SCOM 2012 SP1 Web Transaction Monitoring with Login test.

Hi,
we setup a web transaction monitor test and did the full recording. The web site is one that accepts an active directory account for login. We also setup a runas account that is a valid account for the site and configured NTLM in the settings
for authetication and set this runas account.
The test does not fail. However when we change the runas account password to force a failure, we dont get a failure on the website login test but instead a runas account verfication failure from SCOM.
How can we configure the web transaction monitor to properly login during the test? Any guidance would be appreciated.
Thanks Lance

So back to the original topic of the thread.
We setup another test on a site that uses basic authentication. We setup the web transaction test to use a login on a initial site that transfers to a second site. We recorded this entire test and saved. It seems to work as it gives
no errors.
However when we change the Runas account's credentials, which means it CANT login to the site, it still runs fine with no errors.
This tells me it is not really logging in but just seeing the http status code is less than 400.
What am I doing wrong.
Thanks Lance

Similar Messages

SCOM 2012 SP1 Web Console High Availability Configuration

We are a large children's hospital, with many ancillary units that we are trying to get to help monitor their servers/devices/applications through the SCOM web console. Due to the number of connections we have two standalone web console servers. The
entire environment is running on Windows Server 2012 Standard Edition servers, and we are running SCOM 2012 SP1 UR3. When accessing the web console directly via the FQDN of the server, everything works great. We have an HLB virtual IP and DNS entry
(SCOM.domain.com), which works flawlessly when access the default IIS website. However, when accessing the web console URL (http://SCOM.domain.com/OperationManagerdown) Negotiate:Kerberos, NTLM, Negotiate. I believe the issue lies in the fact that
the Application Pools are running under the ApplicationPoolIdentity identity, and the HTTP SPN's are using the machine account. We have tried changing the identity of the application pools to a domain account (the SDK service account), and modified the
SPN's so the HTTP SPNs are assigned to the domain account. We also created SPNs for the HLB VIP DNS alias. But to no avail. While we realize that Microsoft does not support load balancing of the web console, there has to be a way to make
it work. We will have more than 50 connections, so using one web console server is not an option, and asking our users to use two different URLs is not very user friendly. If anyone has any suggestions or had any success, please let me know.
Any help is greatly appreciated!

Is switching to forms based authentication an option? The extra login might be considered a pain however, but forms plus SSL is the only successful LM configuration we have worked with. We use F5s.
Sign Up Now for the Infinity Connected™ Full Feature 30 Day Trial
Visit the Infinity Connected™ Support Center
Visit Our Website: http://www.infinityconnected.com
Visit Our Blog: http://blog.mobieus.com
Want to just talk shop? 1-800-691-6774 / [email protected]
Monitoring Information Center | Infinity On-Line | [email protected]

SCOM 2012 SP1 Web Console not filtering "Items by Text Search"

I have the weirdest issue with not one, but two installations of SCOM 2012 (SP1) specific to the Web-based Console. I have to think that it's something that I've messed up since each installation (separate domains, separate environments) is exhibiting
the exact same behavior and that I cannot find a single mention by anyone else experiencing this problem anywhere on the 'net.
The problem I'm encountering is that when I try to filter the list of objects using the "Look for: Items by text Search" option, the list doesn't filter! It's just the *weirdest* thing!
For example, I go into "Microsoft Windows Server; Performance" and select "Disk Capacity". The view loads just fine with two panes up top, and the object list down below. I select a pane to display the list of objects which
gives me all the servers discovered/managed by SCOM. I changed the "Look for:" drop-down from "All Items" to "Items by Text Search" which makes the text field (to the right) active. I enter my text string and........
nothing happens. When I hit "Enter" the pane simply refreshes. The "Reset" button doesn't become active further reinforcing the fact that something just ain't right.
I have a installation of SCOM 2007 R2 and this feature works flawlessly.
Anyone have any idea as to what I may have missed or what I might do to resolve this issue? Again, I've found absolutely nothing on the Internet specific to this issue (unless my search criteria is woefully flawed) which suggests that I've messed something
up.
Thank you in advance for your time!
-Todd
PS - this feature works just fine in the installed/thick client/console.

Unfortunately, I never did receive an answer to this issue/post, and I never found a solution with this version of SCOM.
I did, however, just test this functionality on the SCOM 2012 R2 installation and discovered that the "Items by text search" filter in the web console *does* work as one would expect. So, if you're able, upgrade to SCOM 2012 R2 and you should
be much happier with the result. (I think I'm running Cumulative Update #2, if that helps.)
Hope this helps!
-Todd

SCOM 2012 SP1 "Task invocation failed with error code -2146232576"

Hi,
I`m trying to discover a Linux RHEL 5.9 Server which is in another untrusted domain and from the Discovery wizard I receive the following error:
Task invocation failed with error code -2146232576. Error message was 0x80131700.
Any ideas ?
Greetings.

Hi,
@Simon, I restart the SCOM services and I also verify the UAC and it's disabled.
@Mai Ali, thank you for you reply. I don't have a "&" symbol in my password, but only a "$" ..I hope it's fine.
If the SCOM discovery doesn't work, I installed the agent manually on the Linux server.
BTW I also use a "monuser" account configured using this procedure:
http://social.technet.microsoft.com/wiki/contents/articles/7375.configuring-sudo-elevation-for-unix-and-linux-monitoring-with-system-center-2012-operations-manager.aspx
I also verify the ports 22 and 5723 and are opened, but I also noticed that if you restart the scxadmin, is listening on HTTPS on port 1207.
Now..if I try to re-discover the Linux server from SCOM, I receive the following error:
"The pool managing the instance is not available or the location monitoring object cannot be found"
Regards.

Some of the SQL Server 2012 are not getting monitored in SCOM 2012 SP1.( basics monitoring is happening, expect SQL role)

Found that all the SQL servers are getting monitored, expect few servers which are having SQL server 2012 role.
proxy is enabled for these servers, when I checked discovered inventory for SQL 2012 database unable to find these servers in that list.
and other servers having SQL Server 2012 monitoring properly issue is with only few servers.

Hi,
thanks for the all the input, we are using service account as windows account instead of action account !!
will that also affect discovery of SQL role?
and also found that there are many alerts in SCOM console, with alert description :
SQL Server cannot authenticate using Kerberos because the Service Principal Name
(SPN) is missing, misplaced, or duplicated.
please let me know how we can resolve this issue, will it affect SQL discovery as well ?

SCOM 2012 SP1 - Setup SNMP monitoring = ping OK, no response SNMP.

Hello,
I've tried the snmp monitoring in lab domain, everthing work. Now I work in the production environment, but I can't make work the snmp. I've tried only snmp, but the same error occure. The Ping is ok, all my firewalls rules allows snmp and ping over
the domain.
But when I launche the discovery, I've got an error after "No Response SNMP". I've analized the network with wireshark, I see the snmp get send to scom to the network device, but the netowrk device, reply " Destionation unreachable (Port unreachable)".
I've check with "netstat -ano -p udp" but I don't see the port 162, the 161 is open and snmp.exe service use it. But 162 is not open and Healthservice.exe doesn't use it.
I tried to reboot the server, but nothing change. And I check all my configuration, and it's the same in my lab domain and te production.
Anybody have the same issue? Or a workaround?
Thank you in advance.
KimBaxZ

Hello Roger,
1. Windows Firewall
a. SNMP service authorized
b. SNMP trap not authorized
c. PING.exe authorized
d. HealthService.exe authorized
2. SNMP service configuration
a. Security => Community name + Right OK
b. Security => Accept SNMP packets from any host
3. SNMP trap service disabled
4. The network device (cisco switch is already configured and the snmp work well)
a. It's possible to execute a snmp walk on the switch, and we get all the data (we use a différents
computer to do this, like a linux server on the same network)
5. We use snmp v2 on the switch, and during the discovery scom, send v2c snmp get to the switch with the good community name.
6. I tried to forge a snmp v2 packet and send them to the scom server, wireshark see the packet
During the discovery the switch get the snmp request, but he can't reply, the snmp trap port (162) on the scom server is not open. And I don't know why.

SCOM 2012 SP1 - Automating alert ownsership with command channel notification: the command keeps executing

Hello everyone,
here is the context: one of my client wants that, when a SCOM operator changes the resolution state of an alert to a specific resolution state "XYZ", the alert's ownership is automatically set to this user's AD Account.
What I did:
a PoSh script that takes the alert ID as a parameter, extracts the user ID from the alert's history - get-scomalerthistory - and sets the alert's owner field with this ID - set-scomalert -owner.
a command channel running the script
a subscription that triggers for alert with the specific resolution state "XYZ"
It works great the first time - when the user sets the alert to XYZ state. Problems come right after this as it seems that modifying the alert in anyway - via GUI or script - will trigger the subscription once again.
So, in fact, I need the subscription to trigger only when the alert CHANGES its resolution state to XYZ.
Does anyone have an idea about this ?
Reagrds,
P. Augras

Hi, it's predictable behavior as your script updates the alert property but alert property matches criteria specified. So one of methods is to change the resolution state in script to another state, something like XYZProcessed.

SCOM 2012 sp1 AD Replication monitoring.

Hello! How to add obects (domain controllers) for wathcing data from this monitors (Replication monitoring)? Thank you!

Hi
As far I can tell from your screenshot, you are looking to get data for the replication Performance views. There is a detailed step by step guide in the Active Directory management pack guide
http://www.microsoft.com/en-us/download/details.aspx?id=21357 on page 23. It is an optional configuration. Follow the MP guide...
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

Hello everybody,
Sorry for my english, I write normaly in french, but we have more result in english.
I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
I creat a specific management pack juste for the rule and the views.
SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
SNMP Service (Windows service) => Disabled
SNMP trap (Windows service) => Disabled
Health Service (Windows service) => Enabled
Port 162 UDP => Open and listenning by the MonitoringHost.exe
Firewall rules => Everythinks is OK
SNMP Trap send version is => 2c
SNMP Monitoring device version is => 2c
I try too many of solution on different web site like :
http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
http://technet.microsoft.com/en-us/library/hh563870.aspx
http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
Thank you in advance.
KimBaxZ
Computer expert system technology

Hello Yan Li,
I read your link, and I found this :
The network devices must be discovered and registered as ICMPSNMP devices.
And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
Have a nice day
Best regards
KimBAxZ
Computer expert system technology

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

Bulk URL Monitoring is SCOM 2012 SP1

Hey Team,
i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure how to resolve
it.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.BulkUrlManager.BulkUrlManagerForm..ctor()
at Microsoft.EnterpriseManagement.BulkUrlManager.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Any suggestions will be highly appreciated.
-vrkumar01
RajKumar

It worked.
intially i tried to install in \System Center 2012\Operations Manager\Setup & System Center 2012\Operations Manager\Server both failed but this
System Center 2012\Operations Manager\Console worked.
thanks a lot
-vrkumar01
RajKumar

SCOM 2012 Sp1 Cu4 Web Console issue logging

Hi I am having an Issue with the SCOM 2012 sp1 Cu4 Web console,
When logon to the web console its Says Singing IN,
And the loops on Initializing....
after a while I get this error,
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
System.TimeoutException: [HttpRequestTimedOutWithoutDetail]
Arguments:
http://localhost/OperationsManager/Services/DataAccessService.svc
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem.
See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.ServiceModel.dll&Key=HttpRequestTimedOutWithoutDetail ---> System.Net.WebException ---> System.Net.WebException
   at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
   --- End of inner exception stack trace ---
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String methodName, Object[] args, IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result)
   at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)
I found that the only way to fix it previously was to completely remove IIS from the server and reinstall everything connecting to the Web Console, so far its not the best way to go as I keep getting this error after 2 days,
Can anyone tell me how I would even go about diagnosing this?
Kind Regards

Got the same issue again with Update Release 2 for R2,
then found this blog, but it did not help me, only guided me in a direction
http://thoughtsonopsmgr.blogspot.com/2013/12/quick-fix-register-aspnet-40-with-iis.html
What help me was to re-add the svc-integrated-4.0 by copying and pasting the info it, same with the ScriptModule-4.0.
Don't know why that worked for me but this is a funny issue,
I also don't recommend doing this, as it only worked for me.

SCOM 2012 SP1/R2 Monitoring of IBM Bladecenter doesn´t work

We tried the IBM Hardware Management Pack 4.0 and 4.5 and configured everything according to the guide. The Bladecenter is discovered correctly but we dont get any health data or Module Information. It´s almost the same as in this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ceda483b-9500-4831-869c-4b3d0f178924/cant-get-scom-2012-sp1-to-monitor-ibm-bladecenter?forum=operationsmanagerdeployment
But this problem was resolved through rediscovering the Bladecenter with SNMP v1 or v2 instead of v3 which we did right from the start. We had this Problem with SCOM 2012 SP1 and IBM HMP 4.0/4.5. Since then we upgraded to SCOM 2012 R2 and IBM HMP 4.5 and
ist still the same issue. Everything else works fine like the Hardware Management Packs for various IBM Storage etc...
Thank you.

Hi,
Do you mean the issue is gone after you rediscover the blade center with SNMP v1 and v2? If so, I will record this.
Juke Chou
TechNet Community Support

SCOM 2012 SP1 Upgrade - RMS fine but can't upgrade reporting or web console

Hi,
We've just upgraded our RMS to SCOM 2012 SP1 and everything went smoothly as per the documentation. However when I next try to upgrade the Reporting or Web Consoles (located on separate servers) to SP1 I am presented with a message saying:
"The management server to which this component reports has not been upgraded".
At that point we cannot proceed past the prerequisite checker.
I am totally confident that the SP1 upgrade went through on the RMS and all file versions are at SP1.
Can anyone help please?
Thanks,
Tim

Hi Retee,
I was not able to find a fix for this but I did find a workaround.
1. I copied the installation files from the SCOM 2012 SP1 DVD/ISO to a folder, SCOM_2012_INSTALL on the reporting server.
2. Browsed to the following folder ..\SCOM_2012_INSTALL\setup\AMD64\ and commented out the following section of the IntermilestoneUpgradePrereqs.xml file:

3. Ran ..\SCOM_2012_INSTALL\setup.exe and the upgrade was successful.
Our SCOM infrastructure has now been at 2012 R2 for a couple of months and I have not seen any issues caused by commenting out this section. But as always, use at your own risk.
Hope this helps.
Thanks,
Iain

SCOM 2012 SP1 Web Transaction Monitoring with Login test.

Similar Messages

Maybe you are looking for