SCOM 2012 unable to monitor SNMP traps

After installing SCOM 2012 I did not
get the SNMP Trap. I tried the solution
of the topics http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/6826f6a6-bbc3-444b-9b18-288d7fedac3e Nothing
has helped.
Help please, why SCOM can
not take Traps?

We had the an issue where device was sending SNMP v1 traps as per Wireshark but the device was discovered as a SNMP v2 device. We forced the device to be discovered as a SNMP v1 device and that worked.
To do so, after you add the device that needs to be discovered within the discovery rule, export the MP called Network Discovery Internal. Open this in notepad and browse to the IP address of your device that needs to be discovered. Change the value for
"AutoDetect" to v1 in case you want to discover his as a V1 DEVICE. Then you will be able to receive traps from the said device that got discovered.
<SeedSystem>
                  <SeedIPorName>10.100.x.x</SeedIPorName>
                  <Version>AUTODETECT</Version>
                  <SNMPPort>161</SNMPPort>
                </SeedSystem>
Hope this helps.
Kapil Dham

Similar Messages

SCOM 2012 unable to monitor servers

I have build a SCOM 2012 POC, post sql & SCOM installation am not able to monitor any servers.
I have added servers for agent monitoring. I had tried importing few management packs also. but i dont servers in the any monitoring alerts views. i have waited for 2 or 3 days too but unable to see any servers.
Please suggest me what are the must have management packs for SCOM 2012 for windows 2008 and 2012 monitoring.
Do we need to patch or install any hotfix for this to work am not sure..
Any help would be appreciated.
Thank you,
ndraj

1) check whether those server is under scom monitoring: operations console --> administration worksace --> Device Management --> Agent Managed --> whether you see your server is under this view and its health state is healthy(Green check mark)
2) monitoring Windows Server 2008 and 2012: you should download
System Center Managment pack for Windows Server Operatng System, its current version is 6.0.7061.0.
3) Run as account: specify credentials for specific computers
4) Run as profile: When a workflow requires rights and privileges that the default action account cannot provide, the workflow can be written to use a Run As profile. A Run As profile can have multiple Run As accounts associated with it.
http://technet.microsoft.com/en-us/library/hh212714.aspx
Roger

SCOM 2012 SP1/R2 Monitoring of IBM Bladecenter doesn´t work

We tried the IBM Hardware Management Pack 4.0 and 4.5 and configured everything according to the guide. The Bladecenter is discovered correctly but we dont get any health data or Module Information. It´s almost the same as in this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ceda483b-9500-4831-869c-4b3d0f178924/cant-get-scom-2012-sp1-to-monitor-ibm-bladecenter?forum=operationsmanagerdeployment
But this problem was resolved through rediscovering the Bladecenter with SNMP v1 or v2 instead of v3 which we did right from the start. We had this Problem with SCOM 2012 SP1 and IBM HMP 4.0/4.5. Since then we upgraded to SCOM 2012 R2 and IBM HMP 4.5 and
ist still the same issue. Everything else works fine like the Hardware Management Packs for various IBM Storage etc...
Thank you.

Hi,
Do you mean the issue is gone after you rediscover the blade center with SNMP v1 and v2? If so, I will record this.
Juke Chou
TechNet Community Support

Monitoring SNMP Traps from Windows Server

Hello All
im looking for a way to monitor an application that runs with os windows server 2003 and windows 2008 r2 and send its alarms as a snmp traps with system center operations maanger 2012 R2.
in the scom 2007 environment i could discover the servers as network device and recive traps and genrate alerts.
is there a way to edit the existing management pack to enable the windows server discovery as a network device
and enable traps with a microsoft oid to be resived ?
i understand that this is by desigin from
http://technet.microsoft.com/en-us/library/hh212935.aspx
or is there another option to create this monitor with scom 2012 R2?
Thank you

Hello Yan.
thank you for the replay i understand that this is by design,
what im looking for is a way to edit the management pack that discard those OID
or even a 3rd part solution to monitor windoes server snmp genrated alerts.
thank you

Operations Manager 2012 doesn't listening SNMP Trap UDP port 162

hi,
SCOM 2012 SP1, how come the operations manager started but the SNMP Trap UDP port 162 not listening?
Without this port listening, I can't testing SNMP trap on SCOM.
Thanks...KEN

Hi,
As described in the following blog, the TRAP service should be installed but turned off, we could not get traps coming in until we turned the service back on.
So please verify if the service is on. You can continue audit the ports by running netstat –a.
System Center 2012 Notes From the Field
http://scom-2012.blogspot.in/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.

CCMS agents, alert monitoring, SNMP traps

Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
Venky

Hi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu

Scom 2012 can't Monitor SQL server2012

i can't get alerts related to SQL Server 2012 in scom 2012 but i install management pack and applied it.

1)Please check whether SQL server is discovered by SCOM. You can use Monitoring workspace --> Microsoft SQL Server --> Computers to check
2) Make sure that the following action account has required right SQL discovery Account, SQL default action Account and SQL monitoring Account
For detail, please refer to
http://blogs.technet.com/b/kevinholman/archive/2013/10/24/opsmgr-sql-mp-version-6-4-1-0-capabilities-and-configuration.aspx
Roger

Cmd to Monitor SNMP traps 8.1

can anyone tell me the command to monitor or recevie the traps in 8.1
as the command for 10.3 is the below
java weblogic.diagnostics.snmp.cmdline.Manager SnmpTrapMonitor -p
do we have command for 8.1 wls please let me know

We had the an issue where device was sending SNMP v1 traps as per Wireshark but the device was discovered as a SNMP v2 device. We forced the device to be discovered as a SNMP v1 device and that worked.
To do so, after you add the device that needs to be discovered within the discovery rule, export the MP called Network Discovery Internal. Open this in notepad and browse to the IP address of your device that needs to be discovered. Change the value for
"AutoDetect" to v1 in case you want to discover his as a V1 DEVICE. Then you will be able to receive traps from the said device that got discovered.
<SeedSystem>
                  <SeedIPorName>10.100.x.x</SeedIPorName>
                  <Version>AUTODETECT</Version>
                  <SNMPPort>161</SNMPPort>
                </SeedSystem>
Hope this helps.
Kapil Dham

SCOM 2012: MP to monitor Certificate expiration

Did you know if there is a Management Pack to monitor Certificate expiration.
I would like to create a Mail Notification alert 1 month before the certificate expire.
Thanks a lot for your help.
Regards,
-Misch-

Hi,
Yes, there is
PKI Certificate Verification Management Pack
http://thoughtsonopsmgr.blogspot.dk/2009/09/pki-certificate-verification-management.html
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

Hello everybody,
Sorry for my english, I write normaly in french, but we have more result in english.
I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
I creat a specific management pack juste for the rule and the views.
SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
SNMP Service (Windows service) => Disabled
SNMP trap (Windows service) => Disabled
Health Service (Windows service) => Enabled
Port 162 UDP => Open and listenning by the MonitoringHost.exe
Firewall rules => Everythinks is OK
SNMP Trap send version is => 2c
SNMP Monitoring device version is => 2c
I try too many of solution on different web site like :
http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
http://technet.microsoft.com/en-us/library/hh563870.aspx
http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
Thank you in advance.
KimBaxZ
Computer expert system technology

Hello Yan Li,
I read your link, and I found this :
The network devices must be discovered and registered as ICMPSNMP devices.
And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
Have a nice day
Best regards
KimBAxZ
Computer expert system technology

SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012? Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices. We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue. I made sure they were set to SNMP only. I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from. Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process. We have tried having SNMP installed, but disabled, installed and running, and uninstalled. Currently we have the SNMP service installed and running. The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server. I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator. I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor. We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule. The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices. No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

SNMP traps from EMC SRM to SCOM 2012 R2

Hi,
I'm trying to configure SCOM 2012 R2 as an SNMP trap listner. I've seen many articles on setting this up but all are based around SNMP traps from network devices which must first be discovered and identified in the network device list.
However in my scenario I am trying to monitor/listen for traps send by a Linux box hosting EMC SRM - this management software can be configured to send SNMP traps out so it is these that I need to try and listen for/capture.
So can anyone explain how I can configure SCOM 2012 R2 to do this. I have tried to just used the IP of the Linux box and discover it as a network device but it fails - in Network Devices Pending Mgmt it says No response Ping, even though I can
ping the box from the Server OK - so I am guessing you cant cheat scom in discovering the Linux box as a network device in ths way?
Can anyone offer any advice for setting this up. Just to add I've ensured the RunAs Community String (public) and SNMP version is correct on both side...
Cheers...

Once the Network Device (Linux server in this case) is discovered you will still need a rule that targets that class and accepts incoming SNMP Traps for that OID, or All OIDs if you prefer. I found 2 links that may be of help, the first is just a basic
overview of the SNMP listener in SCOM 2012 as it has changed from the OS Listener in 2007 to a dedicated one.
http://systemcentertech.com/2012/05/17/scom-2012-built-in-snmp-trap-listener/
The second link covers SNMP setup, but starting at Step 7 there is a great how-to on creating your own SNMP rule which will be needed to collect your traps.
http://scom-2012.blogspot.com/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
www.Practice2Perfect.com

How to use SCOM 2012 R2 Monitoring the standalone Windows Server

Greetings,
I want to use SCOM 2012 R2 to monitoring the standalone Windows Server that does not joined the domain. would you please guide me how to configure it.
Thanks
Frank@Hiweb 冯立超@瀚博资讯

I found the answer, as following:
http://pkjayan.wordpress.com/2010/05/17/agent-managed-non-trusted-servers-without-gateway/
and
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
Frank@Hiweb 冯立超@瀚博资讯

SCOM 2012 repair and rebuild

Hello Gurus
I have a quick question. I have a SCOM server that is giving me weird errors, I have already posted the question at http://social.technet.microsoft.com/Forums/systemcenter/en-US/b034c553-c1b9-4152-bb77-d9a29906d25c/scom-2012-r2-network-monitoring-error?forum=operationsmanagergeneral#b034c553-c1b9-4152-bb77-d9a29906d25c
but no answers :(
I would have loved to troubleshoot the error but since time is running out, I am thinking maybe to re-install the server. Every other component of SCOM is working, so I was wondering, is it possible for me to keep the other settings and configuration of
SCOM in the new SCOM installation. I want to retain the following specifically:
Management pack and their customization
The workgroup server management certificate
Server inventory
Overrides
Reporting and analysis service
Web console configuration
Account and run as profile configuration.
Alternatively, I am okay if I can only get rid of the network device inventory from the database. I believe the issues that I am facing are because of rogue records of network devices in the database. I am okay with removing them and starting the discovery
of the network devices again.
Any help will be greatly appreciated.
Regards,

Verify that SNMP open in core switch to Management Server {#snmp-server community "Password" username}and verify from string community (case sensitive)
If not worked, Delete Network Device and reconfigure it again
To Delete Network Device, follow the below steps
In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
remove them.
Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
you can also check below link to remove/restore network device
http://technet.microsoft.com/en-us/library/hh212795.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Is there a matrix showing the difference with features of agent vs. agentless in SCOM 2012?

Is there a matrix showing the difference with features of agent vs. agentless in SCOM 2012?

Agent monitoring requires an agent installation on the target machine
Agentless monitoring
An agentless-managed computer is a Windows-based computer that is discovered by using the Operations console. You assign an management server or agent-managed computer to provide remote (proxy) agent functionality for the computers.
Agentless-managed computers are managed as if there is an agent installed on them. Not all management packs work in agentless mode.
Agentless versus Agent-based server monitoring
http://thwack.solarwinds.com/community/solarwinds-community/geek-speak_tht/blog/2013/02/11/agentless-versus-agent-based-server-monitoring
Roger

SCOM 2012 unable to monitor SNMP traps

Similar Messages

Maybe you are looking for