker. If add no other conditions to these subscriptions, they will send emails to the DL I provided, but if add the condition initiating from group, and specify my dynamic
group SCOM servers, no email alert. But the alert still appears in the console.
Any ideas on this? I would like the appropriate support groups to get these types of alerts for the servers that they support (i.e. SCOM will get SCOM servers, Exchange Admin will get Exchange and never the two roads shall meet.).
I even tried some internet posted custom management pack, but I couldn't import it after adding the code that he listed.
I mean, isn't this a basic requirement for any mid-sized company?
Any help is greatly appreciated.

Hi Donald,
Like Dan says you need to add the "Health Service Watcher" objects to the groups as wel. Unfortunately this cannot be done in the Dynamic group Editor but has to be done in the XML. Export the XML and add the following piece of code between the
lines </MembershipRule></MembershipRules>:
<MembershipRule>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7084300!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
<Contains>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
      <Expression>
<Contained>
<MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7084300!Microsoft.Windows.Computer"]$</MonitoringClass>
          <Expression>
            <Contained>
              <MonitoringClass>$Target/Id$</MonitoringClass>
            </Contained>
          </Expression>
        </Contained>
      </Expression>
    </Contains>
</Expression>
</MembershipRule>
Save the XML delete the old one in OpsMgr and import the edited.
For SP1 the SystemLibrary version is 7.0.8430.0. If this is not your version you need to edit this in the code above.
Hope this helps,
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

Issue upgrading SCOM 2012 SP1 to SCOM 2012 R2

I have been having a really fun time trying to get my test SCOM 2012 SP1 environment upgraded to SCOM 2012 R2. I initially had an issue with the DB server not accepting connections to SMB which was causing the upgrade to fail stating database permission
issues (that was a fun one to troubleshoot). Once I figured out that problem I am now getting an error in the OpsMgrSetupWizard log that is stating the following:
[14:46:47]: Always:
:LaunchMsiSetup: Complete: 2 seconds
[14:46:47]: Error:
:LaunchMsiSetup: Failed, return code: 1612
[14:46:47]: Error:
:Error:Failed to uninstall previous MOM product on this machine, cannot proceed with upgrade
[14:46:47]: Error:
:Error:Failed to uninstall Operations Manager Agent on this machine. This is fatal error, we cannot proceed with upgrade
[14:46:50]: Error:
:LaunchMSI: MSI E:\Setup\AMD64\Server\OMServer.msi returned error 1603
[14:46:50]: Error:
:ProcessInstalls: Install Item Management Server failed to install. We did not launch the post process delegate.
In the application log I am getting the following error:
"Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service
Manager is already installed. These must be uninstalled to proceed."
I have verified that I don't have any of these installed and have even gone so far as to remove my Config man agent and System Center Endpoint Protection just in case it was getting confused with System Center Essentials.
I am at a loss as to what to try next. Any suggestions?

Hi,
Check if you have the following registry. If so, please back it up first, then delete for a test.
HKEY_CLASSES_ROOT\Installer\UpgradeCodes\C96403E8AD6025B4F9E1FE9C574E34AE
Also, please uninstall MOM product and Operations Manager Agent manually to check the result.
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn249707.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

SCOM 2012 SP1 Report Timed out

Hi All,
My large reports are timing out after 30 minutes in SCOM 2012 SP1, with the error: The Operation has timed out
I'm trying to run the Performance Detail report from Microsoft Generic Report Library against Windows Server 2008 Operating System group (1400 servers) for last 1 year for Percent memory used. I can run the same report for Windows Server 2012 Operating System
group (200 servers) sucecssfully.
I've already verified and configured the reporting services for reports to not time out.
http://www.systemcentercentral.com/forums-archive/topic/scom-reports-large-reports-time-out/
http://anoopcnair.com/2011/07/20/configmgr-sccm-sql-server-reporting-service-timeout-expired/
Any suggestions?
Thanks,
Harry
Thanks, Harry :-)

Hi There,
Based on my knowledge, When ever a SQL query is ran against any database the query output is executed and stored in TempDB and then it is shown to your SSMS or reporting application.
So i would suggest you check the size of the temp SQLDB and see if auto growth is enabled for that and does your drive as well have enough space to hold that temp DB in its local drive if the DB grows its self.
As querying 1 years data for 1400 servers is a huge data and requires lot of time and space.
I had a similar issue here, Look here:
https://social.technet.microsoft.com/Forums/en-US/6420f4e1-fc21-49c9-8fed-eddbe6cecabf/my-sql-server-seems-to-be-creating-huge-tempdbmdf-file-post-database-migration?forum=sqlservermigration
Gautam.75801

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

Bulk URL Monitoring is SCOM 2012 SP1

Hey Team,
i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure how to resolve
it.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.BulkUrlManager.BulkUrlManagerForm..ctor()
at Microsoft.EnterpriseManagement.BulkUrlManager.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Any suggestions will be highly appreciated.
-vrkumar01
RajKumar

It worked.
intially i tried to install in \System Center 2012\Operations Manager\Setup & System Center 2012\Operations Manager\Server both failed but this
System Center 2012\Operations Manager\Console worked.
thanks a lot
-vrkumar01
RajKumar

Error 1723 when removing scom 2012 sp1 agent

Hi All,
I am trying to remove the scom 2012 SP1 agent from a machine and i get an error - 'Error 1723. There is a problem
with this Windows Installer package. A DLL required for this install to complete could not be run.
Any idea how can i remove the agent from the box. Let me now if any other info required to give a hint to the problem.
Durgesh Kumar

Hi,
Reinstall the agent, and the uninstall ? If possible, reboot the server and then uninstall?
Same issue here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/get-error-1723-there-is-a-problem-with-windows/3d68fc4b-c968-4796-a270-27027a52de3f?page=2
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM 2012 SP1 Integration with Qlikview

Hi ,
can anyone help me with information on how to integrate SCOM 2012 Sp1 and Qlikview ?
Any pointers or documentation will be greatly appreciated.
Thank you,

Hi,
I recommend you go to Qlik Community to find if there have a solution.
Welcome to Qlik Community
http://community.qlik.com/welcome
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party
contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 SP1 - Trying to import Unix / Linux Management packs - need help

Similar Messages

Maybe you are looking for