SCOM 2012 SP1 - Windows operating system is not monitored in a SCOM agent

Hi All,
I have an agent with windows 2012 operating system that i am trying to monitor.
At the "Windows computers" view the "Windows operating system" column is empty ("Agent" column is Healthy).
Why SCOM doesn't recognized that the agent have operating system?
Please help.
Thanks.
TechNet

Hi,
On workgroup servers, you have to make sure you've used the momcertimport tool to import the certificate into the SCOM service.
In addition, I would like to suggest you go through the below article to monitor non-domain servers with SCOM:
Monitoring non-domain members with OM 2012
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • SCOM 2012 SP1 SQL Server 2008 R2 Clustering Monitoring?

    We have a new print management system that was setup using SQL server 2008 R2 clustering.  Right now we have SQL MP (monitoring)(discover) 6.3.173.1.  They had a failover occur a week ago and SCOM didnt throw any alerts.  As a temporary
    fix, I found some correlated events and setup a monitor for those events on the servers.  However, the system owner wants to know if there is a MP that will monitor for a SQL cluster failover event.  I have looked and looked and cant seem to find
    anything that gives a whole lot of detail on this.
    Thanks
    EFD
    Warm Fuzzies!

    Yes, you can monitor SQL Cluster 2008 using SCOM 2012 SP1. but you need to install SQL MP and Windows Cluster MP and Enable proxy Agent on physical nodes.
    You can refer below link {it's same for SCOM 2012}
    http://blogs.technet.com/b/birojitn/archive/2010/04/14/sql-server-2008-cluster-monitoring.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Prestaged OSD using SCCM 2012 SP1 windows Partition variable is not being set

    Hello All  I need some assistance with a workaround.
    I am using a presaged task sequence created from a working network / PXE deployment TS for windows 7.
    This TS sets a variable for the OS partition called "Windows" and the value is set in the Partition Disk task.
    Problem is this value is not being read from a prestaged due to the OEMMedia condition skipping this partition and format task.
    Question is how do I get it to read and or set the value for that partition?
    From what I have found on Google this was an issue in beta of MDT but was fixed in RTM.  I am not using MDT TS but I do have it installed. Any idea if this is a known issue with SCCM 2012 sp1 TS? 
    Edit: also noticed that the variable's case is different and will not let me change it.
    Variable under format is "windows"  variable under Apply OS is "Windows"  when I change them to be the same then close and reopen they revert back to the above.  Are these variables case sensitive?
    Edit: for now I have changed it from variable to next available partition.  I tested it twice so far it seems to be using the correct partition and it remains to be called the C drive.  For now this will be my solution.

    When you say "presaged task sequence created from a working network / PXE deployment TS" are you saying this is still a network boot process? Or have you done "Create Task Sequence Media"?
    Dustin Estes - MCP
    yes when i say prestaged that is using the create task sequence media then selecting prestaged.

  • SCOM 2012 SP1 exchange edge transport queue is showing as not monitored state.

    Hi,
    We have exchange servers which is being monitored by both SCOM 2007 and SCOM2012 SP1, in SCOM 2007 R2 exchange edge queue is getting discovered, but in SCOM 2012 SP1 it is showing as not monitored state.
    Please help me in resolving this issue.

    Hi,
    What kind of MP did you import on SCOM 2012? Meanwhile, please try the following suggestions.
    1. Start the Remote Registry service. 
    2. Enable File and Printer Sharing 
    3. Check the network connectivity between the management server and the Exchange Server and ensure the FQDN of the Exchange Server can be resolved. 
    4. Clear the HealthService queue on the Exchange Server:
    a. Stop System Center Management service.
    b. Go to C:\Program Files\System Center Operations Manager 2007\, and rename the “Health Service State” folder.
    c. Restart System Center Management service.
    Niki Han
    TechNet Community Support

  • Windows Operating System "Not Monitored"

    Hi, I have seen multiple posts regarding this, and I have tried many things without luck. I thought I'd contribute what helped me. Funnily, I actually fixed the problem while posting my question. But I thought this may be useful to anyone else with the same
    issue.
    We have SCOM 2012 7.0.8560.0
    We have the Windows Server Operating System MP installed, 6.0.7061.0
    3 servers are reporting that the Windows Operating System is "Not Monitored".
    The 3 servers which are not being monitored all appear to be Windows Server 2012 R2 operating system.
    What we've tried
    Uninstall SCOM agent from the SCOM console. Remove SCOM agent folder. Reboot. Reinstall SCOM Agent from SCOM Console (push install). install completes successfully.
    Enable Proxy Discovery
    Reboot SCOM Servers
    Ensured the SCOM service account has Admin rights on the server
    Disabled Windows Firewall
    Set User Account Control to minimum
    Verified DNS (DNS functions 100% in our environment, with scavenging every 7 days)
    SCOM Database Grooming runs every 7 days
    The problem has existed for weeks\months, so this is not a DNS or Database grooming issue (unless there is something lingering in the database?)
    Re-Ran the "download SCOM Management Packs" from the console - all MP's are up to date
    After reading through the release notes of the Windows Server Management Pack, I searched my discovery rules to perhaps see if we had disabled the Server 2012 discoveries, or something careless like that. To my amazement,
    there we NO Windows Server 2012 R2 Discoveries present in our environment! This confused me greatly, since we are running the latest version of the Windows Server management pack.
    For some reason, it appears that updating your MP's from the console wizard does not pull this down.
    After manually downloading
    the Windows Server Operating System management pack, and installing it manually, everything started to work.
    I'm not sure why the SCOM wizard doesn't do this, but this has kept me busy for days, for something so easily missed.
    I suggest MS enhances the SCOM "update MP" downloads to pull down an entire management pack if it says it was "imported successfully". I now wonder what else I think it "up to date", which may have rules missing without
    my knowledge.
    Cheers

    Hi,
    It is really nice of you to share this, this will help others who encounter the same issue.
    And as far as I know, we need to manually download the Windows opearting system management pack to management group, then we can monitor windows operating system:
    http://www.microsoft.com/en-hk/download/details.aspx?id=9296
    Regards,
    Yan Li
    Regards, Yan Li

  • SCOM 2012 SP1 is failing to install - SQL not compatible

    I'm getting an error when installing SCOM 2012 SP1 stating the SQL is not supported. I have seen a few posts on the forum about this error message but so far none of the resolutions resolved my issue.
    Using named instance on port 2433.  Entering SQL\instance and port 2433 yields same message as seen in another post:
    "The installed version of SQL server is not supported.  Verify that the computer and installed version of SQL Server meet the minimum requirements for installation.  Please see the Supported Configurations document for further information."
    I noticed I get this in my OpsMgrSetupWizard.log
    [15:03:28]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [15:03:28]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    Notice the last line - IsSQLOnAValidComputer is null/empty.  The solutions I found are to open the ports between these servers but the SQL server and SCOM server are on the same network - no firewall between them.  The registry key for domain firewall
    policy to 'EnableFirewall' is 0.  The firewall service is disabled on both machines.
    I am running the installation as a domain service account - for the DAA.  It has local admin on the SQL and SCOM server.  It has sysadmin DB access to the instance.
    SCOM Server:
    Server 2008 R2 Standard SP1
    SQL Server:
    Server 2008 R2 Enterprise SP1 | SQL 2012 RM 64-bit version 11.0.2100.60
    Any help is greatly appreciated.

    Glad to hear the issue has been resolved. Thanks for the update.
    Niki Han
    TechNet Community Support

  • Windows Operating System not being monitored

    I have installed some of the management packs (advanced workflow module events, event log provider events, performance monitor porvider events, registry provider events, script and powershell provider events, service monitoring events, vmi provider events) and
    there are no overrides.  I still cannot get the windows operating system to get monitored.  I have restarted the server and still none of the windows operating systems are being monitored.  Is there a certian management pack that i need to install
    for the monitoring Windows Operating Systems.  

    dktoa is correct, just because you have the Agents installed does not mean that anything is actually being monitored. In fact, all that will be monitored is the Agent itself being able to communicate with the Management Server. 
    However, I would suggest to ensure that all of your Agents are reporting back as Healthy (aka green), before you import any Management Packs. That way any issues that may occur can be directly linked (and thus troubleshooted) to the MP.
    Additionally, you have not mentioned what Windows OS you are trying to monitor. More than likely it is a Server OS; in which DKTOA has provided the link for the Windows Server Operating System Management Pack. 
    However, if in case it is a client-based Windows OS (i.e. XP, Vista, 7) than that Management Pack can be found here: http://www.microsoft.com/en-us/download/details.aspx?id=15700.
    You should note, that there currently is no Management Pack for Windows 8; though it is due out soon.

  • SCOM 2012 SP1 failed to send notifications by IM Channel

    Hello, I have a problem with my SCOM 2012 SP1. When it tries to send notification by IM Channel I get the following alert in SCOM:
    Notification subsystem failed to send notification using
    device/server 'live.august.ru:5060' over 'sip' protocol to
    'sip:[email protected]'.
    Microsoft.Rtc.Signaling.OperationFailureException: The GetInbandDataAsyncResult
    operation has failed with message: "The data session subscription to server
    failed.". See the InnerException and FailureReason properties as well as the
    logs for additional information. . Rule id:
    Subscription077dc311_59c0_4ba5_a432_072b486cd287
    At the same time the following event in the Application Event Log generates on the server with IM service:
    Event Type: Warning
    Event Source: Live Communications Server Authentication
    Event Category: (1003)
    Event ID: 16435
    User:  N/A
    Computer: LCS
    Description:
    At least one invalid authentication signature was detected.
    There were 2 messages with invalid signatures in the last 7112 minutes. The last one had the FROM header: sip:[email protected]
    Cause: This could be due to a client or server which is not handling authentication correctly, or it could be due to an attacker.
    Resolution:
    None needed unless the failure count is high (>100). Check your network for any rogue clients. Restart the server if problem persists.
    Notifications sent by the SMTP channel work fine!
    I Have the following Servers:
    LCS (live.august.ru) - Win 2003 EE SP2 + Live Communication Server 2005 SP1
    SCOM - Win 2012 + SCOM 2012 SP1
    Also I have a third server (Win 2003 + SCOM 2007 R2) and it sends notifications to the same VMLCS server successfully. The configurations of IM Channels are identical on both servers:
    IM server: live.august.ru
    Return address: sip:[email protected]
    Protocol option: TCP
    Authentication method: Kerberos
    IM port: 5060
    I tried to change the Authentication method to NTLM, and the port to 5061, but it doesn't help...

    Hi,
    Please refer to these following articles to configure IM channel correctly:
    How to Create and Configure the Notification Action Account
    http://technet.microsoft.com/en-us/library/hh212835.aspx
    How to Enable an Instant Message Notification Channel
    http://technet.microsoft.com/en-us/library/hh212690.aspx
    Enabling Instant Messaging Notifications in System Center 2012 Operations Manager
    http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/
    Alex Zhao
    TechNet Community Support

  • Mssql collation conflict while update scom 2012 sp1 to r2

    hi all
    i have scom 2012 sp1 (windows server2008 r2), mssql 2012 sp1 (windows server2008 r2)
    while updating scom 2012 sp1 to r2 error is appears:
    "DB operations failed with SQL error 468: Cannot resolve the collation conflict between "Cyrillic_General_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation."
    how can i change collation of db "OperationsManager" from "Cyrillic_General_CI_AS" to "SQL_Latin1_General_CP1_CI_AS"?
    thanks in advance

    For Failed to store data in the Data Warehouse. Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation, you can refer below link
    http://thoughtsonopsmgr.blogspot.com/2010/04/failed-to-store-data-in-data-warehouse.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Rebuilding/Reseting the SCOM 2012 SP1 Data Warehouse. What is the easiest way and what steps i have to perform

    Hello guys,
    What are the best steps to rebuild the data warehouse ? In SCOM 2012 SP1 it is build during the initial installation and SCOM it is not giving you a tool to rebuild it. I have tried to create one DW database using the Data Warehouse Initial Setup.sql file
    from the installation dvd and copied the permissions from my original DW. Although the sql script executed successfully i found some missing tables in the newly created database. So I'm not sure whether if i detach the old DW and rename the new test database
    to OperatonsMangerDW it will work. Please advice on this issue. Please let me know if there is any easier approach of rebuilding/resetting the Data Warehouse database.

    Hi,
    I would like to suggest you refer to the below link to move the data warehouse database to a different system:
    How to Move the Data Warehouse Database
    http://technet.microsoft.com/en-us/library/hh268492.aspx
    In addition, here is a similar thread, please refer to it:
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/c8e17cba-ad59-4474-9c90-787e4dec1307/create-operationsmanagerdw-manually?forum=operationsmanagergeneral
    Regards,
    Yan Li
    Regards, Yan Li

  • System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

    hi all,
    I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
    in Hyper-0S 2012 cluster.
    Now, System centre data access service get crashed again and again with mentioned events
    event 26339, OpsMgr SDKService
    event 26380, opsmgr SDkService
    An exception was thrown while initializing the service container.
    Exception message: Initialize
    Full exception: HTTP could not register URL
    http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
    The System Center Data Access service failed due to an unhandled exception. 
    The service will attempt to restart.
    Exception:
    System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
    because it is being used by another process
       at System.Net.HttpListener.AddAllPrefixes()
       at System.Net.HttpListener.Start()
       at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
       --- End of inner exception stack trace ---
       at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
       at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
       at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
       at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    Kirpal Singh

    Hi Kirpal
    Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
    The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
    Microsoft.Mom.Sdk.ServiceHost.exe.config
    Microsoft.Mom.ConfigServiceHost.exe.config
    In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
    <generatePublisherEvidence enabled="false"/>
    This solution disables CRL checking for the specified execute-ables, permanently.

  • Windows 2012 upgrade plan to R2 hosted with SCOM 2012 SP1

    Dear Experts,
    Currently we are hosting SCOM 2012 SP1 on Windows 2012 Operating System and the Server team plan to upgrade Windows server OS 2012 to Windows OS 2012 R2. 
    So, Is there any Potential road blocks and things to take care for SCOM 2012 SP1 if we want to upgrade the Windows 2012 R2 OS.
    Thanks,
    Saravana
    Saravana Raja

    Hi,
    I have seen this a couple of times without any issues.
    Just make sure you backup all SCOM related (databases if local, management packs etc).
    www.coretech.dk - blog.coretech.dk

  • SCOM 2012 SP1 Web Console not filtering "Items by Text Search"

    I have the weirdest issue with not one, but two installations of SCOM 2012 (SP1) specific to the Web-based Console.  I have to think that it's something that I've messed up since each installation (separate domains, separate environments) is exhibiting
    the exact same behavior and that I cannot find a single mention by anyone else experiencing this problem anywhere on the 'net.
    The problem I'm encountering is that when I try to filter the list of objects using the "Look for: Items by text Search" option, the list doesn't filter! It's just the *weirdest* thing!
    For example, I go into "Microsoft Windows Server; Performance" and select "Disk Capacity".  The view loads just fine with two panes up top, and the object list down below.  I select a pane to display the list of objects which
    gives me all the servers discovered/managed by SCOM.  I changed the "Look for:" drop-down from "All Items" to "Items by Text Search" which makes the text field (to the right) active.  I enter my text string and........ 
    nothing happens.  When I hit "Enter" the pane simply refreshes.  The "Reset" button doesn't become active further reinforcing the fact that something just ain't right.
    I have a installation of SCOM 2007 R2 and this feature works flawlessly.
    Anyone have any idea as to what I may have missed or what I might do to resolve this issue?  Again, I've found absolutely nothing on the Internet specific to this issue (unless my search criteria is woefully flawed) which suggests that I've messed something
    up.
    Thank you in advance for your time!
    -Todd
    PS - this feature works just fine in the installed/thick client/console.

    Unfortunately, I never did receive an answer to this issue/post, and I never found a solution with this version of SCOM.
    I did, however, just test this functionality on the SCOM 2012 R2 installation and discovered that the "Items by text search" filter in the web console *does* work as one would expect.  So, if you're able, upgrade to SCOM 2012 R2 and you should
    be much happier with the result.  (I think I'm running Cumulative Update #2, if that helps.)
    Hope this helps!
    -Todd

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Maybe you are looking for