SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar
Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Admin/Index2.aspx"
Any ideas???From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime.
You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.@ reichard
yeh man i have the same problem i think when i open the ****** facetime it dosent open there is a line in facetime icon it dosent open i dont know how it work **** i want it to work hope someone help me thx -
I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!
This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed. It's a good idea to have your location setting on automatic. Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location. Do this even though you have the correct time Date settings displayed.
-
Hi; Attempting to upgrade to version 10.5.x, but I keep on getting an error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??
Needing to upgrade to allow connection of a 4S iPhone to the Laptop.
Thanks!! - Tim.Repair your Apple Software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU in all program, you can do it in CONTROL PANEL, ADD N REMOVE PROGRAMS. -
What do I do when I create a pdf and it says fatal error, there is a problem with the background task
see Adobe Community: File Crashing on Output - printing/PDF/other
-
There was a problem with FaceTime. You need to quit and open FaceTime again.
HELP!!
"There was a problem with FaceTime. You need to quit and open FaceTime again." pops up everytime i try and open facetime!
I have tried doing everything that people have posted to try and fix this problem...NOTHING has helped!
what do i do!?!?I got it to work, by observing and doing the following...
1) Console showed a permissions error accessing ~/Library/LaunchAgents/com.apple.imagent.plist. Turned out that folder was empty and only 'system' had access to write to it, so I set my main user as having read and write access (Get info on the folder, add the user at the bottom under permissions)
2) Still wouldn't work, but I saw something about imagent. Searched my hard drive via terminal for it, and found that inside the FaceTime app is an imagent.app. So, I launched that. It has no interface but shows up on the Dock.
3) Launched FaceTime. Yay! It works! BUt I have to launch imagent manually first.
4) Went back to ~/Library/LaunchAgents and deleted the com.apple.imagent.plist file which was still at 0 bytes. The next time I launched FaceTime, it created that file, and didn't need imagent.app to launch manually.
Your mileage may vary, because you may have different errors. -
500 internal server error - OWA when trying to open options - Exchange 2010
Hello,
I have been in the process of setting up our new exchange 2010 server and have found the following issue. I can log into the secure OWA site without issue and can send and receive emails fine. When i attempt to select any "option" such
as set automatic replies or see all options I receive the following error message -
"500 internal server error there is a problem with the resource you are looking for, and cannot be displayed".
I have verified that all required exchange servicesare running.
I am running exchange 2010 sp3 on server 2012.
I think it may an issue within IIS but i'm not sure
Any help would be appreciated.
ThanksHi,
According to your description, there is a 500 internal server error when you select any Option in your OWA.
Based on my research, we can try the following steps:
1. Check whether Virtual Directories Authentication configured properly. Enable the ECP Virtual Directory with Anonymous and Basic Authentication.
2. Check on the Application Pools to view whether ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
If so, We can try to run the following command as Administrator:
%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS.
If you have any question, please do not hesitate to tell me.
Hope it helps.
Thanks,
Winnie Liang -
Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advanceHi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support -
Error: There is a problem with the file and it cannot be copied
I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything! -
I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?
There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit -
Photosmart 7520 error. there is a problem with the printer. turn printer off then on.
I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this. -
500 Internal Server Error when including a JSP withing a Report JSP
Hello,
Please help me. Thanks in advance.
My setup is entirely 10g. (Database, Application Server - Infra, OC4J etc)
When i am trying to include the content of a normal JSP within a Report JSP, i am getting an Internal Server Error.
Am attaching the trace here.
[Thu Aug 04 23:25:06 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183506781,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:42 2005] [notice] FastCGI: process manager initialized
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0085: connect() returns: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0088: connect() returns error: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (0)The operation completed successfully:
MOD_OC4J_0051: Tried 1 times and failed to connect to oc4j with worker: home_15.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0030: Failed to connect an
oc4j process. This request is recoverable.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0026: Failed to marshal a request
to ajp13 message headers or send them to the web container.
Kindly reply a solution soon. I am in an urgent need to resolve this.
Thank you very much.
Regards
ABHello,
Please help me. Thanks in advance.
My setup is entirely 10g. (Database, Application Server - Infra, OC4J etc)
When i am trying to include the content of a normal JSP within a Report JSP, i am getting an Internal Server Error.
Am attaching the trace here.
[Thu Aug 04 23:25:06 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183506781,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:42 2005] [notice] FastCGI: process manager initialized
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0085: connect() returns: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0088: connect() returns error: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (0)The operation completed successfully:
MOD_OC4J_0051: Tried 1 times and failed to connect to oc4j with worker: home_15.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0030: Failed to connect an
oc4j process. This request is recoverable.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0026: Failed to marshal a request
to ajp13 message headers or send them to the web container.
Kindly reply a solution soon. I am in an urgent need to resolve this.
Thank you very much.
Regards
AB -
Since i upgraded my ipad to 7.0.2 there is a problem with the photo images are
can any one help my ipad photographs are now low quality with the a serious problem with the colours, this has all happened since i upgraded to 7.0.2
Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.
Maybe you are looking for
-
Hello There, I have written an Outlook Add-In to add several User Properties to our incoming emails. This add-in will be installed in 100 computers in different states and our Exchange server is hosted in our datacenter in CA. Everything works great
-
On PC: I cannot download adobe cloud desktop app nor any other produkt.
When I am trying to download the adobe cloud for desktop, there is always an error while downloading and I can't find a solution. So I guess I can't install any produkt like photoshop if I don't have the desktop version? I really need those for a pro
-
Hello peeps, Just a quick problem i need to solve to protect my sanity. In the recent weeks my ipad 3 has been closing apps un expectedly, this is driving me mad. Sometimes they close to my home screen and are actually still running but when i clic
-
Cannot place in illustrator or photoshop from bridge
Don't see file>place commands for illustrator or photoshop in bridge... Just dreamweaver and indesign Also.. lost all photo processing command under the tools menu. Any input would be appreciated
-
Dynamic Parameters to DB Adapter
What are the different methods to pass dynamic parameters to DB adapter ?