SCOM 2012R2 - Is there a way to alert when subscriptions have stopped

Hi,
I have had subscriptions stop in the middle of the day for no apparent reason.
Rebooting the SCOM boxes fixes it (not good I know).
Is there a way for SCOM to alert if subscriptions (emails) are not working, even though alerts are being generated?
Thx,
John Bradshaw

Thx SK
All the above were fine....Eventually I rebooted everything and emails flooded in,
but my question is, how to monitor when emails are not sending/coming in?
As an example: Is there a way to monitor if an email has not been received in an Outlook folder from a certain sender for say 60 minutes? If an alert can be figured out for that, then, since SCOM sends so many (and I get them all), then a blank period of
60 mins in my Outlook SCOM folder would tell me something is not right.
Ta,
JB

Similar Messages

Is there a way to create a subscript and/or superscript in FRS?

Is there a way to create a subscript and/or superscript in FRS?

I've done some more searching and understand there are programs that extract the info out of an email. I believe they are called email parsers. Anyone have any more info on this? If so, any suggestions for a program that I could use? Thanks again.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Is there a way to check if I have either deleted a necessary file or...

Firstly, let me apologize for this rather long post. I just want to make sure I give as much detail in order to get the problem really solved...
I have a MacBook Pro 2GHz Intel Core Duo with 512 MB of ram. I am running OS 10.4.10 and don't have the means to either upgrade the OS, increase ram or even backup and reinstall (I am in a remote part of the South Pac. Islands, working as a relief worker, without much more than a dish to connect to the net).
Now while I know that QuickTime has nothing to do with WMA files and that Flip4mac is the solution of record, allow me to pose my problem (because I can't get a straight answer on other forums whose only suggestion is to reinstall their software).
I have been using Flip4Mac QuickTime components successfully (to save radio streams) for over a year without a single problem with various versions of Quicktime. Presently, i use QuickTime version 7.6.0 and all was working fine until a few weeks ago. QuickTime works fine in every other way with the exception of playing my saved streams that contain WMA audio.
I believe I might have created the problem by either... ignorantly deleting files with a tool that allows me to examine the hard drive (including system files) in order to delete large ""unnecessary"" files... or even possibly, it occurred when questionable-content was auto-opened via QuickTime (which incidentally had caused the system to crash requiring a hard keyboard shutdown and restart). The problem occurred soon thereafter.
i have un-installed and re-installed QuickTime, Flip4Mac and even Windows Media Player for Mac several times with no change. i also ran several virus / disk scans (VirusBarrier, ClamXAV, MacScan, as well as TechTool, Mac HelpMate and MainMenu) also with no change.
The dialog box that pops up when I attempt to open ANY past saved QuickTime files basically says, QuickTime Player is 'missing a component.' This window doesn't always popup. Also the player will advance the minutes and seconds without playing a sound. Further any app that relies on WMA files also crashes, quits or just doesn't work. Such as WMA to MP3 converters. I even have problems with sounds / music from a couple of MacGames that I own (Luxor & Hidden Relics) as these games may rely on WMA to function (this may or may not be related).
My question is... is there a way to check if I have deleted a necessary codec, system file, pref. file, receipt, etc. that is crucial to using WMA?
Or even is there a way to check if some erroneous file has been added to my system (such as a DRM plugin) that is preventing the playing of my saved streams?
Once again, as I mentioned above, I am unable to backup and reinstall OSX and am at the end of my rope. The only thing that is left for me to say is.... Heeeellllppp!
Message was edited by: C. Angel

Tap on the URL to get to edit mode.
Then slide your finger over the URL to the right until you see the http or https part.
Or copy the URL and paste it into free Notes page.
For https URLs there is a padlock in the status bar above the URL.
If you believe that this sounds complicated, then I agree.
Perhaps someone will chime in with an easier solution...

Is there a way to view when gift cards were added so you can see what they were spent on?

Is there a way to view when gift cards were added so you can see what they were spent on?

No, you can't view a list of gift card redemptions, you can only view your account's purchase history : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases - if you select a link on that history then it should show how it was charged e.g. mine show 'Store Credit' as I only use gift cards

Is there a way to import images that have been edited and assign them to the original?

I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
-- Stick the originals in one Project(s) and the edited versions in another Project(s).
-- Stick them all in the same Project(s) and "Stack" them.
But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
So, what is most valuable to you?
-- The original, out of camera files? (That is, the fear/need to revert.)
-- The edited versions? (That is the hours of work that it took you to get there.)
If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
Of course, you can do a bit of both.
Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
Good luck!

Is there a way to see when a plugin was last used so it could be determined if that plugin could no longer be needed?

is there a way to tell if a plugin is no longer needed. In other words is there a way to tell when it was last used to determine if it should be deleted. for instance iphoto6,

the 4-5th digits of the serial number indicate week of production
ie 82327 = week 27 of the year.

Is there a way to new when phone numbers have been added

is there a way to new when phone numbers have been added

I have a Contact that I created called "Do Not Answer" All the phone numbers that I do not need to answer are placed within this contact.
I created a 10-Second-Silence ringtone that is used for this contact. Set Vibration to "None" and Text Tone to "None" as well. This will shut down any tones or vibrations if you receive a call or text.
Add any appropriate "NO' sign as a contact picture if you like as a visual reminder to not pick up the call. I use this:
Any callers listed under this 'Contact' will be eventually sent to your email without disturbing you. Other then that, there is no easy "Kill-file" within the iPhone of which I am aware.
Best of Luck

HT201317 Is there a way to tell when a photo in your photo stream was taken?

Is there a way to tell when a photo was added to photo stream. How do photos appear on photo stream? Are they downloaded from my iPhone when I save a picture that was texted to me? Do they then go right into my photo stream?

Photos added to camera roll are added to your photo stream (when the camera app is closed, you are connected to wifi and you have at least 20% battery life remaining). When you save a photo from a text message it is saved to your camera roll, and is therefore also added to your photo stream. You can't, however, tell when such a photo was added.

I forgot my passcode and now i am locked out...is there a way i can request to have the pass code un locked by sending it to my email trhat is registered with Apple? what to do?

I forgot my passcode to my iphone...what an i do?

s there a way i can request to have the pass code un locked by sending it to my email trhat is registered with Apple?
No
what an i do?
Restore your phone and set it up from scratch.

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded?

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded? This would be a great way to manage supplier questionnaires to ensure everyone is providing information back to you.

FormsCentral, itself, does not have a method of distributing forms, so it would not know about your distribution list. It's either an open online form, which can be gotten to by anyone with the URL, or it's a pdf, which could be distributed via e-mail or a web page download.
You can always track the completion of the form by looking in the form's collected data set. Then, you could work backward to contact those recipients who have not yet responded. But that means you need to keep track of where the form was sent, or at least know which people/companies were supposed to get the form.
I hope that helps,
Brian

Is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in the 2nd season of "homeland," the 5th season of "damages" and the 7th season of "dexter." thanks.

is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in:
     the 2nd season of "homeland,"
     the 5th season of "damages"
     the 7th season of "dexter."
thanks.

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

Is there any way to recover photos you have deleted from iphoto trash?????

Is there any way to recover photos you have deleted from iphoto trash;ie emptied trash..

Depends on the version of iPhoto - some details would help us help you
If you have iPhoto '11 then the photos go from the iPhoto trash to the system trash and you can recover them there and import backinto iPhoto
Otherwise you you are looking at data recovery software like file salvage http://subrosasoft.com/software/filesalvage or a data recovery service
LN

Upgraded to iOS 7, now I do not get alerts when I have voicemails...what can I do?

My wife and I upgraded to iOS seven approximately two weeks ago. But now we do not get alerts when we have voicemails waiting. Also we do not have visual voicemail.... My daughter upgraded to iOS 7 around the same time. And has no problems with either settings. We both upgraded to 7.0.2 approximately one week ago. Did that cause everything to go awry? What should do?

Hi there volpone1a,
You may want to double check the notification settings on your device. Take a look at the article below for more information.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
-Griff W.

SCOM 2012 - Is there a way to create a class/target/group based on the presence of a folder?

I need to create monitor(s) for an application, but the application services are different on all the servers. Usually I would find a application service that is common among all the servers I want to monitor to create the target,
but this does not exist. There are no common services for this application. However, every server does have a common folder in the Program Files on the C: drive (i.e. "xyz" folder exist on every server for the application).
Is there a way to create a target based on a folder in the Programs Folder?

Please refer to the following, which is quite exactly fit your requirement.
http://msdn.microsoft.com/en-us/library/bb437613.aspx
Roger

SCOM 2012R2 - Is there a way to alert when subscriptions have stopped

Similar Messages

Maybe you are looking for