SCOM 2012 with SCDPM 2012 MP

We've SCOM 2012 (without R2...). We need to deploy SCDPM 2012 R2 Management Pack.
My questions are:
1) Is it necessaty deploy SCDPM 2012 R2 central console on SCOM Server?
2) What are the benefits of deploying SCDPM 2012 R2 console?
3) Is there a problema with SCOM 2012 and SCDPM 2012 R2 central console?
4) If I've 4 SCOM servers...Must I deploy SCDPM central console on all SCOM servers ??
Thanks

Install the DPM Central Console on the OpsMgr Management Server
Central Console is a System Center 2012 Operations Manager console that can be deployed to manage and monitor multiple System Center 2012 – Data Protection Manager (DPM) servers from a single location
No, it must working.
No, it not necessary to deploy on all servers
http://www.systemcentercentral.com/quicktricks-where-are-the-dpm-2012-management-packs-scom-scdpm-sysctr/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Similar Messages

  • Some error of COM when I launch Validated configuration before create cluster on hyper-v 2012 with SCVMM 2012 SP1

    Hi everybody,
    I tried to created a cluster with 2 hyper-v Standalone 2012 ( with ISCSI connectivity for the SAN) with scvmm 2012 sp1.
    After the validation testing I have 2 errors and I don't find the answer . I pasted the log at the bottom.
    Thanks for your help.
    Bye.
    An error occurred while executing the test.
    An error occurred while validating the operating system software updates.
    One or more errors occurred.
    Unable to cast COM object of type 'System.__ComObject' to interface type 'MS.Internal.ServerClusters.Validation.IClusterUpdate'.
     This operation failed because the QueryInterface call on the COM component for the
    interface with IID '{E3C9B851-C442-432B-8FC6-A7FAAFC09D3B}' failed due to the following error: No such interface
    supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    ===============================================================================================================================
    An error occurred while executing the test.
    There was an error initializing the network tests.
    There was an error creating the server side agent (CPrepSrv).
    Unable to cast COM object of type 'System.__ComObject' to interface type 'MS.Internal.ServerClusters.Validation.IClusterNetwork2'.
     This operation failed because the QueryInterface call on the COM component for
    the interface with IID '{2931C32C-F731-4C56-9FEB-3D5F1C5E72BF}' failed due to the following error: No such interface
    supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).

    Hi Guillaume Pincon,
    Please first update both server to latest update and turn off the Windows firewall for narrow down this issue then try build the cluster again, one of the cluster create condition is all the servers should have the same software updates (patches) and service
    packs. If all above steps not work please post the second validation error information.
    The related KB:
    Hyper-V: Using Hyper-V and Failover Clustering
    https://technet.microsoft.com/en-us/library/cc732181(v=ws.10).aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Migration of a Windows 2008 Domain to 2012 with SCCM 2012 installed

    Hey there,
    i have been requested to migrate two 2008 Domains to 2012 with a possible merge.
    Done this many times, but in this case i have a SCCM 2012 installed in the Environment.
    SCCM is not covered by me, but i would like to have some aditional Background on this...
    Are there any Special Points to give Attention to?
    Any Hints or Ideas on this?
    Best regards
    Chris
    btw: i still found, that i am not "allowed" to migrate the sccm itself, but Need to reinstall it...

    i have been requested to migrate two 2008 Domains to 2012 with a possible merge.
    Done this many times, but in this case i have a SCCM 2012 installed in the Environment.
    btw: i still found, that i am not "allowed" to migrate the sccm itself, but Need to reinstall it...
    Lets say you have two domains - Domain 1 and Domain 2. Both have W2008 DCs. SCCM 2012 has been deployed to Domain 1.
    You could just upgrade to W2012 DCs in Domain 1, then migrate Domain 2 resources to Domain 1.In this way SCCM is unaffected.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • How to deploy Visual Studio 2012 with SCCM 2012

    Hi All,
    Does anyone know how can I deploy Visual Studio 2012 withc SCCM 2012(step by step).
    Best regards
    Nick

    Hi,
    It worked for me,
    http://fearthemonkey.co.uk/how-to-deploy-visual-studio-2012-using-configuration-manager-2012-and-the-application-method/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCOM 2012 RC - SCVMM 2012 RC - Virtual machine manager management group is not getting monitored

    Hi All,
      I have integrated SCOM 2012 with SCVMM 2012 environment. I could see two strange behaviors. All these instance are running on Windows 2008 R2 + Sp1 OS along with SQL 2008 R2 for database.
    1) I could see two instance of VirtualmanagerDB
    in the Database State view under the Microsoft SQL Server, out of that
    one is showing as monitored and another one is
    showing as not monitored. Why it is showing two instance of the same database? How can I remove the not monitored one?
    2) In the distributed apps- Virtual machine manager management group is not showing as a monitored item. However the SCVMM server is getting monitored.
    I'd appreciate if someone could help me out in understanding and resolving this.
    Regards,
    Ren.

    Hi
    I opened up a connect ticket on this on 17th Jan so sorry for not noticing your post earlier. The response was:
    Health State dashboard view is targeted to two state views. "Agent Watcher State" and "Agent State". "Agent State" view (view with duplicate entry) is targeted to an abstract class "VMM Agent" which has below child classes.
        VMM Library Agent
        VMM Host Agent
        Guest Agent
    For the Dashboard view, we need to taget the view to "Host Agent" not "VMM Agent". When we install VMM, it adds itself as a Library server and that is the reason for duplicate entry (VMM Library Agent).
    Cheers
    Graham
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • SCCM 2012 R2 With MDT 2012 AND MDT 2013 Side by Side

    Currently we're running 2012 R2 CU3 with MDT 2012 integrated into it. We're looking at upgrading to MDT 2013 (whatever the latest update is). What I'm wondering, and can't seem to find any information on, is if we can continue to use our MDT 2012 boot
    .wims/OSD Task Sequences/etc  until such time as we create and test new ones or are we going to have to update everything right away?

    Are you sure you are using MDT *2013* with ConfigMgr 2012 *R2*? That's not a supported configuration and I think there are multiple technical problems with this combination.
    The task sequences themselves don't change -- because they are ConfigMgr task sequences -- but the MDT tasks must be updated to use the MDT 2013 tasks. Boot image use is partially dependent upon the OS you are deploying however only WinPE 3.1 and WinPE 5.0
    based boot images are supported in R2.
    Jason | http://blog.configmgrftw.com | @jasonsandys
    Did you mean to ask if we were running MDT 2012 with ConfigMgr 2012 R2? Then yes we are. We did the upgrade from SP1 CU2 to R2 CU3 a couple of weeks ago but haven't upgraded MDT to 2013 yet. That's our next step but we also don't want to take down/break imaging
    capability if we can help it (major college, staff/students constantly breaking stuff, etc).

  • SCCM 2012 with BranchCache in Microsoft Windowws Server 2012

    Hi  all
    Can anyone tell me about using BranchCache in Microsoft Windowws Server 2012 with SCCM 2012
    how much useful is this ,is it better then NOmad ,as this article suggest
    http://blogs.technet.com/b/brianlewis/archive/2012/11/14/branchcache-in-microsoft-windowws-server-2012.aspx
    after reading this article ,it looks good for WAN traffic which my concern can anyone share his expert comments.?

    More info:
    BranchCache Troubleshooting
    http://social.technet.microsoft.com/wiki/contents/articles/1296.branchcache-troubleshooting.aspx
    BranchCache Overview
    http://technet.microsoft.com/en-us/library/hh831696.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012

    Hi all;
    I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
    version of WSUS than currently installed.  You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
    Thank You...
    MCT

    Normally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
    also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
    also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
    you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
    Thanks
    Hasitha

  • The problem with forecast reports in SCOM 2012 after integration with VMM 2012

    Hello.
    I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
    could not be shown”. I find only errors in SQL Server Reporting logs like this:
    library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
    processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
    запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
    the target of an invocation..
    Query (5, 58) Parser: The syntax for '6' is incorrect.
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
    AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
       --- End of inner exception stack trace ---;
    The Russian string “Не удалось
    выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
    I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
    SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
    SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
    I think the problem in regional settings. By my opinion there are two possible mistakes:
    SQL collation  for all SQL DB instances. May be need use “Latin1_General_CI_AS”
    as provided by
    http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
    Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

    Error: Subreport could not be shown
    Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
    Background
    There are two possible reasons for this error:
    1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
    2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
    Solution
    To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
    If the reporting server is pointing to a wrong location, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing.
    Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
    To verify the correct SQL Server computer and instance path
    In Report Manager, navigate to the report generating the error and click the Properties tab.
    Click Data Sources and under a Shared data source, note the path.
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
    If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
    Click SCDW.
    In the Connection type list, ensure that Microsoft SQL Server is selected.
    In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
    Note:
    A period (.) denotes the local computer.
    If the account has insufficient permissions, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
    schema 'dbo'.
    To determine if you are experiencing the SQL Server permissions issue
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
    If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
    Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
    Click DashboardComputersTrend.
    If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
    To grant permissions to the SQL Server computer
    1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
    2. On the server with the System Center Reporting database, start SQL Server Management Studio.
    3. In the tree, expand Security, and then expand Logins. Do one of the following:
    If the user account is listed, right-click the account, click Properties, and then go to step 5.
    If the user account is not listed, right-click Logins and choose New Login.
    4. In the Login name box, enter the user account (domain\username).
    5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
    6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
    Thanks,
    Yog Li
    TechNet Community Support

  • Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

     hello,
    We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
    Error (10218)
    Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
    packs are present in Operations Manager :
    Windows Server Internet Information Services 2003,
    Windows Server 2008 Internet Information Services 7,
    Windows Server Internet Information Services Library,
    SQL Server Core Library.
    Recommended Action
    To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
     Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
     Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
     You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411 
    Reference link used :-  http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
    Regards
    Richa KM

    Have you imported all of the packs it mentions:
    Windows Server Internet Information Services 2003,
    Windows Server 2008 Internet Information Services 7,
    Windows Server Internet Information Services Library,
    SQL Server Core Library.
    There's a good walkthrough
    here which details all the pre-reqs.
    It was some time ago but i also did a walk-through with pictures
    http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
    Hope this helps

  • Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

    Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

    Hi,
    It is listed here:
    http://technet.microsoft.com/en-us/library/dn281933.aspx
    Configuration Manager 2012 r2 and DPM 2012 r2 does not support AlwaysOn.
    regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

    Hi. Sorry if the answer is obvious, but I need to ask...
    Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
    We currently have SCOM 2007 R2 installed and we'd like to upgrade.
    We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
    We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
    There is currently nothing setup between SCOM and SCCM.
    We're a single forest, single domain shop.  Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
    Thanks for any input.  I appreciate your time and expertize.  Joe.

    Hi,
    I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error while opening SCDPM 2012 r2 console

    Hi,
    on a new SCDPM 2012 R2 UR3 console only the user that performed the installation is able to open the console. All other users are not able to. Those other users are members of local admin group and some also sysadmin on DPM instance of SQL Server.
    Error message appearing: Error ID 948 Unable to connect to <DPM Server>. I checked that all DPM Services are running and that I am able to start the Manual ones. No errors there. I also checked if there are sync Job open, nothing there.
    The only other message I found is a "Information" message in application log - Source: <MSSQLInstance> –Event ID 18456 –Information: Category Login;  Keywords: Classic, Audit Failure
    Login failed for users XXX. Reason: Could not find a login matching the name provided.        It seems to me that there is a permission problem here. I found a similar entry for SCOM. There the problem was that a Domain account
    was used but it was treated as a SQL account (no Domain transfered) against the SQL DB. I am assuming that something like that happens here but I have no idea how to move on. I am not sure what credentials are used against the SCDPM-DB when a user tries to
    log on. Maybe I am going in a wrong direction? Does someone have an idea?

    Hi Sroe,
    they are many causes for a 18456 Event. Can you post the Event Details here?
    Regards
    Matthias

  • Reporting services for SCDPM 2012 R2

    Hi all,
    We are planning to implement SCDPM 2012 R2 with Chained protection concept (DPM1 is the primary and DPM2 is the secondary), here my question is it possible to host both (two) SQL reporting services in same instance ? 
    Thanks,
    Sengottuvel M

    Hi,
    What's new in System Center 2012 - DPM
    Starting with DPM 2012 we added support for multiple DPM servers to share one instance of SQL Server for DPMDB.  This also means that they will share the same SQL reporting.  You should not use that shared instance for any other purpose.
    Seidl Michael | http://www.techguy.at |
    twitter.com/techguyat | facebook.com/techguyat

  • Restore Online Backup in SCDPM 2012 R2

    Dear all,
    i have a question on SCDPM 2012 R2 + Azure Backup.
    i had deployed such solution and disk backup are perfect! However, i had configured online backup policy to Azure Backup since February and i noticed i do not have the options to allow me to perform online restore!
    Below is my online protection policy:
    i believe i configured it correct to adhere below policy:
    - perform a monthly backup and keep for ONE year
    - perform a yearly backup and keep for SEVEN years
    but when i go to recovery tab, it just doesnt show February backup, nor March 2nd have any backup. all the backup available are disk short term of 30 days.

    Hi DeVaLiaN,
    Thanks for posting here!
    Each DPM backup to Azure Backup is a recovery point. With an Azure current limit of 366 recovery points your retention time for all backups shouldn’t exceed the 366 limit. In other words the retention times you set for you daily + weekly + monthly
    + yearly backups should sum up to 366 or less.
    You might want to double check your configuration.
    Refer to the below listed articles which might help you narrow down the issue.
    http://blogs.technet.com/b/systemcenter/archive/2014/03/16/using-azure-backup-with-dpm.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/19751.system-center-2012-data-protection-manager-dpm-sp1-part-4-backup-to-azure.aspx
    https://msdn.microsoft.com/en-us/library/azure/dn337332.aspx
    Hope this helps!
    Regards,
    Sadiqh

Maybe you are looking for